Fljagd Posted October 27, 2016 Share Posted October 27, 2016 Yes. Thank a lot Link to comment Share on other sites More sharing options...
RoyalKingMomo Posted October 28, 2016 Share Posted October 28, 2016 Has anyone been able to test the PM951 (not SM) from Samsung? It's been KP'ing every time I've used a patched NVMe kext such as the one in this post... I am also not all that good at this entire mackintosh thing but I think I'm doing this correctly. Link to comment Share on other sites More sharing options...
SammlerG Posted October 28, 2016 Share Posted October 28, 2016 this version worked for me with Samsung 950pro using -a option NVMeP_2.4_beta2.zip NVMeP -a worked! NVMeP don´t work for me. Link to comment Share on other sites More sharing options...
Micky1979 Posted October 28, 2016 Share Posted October 28, 2016 this version worked for me with Samsung 950pro using -a option NVMeP_2.4_beta2.zip NVMeP -a worked! NVMeP don´t work for me. Ok thanks, later will update my repo with this new tiny patch for Sierra 10.12.1 + aah! -a options leave the class code as is, i.e Apple way... not PC way Link to comment Share on other sites More sharing options...
TrevJonez2 Posted October 28, 2016 Share Posted October 28, 2016 Just used the NVMeP_2.4_beta2.zip on my 950 pro with the -a option. It is working but want to check if the method I used to install was correct. I added all the patches to my clover config and dropped the kext in my clover/kext/other. Everything booted fine I just wanted to verify that both were necessary? Link to comment Share on other sites More sharing options...
magnifico Posted October 29, 2016 Share Posted October 29, 2016 Just used the NVMeP_2.4_beta2.zip on my 950 pro with the -a option. It is working but want to check if the method I used to install was correct. I added all the patches to my clover config and dropped the kext in my clover/kext/other. Everything booted fine I just wanted to verify that both were necessary? No ...or patch to kext or kext ( SLE) Link to comment Share on other sites More sharing options...
ibuick Posted October 29, 2016 Share Posted October 29, 2016 Ok thanks, later will update my repo with this new tiny patch for Sierra 10.12.1 + aah! -a options leave the class code as is, i.e Apple way... not PC way Intel DC P3700 in a Thunderbolt 2 Box cannot work properly on 12.1. When 10.12.0, I use the hackr kext and it working perfect. 10.12.1 it doesn't work anymore. So, I using this patch. No matter I use NVMeP -a or not, the generated kext crash on boot every time. Any suggestions? Thanks Link to comment Share on other sites More sharing options...
Micky1979 Posted October 29, 2016 Share Posted October 29, 2016 Intel DC P3700 in a Thunderbolt 2 Box cannot work properly on 12.1. When 10.12.0, I use the hackr kext and it working perfect. 10.12.1 it doesn't work anymore. So, I using this patch. No matter I use NVMeP -a or not, the generated kext crash on boot every time. Any suggestions? Thanks Is in /S/L/E, hackr kext deleted, and the cache is rebuilted correctly? Link to comment Share on other sites More sharing options...
magnifico Posted October 29, 2016 Share Posted October 29, 2016 Is in /S/L/E, hackr kext deleted, and the cache is rebuilted correctly? i not see in your repo 2.4 beta Link to comment Share on other sites More sharing options...
ibuick Posted October 29, 2016 Share Posted October 29, 2016 Is in /S/L/E, hackr kext deleted, and the cache is rebuilted correctly? Yep, I first remove the old hackr kext. Install the new kext. rebuild the cache with kextcache -invalidate / and then reboot Link to comment Share on other sites More sharing options...
Micky1979 Posted October 29, 2016 Share Posted October 29, 2016 i not see in your repo 2.4 beta Updated Yep, I first remove the old hackr kext. Install the new kext. rebuild the cache with kextcache -invalidate / and then reboot What to say, here works and I'm not alone..... but without any information about your kp I can't tell so mutch.... I'm not a magician (a picture should be enough). Link to comment Share on other sites More sharing options...
davidm71 Posted October 30, 2016 Share Posted October 30, 2016 Hi, Trying to get my USB installer to recognize my Intel 750 but the clover config.plist patch data locks up the USB installer boot process. I already have a successful hackr nvme kext on 12.0 and 12.1 working with out issue on the main installation but if i copy that to the USB EFI Clover kext folder and delete Ionvmefamily from the usb key and rebuild its caches with kext wizard (maybe i shouldnt do it that way ?) it KPs when i try to boot the USB key. Otherwise I can boot the usb key just fine with out it. Maybe I should try to run the patch script within a terminal window from inside the USB Sierra installer? Thanks Link to comment Share on other sites More sharing options...
magnifico Posted October 30, 2016 Share Posted October 30, 2016 Updated Miscel , kext Borg inside SLE of pen drive ? Link to comment Share on other sites More sharing options...
davidm71 Posted October 30, 2016 Share Posted October 30, 2016 Think it would be a good idea if the first post details the proper way to include the patched data into the config.plst file. Took me like eight hours to figure it out in that you need to add a 'KextsToPatch' key and wrap all of Pike's patch data in an 'array' key. Good thing the beta produces a config sample plist as before that was out for reference as it was confusing before that came out. Also how to convert the hex data device matching info from hex to text and back and forth using xcode or else your drive not be recognized. Spare the next guy a few hours.. Link to comment Share on other sites More sharing options...
UNOE Posted October 31, 2016 Share Posted October 31, 2016 Beta2, forgot to add the "16B2555" build string to the MatchBuild key for Clover NVMeP_2.4_beta2.zip I need to know if work also for you. But be aware that can break your filesystem (of the nvme disk) if something goes wrong. so do that only if you have a backup. If is a "secondary disk" and is empty go ahead, it's safe. There is a new build version of 16B2657. Will Beta 2 version work for this build? Link to comment Share on other sites More sharing options...
Micky1979 Posted October 31, 2016 Share Posted October 31, 2016 No idea. But run NVMeP cost nothing and in truth I cannot understand why you want an extreme hack on a beta build that could change soon. No one will try for you, me not for sure . Link to comment Share on other sites More sharing options...
magnifico Posted October 31, 2016 Share Posted October 31, 2016 No idea. But run NVMeP cost nothing and in truth I cannot understand why you want an extreme hack on a beta build that could change soon. No one will try for you, me not for sure . +1 1 Link to comment Share on other sites More sharing options...
sasta Posted October 31, 2016 Share Posted October 31, 2016 I am trying to use Plextor m8pe but without success. I tried changing pci vendor ids with rehabman's hackr kext with no luck. Tried also NVMeP both in 10.12.0 and 10.12.1 again nothing. Will try with -a but I don't think it will work. Any ideas. Can someone help? Thanks Link to comment Share on other sites More sharing options...
Micky1979 Posted October 31, 2016 Share Posted October 31, 2016 I am trying to use Plextor m8pe but without success. I tried changing pci vendor ids with rehabman's hackr kext with no luck. Tried also NVMeP both in 10.12.0 and 10.12.1 again nothing. Will try with -a but I don't think it will work. Any ideas. Can someone help? Thanks One, try also -a Link to comment Share on other sites More sharing options...
sasta Posted October 31, 2016 Share Posted October 31, 2016 Tried tha One, try also -aTried that. No luck. At bootlog I can see the nvme associated with class 0108200 but in system profile there is nothing.Can I send you any file that would help? Link to comment Share on other sites More sharing options...
Micky1979 Posted October 31, 2016 Share Posted October 31, 2016 The bootlog should be intresting. But, I don't know if you use an adapter or is reported as working... also I don't know where you had put this patched kext.. ... Anyway, KextsToPatch should work (configSample.plist) ... and I'm curious to know if this way work. Link to comment Share on other sites More sharing options...
sasta Posted October 31, 2016 Share Posted October 31, 2016 The bootlog should be intresting. But, I don't know if you use an adapter or is reported as working... also I don't know where you had put this patched kext.. ... Anyway, KextsToPatch should work (configSample.plist) ... and I'm curious to know if this way work. It is installed in m.2, no adapter. Asus Z170M-PLUS.Tried kextstopatch, again no luck. I also put devid 14A4 22F1 in kexts to patch, as from Rehabman's patches. I attached bootleg and config.list. Thank you in advance for looking into them. bootlog.rtf config.plist.zip Link to comment Share on other sites More sharing options...
ihfr Posted November 1, 2016 Share Posted November 1, 2016 Hi, I'm trying to install OS X Sierra on existing hardware, save for a new M.2 drive. I followed post #8 and managed to detect and install Sierra onto the nvme drive. However I am not able to boot into the newly installed Sierra. When I boot into the USB and reach the Clover bootloader, I only have the option to boot Mac OSX from USB. Motherboard: Intel DZ87KLT-75k CPU: i7-4770k Expansion Card: Asus Hyper M.2 x4 Mini (the motherboard does not have onboard m.2 slot)Drive: Intel 600p 256GB So far I have booted from USB and used the terminal to mount both EFI partition from USB and Sierra and copy the files from the USB to Sierra EFI partition. Still no luck. Link to comment Share on other sites More sharing options...
sasta Posted November 1, 2016 Share Posted November 1, 2016 Hi, I'm trying to install OS X Sierra on existing hardware, save for a new M.2 drive. I followed post #8 and managed to detect and install Sierra onto the nvme drive. However I am not able to boot into the newly installed Sierra. When I boot into the USB and reach the Clover bootloader, I only have the option to boot Mac OSX from USB. Motherboard: Intel DZ87KLT-75k CPU: i7-4770k Expansion Card: Asus Hyper M.2 x4 Mini (the motherboard does not have onboard m.2 slot)Drive: Intel 600p 256GB So far I have booted from USB and used the terminal to mount both EFI partition from USB and Sierra and copy the files from the USB to Sierra EFI partition. Still no luck. I guess your bios cannot boot from nvme. Check if there is an update enabling nvme (pci express) boot. Link to comment Share on other sites More sharing options...
Micky1979 Posted November 1, 2016 Share Posted November 1, 2016 @sasta try with that. config.plist.zip Link to comment Share on other sites More sharing options...
Recommended Posts