LordSith82 Posted September 3, 2016 Share Posted September 3, 2016 Hello at all! I've installed Yosemite 10.10.5 from Apple Store with pandora's box. After install I've put the amd kernel (Bronya kernel_10.10.5_rc4), system.kext and the other amd kext and I've installed fakesmc, voodoohda, etc etc with pandora's post install. Permission repaired, kernel prelinked done. I've installed enoch in Efi partition with common boot flags. But... I receive stuck on usbmsc identifier (non-unique)! Con you help me? Link to comment Share on other sites More sharing options...
spakk Posted September 3, 2016 Share Posted September 3, 2016 Please upload the image which prevents to boot your system completely. Pictures give more information than many words 1 Link to comment Share on other sites More sharing options...
LordSith82 Posted September 3, 2016 Author Share Posted September 3, 2016 This is my boot... Link to comment Share on other sites More sharing options...
spakk Posted September 3, 2016 Share Posted September 3, 2016 could you write your hardware specification. further take all USB hardware that are not necessary for the boot for yosemite out from the USB slots and try to boot again. alternatively upload their config.plist or org.chameleon.boot.plist and the Extensions folder of Extra folder or the 10.10 folder from clover. 1 Link to comment Share on other sites More sharing options...
LordSith82 Posted September 3, 2016 Author Share Posted September 3, 2016 On USB I have the mouse and keyboard only. This is my hackintosh config:- CPU AMD FX 8320- MB Asrock 970 Extreme3 ‐ Socket Am3+ ‐ Chipset 970 ‐ Atx- Kingston Technology HyperX PnP 16GB DDR3‐1600MHz Kit- Asus Geforce 210 Silent - 1 Gb Gddr3 - Pci-Express 2.0 (En210 Silent/Di/1Gd3/V2(Lp))- 2 x Seagate ST1000DM003 Barracuda HardDisk- Akasa AK‐ICR‐11 Lettore di schede interno (8,9 cm (3,5 pollici), 6x slot, Bluetooth, USB 2.0)- Itek Case iZOO Pure Black Med Tower ATX 500W Full Black- Samsung SH‐224DB/BEBE Masterizzatore DVD‐RW- Benq 24" IPC fullhd- Bootloader: Enoch installed to ESP- Installation Method: USB (Pandora's box 3) Extra.zip Link to comment Share on other sites More sharing options...
spakk Posted September 3, 2016 Share Posted September 3, 2016 It lacks the Extra/Extensions folder, I check what drivers need to be installed based to your hardware specification. Then I'm going to upload a package. 1 Link to comment Share on other sites More sharing options...
spakk Posted September 3, 2016 Share Posted September 3, 2016 use this and report Extra_new.zip 1 1 Link to comment Share on other sites More sharing options...
LordSith82 Posted September 3, 2016 Author Share Posted September 3, 2016 use this and report In EFI partition or not? Link to comment Share on other sites More sharing options...
spakk Posted September 3, 2016 Share Posted September 3, 2016 from which you boot .... Add all to Extra folder I have integrated your Gt 210 with an efi-string in the boot.plist, possibly the GT210 was the cause in addition to the missing driver.? 1 Link to comment Share on other sites More sharing options...
LordSith82 Posted September 6, 2016 Author Share Posted September 6, 2016 from which you boot .... Add all to Extra folder I have integrated your Gt 210 with an efi-string in the boot.plist, possibly the GT210 was the cause in addition to the missing driver.? With your extra my system boot, but when I remove nv_disable my system is very unstable and lagged. And... I don't have lan network. Link to comment Share on other sites More sharing options...
spakk Posted September 6, 2016 Share Posted September 6, 2016 oh sory, forgot to insert the lan driver . Please use the lan driver from your older Extra /Extensions folder. 1 Link to comment Share on other sites More sharing options...
LordSith82 Posted September 6, 2016 Author Share Posted September 6, 2016 oh sory, forgot to insert the lan driver . Please use the lan driver from your older Extra /Extensions folder. Ok. And for nvidia? Link to comment Share on other sites More sharing options...
spakk Posted September 6, 2016 Share Posted September 6, 2016 ...oups...can you install teamviewer and send me your id /password to to my privatbox, then I will check. Ok. And for nvidia? I have seen the bootflag in boot.plist, is intended only for the first start of OS X. so boot with OS X, then install the WebDriver, then change the bootflag "nv_disable=1" into "nvda_drv=1" for Ethernet, use this: http://www.insanelymac.com/forum/files/file/88-realtekrtl8111-binary/ Nvidia Webdriver Updater, use this: http://www.insanelymac.com/forum/files/file/474-nvidia%C2%AE-webdriver-updaterapp/ 1 Link to comment Share on other sites More sharing options...
LordSith82 Posted September 8, 2016 Author Share Posted September 8, 2016 No lan. The kext load but no ip. Link to comment Share on other sites More sharing options...
spakk Posted September 8, 2016 Share Posted September 8, 2016 please open dpcimanager.app or systeminfo.app and check the built-in ethernet card maybe you need a different driver uploade the images in which you can read the hardware vendor and device-id Link to comment Share on other sites More sharing options...
LordSith82 Posted September 8, 2016 Author Share Posted September 8, 2016 The card is rtl8111, work oob in Mavericks and El Capitan. But with Yosemite I have this problem... Link to comment Share on other sites More sharing options...
Shaneee Posted September 8, 2016 Share Posted September 8, 2016 Use this for the LAN, https://www.dropbox.com/s/tn8nwnrv1y7f5zp/RealtekRTL8111.kext.zip?dl=0 1 Link to comment Share on other sites More sharing options...
LordSith82 Posted September 8, 2016 Author Share Posted September 8, 2016 Tomorrow I'll test it. Thank you. 1 Link to comment Share on other sites More sharing options...
LordSith82 Posted September 9, 2016 Author Share Posted September 9, 2016 Recognized but still disconnected. Link to comment Share on other sites More sharing options...
Shaneee Posted September 9, 2016 Share Posted September 9, 2016 EthernetBuiltIn=Yes Also remove the interface from the settings save then reboot. Re add it if needed. 1 Link to comment Share on other sites More sharing options...
LordSith82 Posted September 9, 2016 Author Share Posted September 9, 2016 EthernetBuiltIn=Yes Also remove the interface from the settings save then reboot. Re add it if needed. Yes and yes, no luck! This system with El Capitan and Mavericks is ok... But with this 10.10.5... No luck! Link to comment Share on other sites More sharing options...
Shaneee Posted September 9, 2016 Share Posted September 9, 2016 I assume you've tried the same method that worked for both of them on Yosemite? If yes I'm not sure what else to suggest. Is the network set to auto config? 1 Link to comment Share on other sites More sharing options...
LordSith82 Posted September 9, 2016 Author Share Posted September 9, 2016 I assume you've tried the same method that worked for both of them on Yosemite? If yes I'm not sure what else to suggest. Is the network set to auto config? On el capitan and mavericks works oob.The eth is in dhcp mode. But the system says cable disconnect... I tested various version of rtl8111 kext, removed the en0 on system prefs, reboot, recreate en0... no luck! When the icon glitchs in el capitan with fx is resolved I'll trash yosemite! Now I can use Mavericks only... Link to comment Share on other sites More sharing options...
Shaneee Posted September 9, 2016 Share Posted September 9, 2016 Have you tried this kext? http://lnx2mac.blogspot.co.uk/p/realtekrtl81xx-osx-driver.html Link to comment Share on other sites More sharing options...
LordSith82 Posted September 9, 2016 Author Share Posted September 9, 2016 Have you tried this kext? http://lnx2mac.blogspot.co.uk/p/realtekrtl81xx-osx-driver.html Genius!!!! Link to comment Share on other sites More sharing options...
Recommended Posts