MaLd0n Posted January 1, 2018 Share Posted January 1, 2018 Tell me in what direction to look for . u can test what patch cause problem, use Disable option, reboot and test, one by one, without a native support the way is not easy, but work, need tests. use last IPG Install Intel Power Gadget.pkg.zip in my case my processor stay at 2.4, 2.6, if i use brumbaer kext i have all PStates, but broke my sleep, i prefer Sleep now Link to comment Share on other sites More sharing options...
pitrysha Posted January 1, 2018 Share Posted January 1, 2018 u can test what patch cause problem, use Disable option, reboot and test, one by one, without a native support the way is not easy, but work, need tests. use last IPG Install Intel Power Gadget.pkg.zip in my case my processor stay at 2.4, 2.6, if i use brumbaer kext i have all PStates, but broke my sleep, i prefer Sleep now Thank you for the great work. 1 Link to comment Share on other sites More sharing options...
jabbaranks Posted January 1, 2018 Share Posted January 1, 2018 Does anyone have all USB ports working?? Im missing some in High Sierra... I can post a copy of my EFI folder anf my IOREG Here is my Clover folder and my IOREG Motherboard X99P-SLI F24 Processor Intel 6800k Memory 32GB Graphics GTX 960 Drives Multiple SSD and 1 Intel 600P NVME EFI 2.zip Jabbas Mac Pro.zip 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted January 2, 2018 Share Posted January 2, 2018 Does anyone have all USB ports working?? Im missing some in High Sierra... I can post a copy of my EFI folder anf my IOREG Here is my Clover folder and my IOREG Motherboard X99P-SLI F24 Processor Intel 6800k Memory 32GB Graphics GTX 960 Drives Multiple SSD and 1 Intel 600P NVME try it, dont change or add nothing, only replace full folder, reboot and send me new ioreg, test ur USB CLOVER.zip Link to comment Share on other sites More sharing options...
jabbaranks Posted January 2, 2018 Share Posted January 2, 2018 Here are the updated files you requested... attached is a screenshot of my USB and PCI after booting with your Clover folder.. The USB did not change... Jabbas Mac Pro 2.zip USB.zip 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted January 2, 2018 Share Posted January 2, 2018 Here are the updated files you requested... attached is a screenshot of my USB and PCI after booting with your Clover folder.. The USB did not change... how many ports dont work? use it, this version USB.zip Link to comment Share on other sites More sharing options...
jabbaranks Posted January 2, 2018 Share Posted January 2, 2018 Two so far.. Both USB 3 ports on different hubs.. Using the new kexts takes away some of the ports that were working.... Are you using auto or smart auto for XHCI 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted January 2, 2018 Share Posted January 2, 2018 i use all in default and now work only with patch my mobo is a low cost Link to comment Share on other sites More sharing options...
jabbaranks Posted January 2, 2018 Share Posted January 2, 2018 which board are you Using???? I reversed back without the USB injectors and now I only have 1 port that doesnt work.. Will try sleep see if that works now... I appreciate your help... 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted January 2, 2018 Share Posted January 2, 2018 which board are you Using???? I reversed back without the USB injectors and now I only have 1 port that doesnt work.. Will try sleep see if that works now... I appreciate your help... GA X99-UD3P Link to comment Share on other sites More sharing options...
zipp0tm Posted January 2, 2018 Share Posted January 2, 2018 Happy New Year! Sorry for bad english (translate with google translator) I'm from Ukraine I ask for help. A computer was assembled for work. But it does not work stably. In the Cinema 4 and Oktan. Reboots arbitrarily without errors. Now it's 10.12.6, but it will need to be updated to 10.13.2. my configuration motherboard rampage 5 (modified bios 3701) processor 5960x memory 64gb dd4 3000 two video cards GTX1080 ti Samsung SSD 960 EVO 1TB CLOVER.zip Send me Lekh.zip Link to comment Share on other sites More sharing options...
NeXtor Posted January 9, 2018 Share Posted January 9, 2018 During the ssdt tests I’ve noticed that the cpu is not used to the maximum and there are some errors in the boot log.I ran geekbench and the score is low.Ah, a strange thing that is happening is that if I connect the monitor via cable hdmi I no longer have the black screen at startup (for now I have rebooted 30 times and never failed ...) instead if I connect the monitor via displayport cable I have problems. I'm also having a lot of problems with Premiere. When I work there the system always crashes. If I do not open it, the pc never crashes.I am attaching the EFI folder, ioreg, bootlog, geekbench score and AppleIntelInfo log. https://ufile.io/jyg2b P.S.: now I have disabled overclocking and set everything to automatic (Virtualization - vt-d active) and regenerated ssdt.aml with "~ / ssdtPRGen.sh -x 1" but the problems remain Link to comment Share on other sites More sharing options...
maxx7650 Posted January 12, 2018 Share Posted January 12, 2018 Hi guys i need help with my vga card upgraded from gt710 to amd sapphire rx560 2gb cos everyone said its working out of the box. I tried a few things but i m a newbie and I can't figure out why mine is not working it s booting up but in sys report graphics it says 7mb ram and no kext loaded. Maldon you helped me with a patched dsdt last time , but with that dsdt the rx560 wont work. I ll upload my efi ,unpatched dsdt (with the rx560 inside) , and ioreg. Regards Adam! efi rx 560.zip adam Mac Pro-rx560.zip DSDT.adam.zip 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted January 12, 2018 Share Posted January 12, 2018 Hi guys i need help with my vga card upgraded from gt710 to amd sapphire rx560 2gb cos everyone said its working out of the box. I tried a few things but i m a newbie and I can't figure out why mine is not working it s booting up but in sys report graphics it says 7mb ram and no kext loaded. Maldon you helped me with a patched dsdt last time , but with that dsdt the rx560 wont work. I ll upload my efi ,unpatched dsdt (with the rx560 inside) , and ioreg. Regards Adam! https://github.com/vit9696/WhateverGreen 1 Link to comment Share on other sites More sharing options...
maxx7650 Posted January 12, 2018 Share Posted January 12, 2018 https://github.com/vit9696/WhateverGreen I have lilu and whaevergreen in the kext folder ,not working 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted January 12, 2018 Share Posted January 12, 2018 I have lilu and whaevergreen in the kext folder ,not working Remove SSDT, use only SSDT PM if work, we edited files Link to comment Share on other sites More sharing options...
maxx7650 Posted January 13, 2018 Share Posted January 13, 2018 Remove SSDT, use only SSDT PM if work, we edited files Maldon I was able to make it work as you said with ssdt pm only, i ll upload ioreg and dsdt unpatched maybe you can help again Mac Pro adam ioreg.zip DSDT.aml.zip 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted January 13, 2018 Share Posted January 13, 2018 Maldon I was able to make it work as you said with ssdt pm only, i ll upload ioreg and dsdt unpatched maybe you can help again DSDT.aml.zip remove all ssdts, remove ssdt PM too hot patches x99 EVMR to PMCR 4556 4d52 504d 4352 GLAN to GIGE 474c 414e 4749 4745 ALZA to HDEF 414c 5a41 4844 4546 LPC0 to LPCB 4c50 4330 4c50 4342 SMBS to SBUS 534d 4253 5342 5553 XHCI to XHC 5848 4349 5848 435f SAT1 to SATA 5341 5431 5341 5441 HECI to IMEI 4845 4349 494d 4549 EVSS to SAT0 4556 5353 5341 5430 EC0 to EC 4543 305f 4543 5f5f BR3A to PEG0 4252 3341 5045 4730 send me new ioreg after reboot 1 Link to comment Share on other sites More sharing options...
maxx7650 Posted January 13, 2018 Share Posted January 13, 2018 Thanks Maldon here is the ioreg Mac Pro no ssdt.zip 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted January 13, 2018 Share Posted January 13, 2018 u put DSDT in Clover/Acpi/Patched? Link to comment Share on other sites More sharing options...
maxx7650 Posted January 13, 2018 Share Posted January 13, 2018 u put DSDT in Clover/Acpi/Patched? No i deleted everything as you said even the extracted files from clover with F4. Do you want me to do another one? 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted January 13, 2018 Share Posted January 13, 2018 put it in Clover/Acpi/Patched http://www.insanelymac.com/forum/index.php?app=core&module=attach§ion=attach&attach_id=282520 reboot and extract new ioreg after reboot Link to comment Share on other sites More sharing options...
maxx7650 Posted January 13, 2018 Share Posted January 13, 2018 Ok i put that dsdt i downloaded from your link here's the new ioreg Mac Pro adam dsdt.zip 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted January 13, 2018 Share Posted January 13, 2018 Ok i put that dsdt i downloaded from your link here's the new ioreg i need check ur clover folder, i think u use xdsm patch, _DSM into DSDT dont work remove ur serials and post ur full clover folder here Link to comment Share on other sites More sharing options...
maxx7650 Posted January 13, 2018 Share Posted January 13, 2018 OK here s the last efi folder I booted with with only the dsdt u told me to boot with EFI.zip 1 Link to comment Share on other sites More sharing options...
Recommended Posts