[Guide] Mac OSX 10.12 and 10.13 with X99 Broadwell-E family and Haswell-E family

[Fljagd]

not for me..same bios but "only" 64Gb with correct frequency

How many  Ram Slot  have You?

[Fljagd]

Balamut & Fijagd

I see all 128 Gb with Slice prepared boot efi

cool

[nmano]

@nmano

I bought this processor from ebay > http://ark.intel.com/products/81905/Intel-Xeon-Processor-E5-2658-v3-30M-Cache-2_20-GHz

What do you think will be able to do him to work in the osX ?

Can count on your help with this ?

 

Thanks bro.

ES-engineering sample

Check first  ES or not

If you have Gigabyte motherboard +update bios maybe work.

[Balamut]

If under windows, get CPUID it should say ES at the end of the CPU name if its a Engineering sample.

Getting closer and closer

 

Balamut & Fijagd

I see all 128 Gb with Slice prepared boot efi

[scarface9x]

Hi Scarface9x

#Gigabyte GA-X99-SLI

#I set dsdt HDEF layout ID-1

#Test and Feedback

 

Hi nmano,

 

I have working sound now but for some reason i have a slight hissing background noise.

 

I had a custom ssdt with fakecpuid for OC but it looks like it's not OC'ing anymore max speed is showing 3.68ghz.

 

Other than that looks everything fine for my noob eye. 

 

Thank you very much. 

[ekwipt]

Hi nmano,

 

I have working sound now but for some reason i have a slight hissing background noise.

 

I had a custom ssdt with fakecpuid for OC but it looks like it's not OC'ing anymore max speed is showing 3.68ghz.

 

Other than that looks everything fine for my noob eye. 

 

Thank you very much. 

 

I'm using voodoohda for my sound and get no hiss, so maybe you want to try that instead

[Fergarth]

Hi nmano,

I had to leave the Betas and return to the official version of Sierra 10.12 because there is no support for Nvidia Beta versions that followed. I took and did a fresh install with your XCPM 10.12 Haswell-E config.plist and your patchs, that works very well in my new installation. I always used the voodooHDA for ALC1150 and always worked without stress, but this time i wanted to try AppleHDA. I tried audio_cloverALC-120 script, but despite the system to recognize the audio, to be able to control the volume and select the various outputs and inputs, cannot hear any sound. Basing me in your wisdom, will you can give me a help again? Is something missing in my DSDT? It will be something I can do or change?
Thanks and greetings nmano.

[scottlh]

Hi nmano,

 

I have working sound now but for some reason i have a slight hissing background noise.

 

I had a custom ssdt with fakecpuid for OC but it looks like it's not OC'ing anymore max speed is showing 3.68ghz.

 

Other than that looks everything fine for my noob eye. 

 

Thank you very much. 

I had hiss in the output as well - try turning down the INPUT level

Go to System Preferences -> Sound -> Input

And turn down the input volume

Worked for me on the Asus X99 Deluxe

[Fergarth]

I had hiss in the output as well - try turning down the INPUT level

Go to System Preferences -> Sound -> Input

And turn down the input volume

Worked for me on the Asus X99 Deluxe

 

It was precisely what I did to eliminate background noise when i used voodooHDA 2.88, edited the values in info.plist kext

[Fljagd]

Hello,

Have to install a new Hack with El Capitan

Asus X99-II

Intel Xeon E5-2609 V4 1.7 GHz  (8 cores-8 threards)

G.SKILL Ripjaws V Series 32GB (2 x 16GB)

Quadro Fx 4800

 

I have in

 

-drivers64UEFI: original

DataHubDxe-64.efi

EmuVariableUefi-64.efi

FSInject-64.efi

HFSPlus.efi

OsxAptioFixDrv-64.efi

OsxFatBinaryDrv-64.efi

PartitionDxe-64.efi

 

in kext 10.11 should I put

Voodootscsync Y/N?

Nulcpumanager Y/N?

Other?

 

For the config.plist

FakeCPUID? which?

Check in Kernel and Kext Patches KernelHaswellE

Thank

Who wants to share his EFI

It was precisely what I did to eliminate background noise when i used voodooHDA 2.88, edited the values in info.plist kext

Slice output to the new version 2.8.9
No background noise

[Fljagd]

Hi

valid for el capitan and macOs sierra (V4 cpu type)

Only proper byte patching

You should't have need of nullcpupm and Voodootscsync to start

You need only of fakecpuid and reboot fix from piker alpha you can find by yourself following this:

3 minutes ago

 

it's very informative thank you

I did some tests, I have adjusted my patch on my X99 5820K

I have different results depending on the adjustment of config.plist

 

Settings:

------------------------------------------

logMSRs..................................: 1

logIGPU..................................: 0

logCStates...............................: 1

logIPGStyle..............................: 1

 

Warning: Clover hw.busfrequency error detected : 17d78400

InitialTSC...............................: 0x447feb48839 (142 MHz)

MWAIT C-States...........................: 8480

 

Processor Brandstring....................: Intel® Core i7-5820K CPU @ 3.30GHz

 

Processor Signature..................... : 0x306F2

------------------------------------------

- Family............................... : 6

- Stepping............................. : 2

- Model................................ : 0x3F (63)

 

Model Specific Registers (MSRs)

------------------------------------------

 

MSR_CORE_THREAD_COUNT............(0x35) : 0xFFFFFF803B7ECD00

------------------------------------------

- Core Count........................... : 6

- Thread Count......................... : 12

 

MSR_PLATFORM_INFO................(0xCE) : 0x20080C3BF3812100

------------------------------------------

- Maximum Non-Turbo Ratio.............. : 0x21 (3300 MHz)

- Ratio Limit for Turbo Mode........... : 1 (programmable)

- TDP Limit for Turbo Mode............. : 1 (programmable)

- Low Power Mode Support............... : 1 (LPM supported)

- Number of ConfigTDP Levels........... : 1 (additional TDP level(s) available)

- Maximum Efficiency Ratio............. : 12

- Minimum Operating Ratio.............. : 8

 

MSR_PMG_CST_CONFIG_CONTROL.......(0xE2) : 0x8400

------------------------------------------

- I/O MWAIT Redirection Enable......... : 1 (enabled, IO read of MSR(0xE4) mapped to MWAIT)

- CFG Lock............................. : 1 (MSR locked until next reset)

- C3 State Auto Demotion............... : 0 (disabled/unsupported)

- C1 State Auto Demotion............... : 0 (disabled/unsupported)

- C3 State Undemotion.................. : 0 (disabled/unsupported)

- C1 State Undemotion.................. : 0 (disabled/unsupported)

- Package C-State Auto Demotion........ : 0 (disabled/unsupported)

- Package C-State Undemotion........... : 0 (disabled/unsupported)

 

MSR_PMG_IO_CAPTURE_BASE..........(0xE4) : 0x10414

------------------------------------------

- LVL_2 Base Address................... : 0x414

- C-state Range........................ : 1 (C6 is the max C-State to include)

 

IA32_MPERF.......................(0xE7) : 0x98C603E59

IA32_APERF.......................(0xE8) : 0xC0AB0BDC2

 

MSR_FLEX_RATIO...................(0x194) : 0xE0000

------------------------------------------

 

MSR_IA32_PERF_STATUS.............(0x198) : 0x289700002B00

------------------------------------------

- Current Performance State Value...... : 0x2B00 (4300 MHz)

 

MSR_IA32_PERF_CONTROL............(0x199) : 0xC00

------------------------------------------

- Target performance State Value....... : 0xC00 (1200 MHz)

- Intel Dynamic Acceleration........... : 0 (IDA engaged)

 

IA32_CLOCK_MODULATION............(0x19A) : 0x0

IA32_THERM_STATUS................(0x19C) : 0x88470000

 

IA32_MISC_ENABLES................(0x1A0) : 0x840089

------------------------------------------

- Fast-Strings......................... : 1 (enabled)

- Automatic Thermal Control Circuit.... : 1 (enabled)

- Performance Monitoring............... : 1 (available)

- Enhanced Intel SpeedStep Technology.. : 0 (disabled)

 

MSR_TEMPERATURE_TARGET...........(0x1A2) : 0x690A00

------------------------------------------

- Turbo Attenuation Units.............. : 0

- Temperature Target................... : 105

- TCC Activation Offset................ : 0

 

MSR_MISC_PWR_MGMT................(0x1AA) : 0x400000

------------------------------------------

- EIST Hardware Coordination........... : 0 (enabled)

 

MSR_TURBO_RATIO_LIMIT............(0x1AD) : 0x22222B2B2B2B2B2B

------------------------------------------

 

IA32_ENERGY_PERF_BIAS............(0x1B0) : 0x0

 

MSR_POWER_CTL....................(0x1FC) : 0x2904005B

------------------------------------------

- C1E Enable............................: 1

 

MSR_RAPL_POWER_UNIT..............(0x606) : 0xA0E03

------------------------------------------

- Power Units.......................... : 3 (1/8 Watt)

- Energy Status Units.................. : 14 (61 micro-Joules)

- Time Units .......................... : 10 (976.6 micro-Seconds)

 

MSR_PKG_POWER_LIMIT..............(0x610) : 0x7FFF80015FFF8

------------------------------------------

- Package Power Limit #1............... : 4095 Watt

- Enable Power Limit #1................ : 1 (enabled)

- Package Clamping Limitation #1....... : 1 (allow going below OS-requested P/T state during Time Window for Power Limit #1)

- Time Window for Power Limit #1....... : 10 (2560 milli-Seconds)

- Package Power Limit #2............... : 4095 Watt

- Enable Power Limit #2................ : 1 (enabled)

- Package Clamping Limitation #2....... : 1 (allow going below OS-requested P/T state setting Time Window for Power Limit #2)

- Time Window for Power Limit #2....... : 3 (20 milli-Seconds)

- Lock................................. : 0 (MSR not locked)

 

MSR_PKG_ENERGY_STATUS............(0x611) : 0x2EF2F6

------------------------------------------

- Total Energy Consumed................ : 187 Joules (Watt = Joules / seconds)

 

MSR_PKG_POWER_INFO...............(0x614) : 0x1280460

------------------------------------------

- Thermal Spec Power................... : 140 Watt

- Minimum Power........................ : 0

- Maximum Power........................ : 0

- Maximum Time Window.................. : 0

 

MSR_PP0_POWER_LIMIT..............(0x638) : 0x0

 

MSR_PP0_ENERGY_STATUS............(0x639) : 0x0

 

MSR_TURBO_ACTIVATION_RATIO.......(0x64C) : 0x0

 

MSR_CONFIG_TDP_NOMINAL...........(0x648) : 0x21

MSR_CONFIG_TDP_LEVEL1............(0x649) : 0x940000001E0460

MSR_CONFIG_TDP_LEVEL2............(0x64a) : 0x94000000000000

MSR_CONFIG_TDP_CONTROL...........(0x64b) : 0x0

MSR_TURBO_ACTIVATION_RATIO.......(0x64c) : 0x0

MSR_PKGC6_IRTL...................(0x60b) : 0x0

MSR_PKG_C2_RESIDENCY.............(0x60d) : 0x0

MSR_PKG_C6_RESIDENCY.............(0x3f9) : 0x0

 

IA32_TSC_DEADLINE................(0x6E0) : 0x44802565354

 

CPU Ratio Info:

------------------------------------------

Base Clock Frequency (BLCK)............. : 100 MHz

Maximum Efficiency Ratio/Frequency.......: 12 (1200 MHz)

Maximum non-Turbo Ratio/Frequency........: 33 (3300 MHz)

Maximum Turbo Ratio/Frequency............: 43 (4300 MHz)

P-State ratio * 100 = Frequency in MHz

------------------------------------------

CPU P-States [ (12) 42 43 ]

CPU C6-Cores [ 0 2 4 6 8 10 ]

CPU P-States [ (12) 27 42 43 ]

CPU P-States [ (12) 27 29 42 43 ]

CPU P-States [ (12) 27 29 30 42 43 ]

CPU P-States [ (12) 27 29 30 41 42 43 ]

CPU C6-Cores [ 0 1 2 4 6 8 10 ]

CPU P-States [ 12 27 29 30 31 41 42 (43) ]

CPU C6-Cores [ 0 1 2 4 6 8 10 11 ]

CPU P-States [ (12) 27 29 30 31 34 41 42 43 ]

CPU P-States [ (12) 27 29 30 31 34 39 41 42 43 ]

CPU P-States [ (12) 27 29 30 31 32 34 39 41 42 43 ]

CPU P-States [ (12) 27 29 30 31 32 34 35 39 41 42 43 ]

CPU P-States [ (12) 27 29 30 31 32 34 35 37 39 41 42 43 ]

CPU P-States [ 12 27 29 30 31 32 34 35 37 39 40 41 42 (43) ]

CPU C6-Cores [ 0 1 2 4 6 8 9 10 11 ]

CPU P-States [ (12) 27 28 29 30 31 32 34 35 37 39 40 41 42 43 ]

CPU P-States [ 12 24 27 28 29 30 31 32 34 35 37 39 40 41 42 (43) ]

CPU C6-Cores [ 0 1 2 4 6 7 8 9 10 11 ]

CPU C6-Cores [ 0 1 2 4 5 6 7 8 9 10 11 ]

CPU P-States [ (12) 24 27 28 29 30 31 32 33 34 35 37 39 40 41 42 43 ]

CPU P-States [ (12) 24 27 28 29 30 31 32 33 34 35 36 37 39 40 41 42 43 ]

CPU P-States [ (12) 24 25 27 28 29 30 31 32 33 34 35 36 37 39 40 41 42 43 ]

CPU P-States [ 12 23 24 25 27 28 29 30 31 32 33 34 35 36 37 39 40 41 42 (43) ]

 

 

 

Settings:

------------------------------------------

logMSRs..................................: 1

logIGPU..................................: 0

logCStates...............................: 1

logIPGStyle..............................: 1

 

Warning: Clover hw.busfrequency error detected : 17d78400

InitialTSC...............................: 0x565648cc308 (179 MHz)

MWAIT C-States...........................: 8480

 

Processor Brandstring....................: Intel® Core i7-5820K CPU @ 3.30GHz

 

Processor Signature..................... : 0x306F2

------------------------------------------

- Family............................... : 6

- Stepping............................. : 2

- Model................................ : 0x3F (63)

 

Model Specific Registers (MSRs)

------------------------------------------

 

MSR_CORE_THREAD_COUNT............(0x35) : 0xFFFFFF8034E3B100

------------------------------------------

- Core Count........................... : 6

- Thread Count......................... : 12

 

MSR_PLATFORM_INFO................(0xCE) : 0x20080C3BF3812100

------------------------------------------

- Maximum Non-Turbo Ratio.............. : 0x21 (3300 MHz)

- Ratio Limit for Turbo Mode........... : 1 (programmable)

- TDP Limit for Turbo Mode............. : 1 (programmable)

- Low Power Mode Support............... : 1 (LPM supported)

- Number of ConfigTDP Levels........... : 1 (additional TDP level(s) available)

- Maximum Efficiency Ratio............. : 12

- Minimum Operating Ratio.............. : 8

 

MSR_PMG_CST_CONFIG_CONTROL.......(0xE2) : 0x8400

------------------------------------------

- I/O MWAIT Redirection Enable......... : 1 (enabled, IO read of MSR(0xE4) mapped to MWAIT)

- CFG Lock............................. : 1 (MSR locked until next reset)

- C3 State Auto Demotion............... : 0 (disabled/unsupported)

- C1 State Auto Demotion............... : 0 (disabled/unsupported)

- C3 State Undemotion.................. : 0 (disabled/unsupported)

- C1 State Undemotion.................. : 0 (disabled/unsupported)

- Package C-State Auto Demotion........ : 0 (disabled/unsupported)

- Package C-State Undemotion........... : 0 (disabled/unsupported)

 

MSR_PMG_IO_CAPTURE_BASE..........(0xE4) : 0x10414

------------------------------------------

- LVL_2 Base Address................... : 0x414

- C-state Range........................ : 1 (C6 is the max C-State to include)

 

IA32_MPERF.......................(0xE7) : 0x975C8A39B

IA32_APERF.......................(0xE8) : 0xBBB9EE5F6

 

MSR_FLEX_RATIO...................(0x194) : 0xE0000

------------------------------------------

 

MSR_IA32_PERF_STATUS.............(0x198) : 0x288400002B00

------------------------------------------

- Current Performance State Value...... : 0x2B00 (4300 MHz)

 

MSR_IA32_PERF_CONTROL............(0x199) : 0x2B00

------------------------------------------

- Target performance State Value....... : 0x2B00 (4300 MHz)

- Intel Dynamic Acceleration........... : 0 (IDA engaged)

 

IA32_CLOCK_MODULATION............(0x19A) : 0x0

IA32_THERM_STATUS................(0x19C) : 0x88470000

 

IA32_MISC_ENABLES................(0x1A0) : 0x840089

------------------------------------------

- Fast-Strings......................... : 1 (enabled)

- Automatic Thermal Control Circuit.... : 1 (enabled)

- Performance Monitoring............... : 1 (available)

- Enhanced Intel SpeedStep Technology.. : 0 (disabled)

 

MSR_TEMPERATURE_TARGET...........(0x1A2) : 0x690A00

------------------------------------------

- Turbo Attenuation Units.............. : 0

- Temperature Target................... : 105

- TCC Activation Offset................ : 0

 

MSR_MISC_PWR_MGMT................(0x1AA) : 0x400000

------------------------------------------

- EIST Hardware Coordination........... : 0 (enabled)

 

MSR_TURBO_RATIO_LIMIT............(0x1AD) : 0x22222B2B2B2B2B2B

------------------------------------------

 

IA32_ENERGY_PERF_BIAS............(0x1B0) : 0x0

 

MSR_POWER_CTL....................(0x1FC) : 0x2904005B

------------------------------------------

- C1E Enable............................: 1

 

MSR_RAPL_POWER_UNIT..............(0x606) : 0xA0E03

------------------------------------------

- Power Units.......................... : 3 (1/8 Watt)

- Energy Status Units.................. : 14 (61 micro-Joules)

- Time Units .......................... : 10 (976.6 micro-Seconds)

 

MSR_PKG_POWER_LIMIT..............(0x610) : 0x7FFF80015FFF8

------------------------------------------

- Package Power Limit #1............... : 4095 Watt

- Enable Power Limit #1................ : 1 (enabled)

- Package Clamping Limitation #1....... : 1 (allow going below OS-requested P/T state during Time Window for Power Limit #1)

- Time Window for Power Limit #1....... : 10 (2560 milli-Seconds)

- Package Power Limit #2............... : 4095 Watt

- Enable Power Limit #2................ : 1 (enabled)

- Package Clamping Limitation #2....... : 1 (allow going below OS-requested P/T state setting Time Window for Power Limit #2)

- Time Window for Power Limit #2....... : 3 (20 milli-Seconds)

- Lock................................. : 0 (MSR not locked)

 

MSR_PKG_ENERGY_STATUS............(0x611) : 0x1AD707

------------------------------------------

- Total Energy Consumed................ : 107 Joules (Watt = Joules / seconds)

 

MSR_PKG_POWER_INFO...............(0x614) : 0x1280460

------------------------------------------

- Thermal Spec Power................... : 140 Watt

- Minimum Power........................ : 0

- Maximum Power........................ : 0

- Maximum Time Window.................. : 0

 

MSR_PP0_POWER_LIMIT..............(0x638) : 0x0

 

MSR_PP0_ENERGY_STATUS............(0x639) : 0x0

 

MSR_TURBO_ACTIVATION_RATIO.......(0x64C) : 0x0

 

MSR_CONFIG_TDP_NOMINAL...........(0x648) : 0x21

MSR_CONFIG_TDP_LEVEL1............(0x649) : 0x940000001E0460

MSR_CONFIG_TDP_LEVEL2............(0x64a) : 0x94000000000000

MSR_CONFIG_TDP_CONTROL...........(0x64b) : 0x0

MSR_TURBO_ACTIVATION_RATIO.......(0x64c) : 0x0

MSR_PKGC6_IRTL...................(0x60b) : 0x0

MSR_PKG_C2_RESIDENCY.............(0x60d) : 0x0

MSR_PKG_C6_RESIDENCY.............(0x3f9) : 0x0

 

IA32_TSC_DEADLINE................(0x6E0) : 0x565669F1F6E

 

CPU Ratio Info:

------------------------------------------

Base Clock Frequency (BLCK)............. : 100 MHz

Maximum Efficiency Ratio/Frequency.......: 12 (1200 MHz)

Maximum non-Turbo Ratio/Frequency........: 33 (3300 MHz)

Maximum Turbo Ratio/Frequency............: 43 (4300 MHz)

P-State ratio * 100 = Frequency in MHz

------------------------------------------

CPU P-States [ (12) 40 43 ]

CPU C6-Cores [ 0 2 4 6 8 10 ]

CPU P-States [ (12) 29 40 43 ]

CPU P-States [ 12 29 40 41 (43) ]

CPU C6-Cores [ 0 1 2 4 6 8 10 ]

CPU P-States [ 12 29 31 40 41 (43) ]

CPU C6-Cores [ 0 1 2 4 6 8 9 10 ]

CPU C6-Cores [ 0 1 2 4 6 7 8 9 10 11 ]

CPU P-States [ 12 29 31 37 40 41 (43) ]

CPU C6-Cores [ 0 1 2 4 5 6 7 8 9 10 11 ]

CPU P-States [ (12) 29 31 36 37 40 41 43 ]

CPU P-States [ 12 29 31 34 36 37 40 41 (43) ]

CPU P-States [ 12 28 29 31 34 36 37 40 41 (43) ]

CPU P-States [ 12 21 28 29 31 34 36 37 40 41 (43) ]

CPU P-States [ (12) 21 28 29 31 32 34 36 37 40 41 43 ]

CPU P-States [ (12) 21 28 29 30 31 32 34 36 37 40 41 43 ]

CPU P-States [ 12 21 28 29 30 31 32 34 35 36 37 40 41 (43) ]

CPU P-States [ 12 21 22 28 29 30 31 32 34 35 36 37 40 41 (43) ]

CPU P-States [ (12) 21 22 28 29 30 31 32 33 34 35 36 37 40 41 43 ]

CPU C6-Cores [ 0 1 2 3 4 5 6 7 8 9 10 11 ]

CPU P-States [ (12) 21 22 25 28 29 30 31 32 33 34 35 36 37 40 41 43 ]

CPU P-States [ (12) 21 22 25 26 28 29 30 31 32 33 34 35 36 37 40 41 43 ]

CPU P-States [ (12) 21 22 24 25 26 28 29 30 31 32 33 34 35 36 37 40 41 43 ]

CPU P-States [ (12) 21 22 24 25 26 27 28 29 30 31 32 33 34 35 36 37 40 41 43 ]

CPU P-States [ 12 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 40 41 (43) ]

 

 

But one thing is constant

- CFG Lock............................. : 1 (MSR locked until next reset)

I have not found the trick to unlock

[SammlerG]

But one thing is constant

- CFG Lock............................. : 1 (MSR locked until next reset)

I have not found the trick to unlock

The Bios is locked. 8400 shows this.

 

Unlocked it should show msr 0xe2 400/401/402/403 for Haswell-E.

 

AppleIntelInfo.kext v1.8c Copyright © 2012-2016 Pike R. Alpha. All rights reserved

Settings:
------------------------------------------
logMSRs..................................: 1
logIGPU..................................: 0
logCStates...............................: 1
logIPGStyle..............................: 1
InitialTSC...............................: 0xbf501eaca3c (375 MHz)
MWAIT C-States...........................: 8480

Processor Brandstring....................: Intel(R) Core(TM) i7-5930K CPU @ 3.50GHz

Processor Signature..................... : 0x306F2
------------------------------------------
 - Family............................... : 6
 - Stepping............................. : 2
 - Model................................ : 0x3F (63)

Model Specific Registers (MSRs)
------------------------------------------

MSR_CORE_THREAD_COUNT............(0x35)  : 0xFFFFFF805BB06E00
------------------------------------------
 - Core Count........................... : 6
 - Thread Count......................... : 12

MSR_PLATFORM_INFO................(0xCE)  : 0x20080C3BF3812300
------------------------------------------
 - Maximum Non-Turbo Ratio.............. : 0x23 (3500 MHz)
 - Ratio Limit for Turbo Mode........... : 1 (programmable)
 - TDP Limit for Turbo Mode............. : 1 (programmable)
 - Low Power Mode Support............... : 1 (LPM supported)
 - Number of ConfigTDP Levels........... : 1 (additional TDP level(s) available)
 - Maximum Efficiency Ratio............. : 12
 - Minimum Operating Ratio.............. : 8

MSR_PMG_CST_CONFIG_CONTROL.......(0xE2)  : 0x7E000406
------------------------------------------
 - I/O MWAIT Redirection Enable......... : 1 (enabled, IO read of MSR(0xE4) mapped to MWAIT)
 - CFG Lock............................. : 0 (MSR not locked)
 - C3 State Auto Demotion............... : 1 (enabled)
 - C1 State Auto Demotion............... : 1 (enabled)
 - C3 State Undemotion.................. : 1 (enabled)
 - C1 State Undemotion.................. : 1 (enabled)
 - Package C-State Auto Demotion........ : 1 (enabled)
 - Package C-State Undemotion........... : 1 (enabled)

MSR_PMG_IO_CAPTURE_BASE..........(0xE4)  : 0x10414
------------------------------------------
 - LVL_2 Base Address................... : 0x414
 - C-state Range........................ : 1 (C6 is the max C-State to include)

IA32_MPERF.......................(0xE7)  : 0xD31A8560D
IA32_APERF.......................(0xE8)  : 0x1043047C4F

MSR_FLEX_RATIO...................(0x194) : 0xE0000
------------------------------------------

MSR_IA32_PERF_STATUS.............(0x198) : 0x2A4500002E00
------------------------------------------
 - Current Performance State Value...... : 0x2E00 (4600 MHz)

MSR_IA32_PERF_CONTROL............(0x199) : 0x3000
------------------------------------------
 - Target performance State Value....... : 0x3000 (4800 MHz)
 - Intel Dynamic Acceleration........... : 0 (IDA engaged)

IA32_CLOCK_MODULATION............(0x19A) : 0x0
IA32_THERM_STATUS................(0x19C) : 0x88490000

IA32_MISC_ENABLES................(0x1A0) : 0x840089
------------------------------------------
 - Fast-Strings......................... : 1 (enabled)
 - Automatic Thermal Control Circuit.... : 1 (enabled)
 - Performance Monitoring............... : 1 (available)
 - Enhanced Intel SpeedStep Technology.. : 0 (disabled)

MSR_TEMPERATURE_TARGET...........(0x1A2) : 0x640A00
------------------------------------------
 - Turbo Attenuation Units.............. : 0 
 - Temperature Target................... : 100
 - TCC Activation Offset................ : 0

MSR_MISC_PWR_MGMT................(0x1AA) : 0x400000
------------------------------------------
 - EIST Hardware Coordination........... : 0 (enabled)

MSR_TURBO_RATIO_LIMIT............(0x1AD) : 0x24242E2E2E2F2F30
------------------------------------------

IA32_ENERGY_PERF_BIAS............(0x1B0) : 0x1
------------------------------------------
 - Power Policy Preference...............: 1 (highest performance)

MSR_POWER_CTL....................(0x1FC) : 0x2904005B
------------------------------------------
 - C1E Enable............................: 1

MSR_RAPL_POWER_UNIT..............(0x606) : 0xA0E03
------------------------------------------
 - Power Units.......................... : 3 (1/8 Watt)
 - Energy Status Units.................. : 14 (61 micro-Joules)
 - Time Units .......................... : 10 (976.6 micro-Seconds)

MSR_PKG_POWER_LIMIT..............(0x610) : 0x7869000158640
------------------------------------------
 - Package Power Limit #1............... : 200 Watt
 - Enable Power Limit #1................ : 1 (enabled)
 - Package Clamping Limitation #1....... : 1 (allow going below OS-requested P/T state during Time Window for Power Limit #1)
 - Time Window for Power Limit #1....... : 10 (2560 milli-Seconds)
 - Package Power Limit #2............... : 210 Watt
 - Enable Power Limit #2................ : 1 (enabled)
 - Package Clamping Limitation #2....... : 1 (allow going below OS-requested P/T state setting Time Window for Power Limit #2)
 - Time Window for Power Limit #2....... : 3 (20 milli-Seconds)
 - Lock................................. : 0 (MSR not locked)

MSR_PKG_ENERGY_STATUS............(0x611) : 0x42B45D1
------------------------------------------
 - Total Energy Consumed................ : 4269 Joules (Watt = Joules / seconds)

MSR_PKG_POWER_INFO...............(0x614) : 0x1280460
------------------------------------------
 - Thermal Spec Power................... : 140 Watt
 - Minimum Power........................ : 0
 - Maximum Power........................ : 0
 - Maximum Time Window.................. : 0

MSR_PP0_POWER_LIMIT..............(0x638) : 0x0

MSR_PP0_ENERGY_STATUS............(0x639) : 0x0

MSR_TURBO_ACTIVATION_RATIO.......(0x64C) : 0x0

MSR_CONFIG_TDP_NOMINAL...........(0x648) : 0x23
MSR_CONFIG_TDP_LEVEL1............(0x649) : 0x94000000200460
MSR_CONFIG_TDP_LEVEL2............(0x64a) : 0x94000000000000
MSR_CONFIG_TDP_CONTROL...........(0x64b) : 0x0
MSR_TURBO_ACTIVATION_RATIO.......(0x64c) : 0x0
MSR_PKGC6_IRTL...................(0x60b) : 0x0
MSR_PKG_C2_RESIDENCY.............(0x60d) : 0x333402572B
MSR_PKG_C3_RESIDENCY.............(0x3f8) : 0x0
MSR_PKG_C6_RESIDENCY.............(0x3f9) : 0x3BF1978448

IA32_TSC_DEADLINE................(0x6E0) : 0xBF50532F11E

CPU Ratio Info:
------------------------------------------
Base Clock Frequency (BLCK)............. : 100 MHz
Maximum Efficiency Ratio/Frequency.......: 12 (1200 MHz)
Maximum non-Turbo Ratio/Frequency........: 35 (3500 MHz)
Maximum Turbo Ratio/Frequency............: 48 (4800 MHz)
P-State ratio * 100 = Frequency in MHz
------------------------------------------
CPU P-States [ (12) 35 46 ]
CPU C3-Cores [ 1 7 ]
CPU C6-Cores [ 1 2 4 6 8 10 ]
CPU P-States [ (12) 18 35 46 ]
CPU C3-Cores [ 1 6 7 ]
CPU C6-Cores [ 1 2 4 6 8 9 10 ]
CPU P-States [ (12) 18 33 35 46 ]
CPU C3-Cores [ 0 1 6 7 ]
CPU C6-Cores [ 1 2 4 6 8 9 10 11 ]
CPU P-States [ (12) 18 27 33 35 46 ]
CPU P-States [ 12 18 27 33 35 46 (48) ]
CPU C6-Cores [ 0 1 2 3 4 5 6 7 8 9 10 11 ]
CPU P-States [ (12) 18 27 28 33 35 46 48 ]
CPU P-States [ 12 18 27 28 33 35 41 46 (47) 48 ]
CPU P-States [ 12 18 20 27 28 33 35 41 46 (47) 48 ]
CPU P-States [ (12) 18 20 27 28 30 33 35 41 46 47 48 ]
CPU P-States [ (12) 18 20 27 28 30 33 35 41 43 46 47 48 ]
CPU P-States [ 12 18 20 27 28 29 30 33 35 41 43 46 (47) 48 ]
CPU P-States [ (12) 18 20 26 27 28 29 30 33 35 41 43 46 47 48 ]
CPU P-States [ 12 18 20 26 27 28 29 30 33 35 41 43 45 46 47 (48) ]
CPU P-States [ 12 18 20 26 27 28 29 30 33 35 37 41 43 45 46 (47) 48 ]
CPU P-States [ (12) 18 19 20 26 27 28 29 30 33 35 37 41 43 45 46 47 48 ]
CPU P-States [ 12 18 19 20 26 27 28 29 30 33 35 37 39 41 43 45 46 (47) 48 ]
CPU P-States [ (12) 18 19 20 22 26 27 28 29 30 33 35 37 39 41 43 45 46 47 48 ]
CPU P-States [ (12) 18 19 20 22 25 26 27 28 29 30 33 35 37 39 41 43 45 46 47 48 ]
CPU P-States [ (12) 17 18 19 20 22 25 26 27 28 29 30 33 35 37 39 41 43 45 46 47 48 ]
CPU P-States [ (12) 17 18 19 20 22 25 26 27 28 29 30 31 33 35 37 39 41 43 45 46 47 48 ]
CPU P-States [ 12 17 18 19 20 22 24 25 26 27 28 29 30 31 33 35 37 39 41 43 45 46 47 (48) ]
CPU P-States [ 12 17 18 19 20 22 24 25 26 27 28 29 30 31 33 35 37 39 41 42 43 45 46 (47) 48 ]
CPU P-States [ 12 17 18 19 20 22 24 25 26 27 28 29 30 31 33 35 37 38 39 41 42 43 45 46 (47) 48 ]
CPU P-States [ (12) 17 18 19 20 22 23 24 25 26 27 28 29 30 31 33 35 37 38 39 41 42 43 45 46 47 48 ]
CPU P-States [ (12) 17 18 19 20 22 23 24 25 26 27 28 29 30 31 33 35 37 38 39 40 41 42 43 45 46 47 48 ]
CPU P-States [ (12) 17 18 19 20 22 23 24 25 26 27 28 29 30 31 33 34 35 37 38 39 40 41 42 43 45 46 47 48 ]
CPU P-States [ (12) 17 18 19 20 22 23 24 25 26 27 28 29 30 31 33 34 35 37 38 39 40 41 42 43 44 45 46 47 48 ]
CPU P-States [ 12 17 18 19 20 22 23 24 25 26 27 28 29 30 31 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 (48) ]
CPU C3-Cores [ 0 1 6 7 10 ]
CPU P-States [ 12 17 18 19 20 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 (47) 48 ]
CPU C3-Cores [ 0 1 6 7 10 11 ]
CPU P-States [ 12 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 (48) ]
CPU P-States [ (12) 15 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 ]
CPU P-States [ (12) 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 ]
CPU P-States [ (12) 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 ]
CPU P-States [ 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 (48) ]

[Fljagd]

 

The Bios is locked. 8400 shows this.

 

Unlocked it should show msr 0xe2 400/401/402/403 for Haswell-E.

 

yes, but how?

[SammlerG]

with El Capitan you can use Clover patches, then xcpm doesn´t write to msr 0xE2.

 

With msr 0xE2 you can set C-States, if your Bios is locked, C-States can only set from your Bios settings.

 

 

With an unlocked msr 0xE2, xcpm can write direct to msr 0xE2 and sets C-States.

 

You can patch your Bios with UEFI Tool to unlock msr 0xE2, or test some other Bios files.

[Fljagd]

with El Capitan you can use Clover patches, then xcpm doesn´t write to msr 0xE2.

 

With msr 0xE2 you can set C-States, if your Bios is locked, C-States can only set from your Bios settings.

 

 

With an unlocked msr 0xE2, xcpm can write direct to msr 0xE2 and sets C-States.

 

You can patch your Bios with UEFI Tool to unlock msr 0xE2, or test some other Bios files.

Thank I will test uefitool

[Fljagd]

What should I look for, and replace it with what?

Thanks

X99-A-ASUS-3402.CAP.zip

[SammlerG]

with newest ASUS Bios,i would search for 0FBA6C24400F

 

and replace with 0FBA7424400F

[Fljagd]

Thank 

I will test now

[SammlerG]

yes, 200W is set manually.

So i get 4.6 GHz with 6 core 100& load, and 4.7 with 3 core, 4.8 with 1 core.

My system is water-cooled, max. temp is 67°C 

[Fljagd]

@Fijagd

 

Use uefipatch with patches.txt

 

it is an automatic process that you can do via terminal

Then you have to flash with flashback button because bios has not a valid checksum

 

This is your patched Bios with MSR 0xE2 unlocked

 

But you should try to build by yourself

it does not work

Explain the procedure me because I'm lost

[thenightflyer]

it does not work

Explain the procedure me because I'm lost

You are not able to flash or what?

[thenightflyer]

http://event.asus.com/2012/mb/USB_BIOS_Flashback_GUIDE/

[Fljagd]

You are not able to flash or what?

impossible to flash the bios

as well not the USB key that by the bios utility

Explain the procedure to modded the bios

Thank

[Fljagd]

yes I'm ok about the procedure to flash my bios with usb stick

but nothing.

Why do you rename R5E.cap?

[Balamut]

for you should be X99A.CAP

 

but I repeat myself be careful

 

ps

with flashback flashing you have some rules... :-))

one it is the right name to put

 

It is different from board to board

Ok?

Just a word of advice.

 

On the X99 boards you sometimes have to downgrade to be able to flashback to the latest e.g.

 

If your bios is 1002 you need to downgrade to 1001 so you can flashback 1002 back to the bios.

 

Again this in some rare cases.