[Guide] Mac OSX 10.12 and 10.13 with X99 Broadwell-E family and Haswell-E family

Matthew82 · October 6, 2016

Can someone help me with patching bios for Asus x99 deluxe u3.1 ?

https://www.dropbox.com/s/ycbltlp97mw0vnp/X99-DELUXE-ASUS-3301.CAP.zip?dl=0

Fljagd · October 6, 2016

@Fabiosun

grazie mille

Last login: Thu Oct 6 19:21:04 on console

Mac-Pro-de-Fljagd:~ fljagd$ sudo kextload /Users/fljagd/Desktop/AppleIntelInfo.kext
Password:
Mac-Pro-de-Fljagd:~ fljagd$ sudo cat /tmp/appleintelinfo.dat

AppleIntelInfo.kext v1.8c Copyright © 2012-2016 Pike R. Alpha. All rights reserved

Settings:
------------------------------------------
logMSRs..................................: 1
logIGPU..................................: 0
logCStates...............................: 1
logIPGStyle..............................: 1

Warning: Clover hw.busfrequency error detected : 17d78400
InitialTSC...............................: 0x52d22ad9ac0 (172 MHz)
MWAIT C-States...........................: 8480

Processor Brandstring....................: Intel® Core i7-5820K CPU @ 3.30GHz

Processor Signature..................... : 0x306F2
------------------------------------------
- Family............................... : 6
- Stepping............................. : 2
- Model................................ : 0x3F (63)

Model Specific Registers (MSRs)
------------------------------------------

MSR_CORE_THREAD_COUNT............(0x35) : 0xFFFFFF803474BE00
------------------------------------------
- Core Count........................... : 6
- Thread Count......................... : 12

MSR_PLATFORM_INFO................(0xCE) : 0x20080C3BF3812100
------------------------------------------
- Maximum Non-Turbo Ratio.............. : 0x21 (3300 MHz)
- Ratio Limit for Turbo Mode........... : 1 (programmable)
- TDP Limit for Turbo Mode............. : 1 (programmable)
- Low Power Mode Support............... : 1 (LPM supported)
- Number of ConfigTDP Levels........... : 1 (additional TDP level(s) available)
- Maximum Efficiency Ratio............. : 12
- Minimum Operating Ratio.............. : 8

MSR_PMG_CST_CONFIG_CONTROL.......(0xE2) : 0x400
------------------------------------------
- I/O MWAIT Redirection Enable......... : 1 (enabled, IO read of MSR(0xE4) mapped to MWAIT)
- CFG Lock............................. : 0 (MSR not locked)
- C3 State Auto Demotion............... : 0 (disabled/unsupported)
- C1 State Auto Demotion............... : 0 (disabled/unsupported)
- C3 State Undemotion.................. : 0 (disabled/unsupported)
- C1 State Undemotion.................. : 0 (disabled/unsupported)
- Package C-State Auto Demotion........ : 0 (disabled/unsupported)
- Package C-State Undemotion........... : 0 (disabled/unsupported)

MSR_PMG_IO_CAPTURE_BASE..........(0xE4) : 0x10414
------------------------------------------
- LVL_2 Base Address................... : 0x414
- C-state Range........................ : 1 (C6 is the max C-State to include)

IA32_MPERF.......................(0xE7) : 0x84335D3BE
IA32_APERF.......................(0xE8) : 0xA5DAA6338

MSR_FLEX_RATIO...................(0x194) : 0xE0000
------------------------------------------

MSR_IA32_PERF_STATUS.............(0x198) : 0x289400002B00
------------------------------------------
- Current Performance State Value...... : 0x2B00 (4300 MHz)

MSR_IA32_PERF_CONTROL............(0x199) : 0x2100
------------------------------------------
- Target performance State Value....... : 0x2100 (3300 MHz)
- Intel Dynamic Acceleration........... : 0 (IDA engaged)

IA32_CLOCK_MODULATION............(0x19A) : 0x0
IA32_THERM_STATUS................(0x19C) : 0x88460000

IA32_MISC_ENABLES................(0x1A0) : 0x840089
------------------------------------------
- Fast-Strings......................... : 1 (enabled)
- Automatic Thermal Control Circuit.... : 1 (enabled)
- Performance Monitoring............... : 1 (available)
- Enhanced Intel SpeedStep Technology.. : 0 (disabled)

MSR_TEMPERATURE_TARGET...........(0x1A2) : 0x670A00
------------------------------------------
- Turbo Attenuation Units.............. : 0
- Temperature Target................... : 103
- TCC Activation Offset................ : 0

MSR_MISC_PWR_MGMT................(0x1AA) : 0x400000
------------------------------------------
- EIST Hardware Coordination........... : 0 (enabled)

MSR_TURBO_RATIO_LIMIT............(0x1AD) : 0x22222B2B2B2B2B2B
------------------------------------------

IA32_ENERGY_PERF_BIAS............(0x1B0) : 0x0

MSR_POWER_CTL....................(0x1FC) : 0x29040059
------------------------------------------
- C1E Enable............................: 0

MSR_RAPL_POWER_UNIT..............(0x606) : 0xA0E03
------------------------------------------
- Power Units.......................... : 3 (1/8 Watt)
- Energy Status Units.................. : 14 (61 micro-Joules)
- Time Units .......................... : 10 (976.6 micro-Seconds)

MSR_PKG_POWER_LIMIT..............(0x610) : 0x7FFF80015FFF8
------------------------------------------
- Package Power Limit #1............... : 4095 Watt
- Enable Power Limit #1................ : 1 (enabled)
- Package Clamping Limitation #1....... : 1 (allow going below OS-requested P/T state during Time Window for Power Limit #1)
- Time Window for Power Limit #1....... : 10 (2560 milli-Seconds)
- Package Power Limit #2............... : 4095 Watt
- Enable Power Limit #2................ : 1 (enabled)
- Package Clamping Limitation #2....... : 1 (allow going below OS-requested P/T state setting Time Window for Power Limit #2)
- Time Window for Power Limit #2....... : 3 (20 milli-Seconds)
- Lock................................. : 0 (MSR not locked)

MSR_PKG_ENERGY_STATUS............(0x611) : 0x97364
------------------------------------------
- Total Energy Consumed................ : 37 Joules (Watt = Joules / seconds)

MSR_PKG_POWER_INFO...............(0x614) : 0x1280460
------------------------------------------
- Thermal Spec Power................... : 140 Watt
- Minimum Power........................ : 0
- Maximum Power........................ : 0
- Maximum Time Window.................. : 0

MSR_PP0_POWER_LIMIT..............(0x638) : 0x0

MSR_PP0_ENERGY_STATUS............(0x639) : 0x0

MSR_TURBO_ACTIVATION_RATIO.......(0x64C) : 0x0

MSR_CONFIG_TDP_NOMINAL...........(0x648) : 0x21
MSR_CONFIG_TDP_LEVEL1............(0x649) : 0x940000001E0460
MSR_CONFIG_TDP_LEVEL2............(0x64a) : 0x94000000000000
MSR_CONFIG_TDP_CONTROL...........(0x64b) : 0x0
MSR_TURBO_ACTIVATION_RATIO.......(0x64c) : 0x0
MSR_PKGC6_IRTL...................(0x60b) : 0x0
MSR_PKG_C2_RESIDENCY.............(0x60d) : 0x0
MSR_PKG_C6_RESIDENCY.............(0x3f9) : 0x0

IA32_TSC_DEADLINE................(0x6E0) : 0x52D26473D33

CPU Ratio Info:
------------------------------------------
Base Clock Frequency (BLCK)............. : 100 MHz
Maximum Efficiency Ratio/Frequency.......: 12 (1200 MHz)
Maximum non-Turbo Ratio/Frequency........: 33 (3300 MHz)
Maximum Turbo Ratio/Frequency............: 43 (4300 MHz)
P-State ratio * 100 = Frequency in MHz
------------------------------------------
CPU P-States [ (12) 36 43 ]
CPU C6-Cores [ 0 2 4 6 8 10 ]
CPU P-States [ 12 32 36 (43) ]
CPU C6-Cores [ 0 2 4 5 6 8 10 ]
CPU C6-Cores [ 0 2 4 5 6 8 10 11 ]
CPU P-States [ (12) 23 32 36 43 ]
CPU P-States [ 12 23 32 36 38 (43) ]
CPU P-States [ 12 23 32 36 38 41 (43) ]
CPU P-States [ 12 23 32 35 36 38 41 (43) ]
CPU P-States [ 12 23 32 34 35 36 38 41 (43) ]
CPU C6-Cores [ 0 1 2 4 5 6 8 10 11 ]
CPU P-States [ (12) 23 25 32 34 35 36 38 41 43 ]
CPU P-States [ 12 23 25 32 34 35 36 38 39 41 (43) ]
CPU P-States [ (12) 23 25 28 32 34 35 36 38 39 41 43 ]
CPU P-States [ (12) 23 24 25 28 32 34 35 36 38 39 41 43 ]
CPU P-States [ (12) 23 24 25 27 28 32 34 35 36 38 39 41 43 ]
CPU P-States [ (12) 23 24 25 26 27 28 32 34 35 36 38 39 41 43 ]
CPU C6-Cores [ 0 1 2 4 5 6 7 8 10 11 ]
CPU P-States [ 12 23 24 25 26 27 28 32 33 34 35 36 38 39 41 (43) ]
CPU C6-Cores [ 0 1 2 4 5 6 7 8 9 10 11 ]
CPU P-States [ (12) 22 23 24 25 26 27 28 32 33 34 35 36 38 39 41 43 ]
CPU P-States [ 12 22 23 24 25 26 27 28 29 32 33 34 35 36 38 39 41 (43) ]
CPU C6-Cores [ 0 1 2 3 4 5 6 7 8 9 10 11 ]
CPU P-States [ (12) 21 22 23 24 25 26 27 28 29 32 33 34 35 36 38 39 41 43 ]
CPU P-States [ (12) 21 22 23 24 25 26 27 28 29 32 33 34 35 36 37 38 39 41 43 ]
CPU P-States [ (12) 21 22 23 24 25 26 27 28 29 30 32 33 34 35 36 37 38 39 41 43 ]
CPU P-States [ 12 21 22 23 24 25 26 27 28 29 30 32 33 34 35 36 37 38 39 40 41 (43) ]
Mac-Pro-de-Fljagd:~ fljagd$

SammlerG · October 6, 2016

Can someone help me with patching bios for Asus x99 deluxe u3.1 ?

https://www.dropbox.com/s/ycbltlp97mw0vnp/X99-DELUXE-ASUS-3301.CAP.zip?dl=0

Here is patched 3402 Bios for X99 Deluxe

X99D.CAP.zip

Fljagd · October 6, 2016

Bravò :-)

If you want setting QPI = 100 in clover bootloader you will solve this "problem":

Warning: Clover hw.busfrequency error detected : 17d78400

then you have also this:

- Package Power Limit #1............... : 4095 Watt

- Enable Power Limit #1................ : 1 (enabled)

- Package Clamping Limitation #1....... : 1 (allow going below OS-requested P/T state during Time Window for Power Limit #1)

- Time Window for Power Limit #1....... : 10 (2560 milli-Seconds)

- Package Power Limit #2............... : 4095 Watt

but I don't know how you can solve it

isn't very important , I think

Thank again

SammlerG · October 6, 2016

Bravò :-)

If you want setting QPI = 100 in clover bootloader you will solve this "problem":

Warning: Clover hw.busfrequency error detected : 17d78400

then you have also this:

- Package Power Limit #1............... : 4095 Watt

- Enable Power Limit #1................ : 1 (enabled)

- Package Clamping Limitation #1....... : 1 (allow going below OS-requested P/T state during Time Window for Power Limit #1)

- Time Window for Power Limit #1....... : 10 (2560 milli-Seconds)

- Package Power Limit #2............... : 4095 Watt

but I don't know how you can solve it

Power Limit must be manually edited in Bios

Go to "Internal CPU Powermangement" in section Ai Tweaker.

Here you can set long duration power limit / time window....

Matthew82 · October 6, 2016

Here is patched 3402 Bios for X99 Deluxe

Thank You.

BrooklynFilm · October 6, 2016

Can someone help me with patching bios for Asus x99 Pro u3.1 ?

https://www.dropbox.com/s/7pfi1suayi2isaw/X99-PRO-USB31-ASUS-3402.zip?dl=0

Thanks!

Balamut · October 6, 2016

I think I might have found whats causing my panic with the hyper threading on. Seems like Asus uses the the same ACPI for quad processors on the dual system, since APIC on my board have 120 CPU entries and DSDT have 4x48 cpu fields basically for 88series, 24 core CPUS.

Any of you fellas know how to edit apic.aml? Been searching the forums and the web but to no avail, or I might be wrong ...

MP Table:
#	APIC ID	Version	State		Family	Model	Step	Flags
#	 0	 0x15	 BSP, usable	 6	 15	 1	 0xbfebfbff
#	 2	 0x15	 AP, usable	 6	 15	 1	 0xbfebfbff
#	 4	 0x15	 AP, usable	 6	 15	 1	 0xbfebfbff
#	 6	 0x15	 AP, usable	 6	 15	 1	 0xbfebfbff
#	 8	 0x15	 AP, usable	 6	 15	 1	 0xbfebfbff
#	10	 0x15	 AP, usable	 6	 15	 1	 0xbfebfbff
#	16	 0x15	 AP, usable	 6	 15	 1	 0xbfebfbff
#	18	 0x15	 AP, usable	 6	 15	 1	 0xbfebfbff
#	20	 0x15	 AP, usable	 6	 15	 1	 0xbfebfbff
#	22	 0x15	 AP, usable	 6	 15	 1	 0xbfebfbff
#	24	 0x15	 AP, usable	 6	 15	 1	 0xbfebfbff
#	32	 0x15	 AP, usable	 6	 15	 1	 0xbfebfbff
#	34	 0x15	 AP, usable	 6	 15	 1	 0xbfebfbff
#	36	 0x15	 AP, usable	 6	 15	 1	 0xbfebfbff
#	38	 0x15	 AP, usable	 6	 15	 1	 0xbfebfbff
#	40	 0x15	 AP, usable	 6	 15	 1	 0xbfebfbff
#	42	 0x15	 AP, usable	 6	 15	 1	 0xbfebfbff
#	48	 0x15	 AP, usable	 6	 15	 1	 0xbfebfbff
#	50	 0x15	 AP, usable	 6	 15	 1	 0xbfebfbff
#	52	 0x15	 AP, usable	 6	 15	 1	 0xbfebfbff
#	54	 0x15	 AP, usable	 6	 15	 1	 0xbfebfbff
#	56	 0x15	 AP, usable	 6	 15	 1	 0xbfebfbff
#	64	 0x15	 AP, usable	 6	 15	 1	 0xbfebfbff
#	66	 0x15	 AP, usable	 6	 15	 1	 0xbfebfbff
#	68	 0x15	 AP, usable	 6	 15	 1	 0xbfebfbff
#	70	 0x15	 AP, usable	 6	 15	 1	 0xbfebfbff
#	72	 0x15	 AP, usable	 6	 15	 1	 0xbfebfbff
#	74	 0x15	 AP, usable	 6	 15	 1	 0xbfebfbff
#	80	 0x15	 AP, usable	 6	 15	 1	 0xbfebfbff
#	82	 0x15	 AP, usable	 6	 15	 1	 0xbfebfbff
#	84	 0x15	 AP, usable	 6	 15	 1	 0xbfebfbff
#	86	 0x15	 AP, usable	 6	 15	 1	 0xbfebfbff
#	88	 0x15	 AP, usable	 6	 15	 1	 0xbfebfbff
#	96	 0x15	 AP, usable	 6	 15	 1	 0xbfebfbff
#	98	 0x15	 AP, usable	 6	 15	 1	 0xbfebfbff
#	100	 0x15	 AP, usable	 6	 15	 1	 0xbfebfbff
#	102	 0x15	 AP, usable	 6	 15	 1	 0xbfebfbff
#	104	 0x15	 AP, usable	 6	 15	 1	 0xbfebfbff
#	106	 0x15	 AP, usable	 6	 15	 1	 0xbfebfbff
#	112	 0x15	 AP, usable	 6	 15	 1	 0xbfebfbff
#	114	 0x15	 AP, usable	 6	 15	 1	 0xbfebfbff
#	116	 0x15	 AP, usable	 6	 15	 1	 0xbfebfbff
#	118	 0x15	 AP, usable	 6	 15	 1	 0xbfebfbff
#	120	 0x15	 AP, usable	 6	 15	 1	 0xbfebfbff

nmano · October 6, 2016

Hi nmano,

I had to leave the Betas and return to the official version of Sierra 10.12 because there is no support for Nvidia Beta versions that followed. I took and did a fresh install with your XCPM 10.12 Haswell-E config.plist and your patchs, that works very well in my new installation. I always used the voodooHDA for ALC1150 and always worked without stress, but this time i wanted to try AppleHDA. I tried audio_cloverALC-120 script, but despite the system to recognize the audio, to be able to control the volume and select the various outputs and inputs, cannot hear any sound. Basing me in your wisdom, will you can give me a help again? Is something missing in my DSDT? It will be something I can do or change?

Thanks and greetings nmano.

Try AppleALC

http://www.insanelymac.com/forum/topic/311293-applealc-—-dynamic-applehda-patching/

Fergarth · October 7, 2016

Try AppleALC

http://www.insanelymac.com/forum/topic/311293-applealc-—-dynamic-applehda-patching/

Thanks nmano,

I made several attempts without success including the clover and [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url]. I chose to format the drive and make new installation. To have no more stress, I installed the kext voodooHDA 2.8.9 that works flawlessly with my ALC1150.

Fljagd · October 7, 2016

Try AppleALC

http://www.insanelymac.com/forum/topic/311293-applealc-—-dynamic-applehda-patching/

that works very well

Just put in Boot arg: aclbeta

choose the layout and put it in the config.plist and SSDT https://github.com/vit9696/AppleALC/wiki/Supported-codecs

SammlerG · October 7, 2016

Thank you SammlerG

I have not that problem..in my case auto is working well

Instead I would like to know How you have enabled in output C3 and different c demotion part! :-)

MSR_PMG_CST_CONFIG_CONTROL.......(0xE2)  : 0x7E000406
------------------------------------------
 - I/O MWAIT Redirection Enable......... : 1 (enabled, IO read of MSR(0xE4) mapped to MWAIT)
 - CFG Lock............................. : 0 (MSR not locked)
 - C3 State Auto Demotion............... : 1 (enabled)
 - C1 State Auto Demotion............... : 1 (enabled)
 - C3 State Undemotion.................. : 1 (enabled)
 - C1 State Undemotion.................. : 1 (enabled)
 - Package C-State Auto Demotion........ : 1 (enabled)
 - Package C-State Undemotion........... : 1 (enabled)

you must enable C6 in Bios to get C3 working.

Your MSR shows 400, so no C-States enabled. 401/402/403 shows enabled C-States.

But there is a problem with X99 Bios and states setting, this causes the jumping CPU in idle state.

Best settings at this time are 7E000403 / 5E00403 / 1E00403 / 403 / 402 / 401. This enables C-States, Demotion / Undemotion.

So first thing for you is getting C6 in Bios, MSR 0xE2 change to 402 or 403.

SammlerG · October 7, 2016

oh sorry Fljagd has 400

402 is the max. you get?

SammlerG · October 7, 2016

o.k.

Maybe it´s Xeon VS 5930K?

Apple supports only Ivy Xeon without xcpm.

Which xcpm Kernel patches you use to get 403/402?

SammlerG · October 7, 2016

got your patch.

Only thing i can say is, 403 gives C2,C3,C6 residency, 402 gives C2,C6. But C3 is not every boot set to use.

Can you boot without a xcpm patch, or does it stop at

++++++++++++++++++

SammlerG · October 7, 2016

o.k.

at this moment i´m testing

MSR_PMG_CST_CONFIG_CONTROL.......(0xE2) : 0x7E000007

------------------------------------------

- I/O MWAIT Redirection Enable......... : 0 (not enabled)

- CFG Lock............................. : 0 (MSR not locked)

- C3 State Auto Demotion............... : 1 (enabled)

- C1 State Auto Demotion............... : 1 (enabled)

- C3 State Undemotion.................. : 1 (enabled)

- C1 State Undemotion.................. : 1 (enabled)

- Package C-State Auto Demotion........ : 1 (enabled)

- Package C-State Undemotion........... : 1 (enabled)

Real iMacs shows this configs:

(0xE2) : 0x7E000008

or (0xE2) : 0x1E000005

Ivy iMac late 2012 shows 0x403

Fljagd · October 7, 2016

do you Know how to flash a modded bios?

again me :rolleyes:

can you give me the procedure for modded the bios?

Thank you

Edited October 7, 2016 by Fljagd

Fljagd · October 7, 2016

to do by yourself do you mean?

Yes

Fergarth · October 7, 2016

Can someone help me with patching bios for Asus x99 Pro u3.1 ?

https://www.dropbox.com/s/7pfi1suayi2isaw/X99-PRO-USB31-ASUS-3402.zip?dl=0

Thanks!

Hi Brooklyn,

I apologize innocent question, but what are the advantages of doing so? I have the same board and the same bios.

Fergarth · October 7, 2016

Hi

This is your msg 0xE2 bios unlocked

pay attention

You have to flash via usb flash button procedure and first you have to rename according your motherboard manual

Flashing is a risk

Flashing a bios done from others is worst too! :-)

Hi Fergarth

Unlocked bios could prevent some OSX reboot in some condition

Also I think if I need aì necessity to patch it i prefer to understand how to patch by myself if it is possible

Hi Fabio,

Grateful for your work and a few more geniuses who walk here, but in my case, I made a few days ago a new installation with the nmano config.plist (thanks nmano) and not have any problems at start-up or reboots or other issues. Everything is stable and good health with the original bios. Apparently is working like a real Mac and as such, do not feel the need to change anything for now. But of course, it is always a hypothesis to consider!

Obrigado.

By the way, a question!

According my CPU (signature), as I should correctly set this area for the CPU in Clover? Should I get put normal speed, or the turbo speed? Can anyone give me a hand? He is currently working as the picture, but I think that lack more information ...

Obrigado.

Fljagd · October 8, 2016

By the way, a question!

According my CPU (signature), as I should correctly set this area for the CPU in Clover? Should I get put normal speed, or the turbo speed? Can anyone give me a hand? He is currently working as the picture, but I think that lack more information ...

Obrigado.

Bom dia ( Figueira da Foz :wink_anim: )

I put nothing

Fljagd · October 8, 2016

Hi

if you can try to run this command from terminal and post the result here:

sysctl hw | grep frequency

Fljagd · October 8, 2016

ok

it is very bad..but it is I think only cosmetic thing

try to put QPI =100

then try again

you should see correct values for your bus frequency! :-)

yes

Fljagd · October 8, 2016

With QPI=100 now no mistake for initialTSC

AppleIntelInfo.kext v1.8c Copyright © 2012-2016 Pike R. Alpha. All rights reserved

Settings:
------------------------------------------
logMSRs..................................: 1
logIGPU..................................: 0
logCStates...............................: 1
logIPGStyle..............................: 1
InitialTSC...............................: 0x119ad3616cb8 (586 MHz)
MWAIT C-States...........................: 8480

Processor Brandstring....................: Intel(R) Core(TM) i7-5820K CPU @ 3.30GHz

Thank

SammlerG · October 8, 2016

For the moment, i have found a good working solution.

Working pretty well now for over one week.

Only jumping frequency in idle not solved, but it´s a problem with the Bios . Same problems without EIST in Windows.

Now working on a one patch solution, and give it to some people for testing.

AppleIntelInfo.kext v1.8e Copyright © 2012-2016 Pike R. Alpha. All rights reserved

Settings:
------------------------------------------
logMSRs..................................: 1
logIGPU..................................: 0
logCStates...............................: 1
logIPGStyle..............................: 1
InitialTSC...............................: 0x61869d3c2f (11 MHz)
MWAIT C-States...........................: 8480

Processor Brandstring....................: Intel(R) Core(TM) i7-5930K CPU @ 3.50GHz

Processor Signature..................... : 0x306F2
------------------------------------------
 - Family............................... : 6
 - Stepping............................. : 2
 - Model................................ : 0x3F (63)

Model Specific Registers (MSRs)
------------------------------------------

MSR_CORE_THREAD_COUNT............(0x35)  : 0xFFFFFF805B92A700
------------------------------------------
 - Core Count........................... : 6
 - Thread Count......................... : 12

MSR_PLATFORM_INFO................(0xCE)  : 0x20080C3BF3812300
------------------------------------------
 - Maximum Non-Turbo Ratio.............. : 0x23 (3500 MHz)
 - Ratio Limit for Turbo Mode........... : 1 (programmable)
 - TDP Limit for Turbo Mode............. : 1 (programmable)
 - Low Power Mode Support............... : 1 (LPM supported)
 - Number of ConfigTDP Levels........... : 1 (additional TDP level(s) available)
 - Maximum Efficiency Ratio............. : 12
 - Minimum Operating Ratio.............. : 8

MSR_PMG_CST_CONFIG_CONTROL.......(0xE2)  : 0x7E000007
------------------------------------------
 - I/O MWAIT Redirection Enable......... : 0 (not enabled)
 - CFG Lock............................. : 0 (MSR not locked)
 - C3 State Auto Demotion............... : 1 (enabled)
 - C1 State Auto Demotion............... : 1 (enabled)
 - C3 State Undemotion.................. : 1 (enabled)
 - C1 State Undemotion.................. : 1 (enabled)
 - Package C-State Auto Demotion........ : 1 (enabled)
 - Package C-State Undemotion........... : 1 (enabled)

MSR_PMG_IO_CAPTURE_BASE..........(0xE4)  : 0x10414
------------------------------------------
 - LVL_2 Base Address................... : 0x414
 - C-state Range........................ : 1 (C-States not included, I/O MWAIT redirection not enabled)

IA32_MPERF.......................(0xE7)  : 0x9E7783B71
IA32_APERF.......................(0xE8)  : 0xC06BF6658

MSR_FLEX_RATIO...................(0x194) : 0xE0000
------------------------------------------

MSR_IA32_PERF_STATUS.............(0x198) : 0x2ACC00002F00
------------------------------------------
 - Current Performance State Value...... : 0x2F00 (4700 MHz)

MSR_IA32_PERF_CONTROL............(0x199) : 0xC00
------------------------------------------
 - Target performance State Value....... : 0xC00 (1200 MHz)
 - Intel Dynamic Acceleration........... : 0 (IDA engaged)

IA32_CLOCK_MODULATION............(0x19A) : 0x0
IA32_THERM_STATUS................(0x19C) : 0x884F0000

IA32_MISC_ENABLES................(0x1A0) : 0x840089
------------------------------------------
 - Fast-Strings......................... : 1 (enabled)
 - Automatic Thermal Control Circuit.... : 1 (enabled)
 - Performance Monitoring............... : 1 (available)
 - Processor Event Based Sampling....... : 0 (PEBS supported)
 - Enhanced Intel SpeedStep Technology.. : 0 (disabled)
 - MONITOR FSM.......................... : 1 (MONITOR/MWAIT supported)
 - CFG Lock............................. : 0 (MSR not locked)

MSR_TEMPERATURE_TARGET...........(0x1A2) : 0x690A00
------------------------------------------
 - Turbo Attenuation Units.............. : 0 
 - Temperature Target................... : 105
 - TCC Activation Offset................ : 0

MSR_MISC_PWR_MGMT................(0x1AA) : 0x400000
------------------------------------------
 - EIST Hardware Coordination........... : 0 (hardware coordination enabled)
 - Energy/Performance Bias support...... : 1
 - Energy/Performance Bias.............. : 0 (disabled/MSR not visible to software)
 - Thermal Interrupt Coordination Enable : 1 (thermal interrupt routed to all cores)

MSR_TURBO_RATIO_LIMIT............(0x1AD) : 0x24242E2E2E2F2F30
------------------------------------------
 - Maximum Ratio Limit for C01.......... : 30 (4800 MHz) 
 - Maximum Ratio Limit for C02.......... : 2F (4700 MHz) 
 - Maximum Ratio Limit for C03.......... : 2F (4700 MHz) 
 - Maximum Ratio Limit for C04.......... : 2E (4600 MHz) 
 - Maximum Ratio Limit for C05.......... : 2E (4600 MHz) 
 - Maximum Ratio Limit for C06.......... : 2E (4600 MHz) 

IA32_ENERGY_PERF_BIAS............(0x1B0) : 0x1
------------------------------------------
 - Power Policy Preference...............: 1 (highest performance)

MSR_POWER_CTL....................(0x1FC) : 0x2904005B
------------------------------------------
 - C1E Enable............................: 1 (enabled)

MSR_RAPL_POWER_UNIT..............(0x606) : 0xA0E03
------------------------------------------
 - Power Units.......................... : 3 (1/8 Watt)
 - Energy Status Units.................. : 14 (61 micro-Joules)
 - Time Units .......................... : 10 (976.6 micro-Seconds)

MSR_PKG_POWER_LIMIT..............(0x610) : 0x786E0005B8640
------------------------------------------
 - Package Power Limit #1............... : 200 Watt
 - Enable Power Limit #1................ : 1 (enabled)
 - Package Clamping Limitation #1....... : 1 (allow going below OS-requested P/T state during Time Window for Power Limit #1)
 - Time Window for Power Limit #1....... : 45 (40960 milli-Seconds)
 - Package Power Limit #2............... : 220 Watt
 - Enable Power Limit #2................ : 1 (enabled)
 - Package Clamping Limitation #2....... : 1 (allow going below OS-requested P/T state setting Time Window for Power Limit #2)
 - Time Window for Power Limit #2....... : 3 (20 milli-Seconds)
 - Lock................................. : 0 (MSR not locked)

MSR_PKG_ENERGY_STATUS............(0x611) : 0x1FE3162
------------------------------------------
 - Total Energy Consumed................ : 2040 Joules (Watt = Joules / seconds)

MSR_PKG_POWER_INFO...............(0x614) : 0x1280460
------------------------------------------
 - Thermal Spec Power................... : 140 Watt
 - Minimum Power........................ : 0
 - Maximum Power........................ : 0
 - Maximum Time Window.................. : 0

MSR_PP0_POWER_LIMIT..............(0x638) : 0x0

MSR_PP0_ENERGY_STATUS............(0x639) : 0x0

MSR_TURBO_ACTIVATION_RATIO.......(0x64C) : 0x0

MSR_CONFIG_TDP_NOMINAL...........(0x648) : 0x23
MSR_CONFIG_TDP_LEVEL1............(0x649) : 0x94000000200460
MSR_CONFIG_TDP_LEVEL2............(0x64a) : 0x94000000000000
MSR_CONFIG_TDP_CONTROL...........(0x64b) : 0x0
MSR_TURBO_ACTIVATION_RATIO.......(0x64c) : 0x0
MSR_PKGC6_IRTL...................(0x60b) : 0x0
MSR_PKG_C2_RESIDENCY.............(0x60d) : 0x32AF17D54
MSR_PKG_C3_RESIDENCY.............(0x3f8) : 0x40C261
MSR_PKG_C6_RESIDENCY.............(0x3f9) : 0x5B9FA3E53

IA32_TSC_DEADLINE................(0x6E0) : 0x618A1296FD

CPU Ratio Info:
------------------------------------------
Base Clock Frequency (BLCK)............. : 100 MHz
Maximum Efficiency Ratio/Frequency.......: 12 (1200 MHz)
Maximum non-Turbo Ratio/Frequency........: 35 (3500 MHz)
Maximum Turbo Ratio/Frequency............: 48 (4800 MHz)
P-State ratio * 100 = Frequency in MHz
------------------------------------------
CPU P-States [ (12) 42 46 ]
CPU C3-Cores [ 0 ]
CPU C6-Cores [ 0 2 4 6 8 10 ]
CPU P-States [ 12 40 42 46 (48) ]
CPU C3-Cores [ 0 1 ]
CPU C6-Cores [ 0 1 2 3 4 5 6 7 8 9 10 11 ]
CPU P-States [ (12) 35 40 42 46 48 ]
CPU P-States [ 12 34 35 40 42 46 (48) ]
CPU P-States [ (12) 33 34 35 40 42 46 48 ]
CPU P-States [ (12) 29 33 34 35 40 42 46 48 ]
CPU P-States [ (12) 28 29 33 34 35 40 42 46 48 ]
CPU P-States [ 12 28 29 30 33 34 35 40 42 46 (48) ]
CPU P-States [ (12) 23 28 29 30 33 34 35 40 42 46 48 ]
CPU P-States [ (12) 23 28 29 30 33 34 35 36 40 42 46 48 ]
CPU P-States [ (12) 23 28 29 30 31 33 34 35 36 40 42 46 48 ]
CPU P-States [ 12 23 28 29 30 31 33 34 35 36 40 42 46 (47) 48 ]
CPU P-States [ (12) 23 28 29 30 31 33 34 35 36 40 42 45 46 47 48 ]
CPU P-States [ (12) 23 28 29 30 31 33 34 35 36 39 40 42 45 46 47 48 ]
CPU P-States [ (12) 23 28 29 30 31 33 34 35 36 37 39 40 42 45 46 47 48 ]
CPU P-States [ (12) 23 28 29 30 31 32 33 34 35 36 37 39 40 42 45 46 47 48 ]
CPU P-States [ 12 23 28 29 30 31 32 33 34 35 36 37 39 40 41 42 45 46 47 (48) ]
CPU P-States [ 12 23 28 29 30 31 32 33 34 35 36 37 39 40 41 42 43 45 46 (47) 48 ]
CPU P-States [ 12 23 28 29 30 31 32 33 34 35 36 37 39 40 41 42 43 44 45 46 47 (48) ]
CPU P-States [ 12 23 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 (48) ]
CPU P-States [ (12) 23 26 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 ]
CPU P-States [ (12) 22 23 26 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 ]
CPU P-States [ 12 22 23 24 26 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 (47) 48 ]
CPU P-States [ (12) 20 22 23 24 26 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 ]
CPU P-States [ (12) 20 22 23 24 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 ]
CPU P-States [ (12) 19 20 22 23 24 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 ]
CPU P-States [ (12) 19 20 21 22 23 24 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 ]
CPU P-States [ (12) 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 ]
CPU P-States [ (12) 17 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 ]
CPU P-States [ (12) 14 17 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 ]
CPU P-States [ (12) 14 16 17 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 ]
CPU P-States [ (12) 14 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 ]
CPU P-States [ (12) 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 ]
CPU C3-Cores [ 0 1 7 ]
CPU C3-Cores [ 0 1 6 7 ]
CPU P-States [ (12) 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 ]

[Guide] Mac OSX 10.12 and 10.13 with X99 Broadwell-E family and Haswell-E family

Recommended Posts

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites