nmano Posted July 26, 2017 Author Share Posted July 26, 2017 X99 Mac osx 10.13 First of all you'll need to have Install macOS 10.13 Beta.app in your Applications folder. Then, you'll need to right click it and then go to Show Package Contents/Contents/Shared Support and from there mount InstallESD.dmg. Once mounted there you'll find Packages folder and inside Core.pkg. Double click Core.pkg and this will install macOS to desired partition, SSD or HDD. Once done, mount BaseSystem.dmg and then copy System/Library/CoreServices/boot.efi and paste it to the same location System/Library/CoreServices/boot.efi on the installed drive. Boot it with your existing Clover and in few seconds you'll reach desktop screen. Thank you. Clover team and Apple ALC and others naveedamad, 1 Link to comment Share on other sites More sharing options...
Loloflat6 Posted July 26, 2017 Share Posted July 26, 2017 I need some advice about a minimum config for X99 Xeon for my future build ( i post here for a short off topic) : I saw those components wich seems be a good start : - ASROCK X99M Extreme4 - Intel Xeon E5-2603V3 - Procesor 6 cores 1.6 GHz - 15 Mo - LGA2011-v3 - G.SKILL - Ripjaws V Series 64 Go 4 x 16 Go DDR4 - 2133 MHz - WESTERN DIGITAL - WD Black SSD PCIe NVMe 512 Go Can you help me about graphic card may work OOB ? Other sugestions are welcome Link to comment Share on other sites More sharing options...
maxx7650 Posted July 27, 2017 Share Posted July 27, 2017 " Questions about a minimum config for my X99 Xeon build ( prehaps off topic) : - ASROCK X99M Extreme4 - Intel Xeon E5-2603V3 - Procesor 6 cores 1.6 GHz - 15 Mo - LGA2011-v3 - G.SKILL - Ripjaws V Series 64 Go 4 x 16 Go DDR4 - 2133 MHz - WESTERN DIGITAL - WD Black SSD PCIe NVMe 512 Go Can you help me about graphic card may work OOB ? Other sugestions are welcome ;)" Nvidia GT- 610 works oN Yosemite and El Capitan but it does not work on Sierra, Nvidia GT-710 works on Sierra out of the box 1 Link to comment Share on other sites More sharing options...
thenightflyer Posted July 27, 2017 Share Posted July 27, 2017 XCPM 10.12 and 10.13 for Haswell-E XCPM 10.12 and 10.13.zip My friend....the file attached is empty Link to comment Share on other sites More sharing options...
nmano Posted July 27, 2017 Author Share Posted July 27, 2017 try now I apologize for missing file. Link to comment Share on other sites More sharing options...
nmano Posted July 27, 2017 Author Share Posted July 27, 2017 Last login: Thu Jul 27 14:38:58 on console navaratnams-Pro:~ navaratnam$ sudo chown -R root:wheel /Users/navaratnam/Desktop/AppleIntelInfo.kext Password: navaratnams-Pro:~ navaratnam$ sudo chmod -R 755 /Users/navaratnam/Desktop/AppleIntelInfo.kext navaratnams-Pro:~ navaratnam$ sudo kextload /Users/navaratnam/Desktop/AppleIntelInfo.kext navaratnams-Pro:~ navaratnam$ sudo cat /tmp/AppleIntelInfo.dat AppleIntelInfo.kext v2.0 Copyright © 2012-2016 Pike R. Alpha. All rights reserved enableHWP................................: 0 Settings: ------------------------------------------ logMSRs..................................: 1 logIGPU..................................: 0 logCStates...............................: 1 logIPGStyle..............................: 1 InitialTSC...............................: 0xe512306e128e (8395 MHz) MWAIT C-States...........................: 8480 Processor Brandstring....................: Intel(R) Core(TM) i7-5960X CPU @ 3.00GHz Processor Signature..................... : 0x306F2 ------------------------------------------ - Family............................... : 6 - Stepping............................. : 2 - Model................................ : 0x3F (63) Model Specific Registers (MSRs) ------------------------------------------ MSR_CORE_THREAD_COUNT............(0x35) : 0x1E ------------------------------------------ - Core Count........................... : 8 - Thread Count......................... : 16 MSR_PLATFORM_INFO................(0xCE) : 0x80C3BF3811E00 ------------------------------------------ - Maximum Non-Turbo Ratio.............. : 0x1E (3000 MHz) - Ratio Limit for Turbo Mode........... : 1 (programmable) - TDP Limit for Turbo Mode............. : 1 (programmable) - Low Power Mode Support............... : 1 (LPM supported) - Number of ConfigTDP Levels........... : 1 (additional TDP level(s) available) - Maximum Efficiency Ratio............. : 12 - Minimum Operating Ratio.............. : 8 MSR_PMG_CST_CONFIG_CONTROL.......(0xE2) : 0x7E000403 ------------------------------------------ - I/O MWAIT Redirection Enable......... : 1 (enabled, IO read of MSR(0xE4) mapped to MWAIT) - CFG Lock............................. : 0 (MSR not locked) - C3 State Auto Demotion............... : 1 (enabled) - C1 State Auto Demotion............... : 1 (enabled) - C3 State Undemotion.................. : 1 (enabled) - C1 State Undemotion.................. : 1 (enabled) - Package C-State Auto Demotion........ : 1 (enabled) - Package C-State Undemotion........... : 1 (enabled) MSR_PMG_IO_CAPTURE_BASE..........(0xE4) : 0x10414 ------------------------------------------ - LVL_2 Base Address................... : 0x414 - C-state Range........................ : 1 (C6 is the max C-State to include) IA32_MPERF.......................(0xE7) : 0x2308028639 IA32_APERF.......................(0xE8) : 0x26137394DB MSR_FLEX_RATIO...................(0x194) : 0xE0000 ------------------------------------------ MSR_IA32_PERF_STATUS.............(0x198) : 0x280400000C00 ------------------------------------------ - Current Performance State Value...... : 0xC00 (1200 MHz) MSR_IA32_PERF_CONTROL............(0x199) : 0xFF00 ------------------------------------------ - Target performance State Value....... : 0xFF00 (25500 MHz) - Intel Dynamic Acceleration........... : 0 (IDA engaged) IA32_CLOCK_MODULATION............(0x19A) : 0x0 IA32_THERM_INTERRUPT.............(0x19B) : 0x0 IA32_THERM_STATUS................(0x19C) : 0x883C0000 ------------------------------------------ - Thermal Status....................... : 0 - Thermal Log.......................... : 0 - PROCHOT # or FORCEPR# event.......... : 0 - PROCHOT # or FORCEPR# log............ : 0 - Critical Temperature Status.......... : 0 - Critical Temperature log............. : 0 - Thermal Threshold #1 Status.......... : 0 - Thermal Threshold #1 log............. : 0 - Thermal Threshold #2 Status.......... : 0 - Thermal Threshold #2 log............. : 0 - Power Limitation Status.............. : 0 - Power Limitation log................. : 0 - Current Limit Status................. : 0 - Current Limit log.................... : 0 - Cross Domain Limit Status............ : 0 - Cross Domain Limit log............... : 0 - Digital Readout...................... : 60 - Resolution in Degrees Celsius........ : 1 - Reading Valid........................ : 1 (valid) MSR_THERM2_CTL...................(0x19D) : 0x0 IA32_MISC_ENABLES................(0x1A0) : 0x850089 ------------------------------------------ - Fast-Strings......................... : 1 (enabled) - FOPCODE compatibility mode Enable.... : 0 - Automatic Thermal Control Circuit.... : 1 (enabled) - Split-lock Disable................... : 0 - Performance Monitoring............... : 1 (available) - Bus Lock On Cache Line Splits Disable : 0 - Hardware prefetch Disable............ : 0 - Processor Event Based Sampling....... : 0 (PEBS supported) - GV1/2 legacy Enable.................. : 0 - Enhanced Intel SpeedStep Technology.. : 1 (enabled) - MONITOR FSM.......................... : 1 (MONITOR/MWAIT supported) - Adjacent sector prefetch Disable..... : 0 - CFG Lock............................. : 0 (MSR not locked) - xTPR Message Disable................. : 1 (disabled) MSR_TEMPERATURE_TARGET...........(0x1A2) : 0x591200 ------------------------------------------ - Turbo Attenuation Units.............. : 0 - Temperature Target................... : 89 - TCC Activation Offset................ : 0 MSR_MISC_PWR_MGMT................(0x1AA) : 0x400000 ------------------------------------------ - EIST Hardware Coordination........... : 0 (hardware coordination enabled) - Energy/Performance Bias support...... : 1 - Energy/Performance Bias.............. : 0 (disabled/MSR not visible to software) - Thermal Interrupt Coordination Enable : 1 (thermal interrupt routed to all cores) MSR_TURBO_RATIO_LIMIT............(0x1AD) : 0x2B2B2B2B2B2B2B2B ------------------------------------------ - Maximum Ratio Limit for C01.......... : 2B (4300 MHz) - Maximum Ratio Limit for C02.......... : 2B (4300 MHz) - Maximum Ratio Limit for C03.......... : 2B (4300 MHz) - Maximum Ratio Limit for C04.......... : 2B (4300 MHz) - Maximum Ratio Limit for C05.......... : 2B (4300 MHz) - Maximum Ratio Limit for C06.......... : 2B (4300 MHz) - Maximum Ratio Limit for C07.......... : 2B (4300 MHz) - Maximum Ratio Limit for C08.......... : 2B (4300 MHz) IA32_ENERGY_PERF_BIAS............(0x1B0) : 0x1 ------------------------------------------ - Power Policy Preference...............: 1 (highest performance) MSR_POWER_CTL....................(0x1FC) : 0x21040059 ------------------------------------------ - Bi-Directional Processor Hot..........: 1 (enabled) - C1E Enable............................: 0 (disabled) MSR_RAPL_POWER_UNIT..............(0x606) : 0xA0E03 ------------------------------------------ - Power Units.......................... : 3 (1/8 Watt) - Energy Status Units.................. : 14 (61 micro-Joules) - Time Units .......................... : 10 (976.6 micro-Seconds) MSR_PKG_POWER_LIMIT..............(0x610) : 0x7FFD00014EA82 ------------------------------------------ - Package Power Limit #1............... : 3408 Watt - Enable Power Limit #1................ : 1 (enabled) - Package Clamping Limitation #1....... : 0 (disabled) - Time Window for Power Limit #1....... : 10 (2560 milli-Seconds) - Package Power Limit #2............... : 4090 Watt - Enable Power Limit #2................ : 1 (enabled) - Package Clamping Limitation #2....... : 1 (allow going below OS-requested P/T state setting Time Window for Power Limit #2) - Time Window for Power Limit #2....... : 3 (20 milli-Seconds) - Lock................................. : 0 (MSR not locked) MSR_PKG_ENERGY_STATUS............(0x611) : 0x628157E ------------------------------------------ - Total Energy Consumed................ : 6304 Joules (Watt = Joules / seconds) MSR_PKG_POWER_INFO...............(0x614) : 0x1280460 ------------------------------------------ - Thermal Spec Power................... : 140 Watt - Minimum Power........................ : 0 - Maximum Power........................ : 0 - Maximum Time Window.................. : 0 MSR_PP0_POWER_LIMIT..............(0x638) : 0x14FFD0 ------------------------------------------ - Power Limit.......................... : 4090 Watt - Enable Power Limit................... : 1 (enabled) - Clamping Limitation.................. : 0 (disabled) - Time Window for Power Limit.......... : 10 (10240 milli-Seconds) - Lock................................. : 0 (MSR not locked) MSR_PP0_ENERGY_STATUS............(0x639) : 0x0 MSR_TURBO_ACTIVATION_RATIO.......(0x64C) : 0x0 MSR_CONFIG_TDP_NOMINAL...........(0x648) : 0x1E MSR_CONFIG_TDP_LEVEL1............(0x649) : 0x940000001B0460 MSR_CONFIG_TDP_LEVEL2............(0x64a) : 0x94000000000000 MSR_CONFIG_TDP_CONTROL...........(0x64b) : 0x0 MSR_TURBO_ACTIVATION_RATIO.......(0x64c) : 0x0 MSR_PKGC6_IRTL...................(0x60b) : 0x0 MSR_PKG_C2_RESIDENCY.............(0x60d) : 0x1F5349EC84 MSR_PKG_C3_RESIDENCY.............(0x3f8) : 0x1FB600C MSR_PKG_C6_RESIDENCY.............(0x3f9) : 0x8157003B82 IA32_TSC_DEADLINE................(0x6E0) : 0xE5123B05752C CPU Ratio Info: ------------------------------------------ Base Clock Frequency (BLCK)............. : 100 MHz Maximum Efficiency Ratio/Frequency.......: 12 (1200 MHz) Maximum non-Turbo Ratio/Frequency........: 30 (3000 MHz) Maximum Turbo Ratio/Frequency............: 43 (4300 MHz) P-State ratio * 100 = Frequency in MHz ------------------------------------------ CPU P-States [ (12) 35 ] CPU C3-Cores [ 0 4 6 9 11 14 ] CPU C6-Cores [ 0 2 4 6 8 10 12 14 ] CPU P-States [ (12) 23 35 ] CPU C3-Cores [ 0 1 4 6 8 9 11 14 ] CPU C6-Cores [ 0 2 4 6 8 9 10 12 14 ] CPU P-States [ (12) 23 32 35 ] CPU C3-Cores [ 0 1 4 6 8 9 11 14 15 ] CPU P-States [ 12 23 26 32 35 (43) ] CPU C3-Cores [ 0 1 4 6 8 9 10 11 14 15 ] CPU P-States [ (12) 20 23 26 32 35 43 ] CPU P-States [ (12) 20 23 26 32 35 39 43 ] CPU P-States [ (12) 20 23 24 26 32 35 39 43 ] CPU C3-Cores [ 0 1 4 6 7 8 9 10 11 14 15 ] CPU P-States [ 12 20 23 24 (25) 26 32 35 39 43 ] CPU P-States [ (12) 20 23 24 25 26 27 32 35 39 43 ] CPU C6-Cores [ 0 1 2 4 6 8 9 10 12 14 ] CPU P-States [ (12) 20 23 24 25 26 27 32 34 35 39 43 ] CPU C6-Cores [ 0 1 2 4 6 8 9 10 12 14 15 ] CPU C3-Cores [ 0 1 4 5 6 7 8 9 10 11 14 15 ] CPU P-States [ (12) 20 23 24 25 26 27 31 32 34 35 39 43 ] CPU P-States [ (12) 20 23 24 25 26 27 28 31 32 34 35 39 43 ] CPU P-States [ 12 18 20 (21) 23 24 25 26 27 28 31 32 34 35 39 43 ] CPU P-States [ (12) 18 20 21 23 24 25 26 27 28 30 31 32 34 35 39 43 ] CPU P-States [ (12) 16 18 20 21 23 24 25 26 27 28 30 31 32 34 35 39 43 ] CPU P-States [ (12) 16 18 20 21 22 23 24 25 26 27 28 30 31 32 34 35 39 43 ] navaratnams-Pro:~ navaratnam$ XCPM 10.12 and 10.13 for Haswell-E update Bios settings C1E: Disabled C6/C7: Enabled EIST-Enabled XCPM 10.12 and 10.13 update.zip 2 Link to comment Share on other sites More sharing options...
nmano Posted July 29, 2017 Author Share Posted July 29, 2017 Can I know how to fix unknown CPU I try with clover type 2561 not work Link to comment Share on other sites More sharing options...
nmano Posted July 30, 2017 Author Share Posted July 30, 2017 Unknown CPU Fixed About this Mac unknown cpu error fixed. Thius patched worked Haswell-E CPU and Broadwell CPU 1-Enable in config xcpm_bootstrap_Broadwell or Haswell 2-Enable in config xcpm_cpuid_set_infoBroadwell or Haswell 3-FakeCPUID is Broadwell 0x040674 4.CPU Type is Broadwell 0x0a02 5-FakeCPUID is Haswell 0x0306F2 6.CPU Type is Haswell 0x0a01 XCPM Brodwell and Haswell.zip 2 Link to comment Share on other sites More sharing options...
Tito95 Posted July 31, 2017 Share Posted July 31, 2017 Guys: Really will appreciate help on my Build. After 4 days fighting to Install sierra on my Mackintosh I found this post. My system is currently running "El Capitan" with and old GT Nvidia card from a MacPro 1.1. I have a brand new EVGA GeForce1050 Ti that I am trying to add to the system that require Sierra at the minimum. So far I tried all kind if Guidelines and could not get the USB installer pas the initial stage (Apple Logo Freeze) or Continuous reboot loop. My Hardware is as follow: I have the following hardware: ASRock X99E-itx/ac using a Intel 6800K RAM Corsair 16 GB * 2 Sticks (revenge led 32GB total) SSD Samsung 266 NVE Install EVGA GeForce 1050 Ti 4 GB Custom Water cooling system After all recommended settings in BIOS, I tried boot, but unfortunately without success. What's wrong? Could you please help me with right setup and just desperate? Thanks! I am attaching My IoReg and also my 2 EFI Folders (HD El Capital and USB Sierra) Eltito51.zip Link to comment Share on other sites More sharing options...
geeti Posted July 31, 2017 Share Posted July 31, 2017 Hi nmano, Is there any different with configuring Xeon E5 v4, on Sierra? I'm using a E5-2648L v4, with the configs from your guide, but it seems the CPU power management is not engaged. Although in ioreg, the pm are loaded, but the CPU freq/power stay at max. The AppleIntelInfo shows only one p-state(max). Thanks! Unknown CPU Fixed About this Mac unknown cpu error fixed. Thius patched worked Haswell-E CPU and Broadwell CPU 1-Enable in config xcpm_bootstrap_Broadwell or Haswell 2-Enable in config xcpm_cpuid_set_infoBroadwell or Haswell 3-FakeCPUID is Broadwell 0x040674 4.CPU Type is Broadwell 0x0a02 5-FakeCPUID is Haswell 0x0306F2 6.CPU Type is Haswell 0x0a01 XCPM Brodwell and Haswell.zip 1 Link to comment Share on other sites More sharing options...
geeti Posted July 31, 2017 Share Posted July 31, 2017 Updated the original post. It's on Sierra. Will look at this thread. Thanks Hi take a look to this thread (it is xeon V4 related) http://www.insanelymac.com/forum/topic/316516-macos-sierra-on-broadwell-eep-not-a-guide-but-maybe-a-working-in-progress/page-1 you have also specify whic osx version you are using Link to comment Share on other sites More sharing options...
geeti Posted August 1, 2017 Share Posted August 1, 2017 I was using the configs you provided for 12.6, but still got machdep.xcpm.mode: 0. Does the SSDT matter? Because ssdtprgen.sh does not support my CPU, I added those value manually to generate this ssdt. Also, I saw the long thread you had with pikeralpha on github. You also had the xcpm.mode=0 with your 2699. Did you figure it out in the end? Hi take a look to this thread (it is xeon V4 related) http://www.insanelymac.com/forum/topic/316516-macos-sierra-on-broadwell-eep-not-a-guide-but-maybe-a-working-in-progress/page-1 you have also specify whic osx version you are using Link to comment Share on other sites More sharing options...
geeti Posted August 1, 2017 Share Posted August 1, 2017 Still not... Could you enlighten me how you would do? Thanks! YesTry to use frequencyvector script from pikeralpha githubYou can use 14.1 or 17.1 frequency vectorThen you will have xcpm=1 Link to comment Share on other sites More sharing options...
mfc88 Posted August 2, 2017 Share Posted August 2, 2017 Guys: Really will appreciate help on my Build. After 4 days fighting to Install sierra on my Mackintosh I found this post. My system is currently running "El Capitan" with and old GT Nvidia card from a MacPro 1.1. I have a brand new EVGA GeForce1050 Ti that I am trying to add to the system that require Sierra at the minimum. So far I tried all kind if Guidelines and could not get the USB installer pas the initial stage (Apple Logo Freeze) or Continuous reboot loop. My Hardware is as follow: I have the following hardware: ASRock X99E-itx/ac using a Intel 6800K RAM Corsair 16 GB * 2 Sticks (revenge led 32GB total) SSD Samsung 266 NVE Install EVGA GeForce 1050 Ti 4 GB Custom Water cooling system After all recommended settings in BIOS, I tried boot, but unfortunately without success. What's wrong? Could you please help me with right setup and just desperate? Thanks! I am attaching My IoReg and also my 2 EFI Folders (HD El Capital and USB Sierra) Sorry bud, but my knowledge of this OS stops at 10.12.3. I'm no longer using it due to its overall instability. I suggest that if you're not going to use or plan on using Mac OS specific software, and you don't want Windows, then look into Linux. It's what I've been running for several months now and it's been perfect my needs. If you are going to use Mac OS software, then either stick with El Capitan or else you'll be on your own and expect months of learning, understanding, researching and tinkering to get Sierra to work (no guarantees of stability). This community is a great place for learning/sharing if you do decide to try Sierra; but, if that sounds like too much work, then look into a VMware solution (it'll be stable, but expect slower performance due to hardware/software limitations). Link to comment Share on other sites More sharing options...
Fergarth Posted August 3, 2017 Share Posted August 3, 2017 Hi Fabio. I apologize for not being the most suitable place for this subject. But can you once again help me with the new bios... already tried as you said, but it does not work for me!Thank you! X99-PRO-USB31-ASUS-3701.zip Link to comment Share on other sites More sharing options...
Fergarth Posted August 3, 2017 Share Posted August 3, 2017 No problem here Hi have included also UEFIpatch and txt used to do it Thank you friend! I'm finishing a backup and then I'll test! ? Link to comment Share on other sites More sharing options...
nmano Posted August 4, 2017 Author Share Posted August 4, 2017 I edit freqVectors 3400 to 4300 X86PlatformPlugin.kext/Contents/Resources/ Replace: /System/Library/Extensions/IOPlatformPluginFamily.kext/Contents/PlugIns//Resources The target plist (example: Mac-F60DEB81FF30ACF6.plist for the MacPro6,1) is selected based on the used board-id. Try Pike R. Alpha /freqVectorsEdit.sh then replace this file. Thanks pike. Mac-F60DEB81FF30ACF6.plist.zip 3 Link to comment Share on other sites More sharing options...
nmano Posted August 5, 2017 Author Share Posted August 5, 2017 Could you explain better what this modify plist can do? This below I mean... Thank you <key>Frequencies</key> <dict> <key>3400</key> <integer>0</integer> <key>3500</key> <integer>1</integer> <key>3600</key> <integer>2</integer> <key>3800</key> <integer>3</integer> <key>3900</key> <integer>4</integer> <key>4100</key> <integer>5</integer> <key>4300</key> <integer>6</integer> </dict> Apple FrequencyVectors only supported Frequencies High is 4100 Still they don’t support FrequencyVectors 4300 My system I overclock to 4300 Thats why we need edit. 2 Link to comment Share on other sites More sharing options...
nmano Posted August 5, 2017 Author Share Posted August 5, 2017 10.12.6 miner update XCPM for MSR_POWER_CTL OLD FC010000 DC330000 00000000 00000000 00001000 00000000 1A000400 NEW FC010000 DC330000 00000000 00000000 00000000 00000000 1A000400 If C1E-Disabled Find FC010000 DC330000 00000000 00000000 00000000 00000000 1A000400 Replace FC010000 DC330000 00000000 00000000 00000000 00000000 59000421 2 Link to comment Share on other sites More sharing options...
geeti Posted August 6, 2017 Share Posted August 6, 2017 Thanks for your help! I meant I did the frequencyvectors script, replacing macpro6,1 with imac17,1 or imac14,1. But same result... no xcpm... I started to thinking what did I do wrong with my installation. I've been using hackintosh for 5 years and installed over 5 machines. This is the first server system I've been using. The motherboard is C612(Supermicro x10sra), with a Intel Xeon E5-2648L v4. Is this similar to your system? If you have time, could you please take a look at my clover configs? There are multiple config, but the one I'm using is config_test.plist. Please note I disabled all the kerneltopatch except "xpcm performance fix 1".(I've tried enabled all those patches). Also attached the appleintelinfo output. Even I updated the freqVector(tried different models), I still got this from kernel log: 2017-08-05 23:20:44.675184-0400 0x822 Default 0x0 0 kernel: (IOPlatformPluginFamily) X86PlatformShim::sendPStates - Success! 2017-08-05 23:20:44.675466-0400 0x822 Default 0x0 0 kernel: (IOPlatformPluginFamily) X86PlatformShim::sendPStates - Success! 2017-08-05 23:20:44.675468-0400 0x822 Default 0x0 0 kernel: (IOPlatformPluginFamily) X86PlatformShim::sendPStates - Success! 2017-08-05 23:20:44.683935-0400 0x822 Default 0x0 0 kernel: (IOPlatformPluginFamily) X86PlatformShim::sendStepper - Stepper dictionary from plist is NULL! 2017-08-05 23:20:44.683938-0400 0x822 Default 0x0 0 kernel: (IOPlatformPluginFamily) X86PlatformShim::sendStepper - Stepper dictionary from plist is NULL! 2017-08-05 23:20:44.684205-0400 0x822 Default 0x0 0 kernel: (IOPlatformPluginFamily) X86PlatformShim::start - Failed to send stepper 2017-08-05 23:20:44.684207-0400 0x822 Default 0x0 0 kernel: (IOPlatformPluginFamily) X86PlatformShim::start - Failed to send stepper Find on pikeralpha github frequencyvevtors.sh scriptDownload itRun terminal window and drag & drop script on itFollow instructions and choose 14.1 or 17.1 in list you should see as optionTill process end you have to rebootNow you should have xcpm=1 if you do not have other problem in your sierra installationLinkhttps://github.com/Piker-Alpha/freqVectorsEdit.sh Please forgive my dumb questions.. how to tell c1e-disabled? 10.12.6 miner update XCPM for MSR_POWER_CTL OLD FC010000 DC330000 00000000 00000000 00001000 00000000 1A000400 NEW FC010000 DC330000 00000000 00000000 00000000 00000000 1A000400 If C1E-Disabled Find FC010000 DC330000 00000000 00000000 00000000 00000000 1A000400 Replace FC010000 DC330000 00000000 00000000 00000000 00000000 59000421 CLOVER.zip appleintelinfo.rtf Link to comment Share on other sites More sharing options...
geeti Posted August 7, 2017 Share Posted August 7, 2017 Hi Fabiosum, Unfortunately the config you provided didn't work out either.. thanks anyway! I was thinking about SSDT and freqvectors. After running the freqVectorsEdit.sh, I noticed the Mac-[boardid].plist don't have the stepcontextdict any more. But according to some google search, piker said sending stepper requires the stepcontextdict. However, from the update log of freqVectorsEdit, I found Piker intentionally removed the stepcontextdict since one version... I'm just confused.. The second thing is, the ssdtPrGen doesn't support my CPU(e5-2648L v4). I added the parameter in "user defined.cfg". Will this generate a functional ssdt? Hi geeti, In my opinion you are doing something wrong first of all try to have only one config.plist in your clover folder and named config.plist In my and others users testing many configs there could create some problems Then try to run from terminal this command and put here its output: kextstat I try to attach a clover folder for you bu I don't know well all your system config , you should add it in your signature to help people helping With some clover version if I had multiple config in clover folder I had strange mixing data config beahviour Your system could not start only with performance fix as the only kernel patch Then you have to verify if you have installed nullcpupm kext in your installation (I don't know how you did it) and other things If you have a solid backup you can try clover folder I attached here in few minutes from now! Maybe you have an AMD gfx so I have not touched some parts I have also deleted fakecpuid that it is not needed if you have some kernel patches set in your config verify if you have nullcpuPM kext installed in S/L/E or in L/E if you have, delete it and rebuild cache/permissions with kext utility Link to comment Share on other sites More sharing options...
nmano Posted August 7, 2017 Author Share Posted August 7, 2017 Hi Sygey02 Your DSDT its ready now test and report. Gigabyte X99 Ultra Gaming -CF Gigabyte X99 Ultra Gaming -CF.zip 1 Link to comment Share on other sites More sharing options...
Sygey02 Posted August 7, 2017 Share Posted August 7, 2017 Hi Sygey02 Your DSDT its ready now test and report. Gigabyte X99 Ultra Gaming -CF Hi nmano! tank you! I well test and reply back! 1 Link to comment Share on other sites More sharing options...
nmano Posted August 7, 2017 Author Share Posted August 7, 2017 Thanks for your help! I meant I did the frequencyvectors script, replacing macpro6,1 with imac17,1 or imac14,1. But same result... no xcpm... I started to thinking what did I do wrong with my installation. I've been using hackintosh for 5 years and installed over 5 machines. This is the first server system I've been using. The motherboard is C612(Supermicro x10sra), with a Intel Xeon E5-2648L v4. Is this similar to your system? If you have time, could you please take a look at my clover configs? There are multiple config, but the one I'm using is config_test.plist. Please note I disabled all the kerneltopatch except "xpcm performance fix 1".(I've tried enabled all those patches). Also attached the appleintelinfo output. Even I updated the freqVector(tried different models), I still got this from kernel log: 2017-08-05 23:20:44.675184-0400 0x822 Default 0x0 0 kernel: (IOPlatformPluginFamily) X86PlatformShim::sendPStates - Success! 2017-08-05 23:20:44.675466-0400 0x822 Default 0x0 0 kernel: (IOPlatformPluginFamily) X86PlatformShim::sendPStates - Success! 2017-08-05 23:20:44.675468-0400 0x822 Default 0x0 0 kernel: (IOPlatformPluginFamily) X86PlatformShim::sendPStates - Success! 2017-08-05 23:20:44.683935-0400 0x822 Default 0x0 0 kernel: (IOPlatformPluginFamily) X86PlatformShim::sendStepper - Stepper dictionary from plist is NULL! 2017-08-05 23:20:44.683938-0400 0x822 Default 0x0 0 kernel: (IOPlatformPluginFamily) X86PlatformShim::sendStepper - Stepper dictionary from plist is NULL! 2017-08-05 23:20:44.684205-0400 0x822 Default 0x0 0 kernel: (IOPlatformPluginFamily) X86PlatformShim::start - Failed to send stepper 2017-08-05 23:20:44.684207-0400 0x822 Default 0x0 0 kernel: (IOPlatformPluginFamily) X86PlatformShim::start - Failed to send stepper Please forgive my dumb questions.. how to tell c1e-disabled? 10.12.6 Just change your Frequencies in IOPlatformPowerProfile I have 4300 test and report. 10.12.6.zip Link to comment Share on other sites More sharing options...
nmano Posted August 8, 2017 Author Share Posted August 8, 2017 Unfortunately it gives me this error .. and reboots! I wel try some other settings in plist! test with X99_Injector USB 3.kext remove if any dsdt patches in config.plist have. X99_Injector USB 3.kext.zip 1 Link to comment Share on other sites More sharing options...
Recommended Posts