MaLd0n Posted December 30, 2017 Share Posted December 30, 2017 Hey guys can someone please help me with my hack it's going to sleep but it wakes up in 2 seconds. I'll atach EFI , appleintelinfo.kext output and ioreg Here is the ioreg too post ur original DSDT here and one ioreg IORegistryExplorer.app.zip Link to comment Share on other sites More sharing options...
maxx7650 Posted December 30, 2017 Share Posted December 30, 2017 Thanks for the reply MaLd0n i ll upload the files DSDT AND IOREG.zip 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted December 30, 2017 Share Posted December 30, 2017 Thanks for the reply MaLd0n i ll upload the files Try CLOVER.zip use wake from power button let me know dont need SSDT for PM, try without inject usb too send me new ioreg with new files after reboot 1 Link to comment Share on other sites More sharing options...
maxx7650 Posted December 30, 2017 Share Posted December 30, 2017 Try CLOVER.zip use wake from power button let me know dont need SSDT for PM, try without inject usb too send me new ioreg with new files after reboot Thanks for the files Maldon need more testing to do so far still missing C1 C3 states in appleinfo.kext bt now C6 shows up Now sleep is working but wont wake up from mouse or keyb only from power button, my question is if it s possible to achieve the same thing with ssdt sleep from my older EFI folder and not needing a dsdt. Cos my GB score just went down a lot 1000+ on single and more then 5000 on multi Mac Pro ADAM.zip AppleIntelInfo.kext v2.rtf 2 Link to comment Share on other sites More sharing options...
MaLd0n Posted December 31, 2017 Share Posted December 31, 2017 Thanks for the files Maldon need more testing to do so far still missing C1 C3 states in appleinfo.kext bt now C6 shows up Now sleep is working but wont wake up from mouse or keyb only from power button, my question is if it s possible to achieve the same thing with ssdt sleep from my older EFI folder and not needing a dsdt. Cos my GB score just went down a lot 1000+ on single and more then 5000 on multi before DSDT u have only c6 too, u need check ur patches in "Kernel to Patch" for generate C3, C6, u need more patches for a stable score/perfomance DSDT about PM have only PlugInType=1 instead SSDT pike, dont need SSDT, PlugInType=1 is a native patch from Real MacPro6,1 DSDT Check my config.plist x99, check Kernel to Patch config.plist.zip many patches don't work with SSDT and SSDT just inject in DSDT, if u have a stable bios version, the best is full DSDT patched instead Clover patches or SSDTs, but all work good, Clover is magic! Sleep, no, in ur case the USB wake ur Hack, the best to avoid problems is remove _PRW from devices and Wake from Power button, is a very old patch, u can check in search forum. U can try create usb SSDT with _prw correct state If u apply a correct patches for ur processor, ur score stay same and good, my 5820k stay at 24500, minimal variations, 100+ or 100- 2 Link to comment Share on other sites More sharing options...
pitrysha Posted December 31, 2017 Share Posted December 31, 2017 Hi everyone! Help please complete DSDT. Thank you. Happy New Year, everyone! Hi everyone! Help please complete DSDT. Thank you. Happy New Year, everyone! Архив.zip 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted December 31, 2017 Share Posted December 31, 2017 Hi everyone! Help please complete DSDT. Thank you. Happy New Year, everyone! Ur tables is very diff take a test with DSDT without SSDTs DSDT.pitrysha.zip send me new ioreg after reboot with new files Link to comment Share on other sites More sharing options...
pitrysha Posted December 31, 2017 Share Posted December 31, 2017 With your DSDT. dsdt.zip n0-dsdt.zip Link to comment Share on other sites More sharing options...
maxx7650 Posted December 31, 2017 Share Posted December 31, 2017 before DSDT u have only c6 too, u need check ur patches in "Kernel to Patch" for generate C3, C6, u need more patches for a stable score/perfomance Captura de Tela 2017-12-30 às 22.16.16.png DSDT about PM have only PlugInType=1 instead SSDT pike, dont need SSDT, PlugInType=1 is a native patch from Real MacPro6,1 DSDT Captura de Tela 2017-12-30 às 22.23.25.png Check my config.plist x99, check Kernel to Patch config.plist.zip many patches don't work with SSDT and SSDT just inject in DSDT, if u have a stable bios version, the best is full DSDT patched instead Clover patches or SSDTs, but all work good, Clover is magic! Sleep, no, in ur case the USB wake ur Hack, the best to avoid problems is remove _PRW from devices and Wake from Power button, is a very old patch, u can check in search forum. U can try create usb SSDT with _prw correct state If u apply a correct patches for ur processor, ur score stay same and good, my 5820k stay at 24500, minimal variations, 100+ or 100- I will try your config to see what happens i ll report back and thanks for the help!!! 1 Link to comment Share on other sites More sharing options...
pitrysha Posted December 31, 2017 Share Posted December 31, 2017 With your DSDT. Ur tables is very diff take a test with DSDT without SSDTs DSDT.pitrysha.zip send me new ioreg after reboot with new files dsdt-test.zip 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted December 31, 2017 Share Posted December 31, 2017 DSDT.pitrysha 02.zip what ur mobo? send me new ioreg Link to comment Share on other sites More sharing options...
pitrysha Posted December 31, 2017 Share Posted December 31, 2017 DSDT.pitrysha 02.zip what ur mobo? send me new ioreg MaLd0n. You are genius. Thank you kind man. DSDT-2.zip 1 Link to comment Share on other sites More sharing options...
maxx7650 Posted December 31, 2017 Share Posted December 31, 2017 @Maldon i checked out your config but unfortunately the system wont boot with it, can you help me find the exact kernel patches for my cpu to enable C1-C3 STATES? I also forgot to mention that my bios on my mobo ASUS X99AII is not patched 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted December 31, 2017 Share Posted December 31, 2017 MaLd0n. You are genius. Thank you kind man. looks good, c3, c6, all devices load what do you think? what not work? let me know @Maldon i checked out your config but unfortunately the system wont boot with it, can you help me find the exact kernel patches for my cpu to enable C1-C3 STATES? I also forgot to mention that my bios on my mobo ASUS X99AII is not patched u need test patches, other processor dont use my config.plist, just for ur check check okrasit patches about perfomance Link to comment Share on other sites More sharing options...
pitrysha Posted December 31, 2017 Share Posted December 31, 2017 looks good, c3, c6, all devices load what do you think? what not work? let me know u need test patches, other processor dont use my config.plist, just for ur check check okrasit patches about perfomance I will test for longer and answer. Thank you . 1 Link to comment Share on other sites More sharing options...
maxx7650 Posted December 31, 2017 Share Posted December 31, 2017 looks good, c3, c6, all devices load what do you think? what not work? let me know u need test patches, other processor dont use my config.plist, just for ur check check okrasit patches about perfomance Thanks so far for the help okrasit patch worked, so you mean that i should test those patches one by one from your config file to see if it enables the c-states? or are there other patches for haswell too if yes where can i find them? 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted January 1, 2018 Share Posted January 1, 2018 very old topic here https://pikeralpha.wordpress.com I will test for longer and answer. Thank you . Enjoy! Link to comment Share on other sites More sharing options...
pitrysha Posted January 1, 2018 Share Posted January 1, 2018 looks good, c3, c6, all devices load what do you think? what not work? let me know u need test patches, other processor dont use my config.plist, just for ur check check okrasit patches about perfomance MaLd0n. Thanks, all works. Tell me why the frequency of the CPU on the tests drops to 2600, should be 2800. Maybe I need another patch? Thank you very much ! Test.zip 1 Link to comment Share on other sites More sharing options...
maxx7650 Posted January 1, 2018 Share Posted January 1, 2018 MaLd0n. Thanks, all works. Tell me why the frequency of the CPU on the tests drops to 2600, should be 2800. Maybe I need another patch? Thank you very much ! try to add this kernel patch 89d8c1e0 084863d0 - b800ff00 004863d0 - xcpm performance fix 1 (wrsmr fix to get CPU max) © okrasit/0x199 - 10.13.x We have the same cpu mine goes up to 2.79 ghz Can you please share your config file and bios settings to see how u got C1 C3 STATES? 1 Link to comment Share on other sites More sharing options...
augustopaulo Posted January 1, 2018 Share Posted January 1, 2018 Hi fabiosun, Thanks for the heads up! Checking.... Hi MaLd0n, I keep getting more impressed every time you help me!! I've PM you back the result of the test requested. Boa sorte, Paulo Hi MaLD0n, Feliz ano novo de 2018/Happy new 2018 year!! Please check your PM, as I've been able to identify the culprit _DSM method that prevented my system's PAUSE & failed PCI information... Boa sorte, Paulo 1 Link to comment Share on other sites More sharing options...
pitrysha Posted January 1, 2018 Share Posted January 1, 2018 try to add this kernel patch 89d8c1e0 084863d0 - b800ff00 004863d0 - xcpm performance fix 1 (wrsmr fix to get CPU max) © okrasit/0x199 - 10.13.x We have the same cpu mine goes up to 2.79 ghz Can you please share your config file and bios settings to see how u got C1 C3 STATES? I gave you my settings on another site for dj_adam21 , they have not changed. And the files are higher. Link to comment Share on other sites More sharing options...
maxx7650 Posted January 1, 2018 Share Posted January 1, 2018 I gave you my settings on another site for dj_adam21 , they have not changed. And the files are higher. Ohhh i tried those settings don't work for me Link to comment Share on other sites More sharing options...
MaLd0n Posted January 1, 2018 Share Posted January 1, 2018 MaLd0n. Thanks, all works. Tell me why the frequency of the CPU on the tests drops to 2600, should be 2800. Maybe I need another patch? Thank you very much ! Need check patches in config.plist/kernel to patch Hi MaLD0n, Feliz ano novo de 2018/Happy new 2018 year!! Please check your PM, as I've been able to identify the culprit _DSM method that prevented my system's PAUSE & failed PCI information... Boa sorte, Paulo Feliz Ano novo! Saúde e Sucesso! Done! Tell me why the frequency of the CPU on the tests drops to 2600, should be 2800. Maybe I need another patch? the chipset and processors is problematic with PM, now i use only CoffeeLake 8700k, native support, all work with full DSDT patch and Power Management only add lttle _DSM into DSDT, into scope label _PR.PR00, very good perfomance and native support, x299 now in iMacPro too, new Era is comming! 1 Link to comment Share on other sites More sharing options...
pitrysha Posted January 1, 2018 Share Posted January 1, 2018 Need check patches in config.plist/kernel to patch Feliz Ano novo! Saúde e Sucesso! Done! the chipset and processors is problematic with PM, now i use only CoffeeLake 8700k, native support, all work with full DSDT patch and Power Management only add lttle _DSM into DSDT, into scope label _PR.PR00, very good perfomance and native support, x299 now in iMacPro too, new Era is comming! Tell me in what direction to look for . CLOVER.zip 1 Link to comment Share on other sites More sharing options...
Guest Posted January 1, 2018 Share Posted January 1, 2018 Hi pitrysha frequency drop from 2.8 to 2.6 in multicore benchmark test is in my opinion a OSX / cinebench problem also for my 2696V4 cpu In windows I have always 2.8 Ghz in cinevench cpu multicore test in osx it drops @2.6 so in windows I have a bench of about 3.150 and in osx of about 2.930 I have had same behavior also with your 2696V3 cpu I had some time ago MaLd0n. Thanks, all works. Tell me why the frequency of the CPU on the tests drops to 2600, should be 2800. Maybe I need another patch? Thank you very much ! Link to comment Share on other sites More sharing options...
Recommended Posts