Jump to content

[AMD] macOS 10.12.x (Sierra) Kernel Testing & Release (for help use the Help Topic)


Mr. Xtreme
 Share

788 posts in this topic

Recommended Posts

I'll try both when I get home. So far I'm using slices. Works normal in S/L/E with 10.12.4 kernel.

 

Sent from my Pixel XL using Tapatalk

Looks like we need a new kernels for test.

BTW, on my intel hackbook 10.12.6 worked not good after update from 10.12.4 and 10.12.5 (clean 10.12.6 install from recovery works better, but not fine), and I'm not sure that latest vanilla kernel and it's sources is good enough.

Comparing programs stability in 10.12.3 with 10.12.3 kernel from Shaneee and in 10.12.6 with 10.12.4&10.12.6 kernels from Shaneee I can see more crashes in 10.12.4 and 10.12.6 (and on intel notebook too).

Link to comment
Share on other sites

For those with issues on previous kernel try this. Still the 10.12.6 sources.

Thanks for this new kernel which works at 10.12.6 in FX-6300 hackintosh.

[Edit]

This new kernel can wake-up normally from S3 sleep without blank screen or reboot issue.

Previous kernel dated on Sept 7 will reboot instantly when I try to wake-up from S3 sleep in FX-6300 hackintosh.

However its performance scores by Cinebench R15 were significantly lower than Bronya's kernel dated on Aug 25, 2017.

Shan_10126-FX-6300.txt

post-70188-0-64688300-1505533362_thumb.png

post-70188-0-35918700-1505533372_thumb.png

Edited by jsl
  • Like 1
Link to comment
Share on other sites

Hello...

Can you send me this original kext for 10.12.6 for replace an old usbfix with original?

(I've modified or added this kext)

 

 

AHCIPortInjector.kext
AppleBluetoothMultitouch.kext
AppleHIDMouse.kext
AppleHSSPIHIDDriver.kext
AppleIRController.kext
AppleRTC.kext
AppleStorageDrivers.kext
AppleTopCase.kext
AppleUSBEthernetHost.kext
AppleUSBMultitouch.kext
AppleUSBTopCase.kext
DummyUSBEHCIPCI.kext
DummyUSBXHCIPCI.kext
FakeSMC.kext
GenericUSBXHCI.kext
IOBDStorageFamily.kext
IOBluetoothFamily.kext
IOBluetoothHIDDriver.kext
IOHIDFamily.kext
IONetworkingFamily.kext
IOSerialFamily.kext
IOUSBFamily.kext
IOUSBHostFamily.kext
IOUSBMassStorageClass.kext
IOUSBMassStorageDriver.kext
NullCPUPowerManagement.kext
RealtekRTL8111.kext
System.kext
USBInjectAll.kext
VoodooHDA.kext
Link to comment
Share on other sites

Hello...

Can you send me this original kext for 10.12.6 for replace an old usbfix with original?

(I've modified or added this kext)

 

 

AHCIPortInjector.kext
AppleBluetoothMultitouch.kext
AppleHIDMouse.kext
AppleHSSPIHIDDriver.kext
AppleIRController.kext
AppleRTC.kext
AppleStorageDrivers.kext
AppleTopCase.kext
AppleUSBEthernetHost.kext
AppleUSBMultitouch.kext
AppleUSBTopCase.kext
DummyUSBEHCIPCI.kext
DummyUSBXHCIPCI.kext
FakeSMC.kext
GenericUSBXHCI.kext
IOBDStorageFamily.kext
IOBluetoothFamily.kext
IOBluetoothHIDDriver.kext
IOHIDFamily.kext
IONetworkingFamily.kext
IOSerialFamily.kext
IOUSBFamily.kext
IOUSBHostFamily.kext
IOUSBMassStorageClass.kext
IOUSBMassStorageDriver.kext
NullCPUPowerManagement.kext
RealtekRTL8111.kext
System.kext
USBInjectAll.kext
VoodooHDA.kext

 

Just remove USBInjectAll.kext Here are the original Apple Kexts you've mentioned. I've not included the non Apple kexts as you've most likely got them.

 

 

Original Kexts LordSith82.zip

  • Like 2
Link to comment
Share on other sites

 

Just remove USBInjectAll.kext Here are the original Apple Kexts you've mentioned. I've not included the non Apple kexts as you've most likely got them.

 

 

Shaneee, can you send me this original? IOHIDFamily.kext

Link to comment
Share on other sites

Here you go, 

 

attachicon.gifIOHIDFamily.kext.zip

 

 

Also here's a Final 10.12.6 for FX/APU/Athlon etc with SSE4.1 with the System kext if needed, http://www.insanelymac.com/forum/files/file/817-sierra-10126-amd-kernel/

Final kernel 10.12.6 and System.kext works well with both Clover 4200 and Enoch 2900

uname -a
Darwin Valentins-Mac-Pro.local 16.7.0 Darwin Kernel Version 16.7.0: Sun 17 Sep 2017 15:51:37 BST; root:xnu-3789.70.16/BUILD/obj/RELEASE_X86_64 x86_64

Thanks a lot for your work!

  • Like 1
Link to comment
Share on other sites

Here you go, 

 

attachicon.gifIOHIDFamily.kext.zip

 

 

Also here's a Final 10.12.6 for FX/APU/Athlon etc with SSE4.1 with the System kext if needed, http://www.insanelymac.com/forum/files/file/817-sierra-10126-amd-kernel/

Thanks for this new AMD kernel which worked perfectly in FX-6300 hackintosh at 10.12.6.

Performance is very well, stably, normal wake-up from sleep too !

Link to comment
Share on other sites

  • 2 weeks later...

Good afternoon,

I managed to install macOS Sierra on my PC with Clover Legacy Method

Kernel -> Shanee Vrs 10.12.6


My specifications

M.O.B.O -> Gigabyte 78LMT-USB3
Processor -> AMD FX 8320E
GPU -> Sapphire Radeon R7 240 -> HD 7770 with FAKEID Method
Sound -> Sound Blaster Audigy 2 ZS -> KxAudioDriver.ket / Board Sound not tested
USB -> Recognizes USB 3.0 devices on any port, USB 2.0 devices are only recognized on USB 3.0 ports.

As you can see, I have problems with the USB ports because I can not use USB 2.0 ports with other peripherals (Web Camera, Wireless Keyboard, Wireless Mouse, and others) because it does not recognize them, just recognize USB 3.0 devices. I installed the Calo Fix, Shanee but I still have the same problem.

Any suggestions to correct this problem

Thank you.

Link to comment
Share on other sites

Good afternoon,

 

I managed to install macOS Sierra on my PC with Clover Legacy Method

 

Kernel -> Shanee Vrs 10.12.6

 

 

My specifications

 

M.O.B.O -> Gigabyte 78LMT-USB3

Processor -> AMD FX 8320E

GPU -> Sapphire Radeon R7 240 -> HD 7770 with FAKEID Method

Sound -> Sound Blaster Audigy 2 ZS -> KxAudioDriver.ket / Board Sound not tested

USB -> Recognizes USB 3.0 devices on any port, USB 2.0 devices are only recognized on USB 3.0 ports.

 

As you can see, I have problems with the USB ports because I can not use USB 2.0 ports with other peripherals (Web Camera, Wireless Keyboard, Wireless Mouse, and others) because it does not recognize them, just recognize USB 3.0 devices. I installed the Calo Fix, Shanee but I still have the same problem.

 

Any suggestions to correct this problem

 

Thank you.

 

 

 

Same problem here...

and... the usb stick or usb hdd is very very very slow....

Link to comment
Share on other sites

please test the new Usb fix, good for me

Perfect USB2 Usb3

delete Dummy ... and GenericUSB

repair permissions and chaches :thumbsup_anim:

Your fix doesn't work for me:

with your patched system.kext - no USB3 and many errors ECH stop-restart

with Shaneee system.kext - errors and no USB at all

Can you share your clean DSDT and your patched DSDT and SSDT, you use?

  • Like 1
Link to comment
Share on other sites

please test the new Usb fix, good for me

Perfect USB2 Usb3

delete Dummy ... and GenericUSB

repair permissions and chaches :thumbsup_anim:

 

 

These kext do not work for my M.O.B.O., the USB ports do not work (3.0 and 2.0) after installation

  • Like 1
Link to comment
Share on other sites

Your fix doesn't work for me:

with your patched system.kext - no USB3 and many errors ECH stop-restart

with Shaneee system.kext - errors and no USB at all

Can you share your clean DSDT and your patched DSDT and SSDT, you use?

 

 

me too.

I have only usb 1...

 

this is the problem:

DummyUSBXHCIPCI.kext - no compatible dependency found for com.apple.iokit.IOUSBHostFamily.
DummyUSBXHCIPCI.kext - no compatible dependency found for com.apple.driver.usb.AppleUSBXHCI.
DummyUSBEHCIPCI.kext - no compatible dependency found for com.apple.driver.usb.AppleUSBEHCI.
DummyUSBEHCIPCI.kext - no compatible dependency found for com.apple.iokit.IOUSBHostFamily.

If I modify config.plist in DummyUSBEHCIPCI.kext with my version:

<key>com.apple.driver.usb.AppleUSBEHCI</key>
<string>1.1</string>
<key>com.apple.iokit.IOACPIFamily</key>
<string>1.4</string>
<key>com.apple.iokit.IOPCIFamily</key>
<string>2.9</string>
<key>com.apple.iokit.IOUSBHostFamily</key>
<string>1.1</string>
<key>com.apple.kpi.bsd</key>
<string>16.7.0</string>
<key>com.apple.kpi.iokit</key>
<string>16.7.0</string>
<key>com.apple.kpi.libkern</key>
<string>16.7.0</string>
<key>com.apple.kpi.mach</key>
<string>16.7.0</string>
<key>com.apple.kpi.unsupported</key>
<string>16.7.0</string>

I have this error:

Prelink failed for com.apple.driver.usb.AppleUSBXHCIPCI; omitting from prelinked kernel.
kxld[com.apple.driver.usb.AppleUSBEHCIPCI]: The following symbols are unresolved for this kext:
kxld[com.apple.driver.usb.AppleUSBEHCIPCI]:     _ml_io_read32
Link failed (error code 5).
Prelink failed for com.apple.driver.usb.AppleUSBEHCIPCI; omitting from prelinked kernel.

Result: No usb2 or usb3.

Can you help me?

  • Like 1
Link to comment
Share on other sites

  • 1 month later...
 Share

×
×
  • Create New...