nmano Posted December 2, 2017 Author Share Posted December 2, 2017 Hi nmano it is not working well it miss Nvidia policy patch for 6.1 SMBIOS so I have to start without Nvidia web Driver then I see few new lines in PCI as you can see: attached also new ioreg as requested Thank you Hi fabiosun You have to remove clover config DSDT patches. Link to comment Share on other sites More sharing options...
Guest Posted December 2, 2017 Share Posted December 2, 2017 Hi nmano I have only Rename ALZA to HDEF Change XHCI to XHC in my config.. all of both? Link to comment Share on other sites More sharing options...
nmano Posted December 2, 2017 Author Share Posted December 2, 2017 Hi nmano I would like to try your ssdt all-in-one method could you make it for me too? Thanks P.S.: I have some problems with nvidia web drivers. very often the system crashes. If I disable web drivers, the pc is fine but without cuda acceleration Hi Nextor Can you test and update ioreg Hi nmano I have only Rename ALZA to HDEF Change XHCI to XHC in my config.. all of both? Yes X99_Injector USB 3.kext= XHC1 Hi fabiosun Test 2 SSDT-X99-All_Nextor.aml.zip Test 2_SSDT-X99-All_Fabiosun.aml.zip 1 Link to comment Share on other sites More sharing options...
Guest Posted December 2, 2017 Share Posted December 2, 2017 some good progress https://imgur.com/a/DBNvh but to login I have to connect a new mouse and keyboard otherwise I do not have both Link to comment Share on other sites More sharing options...
nmano Posted December 2, 2017 Author Share Posted December 2, 2017 some good progress https://imgur.com/a/DBNvh but to login I have to connect a new mouse and keyboard otherwise I do not have both Update ioreg and SSDT Thank you. 1 Link to comment Share on other sites More sharing options...
Guest Posted December 2, 2017 Share Posted December 2, 2017 (edited) On 12/2/2017 at 4:04 PM, nmano said: Update ioreg and SSDT Thank you. thank you ps I have no usb injector and I have xhci in bios enabled (not smart auto) Edited March 15, 2018 by Guest cleaning quota Link to comment Share on other sites More sharing options...
nmano Posted December 2, 2017 Author Share Posted December 2, 2017 thank you ps I have no usb injector and I have xhci in bios enabled (not smart auto) Test 3 Test 3_SSDT-X99-All_Fabiosun.aml.zip 1 Link to comment Share on other sites More sharing options...
Guest Posted December 2, 2017 Share Posted December 2, 2017 if I don'r rename I have no usb mouse and keyboard then I am using your test 2 ssdt explain better thank you! :-) If you want to rename XHC or XHCI or XHC1 in SSDT Link to comment Share on other sites More sharing options...
Fergarth Posted December 2, 2017 Share Posted December 2, 2017 some good progress https://imgur.com/a/DBNvh but to login I have to connect a new mouse and keyboard otherwise I do not have both Yep I tested your "test 2 ssdt" and the same happened here on my Asus even changing the usb configuration on bios...nmano can you explain the part of rename xhc or xhci... please? I'm trying here, too ? Even because I think fabiosun's SSDT should work fine on my system ? 1 Link to comment Share on other sites More sharing options...
nmano Posted December 2, 2017 Author Share Posted December 2, 2017 fabiosun Test 3_SSDT-X99-All_Fabiosun.aml.zip Yep I tested your "test 2 ssdt" and the same happened here on my Asus even changing the usb configuration on bios...nmano can you explain the part of rename xhc or xhci... please? I'm trying here, too ?can you explain the part of rename xhc or xhci ... please? I'm trying here, too. Even because I think fabiosun's SSDT should work fine on my system ? X99_Injector USB 3.kext I rename device XHCI to XHC1 in SSDT X99_Injector USB 3.kext set to XHC1 1 Link to comment Share on other sites More sharing options...
Guest Posted December 2, 2017 Share Posted December 2, 2017 (edited) fabiosun Test 3_SSDT-X99-All_Fabiosun.aml.zip X99_Injector USB 3.kext I rename device XHCI to XHC1 in SSDT X99_Injector USB 3.kext set to XHC1 Hi nmano I have ended my quote like for today Your ssdt could work without using X99_Injector USB 3.kext? I am asking because I am not using any usb injector and I am using only for limits patch tested USB not working Edited December 2, 2017 by Guest Link to comment Share on other sites More sharing options...
nmano Posted December 2, 2017 Author Share Posted December 2, 2017 Hi nmano I have ended my quote like for today Your ssdt could work without using X99_Injector USB 3.kext? I am asking because I am not using any usb injector and I am using only for limits patch tested USB not working TRY this without X99_Injector USB 3.kext Test 4_SSDT-X99-All_Fabiosun.aml.zip 2 Link to comment Share on other sites More sharing options...
Guest Posted December 2, 2017 Share Posted December 2, 2017 test 4 failed with stop sign and corruption of chars without signal on usb thank you for your effort TRY this without X99_Injector USB 3.kext Link to comment Share on other sites More sharing options...
Fergarth Posted December 2, 2017 Share Posted December 2, 2017 TRY this without X99_Injector USB 3.kextHere (test 4) SSDT works! But probably need a little tuning... because it was created for fabiosun and not for me. But it works! Attached results, using Smart Auto and X99 Injector...Now downloading 13.2 Public Beta 6 Result with my Big Fat DSDT.zip Result with SSDT All.zip 1 Link to comment Share on other sites More sharing options...
thenightflyer Posted December 2, 2017 Share Posted December 2, 2017 Hi thenightflyer Can you update #ORI DSDT #Patched DSDT or SSDT #IOREG #Clover Config Thank you. I tested your ssdt but i've black screen at osx login....just like fabio i use an ssdt to rename my graphic card so i can avoid to patch applegraphicspolicy every time system is updated. So i cannot tell you if other things are renamed or not. Link to comment Share on other sites More sharing options...
Guest Posted December 2, 2017 Share Posted December 2, 2017 if you want you can test.. in clover boot option deselect Nvidia web and your system should boot without acceleration if you have "right" clover version in my case 4318 I tested your ssdt but i've black screen at osx login....just like fabio i use an ssdt to rename my graphic card so i can avoid to patch applegraphicspolicy every time system is updated. So i cannot tell you if other things are renamed or not. Link to comment Share on other sites More sharing options...
MICKHAEL Posted December 2, 2017 Share Posted December 2, 2017 nmano i liked how said Fergarth, perfect and functional DSDT, maybe it's already time to change) will you help me? I managed to make SSDT, no so good, black screen, and PCI list mostly empty. i could provide my test SSDT, and Original DSDT and working DSDT. anything alse? Link to comment Share on other sites More sharing options...
NeXtor Posted December 2, 2017 Share Posted December 2, 2017 Hi Nextor Can you test and update ioreg If I disable all .aml files including DSDT keeping only SSDT.aml and SSDT-X99-All_Nextor.aml the system crashes. If I disable all .aml files keeping only DSDT.aml SSDT.aml and SSDT-X99-All_Nextor.aml the system starts but not all the usb ports work and the disk icon is orange. test1.zip Link to comment Share on other sites More sharing options...
nmano Posted December 2, 2017 Author Share Posted December 2, 2017 Here (test 4) SSDT works! But probably need a little tuning... because it was created for fabiosun and not for me. But it works! Attached results, using Smart Auto and X99 Injector... Now downloading 13.2 Public Beta 6 Hi Fergarth PS update your SSDT and IOREG after update Thanks bro. If I disable all .aml files including DSDT keeping only SSDT.aml and SSDT-X99-All_Nextor.aml the system crashes. If I disable all .aml files keeping only DSDT.aml SSDT.aml and SSDT-X99-All_Nextor.aml the system starts but not all the usb ports work and the disk icon is orange. usb.jpgpci.jpg Test 2 update IOREG #test with plan clover config (No need DSDT patches & Fixes) #No DSDT Thank you. Test 2_SSDT-X99-All_Nextor.aml.zip 1 Link to comment Share on other sites More sharing options...
Sygey02 Posted December 2, 2017 Share Posted December 2, 2017 Hi to all ! Can anyone tell me why i can,t open this ssdt file with maciasl? Link to comment Share on other sites More sharing options...
nmano Posted December 3, 2017 Author Share Posted December 3, 2017 Hi fabiosun #Test 5 Enjoy Test 5_SSDT-X99-All_Fabiosun.aml.zip Link to comment Share on other sites More sharing options...
NeXtor Posted December 3, 2017 Share Posted December 3, 2017 Test 2 update IOREG #test with plan clover config (No need DSDT patches & Fixes) #No DSDT Thank you. I keep having random black screen. audio doesn't work. usb seems ok. I attach ioreg without nvidia web driver test2.zip Link to comment Share on other sites More sharing options...
Fergarth Posted December 7, 2017 Share Posted December 7, 2017 Okay, this is my story! Up to 13.1 SU, I have always had graphic acceleration and always with DP 4K connection! From the moment I installed the first 13.2 beta and until the final 13.2, even with the latest Nvidia Web Driver, I can only have black screen. I did not change anything in DSDT or plist config. Although all the updates are done without any errors, something has gone wrong with the graphics or graphics card or the Web Driver... Next step is to replace the DSDT with an SSDT All and if it does not work, I send GTX to the trash and buy an AMD... 2 Link to comment Share on other sites More sharing options...
MaLd0n Posted December 7, 2017 Share Posted December 7, 2017 I send GTX to the trash off send to Brazil lol Cya 3 Link to comment Share on other sites More sharing options...
MICKHAEL Posted December 7, 2017 Share Posted December 7, 2017 Yeah, don't trash, give it to me) I have already one 960 working very well 1 Link to comment Share on other sites More sharing options...
Recommended Posts