Bootloader Build_Clover.command, another Script to build standard Clover (or customized)

Matgen84 · September 19, 2018

3 minutes ago, camillionario said:

Will there be a script to build Clover with UDK 2018 ?. Thank you

Here is. You will have to modify it according to your specificities

camillionario · September 19, 2018

20 minutes ago, Matgen84 said:

Aquí está. Tendrás que modificarlo de acuerdo con tus especificidades

Did's Build_Clover.command

Thank you, although I'm not sure what I should modify. I followed this guide to build Clover.

Matgen84 · September 19, 2018

25 minutes ago, camillionario said:

Thank you, although I'm not sure what I should modify. I followed this guide to build Clover.

Just try it Changes are optional. I only edited it for my personal additions

camillionario · September 19, 2018

1 hour ago, Matgen84 said:

Solo inténtalo Los cambios son opcionales. Solo lo edité para mis adiciones personales

I receive this error.

2060222349_Capturadepantalla2018-09-19alas16_07_00.png.3734a405c96ea3d90f7c89993263d65b.png

Matgen84 · September 19, 2018

15 minutes ago, camillionario said:

I receive this error.

Send in MP, please. Because is Off Topic

Slice · September 20, 2018

On 9/17/2018 at 10:46 PM, tluck said:

not sure if this right place to post ... I tested out Xcode 10 GM ....

FYI, the basic build went fine - but to make the pkg, had to make a few minor changes to CloverUpdater and CloverPrefpane to get them to build.

4 files in total

install-updater.sh - has a syntax error on the 2nd declare .

CloverPrefpane.m - need a one line code fix on a casting issue

project.pbxproj - just set DEPLOYMENT TARGET to 10.13 vs 10.6

this was just my quick and dirty way to get it done!

I built 4674 by Xcode10 without any modificatios in sources

Building CloverUpdater application...
[XCODE]
...
Building CloverPrefpane preference...
[XCODE]
================= Making all in boot1-install =================
...

tluck · September 21, 2018

22 hours ago, Slice said:
I built 4674 by Xcode10 without any modificatios in sources
Building CloverUpdater application...
[XCODE]
...
Building CloverPrefpane preference...
[XCODE]
================= Making all in boot1-install =================
...

yup. nevermind. got the same thing after i removed older SDKs. thanks

stinga11 · September 28, 2018

with the lastest udpdates on clover I cant compile.

================================================================================
Building Clover
                             <--------------------------------------------------
================================================================================
boot6
                             <--------------------------------------------------
TOOLCHAIN_DIR: /Users/exzo/src/opt/local
MTOC_PREFIX: /Users/exzo/src/opt/local/bin/
NASM_PREFIX: /Users/exzo/src/opt/local/bin/
NASM_VER: 2.13.03
Building from: /Users/exzo/src/edk2

Running edk2 build for CloverX64 using the command:
build  -D NO_GRUB_DRIVERS_EMBEDDED --conf=/Users/exzo/src/edk2/Conf -D USE_LOW_EBDA -p Clover/Clover.dsc  -a X64 -b RELEASE -t XCODE8 -n 13 

Build environment: Darwin-18.0.0-x86_64-i386-64bit
Build start time: 16:01:23, Sep.28 2018

WORKSPACE        = /Users/exzo/src/edk2
ECP_SOURCE       = /Users/exzo/src/edk2/EdkCompatibilityPkg
EDK_SOURCE       = /Users/exzo/src/edk2/EdkCompatibilityPkg
EFI_SOURCE       = /Users/exzo/src/edk2/EdkCompatibilityPkg
EDK_TOOLS_PATH   = /Users/exzo/src/edk2/BaseTools
CONF_PATH        = /Users/exzo/src/edk2/Conf


Architecture(s)  = X64
Build target     = RELEASE
Toolchain        = XCODE8

Active Platform          = /Users/exzo/src/edk2/Clover/Clover.dsc
Flash Image Definition   = /Users/exzo/src/edk2/Clover/Clover.fdf

Processing meta-data ................ done!
Building ... /Users/exzo/src/edk2/MdePkg/Library/BaseIoLibIntrinsic/BaseIoLibIntrinsic.inf [X64]
Building ... /Users/exzo/src/edk2/MdePkg/Library/BaseReportStatusCodeLibNull/BaseReportStatusCodeLibNull.inf [X64]
make: Nothing to be done for `tbuild'.
Building ... /Users/exzo/src/edk2/MdePkg/Library/BasePrintLib/BasePrintLib.inf [X64]
Building ... /Users/exzo/src/edk2/MdePkg/Library/BaseLib/BaseLib.inf [X64]
make: Nothing to be done for `tbuild'.
Building ... /Users/exzo/src/edk2/MdePkg/Library/BaseMemoryLib/BaseMemoryLib.inf [X64]
Building ... /Users/exzo/src/edk2/MdePkg/Library/BaseDebugLibNull/BaseDebugLibNull.inf [X64]
make: Nothing to be done for `tbuild'.
Building ... /Users/exzo/src/edk2/MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf [X64]
make: Nothing to be done for `tbuild'.
make: Nothing to be done for `tbuild'.
Building ... /Users/exzo/src/edk2/MdePkg/Library/BaseCpuLib/BaseCpuLib.inf [X64]
make: Nothing to be done for `tbuild'.
Building ... /Users/exzo/src/edk2/Clover/Library/OpensslLib/OpensslLibNull.inf [X64]
Building ... /Users/exzo/src/edk2/MdePkg/Library/UefiMemoryLib/UefiMemoryLib.inf [X64]
Building ... /Users/exzo/src/edk2/Clover/ShellPkg/Library/UefiShellDebug1CommandsLib/UefiShellDebug1CommandsLib.inf [X64]
[CC] BaseReportStatusCodeLib
Building ... /Users/exzo/src/edk2/Clover/ShellPkg/Library/UefiShellInstall1CommandsLib/UefiShellInstall1CommandsLib.inf [X64]
[SLINK] BaseReportStatusCodeLibNull
Building ... /Users/exzo/src/edk2/Clover/ShellPkg/Library/UefiShellDriver1CommandsLib/UefiShellDriver1CommandsLib.inf [X64]
Building ... /Users/exzo/src/edk2/Clover/ShellPkg/Library/UefiShellLevel3CommandsLib/UefiShellLevel3CommandsLib.inf [X64]
[CC] OpensslLibNull
Building ... /Users/exzo/src/edk2/Clover/ShellPkg/Library/UefiShellLevel1CommandsLib/UefiShellLevel1CommandsLib.inf [X64]
/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/libtool: file: /Users/exzo/src/edk2/Build/Clover/RELEASE_XCODE8/X64/Clover/Library/OpensslLib/OpensslLibNull/OUTPUT/OpensslLibNull.obj has no symbols
warning: /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/libtool: warning for library: /Users/exzo/src/edk2/Build/Clover/RELEASE_XCODE8/X64/Clover/Library/OpensslLib/OpensslLibNull/OUTPUT/OpensslLib.lib the table of contents is empty (no object file members in the library define global symbols)
[SLINK] OpensslLib
Building ... /Users/exzo/src/edk2/Clover/ShellPkg/Library/UefiShellLevel2CommandsLib/UefiShellLevel2CommandsLib.inf [X64]
Building ... /Users/exzo/src/edk2/MdeModulePkg/Library/DxeNetLib/DxeNetLib.inf [X64]
[CC] ScanMem64Wrapper
Building ... /Users/exzo/src/edk2/Clover/ShellPkg/Library/UefiShellBcfgCommandLib/UefiShellBcfgCommandLib.inf [X64]
[CC] UefiShellInstall1CommandsLib
Building ... /Users/exzo/src/edk2/Clover/ShellPkg/Library/UefiShellCommandLib/UefiShellCommandLib.inf [X64]
[SLINK] UefiShellInstall1CommandsLib
Building ... /Users/exzo/src/edk2/Clover/ShellPkg/Library/UefiHandleParsingLib/UefiHandleParsingLib.inf [X64]
Building ... /Users/exzo/src/edk2/MdeModulePkg/Library/UefiHiiServicesLib/UefiHiiServicesLib.inf [X64]
Building ... /Users/exzo/src/edk2/Clover/ShellPkg/Library/UefiShellNetwork2CommandsLib/UefiShellNetwork2CommandsLib.inf [X64]
[CC] SetSize
[CC] ScanMem32Wrapper
[CC] Type
[CC] UefiShellLevel1CommandsLib
[CC] Connect
[CC] UefiShellLevel2CommandsLib
[CC] SafeString
[CC] UefiHiiServicesLib
[CC] ScanMem16Wrapper
[SLINK] UefiHiiServicesLib
Building ... /Users/exzo/src/edk2/Clover/ShellPkg/Library/UefiShellNetwork1CommandsLib/UefiShellNetwork1CommandsLib.inf [X64]
[CC] UefiShellNetwork2CommandsLib
[CC] Exit
[CC] ScanMem8Wrapper
[CC] Touch
[CC] Devices
[CC] Comp
[CC] UefiShellNetwork1CommandsLib
[CC] Goto
[CC] ZeroMemWrapper
[CC] Ver
[CC] String
[CC] TimeDate
/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/libtool: warning same member name (LongJump.obj) in output file used for input files: /Users/exzo/src/edk2/Build/Clover/RELEASE_XCODE8/X64/MdePkg/Library/BaseLib/BaseLib/OUTPUT/X64/LongJump.obj and: /Users/exzo/src/edk2/Build/Clover/RELEASE_XCODE8/X64/MdePkg/Library/BaseLib/BaseLib/OUTPUT/LongJump.obj (due to use of basename, truncation, blank padding or duplicate input files)
/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/libtool: warning same member name (SetJump.obj) in output file used for input files: /Users/exzo/src/edk2/Build/Clover/RELEASE_XCODE8/X64/MdePkg/Library/BaseLib/BaseLib/OUTPUT/X64/SetJump.obj and: /Users/exzo/src/edk2/Build/Clover/RELEASE_XCODE8/X64/MdePkg/Library/BaseLib/BaseLib/OUTPUT/SetJump.obj (due to use of basename, truncation, blank padding or duplicate input files)
/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/libtool: warning same member name (SwitchStack.obj) in output file used for input files: /Users/exzo/src/edk2/Build/Clover/RELEASE_XCODE8/X64/MdePkg/Library/BaseLib/BaseLib/OUTPUT/SwitchStack.obj and: /Users/exzo/src/edk2/Build/Clover/RELEASE_XCODE8/X64/MdePkg/Library/BaseLib/BaseLib/OUTPUT/X64/SwitchStack.obj (due to use of basename, truncation, blank padding or duplicate input files)
[CC] CompareMemWrapper
[SLINK] BaseLib
Building ... /Users/exzo/src/edk2/Clover/ShellPkg/Library/UefiShellLib/UefiShellLib.inf [X64]
[CC] OpenInfo
[CC] Mode
[CC] UefiShellBcfgCommandLib
[CC] UefiShellCommandLib
[CC] Ping6
[CC] UefiShellLevel3CommandsLib
[CC] SetMem64Wrapper
[CC] Load
/Users/exzo/src/edk2/Clover/ShellPkg/Library/UefiShellLib/UefiShellLib.c:488:1: error: conflicting types for 'ShellOpenFileByDevicePath'
ShellOpenFileByDevicePath(
^
/Users/exzo/src/edk2/ShellPkg/Include/Library/ShellLib.h:115:1: note: previous declaration is here
ShellOpenFileByDevicePath(
^
[CC] AutoGen
/Users/exzo/src/edk2/Clover/ShellPkg/Library/UefiShellLib/UefiShellLib.c:774:39: error: too many arguments to function call, expected 4, have 5
                                      Attributes));
                                      ^~~~~~~~~~
/Users/exzo/src/edk2/ShellPkg/Include/Library/ShellLib.h:113:1: note: 'ShellOpenFileByDevicePath' declared here
EFI_STATUS
^
[CC] DxeNetLib
[SLINK] UefiShellBcfgCommandLib
Building ... /Users/exzo/src/edk2/MdePkg/Library/UefiApplicationEntryPoint/UefiApplicationEntryPoint.inf [X64]
2 errors generated.
make: *** [/Users/exzo/src/edk2/Build/Clover/RELEASE_XCODE8/X64/Clover/ShellPkg/Library/UefiShellLib/UefiShellLib/OUTPUT/UefiShellLib.obj] Error 1
[CC] Disconnect


build.py...
 : error 7000: Failed to execute command
	make tbuild [/Users/exzo/src/edk2/Build/Clover/RELEASE_XCODE8/X64/Clover/ShellPkg/Library/UefiShellLib/UefiShellLib]


build.py...
 : error F002: Failed to build module
	/Users/exzo/src/edk2/Clover/ShellPkg/Library/UefiShellLib/UefiShellLib.inf [X64, XCODE8, RELEASE]

- Failed -
Build end time: 16:01:48, Sep.28 2018
Build total time: 00:00:25


o_Ops, ./ebuild.sh exited with error(s), aborting..

can anybody help me?

bluemaP1E · September 28, 2018

30 minutes ago, stinga11 said:

with the lastest udpdates on clover I cant compile.


================================================================================
Building Clover
                             <--------------------------------------------------
================================================================================
boot6
                             <--------------------------------------------------
TOOLCHAIN_DIR: /Users/exzo/src/opt/local
MTOC_PREFIX: /Users/exzo/src/opt/local/bin/
NASM_PREFIX: /Users/exzo/src/opt/local/bin/
NASM_VER: 2.13.03
Building from: /Users/exzo/src/edk2

Running edk2 build for CloverX64 using the command:
build  -D NO_GRUB_DRIVERS_EMBEDDED --conf=/Users/exzo/src/edk2/Conf -D USE_LOW_EBDA -p Clover/Clover.dsc  -a X64 -b RELEASE -t XCODE8 -n 13 

Build environment: Darwin-18.0.0-x86_64-i386-64bit
Build start time: 16:01:23, Sep.28 2018

WORKSPACE        = /Users/exzo/src/edk2
ECP_SOURCE       = /Users/exzo/src/edk2/EdkCompatibilityPkg
EDK_SOURCE       = /Users/exzo/src/edk2/EdkCompatibilityPkg
EFI_SOURCE       = /Users/exzo/src/edk2/EdkCompatibilityPkg
EDK_TOOLS_PATH   = /Users/exzo/src/edk2/BaseTools
CONF_PATH        = /Users/exzo/src/edk2/Conf


Architecture(s)  = X64
Build target     = RELEASE
Toolchain        = XCODE8

Active Platform          = /Users/exzo/src/edk2/Clover/Clover.dsc
Flash Image Definition   = /Users/exzo/src/edk2/Clover/Clover.fdf

Processing meta-data ................ done!
Building ... /Users/exzo/src/edk2/MdePkg/Library/BaseIoLibIntrinsic/BaseIoLibIntrinsic.inf [X64]
Building ... /Users/exzo/src/edk2/MdePkg/Library/BaseReportStatusCodeLibNull/BaseReportStatusCodeLibNull.inf [X64]
make: Nothing to be done for `tbuild'.
Building ... /Users/exzo/src/edk2/MdePkg/Library/BasePrintLib/BasePrintLib.inf [X64]
Building ... /Users/exzo/src/edk2/MdePkg/Library/BaseLib/BaseLib.inf [X64]
make: Nothing to be done for `tbuild'.
Building ... /Users/exzo/src/edk2/MdePkg/Library/BaseMemoryLib/BaseMemoryLib.inf [X64]
Building ... /Users/exzo/src/edk2/MdePkg/Library/BaseDebugLibNull/BaseDebugLibNull.inf [X64]
make: Nothing to be done for `tbuild'.
Building ... /Users/exzo/src/edk2/MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf [X64]
make: Nothing to be done for `tbuild'.
make: Nothing to be done for `tbuild'.
Building ... /Users/exzo/src/edk2/MdePkg/Library/BaseCpuLib/BaseCpuLib.inf [X64]
make: Nothing to be done for `tbuild'.
Building ... /Users/exzo/src/edk2/Clover/Library/OpensslLib/OpensslLibNull.inf [X64]
Building ... /Users/exzo/src/edk2/MdePkg/Library/UefiMemoryLib/UefiMemoryLib.inf [X64]
Building ... /Users/exzo/src/edk2/Clover/ShellPkg/Library/UefiShellDebug1CommandsLib/UefiShellDebug1CommandsLib.inf [X64]
[CC] BaseReportStatusCodeLib
Building ... /Users/exzo/src/edk2/Clover/ShellPkg/Library/UefiShellInstall1CommandsLib/UefiShellInstall1CommandsLib.inf [X64]
[SLINK] BaseReportStatusCodeLibNull
Building ... /Users/exzo/src/edk2/Clover/ShellPkg/Library/UefiShellDriver1CommandsLib/UefiShellDriver1CommandsLib.inf [X64]
Building ... /Users/exzo/src/edk2/Clover/ShellPkg/Library/UefiShellLevel3CommandsLib/UefiShellLevel3CommandsLib.inf [X64]
[CC] OpensslLibNull
Building ... /Users/exzo/src/edk2/Clover/ShellPkg/Library/UefiShellLevel1CommandsLib/UefiShellLevel1CommandsLib.inf [X64]
/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/libtool: file: /Users/exzo/src/edk2/Build/Clover/RELEASE_XCODE8/X64/Clover/Library/OpensslLib/OpensslLibNull/OUTPUT/OpensslLibNull.obj has no symbols
warning: /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/libtool: warning for library: /Users/exzo/src/edk2/Build/Clover/RELEASE_XCODE8/X64/Clover/Library/OpensslLib/OpensslLibNull/OUTPUT/OpensslLib.lib the table of contents is empty (no object file members in the library define global symbols)
[SLINK] OpensslLib
Building ... /Users/exzo/src/edk2/Clover/ShellPkg/Library/UefiShellLevel2CommandsLib/UefiShellLevel2CommandsLib.inf [X64]
Building ... /Users/exzo/src/edk2/MdeModulePkg/Library/DxeNetLib/DxeNetLib.inf [X64]
[CC] ScanMem64Wrapper
Building ... /Users/exzo/src/edk2/Clover/ShellPkg/Library/UefiShellBcfgCommandLib/UefiShellBcfgCommandLib.inf [X64]
[CC] UefiShellInstall1CommandsLib
Building ... /Users/exzo/src/edk2/Clover/ShellPkg/Library/UefiShellCommandLib/UefiShellCommandLib.inf [X64]
[SLINK] UefiShellInstall1CommandsLib
Building ... /Users/exzo/src/edk2/Clover/ShellPkg/Library/UefiHandleParsingLib/UefiHandleParsingLib.inf [X64]
Building ... /Users/exzo/src/edk2/MdeModulePkg/Library/UefiHiiServicesLib/UefiHiiServicesLib.inf [X64]
Building ... /Users/exzo/src/edk2/Clover/ShellPkg/Library/UefiShellNetwork2CommandsLib/UefiShellNetwork2CommandsLib.inf [X64]
[CC] SetSize
[CC] ScanMem32Wrapper
[CC] Type
[CC] UefiShellLevel1CommandsLib
[CC] Connect
[CC] UefiShellLevel2CommandsLib
[CC] SafeString
[CC] UefiHiiServicesLib
[CC] ScanMem16Wrapper
[SLINK] UefiHiiServicesLib
Building ... /Users/exzo/src/edk2/Clover/ShellPkg/Library/UefiShellNetwork1CommandsLib/UefiShellNetwork1CommandsLib.inf [X64]
[CC] UefiShellNetwork2CommandsLib
[CC] Exit
[CC] ScanMem8Wrapper
[CC] Touch
[CC] Devices
[CC] Comp
[CC] UefiShellNetwork1CommandsLib
[CC] Goto
[CC] ZeroMemWrapper
[CC] Ver
[CC] String
[CC] TimeDate
/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/libtool: warning same member name (LongJump.obj) in output file used for input files: /Users/exzo/src/edk2/Build/Clover/RELEASE_XCODE8/X64/MdePkg/Library/BaseLib/BaseLib/OUTPUT/X64/LongJump.obj and: /Users/exzo/src/edk2/Build/Clover/RELEASE_XCODE8/X64/MdePkg/Library/BaseLib/BaseLib/OUTPUT/LongJump.obj (due to use of basename, truncation, blank padding or duplicate input files)
/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/libtool: warning same member name (SetJump.obj) in output file used for input files: /Users/exzo/src/edk2/Build/Clover/RELEASE_XCODE8/X64/MdePkg/Library/BaseLib/BaseLib/OUTPUT/X64/SetJump.obj and: /Users/exzo/src/edk2/Build/Clover/RELEASE_XCODE8/X64/MdePkg/Library/BaseLib/BaseLib/OUTPUT/SetJump.obj (due to use of basename, truncation, blank padding or duplicate input files)
/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/libtool: warning same member name (SwitchStack.obj) in output file used for input files: /Users/exzo/src/edk2/Build/Clover/RELEASE_XCODE8/X64/MdePkg/Library/BaseLib/BaseLib/OUTPUT/SwitchStack.obj and: /Users/exzo/src/edk2/Build/Clover/RELEASE_XCODE8/X64/MdePkg/Library/BaseLib/BaseLib/OUTPUT/X64/SwitchStack.obj (due to use of basename, truncation, blank padding or duplicate input files)
[CC] CompareMemWrapper
[SLINK] BaseLib
Building ... /Users/exzo/src/edk2/Clover/ShellPkg/Library/UefiShellLib/UefiShellLib.inf [X64]
[CC] OpenInfo
[CC] Mode
[CC] UefiShellBcfgCommandLib
[CC] UefiShellCommandLib
[CC] Ping6
[CC] UefiShellLevel3CommandsLib
[CC] SetMem64Wrapper
[CC] Load
/Users/exzo/src/edk2/Clover/ShellPkg/Library/UefiShellLib/UefiShellLib.c:488:1: error: conflicting types for 'ShellOpenFileByDevicePath'
ShellOpenFileByDevicePath(
^
/Users/exzo/src/edk2/ShellPkg/Include/Library/ShellLib.h:115:1: note: previous declaration is here
ShellOpenFileByDevicePath(
^
[CC] AutoGen
/Users/exzo/src/edk2/Clover/ShellPkg/Library/UefiShellLib/UefiShellLib.c:774:39: error: too many arguments to function call, expected 4, have 5
                                      Attributes));
                                      ^~~~~~~~~~
/Users/exzo/src/edk2/ShellPkg/Include/Library/ShellLib.h:113:1: note: 'ShellOpenFileByDevicePath' declared here
EFI_STATUS
^
[CC] DxeNetLib
[SLINK] UefiShellBcfgCommandLib
Building ... /Users/exzo/src/edk2/MdePkg/Library/UefiApplicationEntryPoint/UefiApplicationEntryPoint.inf [X64]
2 errors generated.
make: *** [/Users/exzo/src/edk2/Build/Clover/RELEASE_XCODE8/X64/Clover/ShellPkg/Library/UefiShellLib/UefiShellLib/OUTPUT/UefiShellLib.obj] Error 1
[CC] Disconnect


build.py...
 : error 7000: Failed to execute command
	make tbuild [/Users/exzo/src/edk2/Build/Clover/RELEASE_XCODE8/X64/Clover/ShellPkg/Library/UefiShellLib/UefiShellLib]


build.py...
 : error F002: Failed to build module
	/Users/exzo/src/edk2/Clover/ShellPkg/Library/UefiShellLib/UefiShellLib.inf [X64, XCODE8, RELEASE]

- Failed -
Build end time: 16:01:48, Sep.28 2018
Build total time: 00:00:25


o_Ops, ./ebuild.sh exited with error(s), aborting..

can anybody help me?

same issue, latest 4.9.2 + clover 4679 +edk2 27956 + Xcode 10

camillionario · September 28, 2018

42 minutes ago, stinga11 said:
con las últimas udpdates en trébol que no puedo compilar.
¿Alguien puede ayudarme?

Follow this

stinga11 · September 29, 2018

6 hours ago, camillionario said:

Follow this

Greetings, I downloaded the latest version of "https://github.com/acidanthera/EfiPkg" as the clover does not compile.

Matgen84 · September 29, 2018

2 hours ago, stinga11 said:

Greetings, I downloaded the latest version of "https://github.com/acidanthera/EfiPkg" as the clover does not compile.

@savvas has update (merge) AptioFixPkg, also download latest version of "https://github.com/acidanthera/EfiPkg" isn't necessary, anymore.

Same error here with EDK2 Clover files

[CC] Load
/Users/exzo/src/edk2/Clover/ShellPkg/Library/UefiShellLib/UefiShellLib.c:488:1: error: conflicting types for 'ShellOpenFileByDevicePath'
ShellOpenFileByDevicePath(
^
/Users/exzo/src/edk2/ShellPkg/Include/Library/ShellLib.h:115:1: note: previous declaration is here
ShellOpenFileByDevicePath(
^
[CC] AutoGen
/Users/exzo/src/edk2/Clover/ShellPkg/Library/UefiShellLib/UefiShellLib.c:774:39: error: too many arguments to function call, expected 4, have 5
                                      Attributes));
                                      ^~~~~~~~~~
/Users/exzo/src/edk2/ShellPkg/Include/Library/ShellLib.h:113:1: note: 'ShellOpenFileByDevicePath' declared here
EFI_STATUS
^
[CC] DxeNetLib
[SLINK] UefiShellBcfgCommandLib
Building ... /Users/exzo/src/edk2/MdePkg/Library/UefiApplicationEntryPoint/UefiApplicationEntryPoint.inf [X64]
2 errors generated.
make: *** [/Users/exzo/src/edk2/Build/Clover/RELEASE_XCODE8/X64/Clover/ShellPkg/Library/UefiShellLib/UefiShellLib/OUTPUT/UefiShellLib.obj] Error 1
[CC] Disconnect


build.py...
 : error 7000: Failed to execute command
	make tbuild [/Users/exzo/src/edk2/Build/Clover/RELEASE_XCODE8/X64/Clover/ShellPkg/Library/UefiShellLib/UefiShellLib]


build.py...
 : error F002: Failed to build module
	/Users/exzo/src/edk2/Clover/ShellPkg/Library/UefiShellLib/UefiShellLib.inf [X64, XCODE8, RELEASE]

- Failed -
Build end time: 16:01:48, Sep.28 2018
Build total time: 00:00:25


o_Ops, ./ebuild.sh exited with error(s), aborting..

Edited September 29, 2018 by Matgen84

D-an-W · September 29, 2018

I think my error is the same after updating the Script and EDK2 revision:

================================================================================
Build_Clover script v4.9.1                             Update available (v4.9.2)
                             <--------------------------------------------------
================================================================================
                        What's New in Version 4.9.2?

Sync with EDK2 r27956
================================================================================

================================================================================
Build_Clover script v4.9.2                                  No update available.
                             <--------------------------------------------------
================================================================================
By Micky1979 based on Slice, apianti, vit9696, Download Fritz, Zenith432,
STLVNUB, JrCs,cecekpawon, Needy, cvad, Rehabman, philip_petev, ErmaC

Supported OSes: macOS X, Ubuntu (16.04/16.10), Debian Jessie and Stretch
                             <--------------------------------------------------
CLOVER	Remote revision: 4679	Local revision: 4674
EDK2	Remote revision: 28026	Local revision: 27429

The current local EDK2 revision is not the suggested one (27956)!
It's recommended to change it to the suggested one,
using the update Clover + force edk2 update option!
Used settings: /Users/dan/BuildCloverConfig.txt

[CC] Dmem
/Users/dan/src/edk2/Clover/ShellPkg/Library/UefiShellLib/UefiShellLib.c:488:1: error: conflicting types for 'ShellOpenFileByDevicePath'
ShellOpenFileByDevicePath(
^
/Users/dan/src/edk2/ShellPkg/Include/Library/ShellLib.h:115:1: note: previous declaration is here
ShellOpenFileByDevicePath(
^
/Users/dan/src/edk2/Clover/ShellPkg/Library/UefiShellLib/UefiShellLib.c:774:39: error: too many arguments to function call, expected 4, have 5
                                      Attributes));
                                      ^~~~~~~~~~
/Users/dan/src/edk2/ShellPkg/Include/Library/ShellLib.h:113:1: note: 'ShellOpenFileByDevicePath' declared here
EFI_STATUS
^
[CC] UefiShellCommandLib
2 errors generated.
make: *** [/Users/dan/src/edk2/Build/Clover/RELEASE_XCODE8/X64/Clover/ShellPkg/Library/UefiShellLib/UefiShellLib/OUTPUT/UefiShellLib.obj] Error 1


build.py...
 : error 7000: Failed to execute command
	make tbuild [/Users/dan/src/edk2/Build/Clover/RELEASE_XCODE8/X64/Clover/ShellPkg/Library/UefiShellLib/UefiShellLib]


build.py...
 : error F002: Failed to build module
	/Users/dan/src/edk2/Clover/ShellPkg/Library/UefiShellLib/UefiShellLib.inf [X64, XCODE8, RELEASE]

- Failed -
Build end time: 07:34:13, Sep.29 2018
Build total time: 00:00:18


o_Ops, ./ebuild.sh exited with error(s), aborting..

STLVNUB · September 29, 2018

I think you find it edk2 problem

Wait for them to fix.

Slice · September 29, 2018

edk2/ShellPkg/Include/Library/ShellLib.h

should be edited in Patches_for_EDK2

Zenith432 · September 29, 2018

Sorry about that. I don't build the shell so it slipped by. There's a divergence in prototype of ShellOpenFileByDevicePath between UDK2018 and EDK2. Update to Clover r4680 and reapply Patches_For_EDK2.

Cyberdevs · September 29, 2018

6 minutes ago, Zenith432 said:

Sorry about that. I don't build the shell so it slipped by. There's a divergence in prototype of ShellOpenFileByDevicePath between UDK2018 and EDK2. Update to Clover r4680 and reapply Patches_For_EDK2.

r4680 built was successful using v4.9.2 Thanks.

Spoiler

Build info.
===========
Package name: Clover_v2.4k_r4680.pkg
MD5: e0aaaf5af98a4940d427bd2c13f9107d
Version: v2.4k
Stage: v2.4k
Date/Time: 2018-09-29 14:01:58
Built by: cyberdevs
Copyright 2012-2018

adding: Clover_v2.4k_r4680.pkg (deflated 0%)
adding: Clover_v2.4k_r4680.pkg.md5 (stored 0%)
total 47688
drwxr-xr-x 9 cyberdevs staff 288 Sep 29 14:03 .
drwxr-xr-x 15 cyberdevs staff 480 Sep 29 14:03 ..
-rw-r--r--@ 1 cyberdevs staff 12002349 Sep 29 14:03 Clover_v2.4k_r4680.pkg
-rw-r--r-- 1 cyberdevs staff 68 Sep 29 14:03 Clover_v2.4k_r4680.pkg.md5
-rw-r--r-- 1 cyberdevs staff 11951751 Sep 29 14:03 Clover_v2.4k_r4680.zip
drwxr-xr-x 3 cyberdevs staff 96 Sep 29 14:02 Resources
drwxr-xr-x 6 cyberdevs staff 192 Sep 29 14:02 build
drwxr-xr-x 3 cyberdevs staff 96 Sep 29 14:03 package
drwxr-xr-x 6 cyberdevs staff 192 Sep 29 14:02 utils
================================================================================

Clover was built successfully!
Press any key to continue...

Matgen84 · September 29, 2018

3 hours ago, Zenith432 said:

Sorry about that. I don't build the shell so it slipped by. There's a divergence in prototype of ShellOpenFileByDevicePath between UDK2018 and EDK2. Update to Clover r4680 and reapply Patches_For_EDK2.

As @Cyberdevs commit r4680 is successfully build with 4.9.2 script. Thanks a lot.

stinga11 · September 29, 2018

r4680 is successfully build with 4.9.2 script. Thanks Guys!!!! :thumbsup_anim:

Kanchi · September 29, 2018

r4682 is successfully build with 4.9.2 script. Thanks.

SavageAUS · October 1, 2018

Anyway Virtualsmc.efi can be added to script? I know it requires a kext as well but can that be added as well?
I’m using v1.0.0 of virtualsmc kext + efi without issues. No need FakeSMC anymore.

Sent from my iPhone using Tapatalk

Matgen84 · October 1, 2018

4 hours ago, SavageAUS said:

Anyway Virtualsmc.efi can be added to script? I know it requires a kext as well but can that be added as well?
I’m using v1.0.0 of virtualsmc kext + efi without issues. No need FakeSMC anymore.

Sent from my iPhone using Tapatalk

Good Idea VirtualSMC.efi is just for FileVault 2 users. Only VirtualSMC.kext is enough if you want just replace FakeSMC.

Philip Petev · October 3, 2018

The Error 65 is back

Spoiler

================================================================================
MAKE PKG
<--------------------------------------------------

========= Translating Resources ========
/Users/philip/src/edk2/Clover/CloverPackage/package/../../../../opt/local
Updating 'en' strings file for CloverUpdater... done
Updating 'en' strings file for Clover Preference Panel... done
Updating strings file for Clover Preference Panel... done

Updating 'en' strings file for CloverUpdater... done
Generating de interface... done
Generating es interface... done
Generating fr interface... done
Generating hr interface... done
Generating id interface... done
Generating it interface... done
Generating ja interface... done
Generating ko interface... done
Generating lv interface... done
Generating nl interface... done
Generating pl interface... done
Generating pt-BR interface... done
Generating pt interface... done
Generating ro interface... done
Generating ru interface... done
Generating tr interface... done
Generating uk interface... done
Generating vi interface... done
Generating zh_CN interface... done
Generating zh_TW interface... done
Building CloverUpdater application...
** BUILD FAILED **

The following build commands failed:
Ld /Users/philip/src/edk2/Clover/CloverPackage/CloverUpdater/build/CloverUpdater.app/Contents/MacOS/CloverUpdater normal x86_64
(1 failure)
make[1]: *** [CloverUpdater] Error 65
make: *** [pkg] Error 2

o_Ops, MAKE PKG exited with error(s), aborting..

Happens to me since I updated Xcode to v.10. This is on High Sierra.

Cyberdevs · October 3, 2018

2 hours ago, Philip Petev said:

The Error 65 is back

Reveal hidden contents

================================================================================
MAKE PKG
<--------------------------------------------------

========= Translating Resources ========
/Users/philip/src/edk2/Clover/CloverPackage/package/../../../../opt/local
Updating 'en' strings file for CloverUpdater... done
Updating 'en' strings file for Clover Preference Panel... done
Updating strings file for Clover Preference Panel... done

Updating 'en' strings file for CloverUpdater... done
Generating de interface... done
Generating es interface... done
Generating fr interface... done
Generating hr interface... done
Generating id interface... done
Generating it interface... done
Generating ja interface... done
Generating ko interface... done
Generating lv interface... done
Generating nl interface... done
Generating pl interface... done
Generating pt-BR interface... done
Generating pt interface... done
Generating ro interface... done
Generating ru interface... done
Generating tr interface... done
Generating uk interface... done
Generating vi interface... done
Generating zh_CN interface... done
Generating zh_TW interface... done
Building CloverUpdater application...
** BUILD FAILED **

The following build commands failed:
Ld /Users/philip/src/edk2/Clover/CloverPackage/CloverUpdater/build/CloverUpdater.app/Contents/MacOS/CloverUpdater normal x86_64
(1 failure)
make[1]: *** [CloverUpdater] Error 65
make: *** [pkg] Error 2

o_Ops, MAKE PKG exited with error(s), aborting..

Happens to me since I updated Xcode to v.10. This is on High Sierra.

On Mojave and Xcode 10 I have no issue, maybe this is related to High Sierra and Xcode 10?

Matgen84 · October 4, 2018

8 hours ago, Philip Petev said:

The Error 65 is back

Reveal hidden contents

================================================================================
MAKE PKG
<--------------------------------------------------

========= Translating Resources ========
/Users/philip/src/edk2/Clover/CloverPackage/package/../../../../opt/local
Updating 'en' strings file for CloverUpdater... done
Updating 'en' strings file for Clover Preference Panel... done
Updating strings file for Clover Preference Panel... done

Updating 'en' strings file for CloverUpdater... done
Generating de interface... done
Generating es interface... done
Generating fr interface... done
Generating hr interface... done
Generating id interface... done
Generating it interface... done
Generating ja interface... done
Generating ko interface... done
Generating lv interface... done
Generating nl interface... done
Generating pl interface... done
Generating pt-BR interface... done
Generating pt interface... done
Generating ro interface... done
Generating ru interface... done
Generating tr interface... done
Generating uk interface... done
Generating vi interface... done
Generating zh_CN interface... done
Generating zh_TW interface... done
Building CloverUpdater application...
** BUILD FAILED **

The following build commands failed:
Ld /Users/philip/src/edk2/Clover/CloverPackage/CloverUpdater/build/CloverUpdater.app/Contents/MacOS/CloverUpdater normal x86_64
(1 failure)
make[1]: *** [CloverUpdater] Error 65
make: *** [pkg] Error 2

o_Ops, MAKE PKG exited with error(s), aborting..

Happens to me since I updated Xcode to v.10. This is on High Sierra.

No issues here with Xcode 10 on High Sierra. I had to do a clean "src" installation to go from EDK2 revision 27429 to r27956.

The script merge and resolve conflicts for some .po files. Result Output attached.

Résultat de Terminal.zip

Bootloader Build_Clover.command, another Script to build standard Clover (or customized)

Recommended Posts

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites