VoodooHDA 3.0.2

everart · April 22, 2017

Where is the file? :blush:

MaLd0n · April 22, 2017

Check the first post!

everart · April 23, 2017

Thanks! Works with Yosemite. I have only one problem. My notebook speaker is working stereo but in my headphones if I use stereo I have a very bad sounds! I need choose between left or right.

Zenith432 · April 23, 2017

Sounds like a short in your headphones. How do you "choose" between left or right? By lowering the volume on the other all way down to zero?

Thanks! Works with Yosemite. I have only one problem. My notebook speaker is working stereo but in my headphones if I use stereo I have a very bad sounds! I need choose between left or right.

everart · April 23, 2017

Exactly! Or I go to output/ "balance"

My notebook is like a phone. Is only one Jack for mic/headphones.

Slice · April 23, 2017

Thanks! Works with Yosemite. I have only one problem. My notebook speaker is working stereo but in my headphones if I use stereo I have a very bad sounds! I need choose between left or right.

Can you record the bad sound by phone an upload here for us?

Zenith432 · April 23, 2017

That's common connector for laptops. Maybe try with splitter

Exactly! Or I go to output/ "balance"
My notebook is like a phone. Is only one Jack for mic/headphones.

everart · April 23, 2017

Can you record the bad sound by phone an upload here for us?

I can´t because is with my headphones but I saw that I got HEADPHONES (BLACK LEFT) When I plug it in. It shouldn´t be like this right?

That's common connector for laptops. Maybe try with splitter

I know is not cable! I already try this.. also 4 different headphones with and without mic.

take a look!

If I can make the speaker "Mono" for me it will be amazing! because I really don´t care about Stereo in a laptop and I have a USB audio interface if I need. can I make voodooHDA MONO?

everart · April 24, 2017

I think it can be something with my pin sense. Can somebody help me with this?

trupetiago · April 28, 2017

I'm having an issue with VoodooHDA 2.9.0 in Sierra 10.12.4.

When I install Voodoo, it works fine, all the ports and volume touch controls. The only problem is that is disable all the USB ports injected by USBInjectAll.kext.

I uninstalled Voodoo, and the ports didn't came back.

I uninstalled USBInjectAll, reboot, and installed again, without voodoo, and the ports didn't come back.

The HD was formatted 3 times, installed Sierra methodically all the times, in other words. I repeated the test 3 times.

Its and Laptop HP dv4-2160us - Intel 430m i5 2.27 GHz - Arrandale, 1st gen intel graphics. 5 series/3400 series.

The audio hardware is vendor 8086 and device 3B56.

The USB host is vendor 8086 and device 3B3C.

The EHCI controller is vendor 8086 and device 3B64.

I'm having remote assistance and the person already installed 1500 hackintoshes, he never seen this issue before.

Anyone have any clue about what is happening?

Slice · April 30, 2017

Sorry but VoodooHDA has zero relation to USB.

mitch_de · May 1, 2017

Yep, pehaps something else happens (DSDT.aml with USB fixes not loaded, other non VoodooHDA related USB fix things happen)

illfatedIM · May 13, 2017

VodooHDA makes (rear) sound output (stereo) work but Microphone, Line-Out, SPDIF (Rear) wont work.

I've been trying to get the PinConfigOverrideVerbs from Windows regedit and the codec dumps from linux but this card (Emu20k2, SB0880) doesnt have any codecs on linux even though microphone works perfectly fine there and windows doesnt have a PinConfig entry in the registry for this card.

I'm at a loss... what else can I do to make at least the mic/lineout to work?

Zenith432 · May 14, 2017

Run the prefpane, select the Mic Input you want to use

- RecLev is the main volume for audio input, so set it to something usable.

- Microphone/Monitor/Line-In are secondary volumes for audio input - so set the one you're using to something useful and mute the others.

- If you have iMix, set it to 100%

- Mute other volumes on the Mic Input.

- Make sure you're using latest 2.9.0d10.

If you still have problems, upload getdump.

I have some changes that make the System Volume Control for Mics change the RecLev, but haven't committed it yet.

I'm at a loss... what else can I do to make at least the mic/lineout to work?

illfatedIM · May 15, 2017

I am on the latest 2.9.0d10 and I'm using the prefpane from this thread as the one from sourceforge wouldnt work.

This is what my Line-In (Blue Rear) looks like

I tried different volume settings for Rec, Line and bottom left volume but it made no difference.
In windows I had to select "microphone" in my driver instead of "line-in" as it is a combo port I believe?

edit: yup - It's called "FlexiJack" in windows and I have to click "microphone" instead of "line-in" to be able to use the mic on that port.

Here my getdump:

Found a device of class VoodooHDADevice: IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/RP07@1C,6/IOPP/pci1102,b@0/VoodooHDADevice


Probing codec #1...
 HDA Codec #1: Creative SB0880 X-Fi
 HDA Codec ID: 0x1102000d
       Vendor: 0x1102
       Device: 0x000d
     Revision: 0x00
     Stepping: 0x00
PCI Subvendor: 0x00431102
startNode=1 endNode=2
Found audio FG nid=1 startNode=2 endNode=25 total=23

Processing audio FG cad=1 nid=1...
Powering up...
Parsing audio FG...
GPIO: 0x00000000 NumGPIO=0 NumGPO=0 NumGPI=0 GPIWake=0 GPIUnsol=0
 nid 13 0x01014010 as  1 seq  0 Line-out      Jack  1/8     Rear    External Green   misc 0
 nid 14 0x01016011 as  1 seq  1 Line-out      Jack  1/8     Rear    External Orange  misc 0
 nid 15 0x01011012 as  1 seq  2 Line-out      Jack  1/8     Rear    External Black   misc 0
 nid 16 0x01012014 as  1 seq  4 Line-out      Jack  1/8     Rear    External Grey    misc 0
 nid 17 0x0221401f as  1 seq 15 Headphones    Jack  1/8     Front   External Green   misc 0
 nid 18 0x01452130 as  3 seq  0 SPDIF-out     Jack  Optic   Rear    External Grey    misc 0 NoPresenceDetect
 nid 19 0x01813040 as  4 seq  0 Line-in       Jack  1/8     Rear    External Blue    misc 0
 nid 20 0x02a19050 as  5 seq  0 Microphone    Jack  1/8     Front   External Pink    misc 0
 nid 21 0x41811060 as  6 seq  0 Line-in       None  1/8     Rear    External Black   misc 0
 nid 22 0x41911070 as  7 seq  0 AUX           None  1/8     Rear    External Black   misc 0
 nid 23 0x01c51180 as  8 seq  0 SPDIF-in      Jack  Optic   Rear    External Black   misc 0 NoPresenceDetect
Parsing vendor patch...
Nodes patching. Codec = 1 
NumNodes = 2
VHDevice NID= 2 Config=00000000 (audio output  ) Cap=00000000 Ctrl=00000000 -- Conns:
VHDevice NID= 3 Config=00000000 (audio output  ) Cap=00000000 Ctrl=00000000 -- Conns:
VHDevice NID= 4 Config=00000000 (audio output  ) Cap=00000000 Ctrl=00000000 -- Conns:
VHDevice NID= 5 Config=00000000 (audio output  ) Cap=00000000 Ctrl=00000000 -- Conns:
VHDevice NID= 6 Config=00000000 (vendor widget ) Cap=00000000 Ctrl=00000000 -- Conns:
VHDevice NID= 7 Config=00000000 (audio output  ) Cap=00000000 Ctrl=00000000 -- Conns:
VHDevice NID= 8 Config=00000000 (audio input   ) Cap=00000000 Ctrl=00000000 -- Conns: 0=19
VHDevice NID= 9 Config=00000000 (audio input   ) Cap=00000000 Ctrl=00000000 -- Conns: 0=20
VHDevice NID=10 Config=00000000 (audio input   ) Cap=00000000 Ctrl=00000000 -- Conns: 0=21
VHDevice NID=11 Config=00000000 (audio input   ) Cap=00000000 Ctrl=00000000 -- Conns: 0=22
VHDevice NID=12 Config=00000000 (audio input   ) Cap=00000000 Ctrl=00000000 -- Conns: 0=23
VHDevice NID=13 Config=01014010 (pin: Line-out ) Cap=00000014 Ctrl=000000c0 -- Conns: 0=2
VHDevice NID=14 Config=01016011 (pin: Line-out ) Cap=00000014 Ctrl=000000c0 -- Conns: 0=3
VHDevice NID=15 Config=01011012 (pin: Line-out ) Cap=00000014 Ctrl=000000c0 -- Conns: 0=4
VHDevice NID=16 Config=01012014 (pin: Line-out ) Cap=00000014 Ctrl=000000c0 -- Conns: 0=5
VHDevice NID=17 Config=0221401f (pin: Headphone) Cap=0000001c Ctrl=000000c0 -- Conns: 0=2
VHDevice NID=18 Config=01452130 (pin: SPDIF-out) Cap=00000010 Ctrl=000000c0 -- Conns: 0=7
VHDevice NID=19 Config=01813040 (pin: Line-in () Cap=00000024 Ctrl=000000a0 -- Conns:
VHDevice NID=20 Config=02a19050 (pin: Microphon) Cap=00000024 Ctrl=000000a0 -- Conns:
VHDevice NID=21 Config=41811060 (pin: Line-in () Cap=00000026 Ctrl=000000a0 -- Conns:
VHDevice NID=22 Config=41911070 (pin: AUX (None) Cap=00000026 Ctrl=000000a0 -- Conns:
VHDevice NID=23 Config=01c51180 (pin: SPDIF-in ) Cap=00000020 Ctrl=000000a0 -- Conns:
VHDevice NID=24 Config=00000000 (vendor widget ) Cap=00000000 Ctrl=00000000 -- Conns:
Parsing Ctls...
Disabling nonaudio...
Disabling useless...
 Disabling nid 10 connection 0 due to disabled child widget.
 Disabling nid 11 connection 0 due to disabled child widget.
Patched pins configuration:
 nid 13 0x01014010 as  1 seq  0 Line-out      Jack  1/8     Rear    External Green   misc 0
 nid 14 0x01016011 as  1 seq  1 Line-out      Jack  1/8     Rear    External Orange  misc 0
 nid 15 0x01011012 as  1 seq  2 Line-out      Jack  1/8     Rear    External Black   misc 0
 nid 16 0x01012014 as  1 seq  4 Line-out      Jack  1/8     Rear    External Grey    misc 0
 nid 17 0x0221401f as  1 seq 15 Headphones    Jack  1/8     Front   External Green   misc 0
 nid 18 0x01452130 as  3 seq  0 SPDIF-out     Jack  Optic   Rear    External Grey    misc 0 NoPresenceDetect
 nid 19 0x01813040 as  4 seq  0 Line-in       Jack  1/8     Rear    External Blue    misc 0
 nid 20 0x02a19050 as  5 seq  0 Microphone    Jack  1/8     Front   External Pink    misc 0
 nid 21 0x41811060 as  6 seq  0 Line-in       None  1/8     Rear    External Black   misc 0 [DISABLED]
 nid 22 0x41911070 as  7 seq  0 AUX           None  1/8     Rear    External Black   misc 0 [DISABLED]
 nid 23 0x01c51180 as  8 seq  0 SPDIF-in      Jack  Optic   Rear    External Black   misc 0 NoPresenceDetect
Parsing pin associations...
5 associations found:
Association 0 (1) out:
 Pin nid=13 seq=0
 Pin nid=14 seq=1
 Pin nid=15 seq=2
 Pin nid=16 seq=4
 Pin nid=17 seq=15
   Redir type=0 jack=15 def=0
Association 1 (3) out:
 Pin nid=18 seq=0
   Redir type=-1 jack=-1 def=0
Association 2 (4) in:
 Pin nid=19 seq=0
   Redir type=-1 jack=0 def=0
Association 3 (5) in:
 Pin nid=20 seq=0
   Redir type=-1 jack=0 def=0
Association 4 (8) in:
 Pin nid=23 seq=0
   Redir type=-1 jack=-1 def=0
Building AFG tree...
Tracing association 0 (1)
 Tracing pin 13 with min nid 0
   nid 2 returned 2
  nid 13 returned 2
 Pin 13 traced to DAC 2
 Tracing pin 14 with min nid 0
   nid 3 returned 3
  nid 14 returned 3
 Pin 14 traced to DAC 3
 Tracing pin 15 with min nid 0
   nid 4 returned 4
  nid 15 returned 4
 Pin 15 traced to DAC 4
 Tracing pin 16 with min nid 0
   nid 5 returned 5
  nid 16 returned 5
 Pin 16 traced to DAC 5
 Tracing pin 17 with min nid 0 and hpredir 0
   nid 2 returned 2
  nid 17 returned 2
 Pin 17 traced to DAC 2 and hpredir 0
Association 0 (1) trace succeeded
Tracing association 1 (3)
 Tracing pin 18 with min nid 0
   nid 7 returned 7
  nid 18 returned 7
 Pin 18 traced to DAC 7
Association 1 (3) trace succeeded
Tracing association 2 (4)
 Tracing pin 19 to ADC 8
  tracing via nid 19
   tracing via nid 8
   nid 8 returned 1
  nid 19 returned 1
 Pin 19 traced to ADC 8
Association 2 (4) trace succeeded
Tracing association 3 (5)
 Tracing pin 20 to ADC 9
  tracing via nid 20
   tracing via nid 9
   nid 9 returned 1
  nid 20 returned 1
 Pin 20 traced to ADC 9
Association 3 (5) trace succeeded
Tracing association 4 (8)
 Tracing pin 23 to ADC 10
  tracing via nid 23
   tracing via nid 12
   nid 12 returned 0
  nid 23 returned 0
 Unable to trace pin 23 to ADC 10, undo traces
 Tracing pin 23 to ADC 11
  tracing via nid 23
   tracing via nid 12
   nid 12 returned 0
  nid 23 returned 0
 Unable to trace pin 23 to ADC 11, undo traces
 Tracing pin 23 to ADC 12
  tracing via nid 23
   tracing via nid 12
   nid 12 returned 1
  nid 23 returned 1
 Pin 23 traced to ADC 12
Association 4 (8) trace succeeded
Tracing input monitor
Tracing other input monitors
 Tracing nid complex 19 to out
  tracing via nid 19
   tracing via nid 8
   nid 8 busy by input association 2
  nid 19 returned 0
 Tracing nid complex 20 to out
  tracing via nid 20
   tracing via nid 9
   nid 9 busy by input association 3
  nid 20 returned 0
 Tracing nid complex 23 to out
  tracing via nid 23
   tracing via nid 12
   nid 12 busy by input association 4
  nid 23 returned 0
Tracing beeper
Disabling unassociated widgets...
Disabling nonselected inputs...
Disabling useless...
 Disabling control 5 nid 6 cnid -1 due to disabled widget.
 Disabling control 9 nid 10 cnid -1 due to disabled widget.
 Disabling control 10 nid 11 cnid -1 due to disabled widget.
Disabling crossassociated connections...
Disabling useless...
Binding associations to channels...
Assigning names to signal sources...
Assigning mixers to the tree...
Preparing pin controls...
AFG commit...
Creating PCM devices...
pcmAttach: HDA Creative SB0880 X-Fi PCM #0 Analog at cad 1 nid 1
+--------------------------------------+
| DUMPING PCM Playback/Record Channels |
+--------------------------------------+

Playback:

     Stream cap: 0x00000001
                 PCM
        PCM cap: 0x000a0160
                 16 24 bits, 44 48 96 KHz
            DAC: 2 3 4 5

Record:

     Stream cap: 0x00000001
                 PCM
        PCM cap: 0x000a0160
                 16 24 bits, 44 48 96 KHz
            ADC: 8

+-------------------------------+
| DUMPING Playback/Record Paths |
+-------------------------------+

Playback:

    nid=13 [pin: Line-out (Green Rear)]
      |
      + <- nid=2 [audio output] [src: pcm] bindSeq=00008001


    nid=14 [pin: Line-out (Orange Rear)]
      |
      + <- nid=3 [audio output] [src: pcm] bindSeq=00000002


    nid=15 [pin: Line-out (Black Rear)]
      |
      + <- nid=4 [audio output] [src: pcm] bindSeq=00000004


    nid=16 [pin: Line-out (Grey Rear)]
      |
      + <- nid=5 [audio output] [src: pcm] bindSeq=00000010


    nid=17 [pin: Headphones (Green Front)]
      |
      + <- nid=2 [audio output] [src: pcm] bindSeq=00008001


Record:

    nid=8 [audio input]
      |
      + <- nid=19 [pin: Line-in (Blue Rear)] [src: line] bindSeq=00000001


+-------------------------+
| DUMPING Volume Controls |
+-------------------------+

Master Volume (OSS: vol)
   |
   +- control  1 (nid   2 out):    dir - out oss: vol, pcm -51/+0dB (104 steps) + mute
   +- control  2 (nid   3 out):    dir - out oss: vol, pcm -51/+0dB (104 steps) + mute
   +- control  3 (nid   4 out):    dir - out oss: vol, pcm -51/+0dB (104 steps) + mute
   +- control  4 (nid   5 out):    dir - out oss: vol, pcm -51/+0dB (104 steps) + mute

PCM Volume (OSS: pcm)
   |
   +- control  1 (nid   2 out):    dir - out oss: vol, pcm -51/+0dB (104 steps) + mute
   +- control  2 (nid   3 out):    dir - out oss: vol, pcm -51/+0dB (104 steps) + mute
   +- control  3 (nid   4 out):    dir - out oss: vol, pcm -51/+0dB (104 steps) + mute
   +- control  4 (nid   5 out):    dir - out oss: vol, pcm -51/+0dB (104 steps) + mute

Line-in Volume (OSS: line)
   |
   +- control  7 (nid   8 in   0): dir - in oss: line, rec -51/+6dB (116 steps) + mute

Recording Level (OSS: rec)
   |
   +- control  7 (nid   8 in   0): dir - in oss: line, rec -51/+6dB (116 steps) + mute

OSS mixer initialization...
Registering PCM channels...
pcmAttach: HDA Creative SB0880 X-Fi PCM #1 Digital at cad 1 nid 1
+--------------------------------------+
| DUMPING PCM Playback/Record Channels |
+--------------------------------------+

Playback:

     Stream cap: 0x00000005
                 AC3 PCM
        PCM cap: 0x000a0160
                 16 24 bits, 44 48 96 KHz
            DAC: 7

Record:

     Stream cap: 0x00000005
                 AC3 PCM
        PCM cap: 0x000a0160
                 16 24 bits, 44 48 96 KHz
            ADC: 12

+-------------------------------+
| DUMPING Playback/Record Paths |
+-------------------------------+

Playback:

    nid=18 [pin: SPDIF-out (Grey Rear)]
      |
      + <- nid=7 [audio output] [src: pcm] bindSeq=00000001


Record:

    nid=12 [audio input]
      |
      + <- nid=23 [pin: SPDIF-in (Black Rear)] [src: dig1] bindSeq=00000001


+-------------------------+
| DUMPING Volume Controls |
+-------------------------+

Master Volume (OSS: vol)
   |
   +- control  6 (nid   7 out):    dir - out oss: vol, pcm -51/+0dB (104 steps) + mute

PCM Volume (OSS: pcm)
   |
   +- control  6 (nid   7 out):    dir - out oss: vol, pcm -51/+0dB (104 steps) + mute

Recording Level (OSS: rec)
   |
   +- control 11 (nid  12 in   0): dir - in oss: rec, dig1 -51/+6dB (116 steps) + mute

Unknown Ctl (OSS: dig1)
   |
   +- control 11 (nid  12 in   0): dir - in oss: rec, dig1 -51/+6dB (116 steps) + mute

OSS mixer initialization...
Registering PCM channels...
pcmAttach: HDA Creative SB0880 X-Fi PCM #2 Analog at cad 1 nid 1
+--------------------------------------+
| DUMPING PCM Playback/Record Channels |
+--------------------------------------+

Record:

     Stream cap: 0x00000001
                 PCM
        PCM cap: 0x000a0160
                 16 24 bits, 44 48 96 KHz
            ADC: 9

+-------------------------------+
| DUMPING Playback/Record Paths |
+-------------------------------+

Record:

    nid=9 [audio input]
      |
      + <- nid=20 [pin: Microphone (Pink Front)] [src: mic] bindSeq=00000001


+-------------------------+
| DUMPING Volume Controls |
+-------------------------+

Microphone Volume (OSS: mic)
   |
   +- control  8 (nid   9 in   0): dir - in oss: mic, rec -51/+12dB (128 steps) + mute

Recording Level (OSS: rec)
   |
   +- control  8 (nid   9 in   0): dir - in oss: mic, rec -51/+12dB (128 steps) + mute

OSS mixer initialization...
Registering PCM channels...
FG config/quirks: forcestereo ivref50 ivref80 ivref100 ivref
HP switch init...

+-------------------+
| DUMPING HDA NODES |
+-------------------+

Default Parameter
-----------------
     Stream cap: 0x00000001
                 PCM
        PCM cap: 0x000a0160
                 16 24 bits, 44 48 96 KHz
         IN amp: 0x80017367
        OUT amp: 0x80016767

            nid: 2
           Name: audio output
     Widget cap: 0x00000005
                 OUT_AMP STEREO
    Association: 0 (0x00008001)
            OSS: pcm (pcm)
     Stream cap: 0x00000001
                 PCM
        PCM cap: 0x000a0160
                 16 24 bits, 44 48 96 KHz
     Output amp: 0x80016767
                 mute=1 step=103 size=1 offset=103
     Output val: [0x4A 0x4A]

            nid: 3
           Name: audio output
     Widget cap: 0x00000005
                 OUT_AMP STEREO
    Association: 0 (0x00000002)
            OSS: pcm (pcm)
     Stream cap: 0x00000001
                 PCM
        PCM cap: 0x000a0160
                 16 24 bits, 44 48 96 KHz
     Output amp: 0x80016767
                 mute=1 step=103 size=1 offset=103
     Output val: [0x4A 0x4A]

            nid: 4
           Name: audio output
     Widget cap: 0x00000005
                 OUT_AMP STEREO
    Association: 0 (0x00000004)
            OSS: pcm (pcm)
     Stream cap: 0x00000001
                 PCM
        PCM cap: 0x000a0160
                 16 24 bits, 44 48 96 KHz
     Output amp: 0x80016767
                 mute=1 step=103 size=1 offset=103
     Output val: [0x4A 0x4A]

            nid: 5
           Name: audio output
     Widget cap: 0x00000005
                 OUT_AMP STEREO
    Association: 0 (0x00000010)
            OSS: pcm (pcm)
     Stream cap: 0x00000001
                 PCM
        PCM cap: 0x000a0160
                 16 24 bits, 44 48 96 KHz
     Output amp: 0x80016767
                 mute=1 step=103 size=1 offset=103
     Output val: [0x4A 0x4A]

            nid: 6 [DISABLED]
           Name: vendor widget
     Widget cap: 0x00f0001d
                 FORMAT_OVR AMP_OVR OUT_AMP STEREO
     Output amp: 0x80017f67
                 mute=1 step=127 size=1 offset=103
     Output val: [0x80 0x80]

            nid: 7
           Name: audio output
     Widget cap: 0x00000205
                 DIGITAL OUT_AMP STEREO
    Association: 1 (0x00000001)
            OSS: pcm (pcm)
     Stream cap: 0x00000001
                 PCM
        PCM cap: 0x000a0160
                 16 24 bits, 44 48 96 KHz
     Output amp: 0x80016767
                 mute=1 step=103 size=1 offset=103
     Output val: [0x4A 0x4A]

            nid: 8
           Name: audio input
     Widget cap: 0x00100103
                 IN_AMP STEREO
    Association: 2 (0x00000001)
     Stream cap: 0x00000001
                 PCM
        PCM cap: 0x000a0160
                 16 24 bits, 44 48 96 KHz
      Input amp: 0x80017367
                 mute=1 step=115 size=1 offset=103
      Input val: [0x4D 0x4D] 
    connections: 1 enabled 1
          |
          + <- nid=19 [pin: Line-in (Blue Rear)]

            nid: 9
           Name: audio input
     Widget cap: 0x0010010b
                 AMP_OVR IN_AMP STEREO
    Association: 3 (0x00000001)
     Stream cap: 0x00000001
                 PCM
        PCM cap: 0x000a0160
                 16 24 bits, 44 48 96 KHz
      Input amp: 0x80017f67
                 mute=1 step=127 size=1 offset=103
      Input val: [0x39 0x39] 
    connections: 1 enabled 1
          |
          + <- nid=20 [pin: Microphone (Pink Front)]

            nid: 10 [DISABLED]
           Name: audio input
     Widget cap: 0x0010011b
                 FORMAT_OVR AMP_OVR IN_AMP STEREO
     Stream cap: 0x00000001
                 PCM
        PCM cap: 0x000a0560
                 16 24 bits, 44 48 96 192 KHz
      Input amp: 0x80017f67
                 mute=1 step=127 size=1 offset=103
      Input val: [0x80 0x80] 
    connections: 1 enabled 0
          |
          + [DISABLED] <- nid=21 [pin: Line-in (None)] [DISABLED]

            nid: 11 [DISABLED]
           Name: audio input
     Widget cap: 0x0010011b
                 FORMAT_OVR AMP_OVR IN_AMP STEREO
     Stream cap: 0x00000001
                 PCM
        PCM cap: 0x000a0560
                 16 24 bits, 44 48 96 192 KHz
      Input amp: 0x80017f67
                 mute=1 step=127 size=1 offset=103
      Input val: [0x80 0x80] 
    connections: 1 enabled 0
          |
          + [DISABLED] <- nid=22 [pin: AUX (None)] [DISABLED]

            nid: 12
           Name: audio input
     Widget cap: 0x00100303
                 DIGITAL IN_AMP STEREO
    Association: 4 (0x00000001)
     Stream cap: 0x00000001
                 PCM
        PCM cap: 0x000a0160
                 16 24 bits, 44 48 96 KHz
      Input amp: 0x80017367
                 mute=1 step=115 size=1 offset=103
      Input val: [0x0A 0x0A] 
    connections: 1 enabled 1
          |
          + <- nid=23 [pin: SPDIF-in (Black Rear)]

            nid: 13
           Name: pin: Line-out (Green Rear)
     Widget cap: 0x00400189
                 UNSOL AMP_OVR STEREO
    Association: 0 (0x00000001)
        Pin cap: 0x00000014
                 PDC OUT
     Pin config: 0x01014010
    Pin control: 0x00000040 OUT
    connections: 1 enabled 1
          |
          + <- nid=2 [audio output]

            nid: 14
           Name: pin: Line-out (Orange Rear)
     Widget cap: 0x00400189
                 UNSOL AMP_OVR STEREO
    Association: 0 (0x00000002)
        Pin cap: 0x00000014
                 PDC OUT
     Pin config: 0x01016011
    Pin control: 0x00000040 OUT
    connections: 1 enabled 1
          |
          + <- nid=3 [audio output]

            nid: 15
           Name: pin: Line-out (Black Rear)
     Widget cap: 0x00400189
                 UNSOL AMP_OVR STEREO
    Association: 0 (0x00000004)
        Pin cap: 0x00000014
                 PDC OUT
     Pin config: 0x01011012
    Pin control: 0x00000040 OUT
    connections: 1 enabled 1
          |
          + <- nid=4 [audio output]

            nid: 16
           Name: pin: Line-out (Grey Rear)
     Widget cap: 0x00400189
                 UNSOL AMP_OVR STEREO
    Association: 0 (0x00000010)
        Pin cap: 0x00000014
                 PDC OUT
     Pin config: 0x01012014
    Pin control: 0x00000040 OUT
    connections: 1 enabled 1
          |
          + <- nid=5 [audio output]

            nid: 17
           Name: pin: Headphones (Green Front)
     Widget cap: 0x00400189
                 UNSOL AMP_OVR STEREO
    Association: 0 (0x00008000)
        Pin cap: 0x0000001c
                 PDC HP OUT
     Pin config: 0x0221401f
    Pin control: 0x000000c0 HP OUT
    connections: 1 enabled 1
          |
          + <- nid=2 [audio output]

            nid: 18
           Name: pin: SPDIF-out (Grey Rear)
     Widget cap: 0x00400389
                 DIGITAL UNSOL AMP_OVR STEREO
    Association: 1 (0x00000001)
        Pin cap: 0x00000010
                 OUT
     Pin config: 0x01452130
    Pin control: 0x00000040 OUT
    connections: 1 enabled 1
          |
          + <- nid=7 [audio output]

            nid: 19
           Name: pin: Line-in (Blue Rear)
     Widget cap: 0x00400089
                 UNSOL AMP_OVR STEREO
    Association: 2 (0x00000001)
            OSS: line (line)
        Pin cap: 0x00000024
                 PDC IN
     Pin config: 0x01813040
    Pin control: 0x00000020 IN

            nid: 20
           Name: pin: Microphone (Pink Front)
     Widget cap: 0x00400089
                 UNSOL AMP_OVR STEREO
    Association: 3 (0x00000001)
            OSS: mic (mic)
        Pin cap: 0x00000024
                 PDC IN
     Pin config: 0x02a19050
    Pin control: 0x00000020 IN

            nid: 21 [DISABLED]
           Name: pin: Line-in (None)
     Widget cap: 0x0040008b
                 UNSOL AMP_OVR IN_AMP STEREO
        Pin cap: 0x00000026
                 TRQD PDC IN
     Pin config: 0x41811060
    Pin control: 0x00000000

            nid: 22 [DISABLED]
           Name: pin: AUX (None)
     Widget cap: 0x0040008b
                 UNSOL AMP_OVR IN_AMP STEREO
        Pin cap: 0x00000026
                 TRQD PDC IN
     Pin config: 0x41911070
    Pin control: 0x00000000

            nid: 23
           Name: pin: SPDIF-in (Black Rear)
     Widget cap: 0x00400289
                 DIGITAL UNSOL AMP_OVR STEREO
    Association: 4 (0x00000001)
            OSS: dig1 (dig1)
        Pin cap: 0x00000020
                 IN
     Pin config: 0x01c51180
    Pin control: 0x00000020 IN

            nid: 24 [DISABLED]
           Name: vendor widget
     Widget cap: 0x00f00080

p.p1 {margin: 0.0px 0.0px 0.0px 0.0px; font: 14.0px Menlo; color: #000000; background-color: #ffffff}
p.p2 {margin: 0.0px 0.0px 0.0px 0.0px; font: 14.0px Menlo; color: #000000; background-color: #ffffff; min-height: 16.0px}
span.s1 {font-variant-ligatures: no-common-ligatures}
span.Apple-tab-span {white-space:pre}
                 UNSOL

And how the IO of the card looks like:

getdump.txt

johnzaro · May 25, 2017

I installed voodooHDA 2.8.8.pkg today and then installed voodooHDA 2.9.0d10 kext with kext beast to S/L/E.

I have 2.1 stereo speakers connected to the green rear jack of my gigabyte Z270N-WiFi mb which work correctly and also connected my headphones to the front green jack which also works.

However I am trying to get the microphone (front pink jack) to work but it only produces a very loud static noise. I tried all possible combinations in preference pane (it lets me adjust speaker, iMix, Recording Level and monitor) but nothing can eliminate the static.

Is there anything I can do to fix the microphone?

getDump.txt

Sbrillo · June 2, 2017

tried with 2.9.0 version and new prefpane. Sound works but I can't install prefpane

chris1111 · June 2, 2017

tried with 2.9.0 version and new prefpane. Sound works but I can't install prefpane

Prefpane need to be on Library /PreferencePanes

for Sierra

also if the VoodooHDA kext is inject by Clover

SystemParameters

<key>InjectKexts</key>

Sbrillo · June 2, 2017

Prefpane need to be on Library /PreferencePanes

for Sierra

also if the VoodooHDA kext is inject by Clover

SystemParameters

<key>InjectKexts</key>

<string>Yes</string>

solved, remove the old VoodooHDA.prefPane from Library/PreferencePanes and install the new by clicking on it.

Works but I have only two option to adjust: PCM and iMix. I cannot adjust bass or speaker value.

Audio chip is IDT92HD99BXX.

gills83 · June 2, 2017

hello,

In the end, voodooHDA works perfectly on AMD Ryzen platforms, no audio stall in UHD 4K media playback, audio quality is of average quality compared to a DAC but works perfectly.

Thanks Slice

412509Capturede769cran20170602a768233237

447150Capturede769cran20170602a768233720

edit:

file audio 24 bit 88 Khz

http://petoindominique.fr/gratuit/Julsang.zip

Premium Clickins · June 14, 2017

Hello,

I am using VoodooHDA 2.9.0d10. It is injecting from Clover 4077. I can't seem to adjust the volume of each speaker. Just front left and right or 1 and 2.

The speaker config is set to 5.1 and when I click on each speaker and the sub, they work fine.

Any Ideas?

Thanks

P303 · June 16, 2017

Greetings Slice,

I’m excited! This is the closet I’ve been to fully functional onboard Realtek ALC1150 audio. The front headphone port works great without noise, however when I try the analog “5.1CH (Green+Orange+Black Rear) and SPDIF optical digital-out port, I only get Left/ Right/ Sub. My center/ surround speakers are not working. I've tested my 5.1 receiver with other audio sources and it is functioning properly. I used Kext beast to install your “VoodooHDA.kext-2.9.0d10” file to S/ L/ E and I manually moved the “prePane-289” to L/ PreferencePanes. Your help would be greatly appreciated. Thanks.

Analog 5.1CH/ SPDIF Optical digital-out

1. Left

2. Right

3. Sub

No center or Surrounds channels 4-6 have no audio.

I added the following to Clover Config Text Mode.

<key>NodesToPatch</key>

<array>

<dict>

<key>Codec</key>

<key>Config</key>

</dict>

<dict>

<key>Codec</key>

<key>Config</key>

</dict>

<dict>

<key>Codec</key>

<key>Config</key>

</dict>

</array>

Gigabyte GA-X99P-SLI (BIOS f23) - Intel Core i7-5820K 6-Cores - GIGABYTE GeForce GTX 970 - Vengeance LPX DDR4 DRAM 2400MHz - Sierra 10.12.5

Slice · June 16, 2017

1. Why did you add NodesToPatch to Clover config? These must be in VoodooHDA/Contents/Info.plist

2. What is config 0x100001? This is wrong node config.

Make getdump to see what nodes present and what needed to patch.

P303 · June 18, 2017

1. Why did you add NodesToPatch to Clover config? These must be in VoodooHDA/Contents/Info.plist

2. What is config 0x100001? This is wrong node config.

Make getdump to see what nodes present and what needed to patch.

Oops! My mistake.

1. I thought I had to add it to my config.plist.

2. I thought "0x100001" was for ALC1150 codec.

I've attached my dump file.

getDump.txt

ydeng · July 4, 2017

Hi I need some help with spdif output.

Headphone works great. spdif optic output sounds like passed through a low pass filter, only low frequency

is present.

kextstat | grep HDA

97 0 0xffffff7f80ef4000 0x22000 0x22000 org.voodoo.driver.VoodooHDA (2.9.0d10) no UUID <92 12 7 5 4 3>

Get dump is attached.

Thank you.

Ok, after a reboot PCM works. I think the blue-player messes things up trying to do raw digital by-pass.

audio_dump.zip

VoodooHDA 3.0.2

Recommended Posts

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites