Dylan9999 Posted June 21, 2017 Share Posted June 21, 2017 Haha, here were 400 reboots in one month period (12h/day), I have tried all distros from MLion further. Then stopped fooling around and went back feeding kids. The best I have achieved (for stable) was a working Yosemite (w/o patching dsdt/ssdt) with only one cpu and gtx950. I didn't manage to install El Capitan because at the time I didn't understand the prohibit logo at setup. Now I know that usb had stopped functioning. I am very satisfied with this Sierra built on Z620. Dual Xeon on mac and 96Gb RAM are great There are some geekbench3 results on Z620 if anybody is intrested in... all are w/o patching dsdt/ssdt 1 Link to comment Share on other sites More sharing options...
wham17wham Posted June 21, 2017 Share Posted June 21, 2017 Haha, There are some geekbench3 results on Z620 if anybody is intrested in... all are w/o patching dsdt/ssdt Could you provide cinebench R15 scores for reference? Thanks. Link to comment Share on other sites More sharing options...
Dylan9999 Posted June 21, 2017 Share Posted June 21, 2017 Your scores are OK I think.. 1 Link to comment Share on other sites More sharing options...
wham17wham Posted June 22, 2017 Share Posted June 22, 2017 Your scores are OK I think.. Thank you ! For performance issue, In my opinion, if you can show "CPU works 3GHZ during Cinebench testing". There are no performance issue. I found the answer was in your picture but it trimmed at right hand side. (#46) Cheers. Link to comment Share on other sites More sharing options...
Dylan9999 Posted June 24, 2017 Share Posted June 24, 2017 As far as I understand you would like to be sure that my CPU works on 2.97 GHz on full load. If that's so, you can see it on the attached image. 1 Link to comment Share on other sites More sharing options...
kumaroli Posted July 25, 2017 Share Posted July 25, 2017 @Dylan9999, could you please post your Geekbench 4 scores? Link to comment Share on other sites More sharing options...
Dylan9999 Posted July 26, 2017 Share Posted July 26, 2017 here Link to comment Share on other sites More sharing options...
ho520726 Posted July 29, 2017 Share Posted July 29, 2017 I already succeed to install mac 10.11 on my Z820, thanks for Bilbo for sharing this post. But I wanna know anyone succeed to update or install mac 10.12 on Z820? Cause I want to use xcode 9 and it required mac 10.12. Link to comment Share on other sites More sharing options...
kuroshe Posted July 29, 2017 Share Posted July 29, 2017 Thanks Bilbo for the Guide, i manage to install and complete all the fixes, firewire, PM, usb, but can't get audio to work, can u guys help me out? thank u Link to comment Share on other sites More sharing options...
kuroshe Posted July 30, 2017 Share Posted July 30, 2017 Nevermind guys i fix audio with voodoo 2.8 , now i got a fully functional hackintosh, thanks a lot for the guide Bilbo Link to comment Share on other sites More sharing options...
kumaroli Posted August 1, 2017 Share Posted August 1, 2017 My GeekBench 4 scores. Everything works including audio - except for USB3. Will attempt to fix USB3 next. Thanks a lot for the excellent guide. Link to comment Share on other sites More sharing options...
kuroshe Posted August 2, 2017 Share Posted August 2, 2017 Hi kumaroli, is LSI working? and did u use all the fixes? thanks Link to comment Share on other sites More sharing options...
bilbo Posted August 18, 2017 Author Share Posted August 18, 2017 I have read some people about problems with audio. I've just check the section on my guide and I think all info is explained. I know it's hard, but be patience and follow the guide step by step. But maybe there is something wrong or bad explained because of my bad English. Please, tell me when you stuck, and I'll try to fix the guide. Link to comment Share on other sites More sharing options...
kumaroli Posted August 19, 2017 Share Posted August 19, 2017 @kuroshe, sorry for the late reply. I don't have the LSI card. I use FreeBSD ZFS for storage (on a different system that's on a dedicated 10gbit network) Link to comment Share on other sites More sharing options...
wham17wham Posted August 19, 2017 Share Posted August 19, 2017 Dear bro, I got kernel panic after update 10.12.5---->10.12.6 please help. Link to comment Share on other sites More sharing options...
spakk Posted August 19, 2017 Share Posted August 19, 2017 Dear bro, I got kernel panic after update 10.12.5---->10.12.6 please help. Kernel Panic in Backtrace with AppleIntelCPUPowerManagement.kext according to your picture you have posted. See the first page, in the tutorials is written: „Now we are going to install the tool to check our C and P - states. The usual tools are the AppleIntelCPUPowerManagementInfo.kext or the most recent the AppleIntelInfo.kext , they both from piker. But none of them work. They cause a kernel Panic in our PC. Fortunately, one user from this forum patched a right version a time ago. I don’t know the kind of patch , and if it depends of the architecture , bios (msr-locked) or whatever. It’s and old version, but it works.“ Delete or remove the Apple standard AppleIntelCPUPowerManagementInfo.kext from S/L/Extensions and replace it with this one here: http://www.insanelymac.com/forum/topic/295200-testers-needed-cpu-power-management-for-sb-and-ib-xeons-or-i7-39xx-on-x79-or-c60x-chipset/page-3?do=findComment&comment=1986508 then repair the permissions and refresh the kernel cache. Edit: and check your bootargs Link to comment Share on other sites More sharing options...
kuroshe Posted August 19, 2017 Share Posted August 19, 2017 @kumaroli thank you anyway, am still on el capitan and i want to upgrade, i guess i will have to buy a pci to sata card, is everything else working? Link to comment Share on other sites More sharing options...
Iloves73g Posted August 23, 2017 Share Posted August 23, 2017 Thanks Bilbo, great post. I followed your post, and I get Sierra 10.12.16 works on my Z820 now. My Z820 HW Spec: 2X E5-2660 V2, 20 CPU Cores. 1X EVGA GTX 1060 Graphics, card 8X16G DDR3 memory, 1X512G SSD, 1 LSI 9260-8I Raid card (I abandoned the LSI 2308 for it can not work on Sierra). The system works stable, but I have the following problems. Firewire can not work : if we using FixHPET option in Clover ACPI options, firewire can not be found. But if you don't us this fix option, although we can see firewire, system will reboot in about 30 seconds. USB 3.0 can not work. Sound card can not work with AppleHDA, my workaround is using voodooHDA 2.8.6, but poor quality of sound. I have to use USB earphone. I have DSDT, SSDT. Some versions of hack drivers have bugs and will make system crack, so I have tried many versions. See the picture of my system I attached. Now I can use Sierra to run latest Xcode version on my Z820, I don't have to always transfer to my Macbook pro. That's great. If someone can help me to solve this problem, I will be very happy:) snapshot of my Sierra on Z820. Link to comment Share on other sites More sharing options...
kuroshe Posted August 23, 2017 Share Posted August 23, 2017 how did you get LSI to work? Link to comment Share on other sites More sharing options...
Iloves73g Posted August 23, 2017 Share Posted August 23, 2017 using this: SASMegaRAID.kext Open the DSDT. Locate Devices IPCI, TIMR and RTC (use search function). IPCI should be IPIC Now firewire works. The reason is that I could not find IPCI, after change it to IPIC, I rm the IRQ in DSDT and then it works. Dear bro, I got kernel panic after update 10.12.5---->10.12.6 please help. Drop your SSDT.aml and boot to your system and then try to regenerate your SSDT.aml using ssdtPRGen.sh. The latest version of ssdtPRGen may not work, try using another version from author's website. Link to comment Share on other sites More sharing options...
bilbo Posted August 26, 2017 Author Share Posted August 26, 2017 Open the DSDT. Locate Devices IPCI, TIMR and RTC (use search function). IPCI should be IPIC Thanks, guide fixed USB 3.0 can not work. Sound card can not work with AppleHDA, my workaround is using voodooHDA 2.8.6, but poor quality of sound. I have to use USB earphone. ... Some versions of hack drivers have bugs and will make system crack, USB3 Anyone has native usb3 working. The simplest way is add one usb3 pci card. But I´d like fix this also. AUDIO I quote myself: I have read some people about problems with audio. I've just check the section on my guide and I think all info is explained. I know it's hard, but be patience and follow the guide step by step. But maybe there is something wrong or bad explained because of my bad English. Please, tell me when you stuck, and I'll try to fix the guide. ...But maybe with Sierra the proccess had to be updated Drivers: It´s a known problem. The lsi 2308 hacked drivers don't work on SIerra Link to comment Share on other sites More sharing options...
aphid Posted September 6, 2017 Share Posted September 6, 2017 Just joining the party - I just got a used Z620 (dual 2660v2) with a Quadro M4000 that I'm trying to get Sierra on. This isn't my first Hackintosh, but this machine makes it much more complicated than the forgiving GA-H77-DS3H board... So far no success (USB installer KPs at AppleIntelCPUPowerManagement.kext), but I'll get there, eventually... Link to comment Share on other sites More sharing options...
asiansurf Posted September 8, 2017 Share Posted September 8, 2017 Just joining the party - I just got a used Z620 (dual 2660v2) with a Quadro M4000 that I'm trying to get Sierra on. This isn't my first Hackintosh, but this machine makes it much more complicated than the forgiving GA-H77-DS3H board... So far no success (USB installer KPs at AppleIntelCPUPowerManagement.kext), but I'll get there, eventually... Greetings aphid, Just follow the Z820 instructions to the letter and you should be able to get it working on your machine. You'll definitely get there eventually!! Enjoy your Sierra on your "MacPro"! I'm a total newbie for this but great at following instructions. I'm waiting (patiently) for a set of instructions for Sierra and hopefully High Sierra for the Dell Precision T7910 for my next Hackintosh! Good luck! Link to comment Share on other sites More sharing options...
kumaroli Posted September 8, 2017 Share Posted September 8, 2017 For anyone trying to get the native USB 3.0 ports to work, I would recommend buying this PCI-E card: Ableconn PUSB31P2A USB 3.1 Gen 2 (10 Gbps) 2-Port Type-A PCI Express (PCIe) x4 Host Adapter Card - Support Mac OS X 10.12 Sierra and Windows 10/8 Works like a charm OOB on the latest Sierra release. It costs around US $30.00, but you get the latest gen2 10gbps USB 3.1 connectivity. You can pick either Type-A, Type-C or Type-A and Type-C mixed depending on your needs. 1 Link to comment Share on other sites More sharing options...
wham17wham Posted September 20, 2017 Share Posted September 20, 2017 It happened twice. *** Panic Report *** panic(cpu 8 caller 0xffffff801f9ff2dd): Kernel trap at 0xffffff7fa035c592, type 0=divide error, registers: CR0: 0x000000008001003b, CR2: 0x00007ff1b0c0e7c0, CR3: 0x0000000034604000, CR4: 0x00000000000626e0 RAX: 0x000000000000005d, RBX: 0xffffff813b6ea800, RCX: 0x0000000000000000, RDX: 0x0000000000000000 RSP: 0xffffff8e30963da0, RBP: 0xffffff8e30963e40, RSI: 0xffffff814e1bae00, RDI: 0xffffff814e1baf00 R8: 0x00000000045d2001, R9: 0x0000000000000000, R10: 0x000000000ec00000, R11: 0xffffff8e30716058 R12: 0x0000000000000000, R13: 0xffffff81238bc000, R14: 0x0000000000000000, R15: 0x000000000000005e RFL: 0x0000000000010246, RIP: 0xffffff7fa035c592, CS: 0x0000000000000008, SS: 0x0000000000000010 Fault CR2: 0x00007ff1b0c0e7c0, Error code: 0x0000000000000000, Fault CPU: 0x8, PL: 1, VF: 0 Backtrace (CPU 8), Frame : Return Address 0xffffff8e30963a30 : 0xffffff801f8ea53c 0xffffff8e30963ab0 : 0xffffff801f9ff2dd 0xffffff8e30963c90 : 0xffffff801f89b593 0xffffff8e30963cb0 : 0xffffff7fa035c592 0xffffff8e30963e40 : 0xffffff7fa0354616 0xffffff8e30963ee0 : 0xffffff801febc69f 0xffffff8e30963f30 : 0xffffff801febaf01 0xffffff8e30963f80 : 0xffffff801feba4e6 0xffffff8e30963fb0 : 0xffffff801f8988f7 Kernel Extensions in backtrace: net.osx86.kexts.GenericUSBXHCI(1.2.11)[00000000-0000-0000-0000-000000000000]@0xffffff7fa034c000->0xffffff7fa0363fff dependency: com.apple.iokit.IOUSBFamily(900.4.1)[D403C49A-FBF5-35DE-9A92-F282BCF5E0E9]@0xffffff7fa02a0000 dependency: com.apple.iokit.IOPCIFamily(2.9)[bD9FCDEF-30CB-3911-B247-EE51DD069C76]@0xffffff7fa004f000 BSD process name corresponding to current thread: kernel_task Boot args: npci=0x2000 nvda_drv=1 kext-dev-mode=1 cpus=32 Mac OS version: 16F73 Kernel version: Darwin Kernel Version 16.6.0: Fri Apr 14 16:21:16 PDT 2017; root:xnu-3789.60.24~6/RELEASE_X86_64 Kernel UUID: FB2170A8-257D-3C64-B14D-BC06CC94E34C Kernel slide: 0x000000001f600000 Kernel text base: 0xffffff801f800000 __HIB text base: 0xffffff801f700000 System model name: MacPro6,1 (Mac-F60DEB81FF30ACF6) System uptime in nanoseconds: 73204999775828 last loaded kext at 69053606066525: com.intel.kext.intelhaxm 6.2.1 (addr 0xffffff7fa2105000, size 172032) last unloaded kext at 69273233630975: com.apple.driver.AppleXsanScheme 3 (addr 0xffffff7fa20fd000, size 32768) loaded kexts: com.intel.kext.intelhaxm 6.2.1 org.virtualbox.kext.VBoxNetAdp 5.1.22 org.virtualbox.kext.VBoxNetFlt 5.1.22 org.virtualbox.kext.VBoxUSB 5.1.22 org.virtualbox.kext.VBoxDrv 5.1.22 com.insanelymac.driver.AppleIntelE1000e 2.4.14 org.hwsensors.driver.GPUSensors 1394 net.osx86.kexts.GenericUSBXHCI 1.2.11 as.lvs1974.NvidiaGraphicsFixup 1.1.2 as.vit9696.Lilu 1.1.4 org.netkas.driver.FakeSMC 1758 com.rehabman.driver.USBInjectAll 0.5.17 com.apple.filesystems.afpfs 11.0.5 com.apple.nke.asp-tcp 8.0.1 com.apple.filesystems.autofs 3.0 com.apple.driver.AGPM 110.23.17 com.apple.driver.ApplePlatformEnabler 2.7.0d0 com.apple.driver.X86PlatformShim 1.0.0 com.apple.driver.pmtelemetry 1 com.apple.iokit.IOUserEthernet 1.0.1 com.apple.driver.AppleUpstreamUserClient 3.6.4 com.apple.driver.AppleMCCSControl 1.3.1 com.apple.iokit.IOBluetoothSerialManager 5.0.4f18 com.apple.GeForce 10.1.7 com.apple.Dont_Steal_Mac_OS_X 7.0.0 com.apple.driver.AppleOSXWatchdog 1 com.apple.driver.AppleHV 1 com.apple.driver.AppleLPC 3.1 com.apple.driver.AppleIntelSlowAdaptiveClocking 4.0.0 com.apple.driver.AppleIntelMCEReporter 107 com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1 com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0 com.apple.BootCache 40 com.apple.driver.AppleUSBLegacyHub 900.4.1 com.apple.filesystems.hfs.kext 366.50.19 com.apple.iokit.IOAHCIBlockStorage 295.20.1 com.apple.driver.AppleAHCIPort 326.60.1 com.apple.driver.AppleACPIButtons 5.0 com.apple.driver.AppleHPET 1.8 com.apple.driver.AppleRTC 2.0 com.apple.driver.AppleSMBIOS 2.1 com.apple.driver.AppleAPIC 1.7 com.apple.driver.AppleIntelCPUPowerManagementClient 219.0.0 com.apple.nke.applicationfirewall 172 com.apple.security.quarantine 3 com.apple.security.TMSafetyNet 8 com.apple.driver.AppleIntelCPUPowerManagement 219.0.0 com.apple.driver.AppleIntelCPUPowerManagementInfo 1 com.apple.security.SecureRemotePassword 1.0 com.apple.iokit.IOUSBUserClient 900.4.1 com.apple.kext.triggers 1.0 com.apple.iokit.IOSurface 159.7 com.apple.driver.AppleSMBusController 1.0.18d1 com.apple.iokit.IOSMBusFamily 1.1 com.apple.iokit.IOBluetoothFamily 5.0.4f18 com.apple.iokit.IOAcceleratorFamily2 311.13 com.apple.nvidia.driver.NVDAGK100Hal 10.1.7 com.apple.nvidia.driver.NVDAResman 10.1.7 com.apple.AppleGraphicsDeviceControl 3.14.47 com.apple.driver.AppleSSE 1.0 com.apple.iokit.IONDRVSupport 516.1 com.apple.iokit.IOUSBHIDDriver 900.4.1 com.apple.iokit.IOGraphicsFamily 515.3 com.apple.driver.Apple16X50Serial 3.2 com.apple.iokit.IOSerialFamily 11 com.apple.iokit.IOSlowAdaptiveClockingFamily 1.0.0 com.apple.driver.X86PlatformPlugin 9.9.9 com.apple.driver.AppleSMC 3.1.9 com.apple.driver.IOPlatformPluginFamily 6.0.0d8 com.apple.iokit.IOSCSIArchitectureModelFamily 394.50.1 com.apple.driver.usb.IOUSBHostHIDDevice 1.1 com.apple.driver.usb.networking 5.0.0 com.apple.driver.usb.AppleUSBHostCompositeDevice 1.1 com.apple.driver.AppleLegacyUSBAudio 2.9.5f19 com.apple.iokit.IOAudioFamily 205.15 com.apple.vecLib.kext 1.2.0 com.apple.driver.AppleUSBComposite 900.4.1 com.apple.driver.usb.AppleUSBHub 1.1 com.apple.driver.AppleUSBMergeNub 900.4.1 com.apple.driver.AppleUSBHostMergeProperties 1.1 com.apple.filesystems.hfs.encodings.kext 1 com.apple.driver.usb.AppleUSBHostPacketFilter 1.0 com.apple.iokit.IONetworkingFamily 3.2 com.apple.iokit.IOUSBFamily 900.4.1 com.apple.driver.usb.AppleUSBEHCIPCI 1.1 com.apple.driver.usb.AppleUSBEHCI 1.1 com.apple.iokit.IOAHCIFamily 288 com.apple.driver.AppleEFINVRAM 2.1 com.apple.driver.AppleEFIRuntime 2.1 com.apple.iokit.IOHIDFamily 2.0.0 com.apple.security.sandbox 300.0 com.apple.kext.AppleMatch 1.0.0d1 com.apple.driver.AppleKeyStore 2 com.apple.driver.AppleMobileFileIntegrity 1.0.5 com.apple.driver.AppleCredentialManager 1.0 com.apple.driver.KernelRelayHost 1 com.apple.iokit.IOUSBHostFamily 1.1 com.apple.driver.AppleBusPowerController 1.0 com.apple.driver.DiskImages 444.50.16 com.apple.iokit.IOStorageFamily 2.1 com.apple.iokit.IOReportFamily 31 com.apple.driver.AppleFDEKeyStore 28.30 com.apple.driver.AppleACPIPlatform 5.0 com.apple.iokit.IOPCIFamily 2.9 com.apple.iokit.IOACPIFamily 1.4 com.apple.kec.Libm 1 com.apple.kec.pthread 1 com.apple.kec.corecrypto 1.0 Network Service: Ethernet, Ethernet, en0 USB Device: USB 2.0 Bus USB Device: Hub USB Device: Basic Optical Mouse USB Device: HP Basic USB Keyboard Thunderbolt Bus: Link to comment Share on other sites More sharing options...
Recommended Posts