MaLd0n Posted January 13, 2018 Share Posted January 13, 2018 OK here s the last efi folder I booted with with only the dsdt u told me to boot with CLOVER.zip btw, u can use new drivers instead OsxAptioFix2Drv-free2000.efi AptioMemoryFix.zip credits https://github.com/vit9696/AptioFix new ioreg after reboot 3 Link to comment Share on other sites More sharing options...
maxx7650 Posted January 13, 2018 Share Posted January 13, 2018 I will try this clover folder Maldon and report back thanks for the help so far Link to comment Share on other sites More sharing options...
maxx7650 Posted January 14, 2018 Share Posted January 14, 2018 @Maldon I checked it out only sleep is not working it wakes up,probably because of the vga card 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted January 14, 2018 Share Posted January 14, 2018 @Maldon I checked it out only sleep is not working it wakes up,probably because of the vga card try DSDT.aml.zip 1 Link to comment Share on other sites More sharing options...
maxx7650 Posted January 15, 2018 Share Posted January 15, 2018 Thanks Maldon this one works , I have a question my rx560 goes out to my 4k tv with hdmi 2 cable the only problem is that it puts out 30 hz and not 60 hz because of apple hdmi 1.4 limitation. Is it possible to fool the os to think the hdmi port is a DP port so it can output 60HZ? 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted January 15, 2018 Share Posted January 15, 2018 Thanks Maldon this one works , I have a question my rx560 goes out to my 4k tv with hdmi 2 cable the only problem is that it puts out 30 hz and not 60 hz because of apple hdmi 1.4 limitation. Is it possible to fool the os to think the hdmi port is a DP port so it can output 60HZ? idk, never use it but i think here in forum u found infos about it 1 Link to comment Share on other sites More sharing options...
Fergarth Posted January 15, 2018 Share Posted January 15, 2018 Thanks Maldon this one works , I have a question my rx560 goes out to my 4k tv with hdmi 2 cable the only problem is that it puts out 30 hz and not 60 hz because of apple hdmi 1.4 limitation. Is it possible to fool the os to think the hdmi port is a DP port so it can output 60HZ? http://www.insanelymac.com/forum/topic/330560-pre-release-macos-high-sierra-10133/?p=2566312"]http://www.insanelymac.com/forum/topic/330560-pre-release-macos-high-sierra-10133/?p=2566312 1 Link to comment Share on other sites More sharing options...
maxx7650 Posted January 18, 2018 Share Posted January 18, 2018 http://www.insanelymac.com/forum/topic/330560-pre-release-macos-high-sierra-10133/?p=2566312"]http://www.insanelymac.com/forum/topic/330560-pre-release-macos-high-sierra-10133/?p=2566312 Are you connected with DP to DP ? from hackintosh to a monitor? 1 Link to comment Share on other sites More sharing options...
Fergarth Posted January 18, 2018 Share Posted January 18, 2018 Are you connected with DP to DP ? from hackintosh to a monitor? Yes! DP GTX 960 to DP LG 4K Link to comment Share on other sites More sharing options...
maxx7650 Posted January 18, 2018 Share Posted January 18, 2018 Yes! DP GTX 960 to DP LG 4K Thats what I thought , I'm trying to connect it to a 4k LG tv with hdmi2 Link to comment Share on other sites More sharing options...
Fergarth Posted January 18, 2018 Share Posted January 18, 2018 Thats what I thought , I'm trying to connect it to a 4k LG tv with hdmi2But my system also works well on HDMI. The only problem is that in high resolution, HDMI only gives 30Hz and obviously, I prefer high resolution at 60Hz by DP. Link to comment Share on other sites More sharing options...
maxx7650 Posted January 19, 2018 Share Posted January 19, 2018 But on my system it also works well on HDMI. The only problem is that in high resolution, HDMI only gives 30Hz and obviously, I prefer high resolution at 60Hz by DP. Same here 4k works only on 30 HZ on the tv, I ordered an active DP-HDMI 2.0 cable- Club3d CAC 1080- lets see when it arrives if will work Link to comment Share on other sites More sharing options...
maxx7650 Posted January 19, 2018 Share Posted January 19, 2018 I m having a problem now with the motu usb sound card it start to crackle how can I identify the problem where is it coming from. This is a big problem for me cos i m using the hack for music production Any help is highly apreciated Link to comment Share on other sites More sharing options...
MaLd0n Posted January 19, 2018 Share Posted January 19, 2018 remove kexts about audio onboard, AppleAlc and codec commander 1 Link to comment Share on other sites More sharing options...
maxx7650 Posted January 19, 2018 Share Posted January 19, 2018 i ll try it and report back thanks maldon Link to comment Share on other sites More sharing options...
maxx7650 Posted January 20, 2018 Share Posted January 20, 2018 i ll try it and report back thanks maldon @ Maldon I tried with and without same results even made a fresh install , when the sound goes crackling and I change the output to hdmi the sound is good .only from the usb sound card is crackling I unplug the sound card and plug it back the sound gets back to normal ,I can't figure out why is happening . I will upload the efi and another ioreg maybe u can spot something EFI.zip adam’s Mac Pro.zip 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted January 20, 2018 Share Posted January 20, 2018 @ Maldon I tried with and without same results even made a fresh install , when the sound goes crackling and I change the output to hdmi the sound is good .only from the usb sound card is crackling I unplug the sound card and plug it back the sound gets back to normal ,I can't figure out why is happening . I will upload the efi and another ioreg maybe u can spot something check if problem is a usb Test1.zip what program u have a sound problem? Link to comment Share on other sites More sharing options...
maxx7650 Posted January 20, 2018 Share Posted January 20, 2018 watching youtbe or videos on chrome and safari ,reinstalling logic prox now to see if that gets problems too. The dsdt and config are the same that i uploaded or are different? Link to comment Share on other sites More sharing options...
MaLd0n Posted January 20, 2018 Share Posted January 20, 2018 diferent, removed device ec, config.plist diff too and other version usbinjectall U use new driver from vit6969? use it instead old OsxAptioFixDrv AptioMemoryFix.efi.zip Link to comment Share on other sites More sharing options...
maxx7650 Posted January 20, 2018 Share Posted January 20, 2018 so I should use the old osxaptio2000 instead of aptiomemoryfix? Link to comment Share on other sites More sharing options...
MaLd0n Posted January 20, 2018 Share Posted January 20, 2018 use only AptioMemoryFix Link to comment Share on other sites More sharing options...
maxx7650 Posted January 20, 2018 Share Posted January 20, 2018 OK i will try with new dsdt and config + kexts and report back.... Link to comment Share on other sites More sharing options...
MaLd0n Posted January 20, 2018 Share Posted January 20, 2018 u can test in 44,1khz too, in some cases, high cause problems Link to comment Share on other sites More sharing options...
maxx7650 Posted January 21, 2018 Share Posted January 21, 2018 I tried with test file same result , i cought the problem in console and made a copy , sound.rtf Link to comment Share on other sites More sharing options...
MorenoAv Posted January 22, 2018 Share Posted January 22, 2018 Hi MaLd0n, Could you give a look my ssd.aml and see if is alright because my cpu are running very hot, and I don t know why... Thanks for your time Cheers ssdt.aml.rtf 1 Link to comment Share on other sites More sharing options...
Recommended Posts