nmano Posted November 13, 2017 Author Share Posted November 13, 2017 I tink audio device was work for me its between 1-3 with apple alc. but just without graphics driver! It is any way to make somehow to work hdmi audio from my graphic card ? #Install ori applehda #Install AppleALC #Set Layout ID 1-3 Try with graphics. Link to comment Share on other sites More sharing options...
Sygey02 Posted November 13, 2017 Share Posted November 13, 2017 Tank you! Here its my Ioreg. #Install ori applehda #Install AppleALC #Set Layout ID 1-3 Try with graphics. Do you have original appleHDA.kext for high Sierra? Iosif’s Mac Pro2.zip Link to comment Share on other sites More sharing options...
Smallersen Posted November 14, 2017 Share Posted November 14, 2017 #Sygey02 I had the same problem. Accidentally there was a empty entry in config under "Devices" named "Properties". Removed this and also "Inject" under properties solved my audio issues. 2 Link to comment Share on other sites More sharing options...
nmano Posted November 22, 2017 Author Share Posted November 22, 2017 SSDT with sleep susses. Finally worked everything with one SSDT. Enjoy. SSDT-X99-All_Sleep.aml I just add this code under this devices. GLAN,USB,HDEF,GFX1,XHC1 Name (_PRW, Package (0x02) // _PRW: Power Resources for Wake { 0x6D, Zero }) } SSDT-X99-All_Sleep.aml.zip 5 Link to comment Share on other sites More sharing options...
WeBeRiO Posted November 28, 2017 Share Posted November 28, 2017 ALL IN ONE SSDT # X99_SSDT_Maintained and disassembled by:N.Mano # Credit: RehabMan #Worked ALL Sleep/HDMI #NO DSDT #Enjoy ALL IN ONE SSDT_Latest.zip Why not appears here SPSR Controller ? Thank for all this post 4 Link to comment Share on other sites More sharing options...
nmano Posted November 28, 2017 Author Share Posted November 28, 2017 ALL IN ONE SSDT # X99_SSDT_Maintained and disassembled by:N.Mano #Credits and thanks for who developed patches, kexts and bootloaders. #Check all devices make your own SSDT. #NO DSDT#Enjoy X99_SSDT_Final.zip 6 Link to comment Share on other sites More sharing options...
MMido Posted November 29, 2017 Share Posted November 29, 2017 Hi nmano, in my case with the motherboard I have, it's a bit tricky to do the same thing. I can't figure out some stuff because my motherboard has two PCI bridges PCI0 and PCI1, so to rename devices I think it different. So what I want to know how exactly can I have the original SSDT that I can add my devices like the other original SSDT files you provided for the other motherboards? Is it the same method with clover bootloader and F4? because I did that and I had multiple SDDT files and I couldn't find which one of them I should edit. Can you please have look at the files I provided and guide me to what I can do? X10DAI dump files.zip 1 Link to comment Share on other sites More sharing options...
augustopaulo Posted November 29, 2017 Share Posted November 29, 2017 ALL IN ONE SSDT # X99_SSDT_Maintained and disassembled by:N.Mano #Credits and thanks for who developed patches, kexts and bootloaders. #Check all devices make your own SSDT. #NO DSDT #Enjoy X99_SSDT_Final.zip Hi nmano, Amazing and thanks so much Just for fun, I've used your "SSD-X99-All_Sleep.aml" and for the 1st time ever on any of my hackintosh builds, I was able to fully make system goto to deep sleep and then fully back (with PMDrv.kext for EIST & Corsair PSU link + water cooled H110i GTX USBs active) by pressing the power button, even awakening my Apple Mouse(A1296)+Keyboard(A1314)+trackpad(A1339) bluetooth devices!!!!! Now the drawback: I've lost my HDMI sound to my Panasonic 4k HDR tv and all my System Information PCI devices that were showing up there, so, I wonder if you (or anyone on this thread) can have a look at my configuration and update it so that I can have all the PCI devices showing in my System Info, plus HDMI sound while maintaining this amazing sleep feature ? I've tried a couple of times to edit your "SSD-X99-All_Sleep.aml" files with my SSDT files (EFI->CLOVER->ACPI->patched) by looking through IORegistryExplorer info, but always ended up worst than started!! My current "System Information", PCI section: DPCI Manager Devices detected: Finally, I've uploaded my EFI folder and the IORegistryExplorer .ioreg file. EFI.zipPaulo’s Mac Pro.ioreg.zip 1 Link to comment Share on other sites More sharing options...
nmano Posted November 29, 2017 Author Share Posted November 29, 2017 Hi nmano, Amazing and thanks so much Just for fun, I've used your "SSD-X99-All_Sleep.aml" and for the 1st time ever on any of my hackintosh builds, I was able to fully make system goto to deep sleep and then fully back (with PMDrv.kext for EIST & Corsair PSU link + water cooled H110i GTX USBs active) by pressing the power button, even awakening my Apple Mouse(A1296)+Keyboard(A1314)+trackpad(A1339) bluetooth devices!!!!! Now the drawback: I've lost my HDMI sound to my Panasonic 4k HDR tv and all my System Information PCI devices that were showing up there, so, I wonder if you (or anyone on this thread) can have a look at my configuration and update it so that I can have all the PCI devices showing in my System Info, plus HDMI sound while maintaining this amazing sleep feature ? I've tried a couple of times to edit your "SSD-X99-All_Sleep.aml" files with my SSDT files (EFI->CLOVER->ACPI->patched) by looking through IORegistryExplorer info, but always ended up worst than started!! My current "System Information", PCI section: Informação do Sistema - PCI.jpeg DPCI Manager Devices detected: DPCI Manager 1.jpegDPCI Manager 2.jpegDPCI Manager 3.jpegDPCI Manager 4.jpegDPCI Manager 5.jpeg Finally, I've uploaded my EFI folder and the IORegistryExplorer .ioreg file. EFI.zipPaulo’s Mac Pro.ioreg.zip Hi Paulo Replace this 2 files. Test and report. Paulo.zip 1 Link to comment Share on other sites More sharing options...
augustopaulo Posted November 29, 2017 Share Posted November 29, 2017 Hi Paulo Replace this 2 files. Test and report. Hi nmano, Thanks for helping me once more! I've replaced these 2 files in my EFI folder and after setting my hackintosh into pause, it shuts down, but then restarts (cold start) after around 2 seconds... Remember you saying that the SSDT code below... Name (_PRW, Package (0x02) // _PRW: Power Resources for Wake { 0x6D, Zero }) } ...was required to be inserted into the GLAN,USB,HDEF,GFX1,XHC1 devices, right ? So, in my humble understanding since you've updated/inserted it already into the HDEF & GFX0 (new "SSDT-HDMI.aml") devices, then this also has to be added onto the remaining ones, right ? I've attached the new .ioreg file. Please let me know if you need anything else. Paulo’s Mac Pro 2.ioreg.zip Boa sorte, Paulo 1 Link to comment Share on other sites More sharing options...
nmano Posted November 29, 2017 Author Share Posted November 29, 2017 Hi nmano, Thanks for helping me once more! I've replaced these 2 files in my EFI folder and after setting my hackintosh into pause, it shuts down, but then restarts (cold start) after around 2 seconds... Remember you saying that the SSDT code below... Name (_PRW, Package (0x02) // _PRW: Power Resources for Wake { 0x6D, Zero }) } ...was required to be inserted into the GLAN,USB,HDEF,GFX1,XHC1 devices, right ? So, in my humble understanding since you've updated/inserted it already into the HDEF & GFX0 (new "SSDT-HDMI.aml") devices, then this also has to be added onto the remaining ones, right ? I've attached the new .ioreg file. Please let me know if you need anything else. Paulo’s Mac Pro 2.ioreg.zip Boa sorte, Paulo Now HDMI worked. Try to make all in one SSDT with _PRW. #Test Each device then restart.Every restart you learn something. 2 Link to comment Share on other sites More sharing options...
nmano Posted November 29, 2017 Author Share Posted November 29, 2017 Hi Paulo Replace this 2 files. Test and report. I try my best Please test and report. Enjoy. SSDT-All-Pauio.aml.zip 2 Link to comment Share on other sites More sharing options...
augustopaulo Posted November 30, 2017 Share Posted November 30, 2017 I try my best Please test and report. Enjoy. Hi nmano, Absolutely great!! This is the 1st time that I can see the most devices identified in System Information→HW→PCI and it does put my hackintosh into sleep when I click PAUSE, but it wakes up after 2 seconds, no more cold restarts - almost there !!!! Now my System Information→HW→PCI shows the following: I've highlighted above my Asus ThunderboltEX 3 devices detected by DPCI manager - Do you think you can also add them to the SSDT ? The only device not detected (from the new SSDT) is the Broadcom BCM4360 WLAN adapter - the PCI device & vendor are correct tough... I believe that now that the only thing missing for a successful sleep & awake process is the addition of the USB devices to the SSDT file, which I think, will also make the WLAN device appear in System Information. Attached the .ioreg file again. Thanks for your efforts. Boa sorte, Paulo Paulo’s Mac Pro 3.ioreg.zip 1 Link to comment Share on other sites More sharing options...
nmano Posted November 30, 2017 Author Share Posted November 30, 2017 Hi nmano, Absolutely great!! This is the 1st time that I can see the most devices identified in System Information→HW→PCI and it does put my hackintosh into sleep when I click PAUSE, but it wakes up after 2 seconds, no more cold restarts - almost there !!!! Now my System Information→HW→PCI shows the following: ThunderboltEX4.png I've highlighted above my Asus ThunderboltEX 3 devices detected by DPCI manager - Do you think you can also add them to the SSDT ? The only device not detected (from the new SSDT) is the Broadcom BCM4360 WLAN adapter - the PCI device & vendor are correct tough... I believe that now that the only thing missing for a successful sleep & awake process is the addition of the USB devices to the SSDT file, which I think, will also make the WLAN device appear in System Information. Attached the .ioreg file again. Thanks for your efforts. Boa sorte, Paulo Paulo’s Mac Pro 3.ioreg.zip Hi Paulo #Test and report SSDT-All-Pauio.aml.zip 2 Link to comment Share on other sites More sharing options...
thenightflyer Posted November 30, 2017 Share Posted November 30, 2017 Hi Paulo #Test and report HI nmano i attach you my ioreg...ive thunderbolt card and firewire card too....graphic card is on 1^ slot. Please make an SSDT-all for me too Mac Pro tnf.zip 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted December 1, 2017 Share Posted December 1, 2017 Hi nmano, in my case with the motherboard I have, it's a bit tricky to do the same thing. I can't figure out some stuff because my motherboard has two PCI bridges PCI0 and PCI1, so to rename devices I think it different. So what I want to know how exactly can I have the original SSDT that I can add my devices like the other original SSDT files you provided for the other motherboards? Is it the same method with clover bootloader and F4? because I did that and I had multiple SDDT files and I couldn't find which one of them I should edit. Can you please have look at the files I provided and guide me to what I can do? check DSDT.zip 3 Link to comment Share on other sites More sharing options...
nmano Posted December 1, 2017 Author Share Posted December 1, 2017 HI nmano i attach you my ioreg...ive thunderbolt card and firewire card too....graphic card is on 1^ slot. Please make an SSDT-all for me too Hi thenightflyer Can you update #ORI DSDT #Patched DSDT or SSDT #IOREG #Clover Config Thank you. 2 Link to comment Share on other sites More sharing options...
thenightflyer Posted December 1, 2017 Share Posted December 1, 2017 Hi thenightflyer Can you update #ORI DSDT #Patched DSDT or SSDT #IOREG Thank you. Here they are...in Origin dir there are original DSDT files, in patched SSDT i use now, the one for CPU and the other to rename my GPU. Thanks Archive.zip 1 Link to comment Share on other sites More sharing options...
nmano Posted December 1, 2017 Author Share Posted December 1, 2017 Here they are...in Origin dir there are original DSDT files, in patched SSDT i use now, the one for CPU and the other to rename my GPU. Thanks Hi thenightflyer Can you test this SSDT and update ioreg Thank you. You have to change X99_Injector USB 3.kext XHC to XHC1 or change SSDT in device XHC1 to XHC SSDT-X99-All_thenightflyer.aml.zip 2 Link to comment Share on other sites More sharing options...
Guest Posted December 1, 2017 Share Posted December 1, 2017 (edited) Hi nmano if you have time to have a look here I would like to try a your ssdt all method Thank you Edited March 15, 2018 by Guest cleaning quota Link to comment Share on other sites More sharing options...
Fergarth Posted December 1, 2017 Share Posted December 1, 2017 Lol you do not forgive! ??? I've been thinking about nmano and Mald0n for three days... The truth is that I still keep running my fat, plump, perfect and functional DSDT, but ok, maybe it's already time to change! I think we'll talk tomorrow! ??? 1 Link to comment Share on other sites More sharing options...
NeXtor Posted December 2, 2017 Share Posted December 2, 2017 Hi nmano I would like to try your ssdt all-in-one method could you make it for me too? Thanks P.S.: I have some problems with nvidia web drivers. very often the system crashes. If I disable web drivers, the pc is fine but without cuda acceleration for-all-in-one-ssdt.zip 1 Link to comment Share on other sites More sharing options...
thenightflyer Posted December 2, 2017 Share Posted December 2, 2017 Hi thenightflyer Can you test this SSDT and update ioreg Thank you. You have to change X99_Injector USB 3.kext XHC to XHC1 or change SSDT in device XHC1 to XHC I will test in the afternoon and i will report. Thanks my friend 1 Link to comment Share on other sites More sharing options...
nmano Posted December 2, 2017 Author Share Posted December 2, 2017 Hi nmano if you have time to have a look here I would like to try a your ssdt all method Thank you Hi fabiosun Can you test and update IOREG Thank you. SSDT-X99-All_Fabiosun.aml.zip Link to comment Share on other sites More sharing options...
Guest Posted December 2, 2017 Share Posted December 2, 2017 (edited) Hi nmano it is not working well it miss Nvidia policy patch for 6.1 SMBIOS so I have to start without Nvidia web Driver then I see few new lines in PCI as you can see: attached also new ioreg as requested Thank you Edited March 15, 2018 by Guest cleaning quota Link to comment Share on other sites More sharing options...
Recommended Posts