k1n4 Posted June 5, 2017 Share Posted June 5, 2017 Extract withe this app https://www.charlessoft.comYou're right Matthew, I don't think so... usually, HWSensor publish .pkg and binaries too.I'll extract the binaries with pacifist, thanks a lot again. Greetings Inviato dal mio iPhone utilizzando Tapatalk Link to comment Share on other sites More sharing options...
Regi Yassin Posted June 6, 2017 Share Posted June 6, 2017 Regi i've the same MOBO, and the same problem with FakeSMC Sensors... they cause random kernel panic on startup "kernel backtrace hang on boot..." I'll setup soon ssdt's like you but i've very little time for it. Could someone help for this? Thanks a lot i am currently having fakesmc slice version. with only cpu monitor, u want my patched folder? my current problem is with or without voodootsc, still get unsync tsc for cpu bla bla bla. (only after wake from sleep) can someone tell me how to get rid of it? Link to comment Share on other sites More sharing options...
MICKHAEL Posted June 6, 2017 Share Posted June 6, 2017 i am currently having fakesmc slice version. with only cpu monitor, u want my patched folder? my current problem is with or without voodootsc, still get unsync tsc for cpu bla bla bla. (only after wake from sleep) can someone tell me how to get rid of it? try - sudo pmset -a hibernatemode 3 Link to comment Share on other sites More sharing options...
Regi Yassin Posted June 6, 2017 Share Posted June 6, 2017 try - sudo pmset -a hibernatemode 3 should powernap checked ? what should i put for darkwake value? i can sleep without darkwake bootargs, tested darkwake=0,1,8. all my pc can sleep and wake, only the tsc problem edit: still getting those errors with hibernate 3. only with TSC_sync_margin=0 i can get rid of those errors after wake from sleep. (with or without voodootsc the output is the same, tried in s/l/e, l/e, clover kext inject, all same) 2017-06-06 19:44:52.712178+0700 0x73 Default 0x0 0 kernel: Unsynchronized TSC for cpu 2: 0x00000005091ae126, delta 0x4bb0e10fe 2017-06-06 19:44:52.714900+0700 0x73 Default 0x0 0 kernel: Unsynchronized TSC for cpu 4: 0x0000000509a3d1a3, delta 0x4bb0e1143 2017-06-06 19:44:52.717621+0700 0x73 Default 0x0 0 kernel: Unsynchronized TSC for cpu 6: 0x000000050a2d0af2, delta 0x4bb0e110a 2017-06-06 19:44:52.720396+0700 0x73 Default 0x0 0 kernel: Unsynchronized TSC for cpu 8: 0x000000050ab8adc6, delta 0x4bb0e1101 2017-06-06 19:44:52.723018+0700 0x73 Default 0x0 0 kernel: Unsynchronized TSC for cpu 10: 0x000000050b3cd6f7, delta 0x4bb0e10dd 2017-06-06 19:44:52.724434+0700 0x73 Default 0x0 0 kernel: Unsynchronized TSC for cpu 1: 0x000000050b83e69a, delta 0x4bb0e109b 2017-06-06 19:44:52.725756+0700 0x73 Default 0x0 0 kernel: Unsynchronized TSC for cpu 3: 0x000000050bc67ff4, delta 0x4bb0e1131 2017-06-06 19:44:52.727075+0700 0x73 Default 0x0 0 kernel: Unsynchronized TSC for cpu 5: 0x000000050c090748, delta 0x4bb0e1125 2017-06-06 19:44:52.728393+0700 0x73 Default 0x0 0 kernel: Unsynchronized TSC for cpu 7: 0x000000050c4b67ea, delta 0x4bb0e1131 2017-06-06 19:44:52.729812+0700 0x73 Default 0x0 0 kernel: Unsynchronized TSC for cpu 9: 0x000000050c92d7e4, delta 0x4bb0e112b 2017-06-06 19:44:52.731131+0700 0x73 Default 0x0 0 kernel: Unsynchronized TSC for cpu 11: 0x000000050cd54726, delta 0x4bb0e1140 2017-06-06 19:45:15.157555+0700 0x1474 Default 0x0 0 kernel: (kernel) Current tsc from rdtsc64() is 21692093394. Rendezvouing.. Link to comment Share on other sites More sharing options...
MICKHAEL Posted June 6, 2017 Share Posted June 6, 2017 should powernap checked ? what should i put for darkwake value? i can sleep without darkwake bootargs, tested darkwake=0,1,8. all my pc can sleep and wake, only the tsc problem edit: still getting those errors with hibernate 3. only with TSC_sync_margin=0 i can get rid of those errors after wake from sleep. (with or without voodootsc the output is the same, tried in s/l/e, l/e, clover kext inject, all same) 2017-06-06 19:44:52.712178+0700 0x73 Default 0x0 0 kernel: Unsynchronized TSC for cpu 2: 0x00000005091ae126, delta 0x4bb0e10fe 2017-06-06 19:44:52.714900+0700 0x73 Default 0x0 0 kernel: Unsynchronized TSC for cpu 4: 0x0000000509a3d1a3, delta 0x4bb0e1143 2017-06-06 19:44:52.717621+0700 0x73 Default 0x0 0 kernel: Unsynchronized TSC for cpu 6: 0x000000050a2d0af2, delta 0x4bb0e110a 2017-06-06 19:44:52.720396+0700 0x73 Default 0x0 0 kernel: Unsynchronized TSC for cpu 8: 0x000000050ab8adc6, delta 0x4bb0e1101 2017-06-06 19:44:52.723018+0700 0x73 Default 0x0 0 kernel: Unsynchronized TSC for cpu 10: 0x000000050b3cd6f7, delta 0x4bb0e10dd 2017-06-06 19:44:52.724434+0700 0x73 Default 0x0 0 kernel: Unsynchronized TSC for cpu 1: 0x000000050b83e69a, delta 0x4bb0e109b 2017-06-06 19:44:52.725756+0700 0x73 Default 0x0 0 kernel: Unsynchronized TSC for cpu 3: 0x000000050bc67ff4, delta 0x4bb0e1131 2017-06-06 19:44:52.727075+0700 0x73 Default 0x0 0 kernel: Unsynchronized TSC for cpu 5: 0x000000050c090748, delta 0x4bb0e1125 2017-06-06 19:44:52.728393+0700 0x73 Default 0x0 0 kernel: Unsynchronized TSC for cpu 7: 0x000000050c4b67ea, delta 0x4bb0e1131 2017-06-06 19:44:52.729812+0700 0x73 Default 0x0 0 kernel: Unsynchronized TSC for cpu 9: 0x000000050c92d7e4, delta 0x4bb0e112b 2017-06-06 19:44:52.731131+0700 0x73 Default 0x0 0 kernel: Unsynchronized TSC for cpu 11: 0x000000050cd54726, delta 0x4bb0e1140 2017-06-06 19:45:15.157555+0700 0x1474 Default 0x0 0 kernel: (kernel) Current tsc from rdtsc64() is 21692093394. Rendezvouing.. Powernap off, darkwake 8. All ok on my x99 system 1 Link to comment Share on other sites More sharing options...
k1n4 Posted June 6, 2017 Share Posted June 6, 2017 i am currently having fakesmc slice version. with only cpu monitor, u want my patched folder? my current problem is with or without voodootsc, still get unsync tsc for cpu bla bla bla. (only after wake from sleep) can someone tell me how to get rid of it? Ok Regi, post your entire clover folder. I want to compare your settings with mine... thanks a lot Inviato dal mio iPhone utilizzando Tapatalk Link to comment Share on other sites More sharing options...
Regi Yassin Posted June 6, 2017 Share Posted June 6, 2017 Powernap off, darkwake 8. All ok on my x99 system ok will try soon can u give me your clover config? are you using ssdt or dsdt method? perhaps i could have your clover folder? Ok Regi, post your entire clover folder. I want to compare your settings with mine... thanks a lot Inviato dal mio iPhone utilizzando Tapatalk here it is (right now im using BIOS 3701 patched E2) CLOVER.zip 1 Link to comment Share on other sites More sharing options...
k1n4 Posted June 6, 2017 Share Posted June 6, 2017 ok will try soon can u give me your clover config? are you using ssdt or dsdt method? perhaps i could have your clover folder? here it is (right now im using BIOS 3701 patched E2) Thanks a lot Regi... give me a feedback... I've BIOS 3402 Patched to unlock MSRSx02; i have patched from usb flash port. The latest BIOS 3701 is more stable? Do you have .CAP patched file v.3701 and could you post it too? Thanks again Inviato dal mio iPad utilizzando Tapatalk Link to comment Share on other sites More sharing options...
Regi Yassin Posted June 6, 2017 Share Posted June 6, 2017 Thanks a lot Regi... give me a feedback... I've BIOS 3402 Patched to unlock MSRSx02; i have patched from usb flash port. The latest BIOS 3701 is more stable? Do you have .CAP patched file v.3701 and could you post it too? Thanks again Inviato dal mio iPad utilizzando Tapatalk just patch it using uefipatch 0.3.9 Link to comment Share on other sites More sharing options...
MaLd0n Posted June 6, 2017 Share Posted June 6, 2017 With SSDTs u dont have a essential patches! Back in time and read about essential patches to avoid conflicts, SATA, USB, AUDIO, FIREWIRE, THUNDERBOLT, etc, etc Ur hack work good without ur SSDTs, its a generic Link to comment Share on other sites More sharing options...
Regi Yassin Posted June 6, 2017 Share Posted June 6, 2017 With SSDTs u dont have a essential patches! Back in time and read about essential patches to avoid conflicts, SATA, USB, AUDIO, FIREWIRE, THUNDERBOLT, etc, etc Ur hack work good without ur SSDTs, its a generic u talking about me or k1n4? if it was me, i just checking system stability without dsdt, only ssdt's. mald0n, can i ask a question? if so, what is voodootsc do? why is it (voodootsc) helping people with wake issue even booting without it just fine? 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted June 6, 2017 Share Posted June 6, 2017 i think the Pike patches solve it, i use 3 patches in config.plist i dont know about Asus, but GIgabyte is fine, no problem about it Same performance in High Sierra with same patches, but have log errors Link to comment Share on other sites More sharing options...
Regi Yassin Posted June 6, 2017 Share Posted June 6, 2017 i think the Pike patches solve it, i use 3 patches in config.plist i dont know about Asus, but GIgabyte is fine, no problem about it Same performance in High Sierra with same patches, but have log errors Captura de Tela 2017-06-06 às 15.56.31.png what patches did u use? can you share those 3 ? 83c3c483 fb22 be070000 0031d2e8 94fcffff or Reboot fix? is the 3rd wrmsr performance fix? i almost tried every combination of pike patches, 1 Link to comment Share on other sites More sharing options...
k1n4 Posted June 6, 2017 Share Posted June 6, 2017 i think the Pike patches solve it, i use 3 patches in config.plist i dont know about Asus, but GIgabyte is fine, no problem about it Same performance in High Sierra with same patches, but have log errors Captura de Tela 2017-06-06 às 15.56.31.png Asus MoBo has MSR 0xe2 CFG locked, Gigabyte it's factory unlocked... it's better patching BIOS like Pike said in his blog Inviato dal mio iPhone utilizzando Tapatalk 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted June 6, 2017 Share Posted June 6, 2017 what patches did u use? can you share those 3 ? 83c3c483 fb22 be070000 0031d2e8 94fcffff or Reboot fix? is the 3rd wrmsr performance fix? i almost tried every combination of pike patches, config.plist.zip Link to comment Share on other sites More sharing options...
Regi Yassin Posted June 6, 2017 Share Posted June 6, 2017 Asus MoBo has MSR 0xe2 CFG locked, Gigabyte it's factory unlocked... it's better patching BIOS like Pike said in his blog Inviato dal mio iPhone utilizzando Tapatalk i've read something here, is it different patch from locked e2? Link to comment Share on other sites More sharing options...
MaLd0n Posted June 6, 2017 Share Posted June 6, 2017 Asus MoBo has MSR 0xe2 CFG locked, Gigabyte it's factory unlocked... it's better patching BIOS like Pike said in his blog Inviato dal mio iPhone utilizzando Tapatalk bios patched don't solve it? Link to comment Share on other sites More sharing options...
k1n4 Posted June 6, 2017 Share Posted June 6, 2017 i've read something here, is it different patch from locked e2? The patch e2 that you've post it's the same... uefi patch, patched values for unlock MSR 0xe2 on Asus mobo. Inviato dal mio iPad utilizzando Tapatalk Link to comment Share on other sites More sharing options...
Regi Yassin Posted June 6, 2017 Share Posted June 6, 2017 bios patched don't solve it? my bios is patched with latest patches.txt, still getting unsync tsc errors Link to comment Share on other sites More sharing options...
Dmitry R Posted June 7, 2017 Share Posted June 7, 2017 HI guys, I'm trying to make xcpm or any kind of speedstep work on 10.12.5 running on MSI x99a with xeon E5-2630L v3 and can't make it happen. On 10.11.6 speedstep works just fine with the same clover config. I tried all possible kernel patches, with and without generated ssdt by ssdtPRGen.sh, nothing helps. The speedstep just doesn't work. The output of AppleIntelinfo on 10.12.5 is this: bash-3.2# cat /tmp/AppleIntelInfo.dat AppleIntelInfo.kext v2.5 Copyright © 2012-2017 Pike R. Alpha. All rights reserved. Settings: ------------------------------------------ logMSRs..................................: 1 logIGPU..................................: 0 logCStates...............................: 1 logIPGStyle..............................: 1 InitialTSC...............................: 0x232eadfeb6e (134 MHz) MWAIT C-States...........................: 8480 Processor Brandstring....................: Genuine Intel(R) CPU @ 1.80GHz Processor Signature..................... : 0x306F1 ------------------------------------------ - Family............................... : 6 - Stepping............................. : 1 - Model................................ : 0x3F (63) Model Specific Registers (MSRs) ------------------------------------------ MSR_CORE_THREAD_COUNT............(0x35) : 0x0 ------------------------------------------ - Core Count........................... : 8 - Thread Count......................... : 16 MSR_PLATFORM_INFO................(0xCE) : 0x80C33FB811200 ------------------------------------------ - Maximum Non-Turbo Ratio.............. : 0x12 (1800 MHz) - Ratio Limit for Turbo Mode........... : 1 (programmable) - TDP Limit for Turbo Mode............. : 1 (programmable) - Low Power Mode Support............... : 1 (LPM supported) - Number of ConfigTDP Levels........... : 1 (additional TDP level(s) available) - Maximum Efficiency Ratio............. : 12 - Minimum Operating Ratio.............. : 8 MSR_PMG_CST_CONFIG_CONTROL.......(0xE2) : 0x8400 ------------------------------------------ - I/O MWAIT Redirection Enable......... : 1 (enabled, IO read of MSR(0xE4) mapped to MWAIT) - CFG Lock............................. : 1 (MSR locked until next reset) - C3 State Auto Demotion............... : 0 (disabled/unsupported) - C1 State Auto Demotion............... : 0 (disabled/unsupported) - C3 State Undemotion.................. : 0 (disabled/unsupported) - C1 State Undemotion.................. : 0 (disabled/unsupported) - Package C-State Auto Demotion........ : 0 (disabled/unsupported) - Package C-State Undemotion........... : 0 (disabled/unsupported) MSR_PMG_IO_CAPTURE_BASE..........(0xE4) : 0x10414 ------------------------------------------ - LVL_2 Base Address................... : 0x414 - C-state Range........................ : 1 (C6 is the max C-State to include) IA32_MPERF.......................(0xE7) : 0x1228F9D08AE IA32_APERF.......................(0xE8) : 0x122838E36CB MSR_FLEX_RATIO...................(0x194) : 0x0 ------------------------------------------ MSR_IA32_PERF_STATUS.............(0x198) : 0x195600001200 ------------------------------------------ - Current Performance State Value...... : 0x1200 (1800 MHz) MSR_IA32_PERF_CONTROL............(0x199) : 0x1200 ------------------------------------------ - Target performance State Value....... : 0x1200 (1800 MHz) - Intel Dynamic Acceleration........... : 0 (IDA engaged) IA32_CLOCK_MODULATION............(0x19A) : 0x0 IA32_THERM_INTERRUPT.............(0x19B) : 0x0 IA32_THERM_STATUS................(0x19C) : 0x88210000 ------------------------------------------ - Thermal Status....................... : 0 - Thermal Log.......................... : 0 - PROCHOT # or FORCEPR# event.......... : 0 - PROCHOT # or FORCEPR# log............ : 0 - Critical Temperature Status.......... : 0 - Critical Temperature log............. : 0 - Thermal Threshold #1 Status.......... : 0 - Thermal Threshold #1 log............. : 0 - Thermal Threshold #2 Status.......... : 0 - Thermal Threshold #2 log............. : 0 - Power Limitation Status.............. : 0 - Power Limitation log................. : 0 - Current Limit Status................. : 0 - Current Limit log.................... : 0 - Cross Domain Limit Status............ : 0 - Cross Domain Limit log............... : 0 - Digital Readout...................... : 33 - Resolution in Degrees Celsius........ : 1 - Reading Valid........................ : 1 (valid) MSR_THERM2_CTL...................(0x19D) : 0x0 IA32_MISC_ENABLES................(0x1A0) : 0x850089 ------------------------------------------ - Fast-Strings......................... : 1 (enabled) - FOPCODE compatibility mode Enable.... : 0 - Automatic Thermal Control Circuit.... : 1 (enabled) - Split-lock Disable................... : 0 - Performance Monitoring............... : 1 (available) - Bus Lock On Cache Line Splits Disable : 0 - Hardware prefetch Disable............ : 0 - Processor Event Based Sampling....... : 0 (PEBS supported) - GV1/2 legacy Enable.................. : 0 - Enhanced Intel SpeedStep Technology.. : 1 (enabled) - MONITOR FSM.......................... : 1 (MONITOR/MWAIT supported) - Adjacent sector prefetch Disable..... : 0 - CFG Lock............................. : 0 (MSR not locked) - xTPR Message Disable................. : 1 (disabled) MSR_TEMPERATURE_TARGET...........(0x1A2) : 0x5A0A00 ------------------------------------------ - Turbo Attenuation Units.............. : 0 - Temperature Target................... : 90 - TCC Activation Offset................ : 0 MSR_MISC_PWR_MGMT................(0x1AA) : 0x400000 ------------------------------------------ - EIST Hardware Coordination........... : 0 (hardware coordination enabled) - Energy/Performance Bias support...... : 1 - Energy/Performance Bias.............. : 0 (disabled/MSR not visible to software) - Thermal Interrupt Coordination Enable : 1 (thermal interrupt routed to all cores) MSR_TURBO_RATIO_LIMIT............(0x1AD) : 0x1414141516171819 ------------------------------------------ - Maximum Ratio Limit for C01.......... : 19 (2500 MHz) - Maximum Ratio Limit for C02.......... : 18 (2400 MHz) - Maximum Ratio Limit for C03.......... : 17 (2300 MHz) - Maximum Ratio Limit for C04.......... : 16 (2200 MHz) - Maximum Ratio Limit for C05.......... : 15 (2100 MHz) - Maximum Ratio Limit for C06.......... : 14 (2000 MHz) - Maximum Ratio Limit for C07.......... : 14 (2000 MHz) - Maximum Ratio Limit for C08.......... : 14 (2000 MHz) MSR_POWER_CTL....................(0x1FC) : 0x29000059 ------------------------------------------ - Bi-Directional Processor Hot..........: 1 (enabled) - C1E Enable............................: 0 (disabled) MSR_RAPL_POWER_UNIT..............(0x606) : 0xA0E03 ------------------------------------------ - Power Units.......................... : 3 (1/8 Watt) - Energy Status Units.................. : 14 (61 micro-Joules) - Time Units .......................... : 10 (976.6 micro-Seconds) MSR_PKG_POWER_LIMIT..............(0x610) : 0x782A0001D8230 ------------------------------------------ - Package Power Limit #1............... : 70 Watt - Enable Power Limit #1................ : 1 (enabled) - Package Clamping Limitation #1....... : 1 (allow going below OS-requested P/T state during Time Window for Power Limit #1) - Time Window for Power Limit #1....... : 14 (40960 milli-Seconds) - Package Power Limit #2............... : 84 Watt - Enable Power Limit #2................ : 1 (enabled) - Package Clamping Limitation #2....... : 1 (allow going below OS-requested P/T state setting Time Window for Power Limit #2) - Time Window for Power Limit #2....... : 3 (20 milli-Seconds) - Lock................................. : 0 (MSR not locked) MSR_PKG_ENERGY_STATUS............(0x611) : 0x19B00E05 ------------------------------------------ - Total Energy Consumed................ : 26304 Joules (Watt = Joules / seconds) MSR_CONFIG_TDP_NOMINAL...........(0x648) : 0x12 MSR_CONFIG_TDP_LEVEL1............(0x649) : 0xC40460000F0230 MSR_CONFIG_TDP_LEVEL2............(0x64a) : 0xC4046000000000 MSR_CONFIG_TDP_CONTROL...........(0x64b) : 0x0 MSR_TURBO_ACTIVATION_RATIO.......(0x64c) : 0x0 MSR_PKGC3_IRTL...................(0x60a) : 0x0 MSR_PKGC6_IRTL...................(0x60b) : 0x0 MSR_PKG_C2_RESIDENCY.............(0x60d) : 0x0 MSR_PKG_C3_RESIDENCY.............(0x3f8) : 0x0 MSR_PKG_C2_RESIDENCY.............(0x60d) : 0x0 MSR_PKG_C6_RESIDENCY.............(0x3f9) : 0x0 IA32_TSC_DEADLINE................(0x6E0) : 0x232EDCB50C2 CPU Ratio Info: ------------------------------------------ Base Clock Frequency (BLCK)............. : 100 MHz Maximum Efficiency Ratio/Frequency.......: 12 (1200 MHz) Maximum non-Turbo Ratio/Frequency........: 18 (1800 MHz) Maximum Turbo Ratio/Frequency............: 25 (2500 MHz) P-State ratio * 100 = Frequency in MHz ------------------------------------------ p.p1 {margin: 0.0px 0.0px 0.0px 0.0px; font: 11.0px Menlo; color: #000000; background-color: #ffffff} p.p2 {margin: 0.0px 0.0px 0.0px 0.0px; font: 11.0px Menlo; color: #000000; background-color: #ffffff; min-height: 13.0px} span.s1 {font-variant-ligatures: no-common-ligatures} CPU P-States [ (18) ] I also attached my clover config file, generated ssdt and ioreg file. How to fix this? Thank you. None can help? Link to comment Share on other sites More sharing options...
Dmitry R Posted June 11, 2017 Share Posted June 11, 2017 HI guys, I'm trying to make xcpm or any kind of speedstep work on 10.12.5 running on MSI x99a with xeon E5-2630L v3 and can't make it happen. On 10.11.6 speedstep works just fine with the same clover config. I tried all possible kernel patches, with and without generated ssdt by ssdtPRGen.sh, nothing helps. The speedstep just doesn't work. The output of AppleIntelinfo on 10.12.5 is this: bash-3.2# cat /tmp/AppleIntelInfo.dat AppleIntelInfo.kext v2.5 Copyright © 2012-2017 Pike R. Alpha. All rights reserved. Settings: ------------------------------------------ logMSRs..................................: 1 logIGPU..................................: 0 logCStates...............................: 1 logIPGStyle..............................: 1 InitialTSC...............................: 0x232eadfeb6e (134 MHz) MWAIT C-States...........................: 8480 Processor Brandstring....................: Genuine Intel(R) CPU @ 1.80GHz Processor Signature..................... : 0x306F1 ------------------------------------------ - Family............................... : 6 - Stepping............................. : 1 - Model................................ : 0x3F (63) Model Specific Registers (MSRs) ------------------------------------------ MSR_CORE_THREAD_COUNT............(0x35) : 0x0 ------------------------------------------ - Core Count........................... : 8 - Thread Count......................... : 16 MSR_PLATFORM_INFO................(0xCE) : 0x80C33FB811200 ------------------------------------------ - Maximum Non-Turbo Ratio.............. : 0x12 (1800 MHz) - Ratio Limit for Turbo Mode........... : 1 (programmable) - TDP Limit for Turbo Mode............. : 1 (programmable) - Low Power Mode Support............... : 1 (LPM supported) - Number of ConfigTDP Levels........... : 1 (additional TDP level(s) available) - Maximum Efficiency Ratio............. : 12 - Minimum Operating Ratio.............. : 8 MSR_PMG_CST_CONFIG_CONTROL.......(0xE2) : 0x8400 ------------------------------------------ - I/O MWAIT Redirection Enable......... : 1 (enabled, IO read of MSR(0xE4) mapped to MWAIT) - CFG Lock............................. : 1 (MSR locked until next reset) - C3 State Auto Demotion............... : 0 (disabled/unsupported) - C1 State Auto Demotion............... : 0 (disabled/unsupported) - C3 State Undemotion.................. : 0 (disabled/unsupported) - C1 State Undemotion.................. : 0 (disabled/unsupported) - Package C-State Auto Demotion........ : 0 (disabled/unsupported) - Package C-State Undemotion........... : 0 (disabled/unsupported) MSR_PMG_IO_CAPTURE_BASE..........(0xE4) : 0x10414 ------------------------------------------ - LVL_2 Base Address................... : 0x414 - C-state Range........................ : 1 (C6 is the max C-State to include) IA32_MPERF.......................(0xE7) : 0x1228F9D08AE IA32_APERF.......................(0xE8) : 0x122838E36CB MSR_FLEX_RATIO...................(0x194) : 0x0 ------------------------------------------ MSR_IA32_PERF_STATUS.............(0x198) : 0x195600001200 ------------------------------------------ - Current Performance State Value...... : 0x1200 (1800 MHz) MSR_IA32_PERF_CONTROL............(0x199) : 0x1200 ------------------------------------------ - Target performance State Value....... : 0x1200 (1800 MHz) - Intel Dynamic Acceleration........... : 0 (IDA engaged) IA32_CLOCK_MODULATION............(0x19A) : 0x0 IA32_THERM_INTERRUPT.............(0x19B) : 0x0 IA32_THERM_STATUS................(0x19C) : 0x88210000 ------------------------------------------ - Thermal Status....................... : 0 - Thermal Log.......................... : 0 - PROCHOT # or FORCEPR# event.......... : 0 - PROCHOT # or FORCEPR# log............ : 0 - Critical Temperature Status.......... : 0 - Critical Temperature log............. : 0 - Thermal Threshold #1 Status.......... : 0 - Thermal Threshold #1 log............. : 0 - Thermal Threshold #2 Status.......... : 0 - Thermal Threshold #2 log............. : 0 - Power Limitation Status.............. : 0 - Power Limitation log................. : 0 - Current Limit Status................. : 0 - Current Limit log.................... : 0 - Cross Domain Limit Status............ : 0 - Cross Domain Limit log............... : 0 - Digital Readout...................... : 33 - Resolution in Degrees Celsius........ : 1 - Reading Valid........................ : 1 (valid) MSR_THERM2_CTL...................(0x19D) : 0x0 IA32_MISC_ENABLES................(0x1A0) : 0x850089 ------------------------------------------ - Fast-Strings......................... : 1 (enabled) - FOPCODE compatibility mode Enable.... : 0 - Automatic Thermal Control Circuit.... : 1 (enabled) - Split-lock Disable................... : 0 - Performance Monitoring............... : 1 (available) - Bus Lock On Cache Line Splits Disable : 0 - Hardware prefetch Disable............ : 0 - Processor Event Based Sampling....... : 0 (PEBS supported) - GV1/2 legacy Enable.................. : 0 - Enhanced Intel SpeedStep Technology.. : 1 (enabled) - MONITOR FSM.......................... : 1 (MONITOR/MWAIT supported) - Adjacent sector prefetch Disable..... : 0 - CFG Lock............................. : 0 (MSR not locked) - xTPR Message Disable................. : 1 (disabled) MSR_TEMPERATURE_TARGET...........(0x1A2) : 0x5A0A00 ------------------------------------------ - Turbo Attenuation Units.............. : 0 - Temperature Target................... : 90 - TCC Activation Offset................ : 0 MSR_MISC_PWR_MGMT................(0x1AA) : 0x400000 ------------------------------------------ - EIST Hardware Coordination........... : 0 (hardware coordination enabled) - Energy/Performance Bias support...... : 1 - Energy/Performance Bias.............. : 0 (disabled/MSR not visible to software) - Thermal Interrupt Coordination Enable : 1 (thermal interrupt routed to all cores) MSR_TURBO_RATIO_LIMIT............(0x1AD) : 0x1414141516171819 ------------------------------------------ - Maximum Ratio Limit for C01.......... : 19 (2500 MHz) - Maximum Ratio Limit for C02.......... : 18 (2400 MHz) - Maximum Ratio Limit for C03.......... : 17 (2300 MHz) - Maximum Ratio Limit for C04.......... : 16 (2200 MHz) - Maximum Ratio Limit for C05.......... : 15 (2100 MHz) - Maximum Ratio Limit for C06.......... : 14 (2000 MHz) - Maximum Ratio Limit for C07.......... : 14 (2000 MHz) - Maximum Ratio Limit for C08.......... : 14 (2000 MHz) MSR_POWER_CTL....................(0x1FC) : 0x29000059 ------------------------------------------ - Bi-Directional Processor Hot..........: 1 (enabled) - C1E Enable............................: 0 (disabled) MSR_RAPL_POWER_UNIT..............(0x606) : 0xA0E03 ------------------------------------------ - Power Units.......................... : 3 (1/8 Watt) - Energy Status Units.................. : 14 (61 micro-Joules) - Time Units .......................... : 10 (976.6 micro-Seconds) MSR_PKG_POWER_LIMIT..............(0x610) : 0x782A0001D8230 ------------------------------------------ - Package Power Limit #1............... : 70 Watt - Enable Power Limit #1................ : 1 (enabled) - Package Clamping Limitation #1....... : 1 (allow going below OS-requested P/T state during Time Window for Power Limit #1) - Time Window for Power Limit #1....... : 14 (40960 milli-Seconds) - Package Power Limit #2............... : 84 Watt - Enable Power Limit #2................ : 1 (enabled) - Package Clamping Limitation #2....... : 1 (allow going below OS-requested P/T state setting Time Window for Power Limit #2) - Time Window for Power Limit #2....... : 3 (20 milli-Seconds) - Lock................................. : 0 (MSR not locked) MSR_PKG_ENERGY_STATUS............(0x611) : 0x19B00E05 ------------------------------------------ - Total Energy Consumed................ : 26304 Joules (Watt = Joules / seconds) MSR_CONFIG_TDP_NOMINAL...........(0x648) : 0x12 MSR_CONFIG_TDP_LEVEL1............(0x649) : 0xC40460000F0230 MSR_CONFIG_TDP_LEVEL2............(0x64a) : 0xC4046000000000 MSR_CONFIG_TDP_CONTROL...........(0x64b) : 0x0 MSR_TURBO_ACTIVATION_RATIO.......(0x64c) : 0x0 MSR_PKGC3_IRTL...................(0x60a) : 0x0 MSR_PKGC6_IRTL...................(0x60b) : 0x0 MSR_PKG_C2_RESIDENCY.............(0x60d) : 0x0 MSR_PKG_C3_RESIDENCY.............(0x3f8) : 0x0 MSR_PKG_C2_RESIDENCY.............(0x60d) : 0x0 MSR_PKG_C6_RESIDENCY.............(0x3f9) : 0x0 IA32_TSC_DEADLINE................(0x6E0) : 0x232EDCB50C2 CPU Ratio Info: ------------------------------------------ Base Clock Frequency (BLCK)............. : 100 MHz Maximum Efficiency Ratio/Frequency.......: 12 (1200 MHz) Maximum non-Turbo Ratio/Frequency........: 18 (1800 MHz) Maximum Turbo Ratio/Frequency............: 25 (2500 MHz) P-State ratio * 100 = Frequency in MHz ------------------------------------------ p.p1 {margin: 0.0px 0.0px 0.0px 0.0px; font: 11.0px Menlo; color: #000000; background-color: #ffffff} p.p2 {margin: 0.0px 0.0px 0.0px 0.0px; font: 11.0px Menlo; color: #000000; background-color: #ffffff; min-height: 13.0px} span.s1 {font-variant-ligatures: no-common-ligatures} CPU P-States [ (18) ] I also attached my clover config file, generated ssdt and ioreg file. How to fix this? Thank you. With attached clover config.plist xcpm speedstep works just fine on MSI x99a Krait + xeon e5-2630L v3 +10.12.5 config.plist.zip Link to comment Share on other sites More sharing options...
jacoweb Posted June 11, 2017 Share Posted June 11, 2017 Hey guys! I have a question about my onboard sound. I cant get it working. Followed several guids but no luck. Can someone look at my files? EFI files and ioreg dump inside the zip. efi.zip Link to comment Share on other sites More sharing options...
MaLd0n Posted June 11, 2017 Share Posted June 11, 2017 Hey guys! I have a question about my onboard sound. I cant get it working. Followed several guids but no luck. Can someone look at my files? EFI files and ioreg dump inside the zip. jacoweb.zip Link to comment Share on other sites More sharing options...
jacoweb Posted June 11, 2017 Share Posted June 11, 2017 jacoweb.zip hey there. Thank you. So do i need to replace the ACPI files and all the kexts? I got kernel panic because of the cpupowermanagement. Update: Works fine with NullCPUPowerManagement.kext. No i got sound. But how can i fix powermanagement? 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted June 11, 2017 Share Posted June 11, 2017 u need patches in config.plist, kernel to patch after apply it, remove null 1 Link to comment Share on other sites More sharing options...
Recommended Posts