Fljagd Posted October 29, 2016 Share Posted October 29, 2016 all my kexts are 10.12Nothing in S / L / E To operate the web driversit is desirable to use http://www.insanelymac.com/forum/files/file/424-agdpfix/ 1 Link to comment Share on other sites More sharing options...
giacomoleopardo Posted October 29, 2016 Share Posted October 29, 2016 maybe it´s the combination with my GTX 980Ti. I have 3 installations of Sierra, and it´s always the same. I can boot with AppleALC when i use InsanelyRepairPermission befor. This works fine, but when macOS changes something and rebuild caches it self, i can´t boot. Tested this with ONYX and delete & rebuild caches. System don´t boot. I have to use -alcoff and it boots fine. Now running InsanelyRepairPermission, and it boots again. I have no idea, with 10.11.6 i never had this problems. I had an issue with 10.12.1 and AppleALC too. On my ASRock Z170 Fatal1ty ITX (Realtek ALC1150) caused kernel panic every time I rebuilt kernel cache. Even after unistall it, the behavior never stopped. Tried a fresh install with no audio at all, and everithing is fine. Back to PikeRalpha/Toleda's method. Still not sure about AppleALC relation, though. Link to comment Share on other sites More sharing options...
SammlerG Posted October 29, 2016 Share Posted October 29, 2016 Tested a few minutes ago again with 10.12.1 and AppleALC. System hangs at boot. When i use -alcoff my system boots. So back to patched AppleHDA and it boots every time. I download a new 10.12.1 Sierra installer from App Store and make a complete fresh and clean install this weekend. And i hope i can boot with nv_disable=1 to installer and login. With EC i never had any issues or problems Link to comment Share on other sites More sharing options...
Fljagd Posted October 29, 2016 Share Posted October 29, 2016 Being curious, I again tested the patch ToledaEverything appears fine but no soundSo back to AppleACL Surprising For information, be aware that the majority of the patch in AppleACL.kext are Toleda look here AppleALC.kext/Contents/PlugIns/PinConfigs.kext/Contents/Info.plist Link to comment Share on other sites More sharing options...
SammlerG Posted October 29, 2016 Share Posted October 29, 2016 did you set AppleHDAController Find A08C -> 208D 10.10-10.11+x99-ALC-Onboard-Audio in clover? Link to comment Share on other sites More sharing options...
Fljagd Posted October 29, 2016 Share Posted October 29, 2016 did you set AppleHDAController Find A08C -> 208D 10.10-10.11+x99-ALC-Onboard-Audio in clover? yes only AppleHDAController Find A08C -> 208D Link to comment Share on other sites More sharing options...
SammlerG Posted October 29, 2016 Share Posted October 29, 2016 add AppleHDA 8A19D411 to 00000000 t1-10.12-AppleHDA/Realtek ALC... AppleHDA 8B19D411 to 0009EC10 t1-10.9-10.12-AppleHDA/Realtek ALC1150 AppleHDA 786D6C2E7A6C to 7A6D6C2E7A6C t1-AppleHDA/Resources/xml>zml 2 Link to comment Share on other sites More sharing options...
scarface9x Posted October 29, 2016 Share Posted October 29, 2016 Hi, Wow! What a strange plist for your system lol. As this had not seen any. Many unnecessary things. I'm on mobile phone now, but tomorrow I help you. Haha that happens when a noob has access to more edits and patches then needed. Thanks Link to comment Share on other sites More sharing options...
nmano Posted October 29, 2016 Author Share Posted October 29, 2016 Automatic Thermal Control Circuit-Enabled patch for Gigabyte board. I made this patch for If bios setting CPU Thermal Monitor-Enabled IA32_MISC_ENABLES................(0x1A0) : 0x850089 <dict> <key>Comment</key> <string>SammlerG Sierra xcpm MSR Patch 2 / xcpm support Pike R. Alpha/IA32_MISC_ENABLES(0x1A0)=0x850089/Enabled-N.Mano</string> <key>Disabled</key> <false/> <key>Find</key> <data> oAEAANwzAAAAAAAAAAAAAAAAAABAAAAAAQAF </data> <key>Replace</key> <data> oAEAANwzAAAAAAAAAAAAAAAAAABAAAAACQAF </data> </dict> config.plist.zip Link to comment Share on other sites More sharing options...
nmano Posted October 29, 2016 Author Share Posted October 29, 2016 Automatic Thermal Control Circuit-Enabled or Disabled or Auto patch. This patch full supported CPU Thermal monitor Enable or Disabled Or Auto setting in bios. Finally stop restart for gigabyte board. <dict> <key>Comment</key> <string>SammlerG Sierra xcpm MSR Patch 2 / xcpm support Pike R. Alpha/IA32_MISC_ENABLES(0x1A0)=0x850089/Enabled or Disabled or Auto N.Mano</string> <key>Disabled</key> <false/> <key>Find</key> <data> oAEAANwzAAAAAAAAAAAAAAAAAABAAAAAAQAFAAAAAAAA AAAAAAAAAAAAAAAAAAAAsAEAAJABAAA= </data> <key>Replace</key> <data> oAEAANwzAAAAAAAAAAAAAAAAAABAAAAACQAFAAAAAAAA AAAAAAAAAAAAAAAAAAAAsAEAAJABAAA= </data> </dict> config.plist.zip 1 Link to comment Share on other sites More sharing options...
Allan Posted October 29, 2016 Share Posted October 29, 2016 Hey @nmano, you have WiFi/Bluetooth working on this Hack? Thanks Link to comment Share on other sites More sharing options...
nmano Posted October 29, 2016 Author Share Posted October 29, 2016 Hey @nmano, you have WiFi/Bluetooth working on this Hack? Thanks Yes Its worked. Apple Bluetooth Software Version: 5.0.1f7 Hardware, Features, and Settings: Name: manoranjan’s Mac Pro Address: c4-8e-8f-fd-53-88 Bluetooth Low Energy Supported: Yes Handoff Supported: Yes Instant Hot Spot Supported: Yes Manufacturer: Broadcom Transport: USB Chipset: 20702A3 Firmware Version: v14 c4096 Bluetooth Power: On Discoverable: Off Connectable: Yes Auto Seek Pointing: On Remote wake: On Vendor ID: 0x0A5C Product ID: 0x216F HCI Version: 4.0 (0x6) HCI Revision: 0x1000 LMP Version: 4.0 (0x6) LMP Subversion: 0x220E Device Type (Major): Computer Device Type (Complete): Mac Desktop Composite Class Of Device: 0x380104 Device Class (Major): 0x01 Device Class (Minor): 0x01 Service Class: 0x1C0 Auto Seek Keyboard: On Devices (Paired, Configured, etc.): navaratnam’s Mac Pro: Address: 24-0A-64-03-AC-F6 Major Type: Miscellaneous Minor Type: Unknown Services: Paired: No Configured: Yes Connected: No Class of Device: 0x00 0x00 0x0000 c4-8e-8f-fd-53-88: Address: C4-8E-8F-FD-53-88 Major Type: Miscellaneous Minor Type: Unknown Services: Paired: Yes Configured: Yes Connected: No Class of Device: 0x00 0x00 0x0000 iPad: Address: 38-48-4C-AD-71-FD Major Type: Miscellaneous Minor Type: Unknown Services: Paired: No Configured: Yes Connected: No Class of Device: 0x00 0x00 0x0000 Services: Bluetooth File Transfer: Folder other devices can browse: ~/Public When receiving items: Accept all without warning State: Disabled Bluetooth File Exchange: Folder for accepted items: ~/Downloads When other items are accepted: Save to location When receiving items: Accept all without warning State: Disabled Bluetooth Internet Sharing: State: Disabled Incoming Serial Ports: Bluetooth-Incoming-Port: RFCOMM Channel: 3 Requires Authentication: No Software Versions: CoreWLAN: 11.0 (1200.25.1) CoreWLANKit: 12.0 (1200.25.1) Menu Extra: 12.0 (1200.37) System Information: 12.0 (1200.3) IO80211 Family: 12.0 (1200.12.2) Diagnostics: 7.0 (700.5) AirPort Utility: 6.3.7 (637.5) Interfaces: en2: Card Type: AirPort Extreme (0x14E4, 0x111) Firmware Version: Broadcom BCM43xx 1.0 (7.21.171.47.1a8) MAC Address: b8:09:8a:d7:c2:5d Locale: FCC Country Code: US Supported PHY Modes: 802.11 a/b/g/n/ac Supported Channels: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 144, 149, 153, 157, 161, 165 Wake On Wireless: Supported AirDrop: Supported AirDrop Channel: 149 Auto Unlock: Supported Status: Connected Current Network Information: Comwave-6C03: PHY Mode: 802.11n BSSID: 00:23:6a:eb:6c:05 Channel: 1 Country Code: US Network Type: Infrastructure Security: WPA2 Personal Signal / Noise: -81 dBm / -83 dBm Transmit Rate: 20 MCS Index: 2 Other Local Wi-Fi Networks: Rogers: PHY Mode: 802.11n BSSID: 1c:ab:c0:0d:98:c8 Channel: 6 Country Code: US Network Type: Infrastructure Security: WPA/WPA2 Personal Signal / Noise: -75 dBm / 0 dBm Rogers-5G: PHY Mode: 802.11n BSSID: 1e:ab:c0:0d:98:c0 Channel: 149 Country Code: US Network Type: Infrastructure Security: WPA/WPA2 Personal Signal / Noise: -86 dBm / 0 dBm 2 Link to comment Share on other sites More sharing options...
Fergarth Posted October 29, 2016 Share Posted October 29, 2016 Hello, I'm close to a fully working build but i can not get my usb 3 to work, and i'm guessing that's causing also my no sleep/turn off issues as well as it just keeps rebooting. I'm using DSDT from nmano which solved a ton of issues for me, audio works with voodooHDA, wifi+bluetooth works OOB with apple airport card. Attached is my config.plist maybe someone with better knowledge will find what is missing. Thanks I relied on my ASUS UEFI, search in your Gigabyte for these settings. Enter your board UEFI Bios and press F5 to load default values and OK. Press F7 In Advanced: USB Configuration and set: Intel XHCI Mode - Smart Auto XHCI Legacy Support - Enable EHCI Legacy Support - Enable XHCI Hand-off - Enable EHCI Hand-off - Enable In Ai Tweaker: Internal CPU Power Management (EIST) - Disable In Boot / Secure Boot: Os Type - Other OS Press F10 to Save and Exit Try using these Drivers, Kexts and plist attached. Generate a serial number for plist (this one don´t have) Remove other older kexts that you use for USB in Clover EFI or S/L/E. Reboot and the USB 2, 3 and 3.1 should work. Good luck Anexo.zip Link to comment Share on other sites More sharing options...
Fljagd Posted October 30, 2016 Share Posted October 30, 2016 add AppleHDA 8A19D411 to 00000000 t1-10.12-AppleHDA/Realtek ALC... AppleHDA 8B19D411 to 0009EC10 t1-10.9-10.12-AppleHDA/Realtek ALC1150 AppleHDA 786D6C2E7A6C to 7A6D6C2E7A6C t1-AppleHDA/Resources/xml>zml Thank a lot config.plist.zip 1 Link to comment Share on other sites More sharing options...
nmano Posted October 30, 2016 Author Share Posted October 30, 2016 I add 2 more patches. IF you Disable C1E in bios <dict> <key>Comment</key> <string>N.Mano / xcpm support Pike R. Alpha/MSR_POWER_CTL/0x1FC/0x21040059/If C1E-Disabled</string> <key>Disabled</key> <false/> <key>Find</key> <data> /AEAANwzAAAAAAAAAAAAAAAAEAAAAAAAGgAEAA== </data> <key>Replace</key> <data> /AEAANwzAAAAAAAAAAAAAAAAAAAAAAAAWQAEIQ== </data> </dict> IF you Enable C1E in bios <dict> <key>Comment</key> <string>N.Mano / xcpm support Pike R. Alpha/MSR_POWER_CTL/0x1FC/If C1E-Enabled</string> <key>Disabled</key> <false/> <key>Find</key> <data> /AEAANwzAAAAAAAAAAAAAAAAEAAAAAAAGgAEAA== </data> <key>Replace</key> <data> /AEAANwzAAAAAAAAAAAAAAAAEAAAAAAAWwAEAA== </data> </dict> 1 Link to comment Share on other sites More sharing options...
nmano Posted October 30, 2016 Author Share Posted October 30, 2016 I am happy with XCPM. My config and bios setting XMP: profile 1 C1E: Disabled C6/C7: Enable CPU Thermal Monitor: Enabled C3: Enable EIST: Disable CPU Thermal Monitor: Enable IA32_MISC_ENABLES................(0x1A0) : 0x850089 MSR_POWER_CTL....................(0x1FC) : 0x21040059 ------------------------------------------ - C1E Enable............................: 0 (disabled) Last login: Sun Oct 30 14:51:42 on console manoranjans-Pro:~ manoranjan$ sudo chown -R root:wheel /Users/manoranjan/Desktop/AppleIntelInfo.kext Password: manoranjans-Pro:~ manoranjan$ sudo chmod -R 755 /Users/manoranjan/Desktop/AppleIntelInfo.kext manoranjans-Pro:~ manoranjan$ sudo kextload /Users/manoranjan/Desktop/AppleIntelInfo.kext manoranjans-Pro:~ manoranjan$ sudo cat /tmp/AppleIntelInfo.dat AppleIntelInfo.kext v1.8e Copyright © 2012-2016 Pike R. Alpha. All rights reserved Settings: ------------------------------------------ logMSRs..................................: 1 logIGPU..................................: 0 logCStates...............................: 1 logIPGStyle..............................: 1 InitialTSC...............................: 0x73480feda9e (264 MHz) MWAIT C-States...........................: 8480 Processor Brandstring....................: Intel(R) Core(TM) i7-5960X CPU @ 3.00GHz Processor Signature..................... : 0x306F2 ------------------------------------------ - Family............................... : 6 - Stepping............................. : 2 - Model................................ : 0x3F (63) Model Specific Registers (MSRs) ------------------------------------------ MSR_CORE_THREAD_COUNT............(0x35) : 0xFFFFFF805CDC6B00 ------------------------------------------ - Core Count........................... : 8 - Thread Count......................... : 16 MSR_PLATFORM_INFO................(0xCE) : 0x80C3BF3811E00 ------------------------------------------ - Maximum Non-Turbo Ratio.............. : 0x1E (3000 MHz) - Ratio Limit for Turbo Mode........... : 1 (programmable) - TDP Limit for Turbo Mode............. : 1 (programmable) - Low Power Mode Support............... : 1 (LPM supported) - Number of ConfigTDP Levels........... : 1 (additional TDP level(s) available) - Maximum Efficiency Ratio............. : 12 - Minimum Operating Ratio.............. : 8 MSR_PMG_CST_CONFIG_CONTROL.......(0xE2) : 0x7E000403 ------------------------------------------ - I/O MWAIT Redirection Enable......... : 1 (enabled, IO read of MSR(0xE4) mapped to MWAIT) - CFG Lock............................. : 0 (MSR not locked) - C3 State Auto Demotion............... : 1 (enabled) - C1 State Auto Demotion............... : 1 (enabled) - C3 State Undemotion.................. : 1 (enabled) - C1 State Undemotion.................. : 1 (enabled) - Package C-State Auto Demotion........ : 1 (enabled) - Package C-State Undemotion........... : 1 (enabled) MSR_PMG_IO_CAPTURE_BASE..........(0xE4) : 0x10414 ------------------------------------------ - LVL_2 Base Address................... : 0x414 - C-state Range........................ : 1 (C6 is the max C-State to include) IA32_MPERF.......................(0xE7) : 0x1E520E3971 IA32_APERF.......................(0xE8) : 0x2942B9076B MSR_FLEX_RATIO...................(0x194) : 0xE0000 ------------------------------------------ MSR_IA32_PERF_STATUS.............(0x198) : 0x27F500002B00 ------------------------------------------ - Current Performance State Value...... : 0x2B00 (4300 MHz) MSR_IA32_PERF_CONTROL............(0x199) : 0x3200 ------------------------------------------ - Target performance State Value....... : 0x3200 (5000 MHz) - Intel Dynamic Acceleration........... : 0 (IDA engaged) IA32_CLOCK_MODULATION............(0x19A) : 0x0 IA32_THERM_STATUS................(0x19C) : 0x88380000 IA32_MISC_ENABLES................(0x1A0) : 0x850089 ------------------------------------------ - Fast-Strings......................... : 1 (enabled) - Automatic Thermal Control Circuit.... : 1 (enabled) - Performance Monitoring............... : 1 (available) - Processor Event Based Sampling....... : 0 (PEBS supported) - Enhanced Intel SpeedStep Technology.. : 1 (enabled) - MONITOR FSM.......................... : 1 (MONITOR/MWAIT supported) - CFG Lock............................. : 0 (MSR not locked) MSR_TEMPERATURE_TARGET...........(0x1A2) : 0x591200 ------------------------------------------ - Turbo Attenuation Units.............. : 0 - Temperature Target................... : 89 - TCC Activation Offset................ : 0 MSR_MISC_PWR_MGMT................(0x1AA) : 0x400001 ------------------------------------------ - EIST Hardware Coordination........... : 1 (hardware coordination disabled) - Energy/Performance Bias support...... : 1 - Energy/Performance Bias.............. : 0 (disabled/MSR not visible to software) - Thermal Interrupt Coordination Enable : 1 (thermal interrupt routed to all cores) MSR_TURBO_RATIO_LIMIT............(0x1AD) : 0x2B2B2B2B2B2B2B2B ------------------------------------------ - Maximum Ratio Limit for C01.......... : 2B (4300 MHz) - Maximum Ratio Limit for C02.......... : 2B (4300 MHz) - Maximum Ratio Limit for C03.......... : 2B (4300 MHz) - Maximum Ratio Limit for C04.......... : 2B (4300 MHz) - Maximum Ratio Limit for C05.......... : 2B (4300 MHz) - Maximum Ratio Limit for C06.......... : 2B (4300 MHz) - Maximum Ratio Limit for C07.......... : 2B (4300 MHz) - Maximum Ratio Limit for C08.......... : 2B (4300 MHz) IA32_ENERGY_PERF_BIAS............(0x1B0) : 0x1 ------------------------------------------ - Power Policy Preference...............: 1 (highest performance) MSR_POWER_CTL....................(0x1FC) : 0x21040059 ------------------------------------------ - C1E Enable............................: 0 (disabled) MSR_RAPL_POWER_UNIT..............(0x606) : 0xA0E03 ------------------------------------------ - Power Units.......................... : 3 (1/8 Watt) - Energy Status Units.................. : 14 (61 micro-Joules) - Time Units .......................... : 10 (976.6 micro-Seconds) MSR_PKG_POWER_LIMIT..............(0x610) : 0x7FFD00014EA82 ------------------------------------------ - Package Power Limit #1............... : 3408 Watt - Enable Power Limit #1................ : 1 (enabled) - Package Clamping Limitation #1....... : 0 (disabled) - Time Window for Power Limit #1....... : 10 (2560 milli-Seconds) - Package Power Limit #2............... : 4090 Watt - Enable Power Limit #2................ : 1 (enabled) - Package Clamping Limitation #2....... : 1 (allow going below OS-requested P/T state setting Time Window for Power Limit #2) - Time Window for Power Limit #2....... : 3 (20 milli-Seconds) - Lock................................. : 0 (MSR not locked) MSR_PKG_ENERGY_STATUS............(0x611) : 0x10F20D8E ------------------------------------------ - Total Energy Consumed................ : 17352 Joules (Watt = Joules / seconds) MSR_PKG_POWER_INFO...............(0x614) : 0x1280460 ------------------------------------------ - Thermal Spec Power................... : 140 Watt - Minimum Power........................ : 0 - Maximum Power........................ : 0 - Maximum Time Window.................. : 0 MSR_PP0_POWER_LIMIT..............(0x638) : 0x14FFD0 ------------------------------------------ - Power Limit.......................... : 4090 Watt - Enable Power Limit................... : 1 (enabled) - Clamping Limitation.................. : 0 (disabled) - Time Window for Power Limit.......... : 10 (10240 milli-Seconds) - Lock................................. : 0 (MSR not locked) MSR_PP0_ENERGY_STATUS............(0x639) : 0x0 MSR_TURBO_ACTIVATION_RATIO.......(0x64C) : 0x0 MSR_CONFIG_TDP_NOMINAL...........(0x648) : 0x1E MSR_CONFIG_TDP_LEVEL1............(0x649) : 0x940000001B0460 MSR_CONFIG_TDP_LEVEL2............(0x64a) : 0x94000000000000 MSR_CONFIG_TDP_CONTROL...........(0x64b) : 0x0 MSR_TURBO_ACTIVATION_RATIO.......(0x64c) : 0x0 MSR_PKGC6_IRTL...................(0x60b) : 0x0 MSR_PKG_C2_RESIDENCY.............(0x60d) : 0x195D174B216 MSR_PKG_C3_RESIDENCY.............(0x3f8) : 0x18ACFE MSR_PKG_C6_RESIDENCY.............(0x3f9) : 0x204F75C468C IA32_TSC_DEADLINE................(0x6E0) : 0x734841C043E CPU Ratio Info: ------------------------------------------ Base Clock Frequency (BLCK)............. : 100 MHz Maximum Efficiency Ratio/Frequency.......: 12 (1200 MHz) Maximum non-Turbo Ratio/Frequency........: 30 (3000 MHz) Maximum Turbo Ratio/Frequency............: 43 (4300 MHz) P-State ratio * 100 = Frequency in MHz ------------------------------------------ CPU P-States [ 37 (43) ] CPU C3-Cores [ 1 2 7 8 10 12 15 ] CPU C6-Cores [ 0 2 4 7 8 10 12 14 ] CPU P-States [ 27 37 (43) ] CPU C3-Cores [ 1 2 6 7 8 10 12 14 15 ] CPU C6-Cores [ 0 2 3 4 6 7 8 10 12 14 ] CPU P-States [ (12) 27 28 37 43 ] CPU C3-Cores [ 0 1 2 6 7 8 10 12 14 15 ] CPU C6-Cores [ 0 1 2 3 4 6 7 8 10 12 14 ] CPU P-States [ 12 27 28 37 39 (43) ] CPU P-States [ 12 27 28 31 37 39 (43) ] CPU C6-Cores [ 0 1 2 3 4 6 7 8 9 10 12 14 ] CPU P-States [ 12 27 28 31 33 37 39 (43) ] CPU C6-Cores [ 0 1 2 3 4 6 7 8 9 10 11 12 14 ] CPU C6-Cores [ 0 1 2 3 4 5 6 7 8 9 10 11 12 14 ] CPU C6-Cores [ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 ] CPU P-States [ (12) 27 28 31 33 35 37 39 43 ] CPU P-States [ (12) 27 28 31 33 35 37 39 41 43 ] CPU P-States [ (12) 27 28 29 31 33 35 37 39 41 43 ] CPU C3-Cores [ 0 1 2 6 7 8 10 12 13 14 15 ] CPU P-States [ (12) 25 27 28 29 31 33 35 37 39 41 43 ] CPU C3-Cores [ 0 1 2 3 6 7 8 10 11 12 13 14 15 ] CPU C6-Cores [ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ] CPU P-States [ (12) 23 25 27 28 29 31 33 35 37 39 41 43 ] CPU P-States [ (12) 23 25 27 28 29 30 31 33 35 37 39 41 43 ] CPU P-States [ 12 23 25 27 28 29 30 31 33 34 35 37 39 41 (43) ] CPU P-States [ 12 23 25 27 28 29 30 31 33 34 35 37 38 39 41 (43) ] CPU P-States [ 12 23 25 26 27 28 29 30 31 33 34 35 37 38 39 41 (43) ] CPU P-States [ 12 23 25 26 27 28 29 30 31 33 34 35 36 37 38 39 41 (43) ] manoranjans-Pro:~ manoranjan$ config.plist.zip 1 Link to comment Share on other sites More sharing options...
Fergarth Posted October 30, 2016 Share Posted October 30, 2016 nmano, what a great fight that you had with XCPM lol. But it's good when the effort and dedication are rewarded.And I finally managed to get sound from the ALC1150 through original AppleHDA.Bye bye voodooHDA and thanks for everything 1 Link to comment Share on other sites More sharing options...
ekwipt Posted November 1, 2016 Share Posted November 1, 2016 nmano, your patch 1 is restarting my system? My Patch 1: <dict> <key>Comment</key> <string>SammlerG Sierra xcpm MSR Patch 1 / xcpm support Pike R. Alpha</string> <key>Disabled</key> <false/> <key>Find</key> <data> qgEAANwzAAAAAAAAAAAAAAAAAAAAAAAAAQ== </data> <key>Replace</key> <data> qgEAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA== </data> </dict> Your patch 1: <dict> <key>Comment</key> <string>SammlerG Sierra xcpm MSR Patch 1 / xcpm support Pike R. Alpha/0x82D300/MSR_MISC_PWR_MGMT/0x1AA</string> <key>Disabled</key> <true/> <key>Find</key> <data> qgEAANwzAAAAAAAAAAAAAAAAAAAAAAAAAQ== </data> <key>Replace</key> <data> qgEAANwzAAAAAAAAAAAAAAAAAAAAAAAAAA== </data> </dict> Data from my output: MSR_MISC_PWR_MGMT................(0x1AA) : 0x402000 (is this the problem different from yours?) ------------------------------------------ - EIST Hardware Coordination........... : 0 (hardware coordination enabled) - Energy/Performance Bias support...... : 1 - Energy/Performance Bias.............. : 0 (disabled/MSR not visible to software) - Thermal Interrupt Coordination Enable : 1 (thermal interrupt routed to all cores) Link to comment Share on other sites More sharing options...
thenightflyer Posted November 1, 2016 Share Posted November 1, 2016 nmano, your patch 1 is restarting my system? My Patch 1: <dict> <key>Comment</key> <string>SammlerG Sierra xcpm MSR Patch 1 / xcpm support Pike R. Alpha</string> <key>Disabled</key> <false/> <key>Find</key> <data> qgEAANwzAAAAAAAAAAAAAAAAAAAAAAAAAQ== </data> <key>Replace</key> <data> qgEAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA== </data> </dict> Your patch 1: <dict> <key>Comment</key> <string>SammlerG Sierra xcpm MSR Patch 1 / xcpm support Pike R. Alpha/0x82D300/MSR_MISC_PWR_MGMT/0x1AA</string> <key>Disabled</key> <true/> <key>Find</key> <data> qgEAANwzAAAAAAAAAAAAAAAAAAAAAAAAAQ== </data> <key>Replace</key> <data> qgEAANwzAAAAAAAAAAAAAAAAAAAAAAAAAA== </data> </dict> Data from my output: MSR_MISC_PWR_MGMT................(0x1AA) : 0x402000 (is this the problem different from yours?) ------------------------------------------ - EIST Hardware Coordination........... : 0 (hardware coordination enabled) - Energy/Performance Bias support...... : 1 - Energy/Performance Bias.............. : 0 (disabled/MSR not visible to software) - Thermal Interrupt Coordination Enable : 1 (thermal interrupt routed to all cores) If the system is quite good...if you have no reset, no freezes no other problems, why to try always new patches if they are unuseful to have better performances??? I think x99 xcpm is good enough for now...till Apple will not update mac pro system we will not have the perfection! I prefer to stay with Sammler patches because my system is stable, i'm not an overclocker, i'm not a gamer, i'm not the one who is excited in looking an high geekbench score. Of course is xcpm will be tuned by other users more experts than me it will be good....Of course we must appreciate and thanks everyone here for their efforts to make everything better day after day...but i think there is a kind of race to try and add everyday 2 or more patches that will not change our just good performances with x99 system. OF course this is IMHO...others can not agree with me 1 Link to comment Share on other sites More sharing options...
mfc88 Posted November 1, 2016 Share Posted November 1, 2016 Does anyone have/know of any patches for the Asus X99 Pro/USB 3.1 to fix the following...? What I have working (stable w/o patched bios):- CPU Stepping- Frequency Vectors- Shutdown/restart- GTX 980TI graphics- USB audio- Ethernet What doesn't work:- Sleep- Some front USB ports- Any sort of onboard Realtek 1150 Audio (using a monitor over HDMI cable connected to 980TI) Specifically, I'm trying to get my computer to sleep, but it awakes instantly (with no signal to monitor): Assertion status system-wide: BackgroundTask 0 ApplePushServiceTask 0 UserIsActive 1 PreventUserIdleDisplaySleep 0 PreventSystemSleep 0 ExternalMedia 0 PreventUserIdleSystemSleep 0 NetworkClientActive 0 Listed by owning process: pid 99(hidd): [0x000000140009806f] 00:02:50 UserIsActive named: "com.apple.iohideventsystem.queue.tickle" Kernel Assertions: 0x4=USB id=500 level=255 0x4=USB mod=12/31/69, 4:00 PM description=com.apple.usb.externaldevice.14500000 owner=Keyboard -- QuickFire XT id=501 level=255 0x4=USB mod=12/31/69, 4:00 PM description=com.apple.usb.externaldevice.14600000 owner=Microsoft IntelliMouse® Optical id=502 level=255 0x4=USB mod=12/31/69, 4:00 PM description=com.apple.usb.externaldevice.14b00000 owner=H100iGTX Cooler id=503 level=255 0x4=USB mod=12/31/69, 4:00 PM description=com.apple.usb.externaldevice.14a00000 owner=ASM107x id=504 level=255 0x4=USB mod=12/31/69, 4:00 PM description=com.apple.usb.externaldevice.14a10000 owner=BCM20702A0 id=505 level=255 0x4=USB mod=12/31/69, 4:00 PM description=com.apple.usb.externaldevice.14a30000 owner=m9XX Idle sleep preventers: IODisplayWrangler What caused awake: 2016-11-01 11:50:20.494603-0700 localhost kernel[0]: (AppleACPIPlatform) ACPI: sleep states S3 S4 S5 2016-11-01 11:50:21.659279-0700 localhost kernel[0]: (IOUSBHostFamily) 000002.403371 AppleUSBHostResources@: AppleUSBHostResources::allocateDownstreamBusCurrentGated: assuming successful wakeUnits 0 sleepUnits 0 2016-11-01 11:50:21.660041-0700 localhost kernel[0]: (IOUSBHostFamily) 000002.404133 AppleUSBHostResources@: AppleUSBHostResources::allocateDownstreamBusCurrentGated: assuming successful wakeUnits 100 sleepUnits 0 2016-11-01 11:50:21.660277-0700 localhost kernel[0]: (IOUSBHostFamily) 000002.404369 AppleUSBHostResources@: AppleUSBHostResources::allocateDownstreamBusCurrentGated: assuming successful wakeUnits 100 sleepUnits 0 2016-11-01 11:50:21.660772-0700 localhost kernel[0]: (IOUSBHostFamily) 000002.404862 AppleUSBHostResources@: AppleUSBHostResources::allocateDownstreamBusCurrentGated: assuming successful wakeUnits 100 sleepUnits 0 2016-11-01 11:50:21.692211-0700 localhost kernel[0]: (IOUSBHostFamily) 000002.433784 AppleUSBHostResources@: AppleUSBHostResources::allocateDownstreamBusCurrentGated: assuming successful wakeUnits 100 sleepUnits 0 2016-11-01 11:50:21.699247-0700 localhost kernel[0]: (IOUSBHostFamily) 000002.443337 AppleUSBHostResources@: AppleUSBHostResources::allocateDownstreamBusCurrentGated: assuming successful wakeUnits 100 sleepUnits 0 2016-11-01 11:50:21.700165-0700 localhost kernel[0]: (IOUSBHostFamily) 000002.444255 AppleUSBHostResources@: AppleUSBHostResources::allocateDownstreamBusCurrentGated: assuming successful wakeUnits 100 sleepUnits 0 2016-11-01 11:50:21.707347-0700 localhost kernel[0]: (IOUSBHostFamily) 000002.451436 AppleUSBHostResources@: AppleUSBHostResources::allocateDownstreamBusCurrentGated: assuming successful wakeUnits 100 sleepUnits 0 2016-11-01 11:50:21.707963-0700 localhost kernel[0]: (IOUSBHostFamily) 000002.452052 AppleUSBHostResources@: AppleUSBHostResources::allocateDownstreamBusCurrentGated: assuming successful wakeUnits 100 sleepUnits 0 2016-11-01 11:50:21.708218-0700 localhost kernel[0]: (IOUSBHostFamily) 000002.452308 AppleUSBHostResources@: AppleUSBHostResources::allocateDownstreamBusCurrentGated: assuming successful wakeUnits 100 sleepUnits 0 2016-11-01 11:50:21.708438-0700 localhost kernel[0]: (IOUSBHostFamily) 000002.452528 AppleUSBHostResources@: AppleUSBHostResources::allocateDownstreamBusCurrentGated: assuming successful wakeUnits 100 sleepUnits 0 2016-11-01 11:50:21.708659-0700 localhost kernel[0]: (IOUSBHostFamily) 000002.452749 AppleUSBHostResources@: AppleUSBHostResources::allocateDownstreamBusCurrentGated: assuming successful wakeUnits 100 sleepUnits 0 2016-11-01 11:50:21.709090-0700 localhost kernel[0]: (IOUSBHostFamily) 000002.453181 AppleUSBHostResources@: AppleUSBHostResources::allocateDownstreamBusCurrentGated: assuming successful wakeUnits 100 sleepUnits 0 2016-11-01 11:50:21.709321-0700 localhost kernel[0]: (IOUSBHostFamily) 000002.453411 AppleUSBHostResources@: AppleUSBHostResources::allocateDownstreamBusCurrentGated: assuming successful wakeUnits 100 sleepUnits 0 2016-11-01 11:50:21.709538-0700 localhost kernel[0]: (IOUSBHostFamily) 000002.453629 AppleUSBHostResources@: AppleUSBHostResources::allocateDownstreamBusCurrentGated: assuming successful wakeUnits 150 sleepUnits 0 2016-11-01 11:50:21.916155-0700 localhost kernel[0]: (IOUSBHostFamily) 000002.660246 AppleUSBHostResources@: AppleUSBHostResources::allocateDownstreamBusCurrentGated: assuming successful wakeUnits 100 sleepUnits 0 2016-11-01 11:50:21.977544-0700 localhost kernel[0]: (IOUSBHostFamily) 000002.721634 AppleUSBHostResources@: AppleUSBHostResources::allocateDownstreamBusCurrentGated: assuming successful wakeUnits 100 sleepUnits 0 2016-11-01 11:50:22.152525-0700 localhost kernel[0]: (IOUSBHostFamily) 000002.896615 AppleUSBHostResources@: AppleUSBHostResources::allocateDownstreamBusCurrentGated: assuming successful wakeUnits 100 sleepUnits 0 2016-11-01 11:50:22.178961-0700 localhost kernel[0]: (IOUSBHostFamily) 000002.923051 AppleUSBHostResources@: AppleUSBHostResources::allocateDownstreamBusCurrentGated: assuming successful wakeUnits 100 sleepUnits 0 2016-11-01 11:50:23.531777-0700 localhost kernel[0]: PMRD: prevent idle sleep list: IODisplayWrangler+ (1) 2016-11-01 11:50:23.531779-0700 localhost kernel[0]: prevent idle sleep list: IODisplayWrangler+ (1) 2016-11-01 11:50:24.662125-0700 localhost coreduetd[70]: [com.apple.coreduet.admissionCheck.] sleepwake @ address [7fd219012100] 1 libsystem_c.dylib 0x00007fffaefc4f23 sleep$NOCANCEL + 42 "RequireScreenSleep" => <bool: 0x7fffc2490aa8>: true "RequireScreenSleep" => <bool: 0x7fffc2490aa8>: true "RequireScreenSleep" => <bool: 0x7fffc2490aa8>: true "RequireScreenSleep" => <bool: 0x7fffc2490aa8>: true "RequireScreenSleep" => <bool: 0x7fffc2490aa8>: true "RequireScreenSleep" => <bool: 0x7fffc2490ac8>: false "RequireScreenSleep" => <bool: 0x7fffc2490aa8>: true "RequireScreenSleep" => <bool: 0x7fffc2490aa8>: true "RequireScreenSleep" => <bool: 0x7fffc2490aa8>: true config.plist.zip DSDT_SSDT.zip Link to comment Share on other sites More sharing options...
Fergarth Posted November 1, 2016 Share Posted November 1, 2016 Hi guys, Can anyone tell me why the bluethooh, despite being installed and active, is not visible to other devices and does not detect other devices? In El cap, with the same config it worked well... Because I know that has happened to many people, even with real Macs, only for information, leave this experience. I restarted the router and my wireless did not return to pick up my network, although detect neighboring networks. The secret to get back to our network, is entering the router settings and move to a lower channel to 12. Selected the channel 9 and my network appeared again! Link to comment Share on other sites More sharing options...
Fergarth Posted November 1, 2016 Share Posted November 1, 2016 Does anyone have/know of any patches for the Asus X99 Pro/USB 3.1 to fix the following...? What I have working: - CPU Stepping - Frequency Vectors - Shutdown/restart - GTX 980TI graphics - USB audio - Ethernet What doesn't work: - Sleep - Some front USB ports - Any sort of onboard Realtek 1150 Audio (using a monitor over HDMI cable connected to 980TI) HI, welcome! And what is your CPU? First, to be able to help you best, it is advisable to create a signature with all specifications of your hardware. But I have what you need. Soon I'll help you, I´m in the smart phone now. Ps: You have a very strange plist Link to comment Share on other sites More sharing options...
maleorderbride Posted November 1, 2016 Share Posted November 1, 2016 For macOS 10.12.1 (16B2657) i can´t use AppleALC.kext. When this kext is installed, my system hangs at booting. So i removed AppleALC.kext and use audio_cloverALC-120_v1.0d.command. This is working for me, and no boot problems. Were you using the bootflag -alcbeta for 10.12? That is mandatory for AppleALC.kext. Link to comment Share on other sites More sharing options...
mfc88 Posted November 1, 2016 Share Posted November 1, 2016 HI, welcome! And what is your CPU? First, to be able to help you best, it is advisable to create a signature with all specifications of your hardware. But I have what you need. Soon I'll help you, I´m in the smart phone now. Ps: You have a very strange plist Sorry about that! I rewrote the post several times and forgot to include it: Specs: - i7-5930k (stock) - Corsair Hydro Series H100i GTX CPU cooler - Asus x99 PRO/USB 3.1 - G.SKILL TridentZ Series 16GB (2 x 8GB) 288-Pin DDR4 SDRAM DDR4 3200 (x2) - EVGA GeForce GTX 980 Ti + ACX2.0 + w/BP - Grace m9xx USB DAC - Samsung NVMe 950 (currently with Windows 10) - Samsung 850 SSD (currently with Mac OS X Sierra 10.12.1) - Samsung 830 SSD (Mac OS X backup) - Samsung 2TB Hybrid (Backup for everything) - Corsair Carbide Series Air 540 Case Thanks for the help! Most of my plist (patches, as well as SSDTs) come from this following this guide. Link to comment Share on other sites More sharing options...
ekwipt Posted November 1, 2016 Share Posted November 1, 2016 If the system is quite good...if you have no reset, no freezes no other problems, why to try always new patches if they are unuseful to have better performances??? I think x99 xcpm is good enough for now...till Apple will not update mac pro system we will not have the perfection! I prefer to stay with Sammler patches because my system is stable, i'm not an overclocker, i'm not a gamer, i'm not the one who is excited in looking an high geekbench score. Of course is xcpm will be tuned by other users more experts than me it will be good....Of course we must appreciate and thanks everyone here for their efforts to make everything better day after day...but i think there is a kind of race to try and add everyday 2 or more patches that will not change our just good performances with x99 system. OF course this is IMHO...others can not agree with me Of course you are right, just trying a few different things 1 Link to comment Share on other sites More sharing options...
Recommended Posts