Sgroove Posted March 7, 2020 Share Posted March 7, 2020 Hello, I'm hoping to get some help with regards to an issue I have with my Hackintosh.For some reason, my Hackintosh shows each output device twice and I cannot figure out why this is happening.I have attached a screenshot that shows all my audio outputs.Inside my Kexts/Other folder I have the following files:AppleALC.kextFakeSMC.kextLilu.kextUSBInjectAll.kextVoodooHDA.kextWhatevergreen.kextAlso, the built-in speakers on my two LG monitors which should work if I select HDMI-out do not work but it's not a big deal for me since I have external speakers. It would be great to fix my audio config though.Thanks for your help! Much appreciated. Link to comment Share on other sites More sharing options...
moozuki Posted March 7, 2020 Share Posted March 7, 2020 Don't use both AppleALC and voodoo, choose one or the other, which ever one works best for your system. Link to comment Share on other sites More sharing options...
Sgroove Posted March 7, 2020 Share Posted March 7, 2020 45 minutes ago, moozuki said: Don't use both AppleALC and voodoo, choose one or the other, which ever one works best for your system. Thanks for your reply. I removed AppleALC but the issue persists. Link to comment Share on other sites More sharing options...
Slice Posted March 9, 2020 Author Share Posted March 9, 2020 On 2/14/2020 at 12:04 PM, bin456789 said: Hi Slice. Thanks for your work. VoodooHDA might be the easiest way to get sounds in Hackintosk. But I got some troubles in my laptop. My laptop have "Beats Audio quad speakers and two subwoofers" according to HP website. I want to make all the speakers works. The inner speaker nodes are: Node 13 bottom speakers Node 15 upper speakers Node 16 subwoofers The Codec is IDT 92HD91BXX. The VoodooHDA version is 2.9.2. 1st try: Remove all NodesToPatch Sound panel shows 1 device. (It's Node 13. It works) 2nd try: Patch Node 15 Sound panel shows 2 devices. (They are Node 13 and 15. Both works) <key>NodesToPatch</key> <array> <dict> <key>Codec</key> <integer>0</integer> <key>Config</key> <string>0x92180150</string> <key>Node</key> <integer>15</integer> </dict> </array> 3rd try: Patch Node 16 Sound panel shows 2 devices. (They are Node 13 and 16. Both works) <key>NodesToPatch</key> <array> <dict> <key>Codec</key> <integer>0</integer> <key>Config</key> <string>0x92180160</string> <key>Node</key> <integer>16</integer> </dict> </array> 4th try: Patch Node 15 and 16. Sound panel shows 2 devices. (They are Node 13 and 15. Both works) But Node 16 is no show. <key>NodesToPatch</key> <array> <dict> <key>Codec</key> <integer>0</integer> <key>Config</key> <string>0x92180150</string> <key>Node</key> <integer>15</integer> </dict> <dict> <key>Codec</key> <integer>0</integer> <key>Config</key> <string>0x92180160</string> <key>Node</key> <integer>16</integer> </dict> </array> Is there any solution to make both Node 13,15,16 works? Thank You. Clover_dump.txt codec#0.svg Ubuntu.dump.txt Voodoo_NoPatch.txt Voodoo_Patch_15_16.txt Voodoo_Patch_15.txt Voodoo_Patch_16.txt I think use Subwoofer is impossible because it is out of HDA spec. You can't use node 16 as both outputs 19 and 20 are busy by nodes 13 and 15. Consider to put 15 and 16 in one association like node 15 0x92170050 node 16 0x92170054 Also looks nodes 31,32 which are digital outputs like HDMI but not set in configs. Link to comment Share on other sites More sharing options...
Judderi Posted March 20, 2020 Share Posted March 20, 2020 Hey! I ran into a problem with my Matebook X Pro running Catalina, I thought I'd update voodooHDA since i read somewhere that it was used already, but when I installed the newest voodoo, all my sound outputs disappeared. Seems like it was using AppleALC after all. Any ideas on how i can fix this? Also the preferences panel in settings doesn't work. Thanks, J Link to comment Share on other sites More sharing options...
Slice Posted March 20, 2020 Author Share Posted March 20, 2020 Very simple. Look for AppleALC and drag it into the trash. Place VoodooHDA instead. Link to comment Share on other sites More sharing options...
zzmadd Posted April 28, 2020 Share Posted April 28, 2020 (edited) Hi, I'm using VoodooHDA on a Realtek ALC662 chip. I have loads of HDMI ports, 6 in total. is there a way to remove the one that are not present in the system's graphics card? Also, the sound is not as sharp as with AppleHDA. Also, the sound is not as loud as with AppleHDA even though I upped the gain. Are there fixes? Thanks a lot. Edited April 28, 2020 by zzmadd Link to comment Share on other sites More sharing options...
Slice Posted April 29, 2020 Author Share Posted April 29, 2020 See boost in the VoodooHDA.info.plist 1 Link to comment Share on other sites More sharing options...
NEOSoftWare Posted May 10, 2020 Share Posted May 10, 2020 (edited) I have a sound chic with 5.1 sound on my motherboard, but there is only one green output on the back panel, how can I configure voodoohda so that the system sees only 2 sound channels? Edited May 10, 2020 by NEOSoftWare Link to comment Share on other sites More sharing options...
Slice Posted May 11, 2020 Author Share Posted May 11, 2020 Place LineOut nodes into different groups if you want. Be ready to return back. Link to comment Share on other sites More sharing options...
NEOSoftWare Posted May 11, 2020 Share Posted May 11, 2020 (edited) 14 hours ago, Slice said: Place LineOut nodes into different groups if you want. Do I need to channel 21 and 22 from group 3? Can you tell me how to do this? dump.txt Edited May 11, 2020 by NEOSoftWare Link to comment Share on other sites More sharing options...
zzmadd Posted June 26, 2020 Share Posted June 26, 2020 I'm using VoodooHDA 2.9.2 on a Realtek ALC662 chip. I have loads of HDMI ports, 6 in total. is there a way to remove the one not needed? I also have a SPDIF output but the system doesn't have one. Can it be removed? Also, I have 2 analog inputs and 1 output. The 1 output is the green plug in the back of the motherboard panel. This works ok. Both the front HDAudio and rear blue plug are missing from the menu. Can they be added? If I listen to audio selecting the green rear port the front HDAudio plug sounds really bad with intermittent sound. Can't be used. Thanks for your help. Link to comment Share on other sites More sharing options...
mboy Posted July 2, 2020 Share Posted July 2, 2020 I have been running Catalina on dell inspiron 3670 with Radeon RX560. Sound ports all present including analog from motherboard panel (realtek alc3820 chipset) and HDMI. I have BigSur now running using OpenCore on the same machine (system cloned from VMware installation). VoodooHDA only shows the HDMI digital outputs. I attach snapshots of both systems from Hackintool and IORegistry explorer. Any advice on how to restore analog ports would be appreciated. Thanks. Spoiler Spoiler Spoiler Spoiler Spoiler Link to comment Share on other sites More sharing options...
Evgeny R. Posted July 10, 2020 Share Posted July 10, 2020 (edited) I have Intel NUC10i7FNK. It has Realtek ALC256 After sleep no sound anymore on Digital Audio (HDMI). I couldn't find any solution OS: Catalina 10.15.5 How can it be solved? Thanks, Evgeny Edited July 10, 2020 by Evgeny R. Link to comment Share on other sites More sharing options...
Slice Posted July 14, 2020 Author Share Posted July 14, 2020 On 6/27/2020 at 12:16 AM, zzmadd said: I'm using VoodooHDA 2.9.2 on a Realtek ALC662 chip. I have loads of HDMI ports, 6 in total. is there a way to remove the one not needed? I also have a SPDIF output but the system doesn't have one. Can it be removed? Also, I have 2 analog inputs and 1 output. The 1 output is the green plug in the back of the motherboard panel. This works ok. Both the front HDAudio and rear blue plug are missing from the menu. Can they be added? If I listen to audio selecting the green rear port the front HDAudio plug sounds really bad with intermittent sound. Can't be used. Thanks for your help. Look sound dump (getdump utility) to decide what nodes can be disabled. On 7/11/2020 at 12:12 AM, Evgeny R. said: I have Intel NUC10i7FNK. It has Realtek ALC256 After sleep no sound anymore on Digital Audio (HDMI). I couldn't find any solution OS: Catalina 10.15.5 How can it be solved? Thanks, Evgeny I think HDMI ports are not from Realtek chip? On 7/2/2020 at 5:27 PM, mboy said: I have been running Catalina on dell inspiron 3670 with Radeon RX560. Sound ports all present including analog from motherboard panel (realtek alc3820 chipset) and HDMI. I have BigSur now running using OpenCore on the same machine (system cloned from VMware installation). VoodooHDA only shows the HDMI digital outputs. I attach snapshots of both systems from Hackintool and IORegistry explorer. Any advice on how to restore analog ports would be appreciated. Thanks. Reveal hidden contents Reveal hidden contents Reveal hidden contents Reveal hidden contents Reveal hidden contents Big Sur is beta system. Link to comment Share on other sites More sharing options...
Evgeny R. Posted July 14, 2020 Share Posted July 14, 2020 (edited) 2 hours ago, Slice said: Look sound dump (getdump utility) to decide what nodes can be disabled. I think HDMI ports are not from Realtek chip? Big Sur is beta system. Edited July 14, 2020 by Evgeny R. Link to comment Share on other sites More sharing options...
Evgeny R. Posted July 14, 2020 Share Posted July 14, 2020 On 7/11/2020 at 12:12 AM, Evgeny R. said: I have Intel NUC10i7FNK. It has Realtek ALC256 After sleep no sound anymore on Digital Audio (HDMI). I couldn't find any solution OS: Catalina 10.15.5 How can it be solved? Thanks, Evgeny Correct, HDMI sound is from my LG HDR 4K monitor Link to comment Share on other sites More sharing options...
joevt Posted July 15, 2020 Share Posted July 15, 2020 (edited) 22 hours ago, Evgeny R. said: Correct, HDMI sound is from my LG HDR 4K monitor HDMI audio comes from HDA of GPU. In the case of Intel graphics which doesn't have its own HDA, as in the NUC, there's only the main HDA device - the Realtek? Or is 10th gen CPU different? Edited July 15, 2020 by joevt Link to comment Share on other sites More sharing options...
Evgeny R. Posted July 15, 2020 Share Posted July 15, 2020 I can't answer the question, what i know is that NUC10i7FNK has Intel UHD Graphics 630 Link to comment Share on other sites More sharing options...
Slice Posted July 15, 2020 Author Share Posted July 15, 2020 14 hours ago, joevt said: HDMI audio comes from HDA of GPU. In the case of Intel graphics which doesn't have its own HDA, as in the NUC, there's only the main HDA device - the Realtek? Or is 10th gen CPU different? He said nothing about discrete graphics. 1 Link to comment Share on other sites More sharing options...
joevt Posted July 16, 2020 Share Posted July 16, 2020 11 hours ago, Slice said: He said nothing about discrete graphics. I did not say he did. The question was, where does HDMI sound option originate, you guessed it was not from the Realtek. He said it comes from LG which was nonsensical (it has the speakers to produce sound but doesn't have the chip to make audio). I guessed it must be Realtek since Intel GPU doesn't have its own HDA. I think you need an ioreg dump to find the answer? Link to comment Share on other sites More sharing options...
Slice Posted July 17, 2020 Author Share Posted July 17, 2020 Or Clover's preboot.log can show all devices. Link to comment Share on other sites More sharing options...
Evgeny R. Posted July 17, 2020 Share Posted July 17, 2020 23 hours ago, joevt said: I did not say he did. The question was, where does HDMI sound option originate, you guessed it was not from the Realtek. He said it comes from LG which was nonsensical (it has the speakers to produce sound but doesn't have the chip to make audio). I guessed it must be Realtek since Intel GPU doesn't have its own HDA. I think you need an ioreg dump to find the answer? Thanks, attached dumps from IOReg and IORegExplorer IORegDump.zip Link to comment Share on other sites More sharing options...
joevt Posted July 17, 2020 Share Posted July 17, 2020 24 minutes ago, Evgeny R. said: Thanks, attached dumps from IOReg and IORegExplorer IORegDump.zip Is this dump from when the HDMI is present or missing (before or after sleep)? Link to comment Share on other sites More sharing options...
Evgeny R. Posted July 17, 2020 Share Posted July 17, 2020 8 hours ago, joevt said: Is this dump from when the HDMI is present or missing (before or after sleep)? It was after sleep without sound. Now attached before sleep with HDMI sound IORegDump_With Sound.zip Link to comment Share on other sites More sharing options...
Recommended Posts