ArgenLant Posted September 12, 2017 Share Posted September 12, 2017 I'll try both when I get home. So far I'm using slices. Works normal in S/L/E with 10.12.4 kernel. Sent from my Pixel XL using Tapatalk Looks like we need a new kernels for test. BTW, on my intel hackbook 10.12.6 worked not good after update from 10.12.4 and 10.12.5 (clean 10.12.6 install from recovery works better, but not fine), and I'm not sure that latest vanilla kernel and it's sources is good enough. Comparing programs stability in 10.12.3 with 10.12.3 kernel from Shaneee and in 10.12.6 with 10.12.4&10.12.6 kernels from Shaneee I can see more crashes in 10.12.4 and 10.12.6 (and on intel notebook too). Link to comment Share on other sites More sharing options...
Shaneee Posted September 12, 2017 Share Posted September 12, 2017 For those with issues on previous kernel try this. Still the 10.12.6 sources. kernel.zip 7 Link to comment Share on other sites More sharing options...
jm52262 Posted September 12, 2017 Share Posted September 12, 2017 For those with issues on previous kernel try this. Still the 10.12.6 sources. Works on my system, boots up perfectly. 1 Link to comment Share on other sites More sharing options...
tikizondo94 Posted September 12, 2017 Share Posted September 12, 2017 For those with issues on previous kernel try this. Still the 10.12.6 sources. Clover injection works flawless with this one! Smooth as butter. Much appreciated 1 Link to comment Share on other sites More sharing options...
ArgenLant Posted September 13, 2017 Share Posted September 13, 2017 For those with issues on previous kernel try this. Still the 10.12.6 sources. Thank you! It boots with both clover and enoch without problems. 1 Link to comment Share on other sites More sharing options...
jsl Posted September 13, 2017 Share Posted September 13, 2017 (edited) For those with issues on previous kernel try this. Still the 10.12.6 sources. Thanks for this new kernel which works at 10.12.6 in FX-6300 hackintosh. [Edit] This new kernel can wake-up normally from S3 sleep without blank screen or reboot issue. Previous kernel dated on Sept 7 will reboot instantly when I try to wake-up from S3 sleep in FX-6300 hackintosh. However its performance scores by Cinebench R15 were significantly lower than Bronya's kernel dated on Aug 25, 2017. Shan_10126-FX-6300.txt Edited September 16, 2017 by jsl 1 Link to comment Share on other sites More sharing options...
LordSith82 Posted September 13, 2017 Share Posted September 13, 2017 Hello... Can you send me this original kext for 10.12.6 for replace an old usbfix with original? (I've modified or added this kext) AHCIPortInjector.kext AppleBluetoothMultitouch.kext AppleHIDMouse.kext AppleHSSPIHIDDriver.kext AppleIRController.kext AppleRTC.kext AppleStorageDrivers.kext AppleTopCase.kext AppleUSBEthernetHost.kext AppleUSBMultitouch.kext AppleUSBTopCase.kext DummyUSBEHCIPCI.kext DummyUSBXHCIPCI.kext FakeSMC.kext GenericUSBXHCI.kext IOBDStorageFamily.kext IOBluetoothFamily.kext IOBluetoothHIDDriver.kext IOHIDFamily.kext IONetworkingFamily.kext IOSerialFamily.kext IOUSBFamily.kext IOUSBHostFamily.kext IOUSBMassStorageClass.kext IOUSBMassStorageDriver.kext NullCPUPowerManagement.kext RealtekRTL8111.kext System.kext USBInjectAll.kext VoodooHDA.kext Link to comment Share on other sites More sharing options...
XLNC Posted September 13, 2017 Share Posted September 13, 2017 For those with issues on previous kernel try this. Still the 10.12.6 sources. This one works ! Thanks Link to comment Share on other sites More sharing options...
Shaneee Posted September 14, 2017 Share Posted September 14, 2017 Hello... Can you send me this original kext for 10.12.6 for replace an old usbfix with original? (I've modified or added this kext) AHCIPortInjector.kext AppleBluetoothMultitouch.kext AppleHIDMouse.kext AppleHSSPIHIDDriver.kext AppleIRController.kext AppleRTC.kext AppleStorageDrivers.kext AppleTopCase.kext AppleUSBEthernetHost.kext AppleUSBMultitouch.kext AppleUSBTopCase.kext DummyUSBEHCIPCI.kext DummyUSBXHCIPCI.kext FakeSMC.kext GenericUSBXHCI.kext IOBDStorageFamily.kext IOBluetoothFamily.kext IOBluetoothHIDDriver.kext IOHIDFamily.kext IONetworkingFamily.kext IOSerialFamily.kext IOUSBFamily.kext IOUSBHostFamily.kext IOUSBMassStorageClass.kext IOUSBMassStorageDriver.kext NullCPUPowerManagement.kext RealtekRTL8111.kext System.kext USBInjectAll.kext VoodooHDA.kext Just remove USBInjectAll.kext Here are the original Apple Kexts you've mentioned. I've not included the non Apple kexts as you've most likely got them. Original Kexts LordSith82.zip 2 Link to comment Share on other sites More sharing options...
LordSith82 Posted September 16, 2017 Share Posted September 16, 2017 Just remove USBInjectAll.kext Here are the original Apple Kexts you've mentioned. I've not included the non Apple kexts as you've most likely got them. Shaneee, can you send me this original? IOHIDFamily.kext Link to comment Share on other sites More sharing options...
spakk Posted September 16, 2017 Share Posted September 16, 2017 @Shane, I think it's better to send him a download-link with the complete folder as a zip file Link to comment Share on other sites More sharing options...
Shaneee Posted September 17, 2017 Share Posted September 17, 2017 Shaneee, can you send me this original? IOHIDFamily.kext Here you go, IOHIDFamily.kext.zip Also here's a Final 10.12.6 for FX/APU/Athlon etc with SSE4.1 with the System kext if needed, http://www.insanelymac.com/forum/files/file/817-sierra-10126-amd-kernel/ 4 Link to comment Share on other sites More sharing options...
ArgenLant Posted September 21, 2017 Share Posted September 21, 2017 Here you go, IOHIDFamily.kext.zip Also here's a Final 10.12.6 for FX/APU/Athlon etc with SSE4.1 with the System kext if needed, http://www.insanelymac.com/forum/files/file/817-sierra-10126-amd-kernel/ Final kernel 10.12.6 and System.kext works well with both Clover 4200 and Enoch 2900 uname -a Darwin Valentins-Mac-Pro.local 16.7.0 Darwin Kernel Version 16.7.0: Sun 17 Sep 2017 15:51:37 BST; root:xnu-3789.70.16/BUILD/obj/RELEASE_X86_64 x86_64 Thanks a lot for your work! 1 Link to comment Share on other sites More sharing options...
XLNC Posted September 28, 2017 Share Posted September 28, 2017 Bug Report -With the new kernel 10.12.6 by Shaneee, Photoshop CC 2017 crashes instantly when trying to change font.Crash Report: PSCC2017.txt Link to comment Share on other sites More sharing options...
cyrhex Posted September 28, 2017 Share Posted September 28, 2017 Here you go, IOHIDFamily.kext.zip Also here's a Final 10.12.6 for FX/APU/Athlon etc with SSE4.1 with the System kext if needed, http://www.insanelymac.com/forum/files/file/817-sierra-10126-amd-kernel/ Thnx for this shannee,works good on my apu a6 and a10@10.12.6,sleep/resume works as well 1 Link to comment Share on other sites More sharing options...
jsl Posted September 29, 2017 Share Posted September 29, 2017 Here you go, IOHIDFamily.kext.zip Also here's a Final 10.12.6 for FX/APU/Athlon etc with SSE4.1 with the System kext if needed, http://www.insanelymac.com/forum/files/file/817-sierra-10126-amd-kernel/ Thanks for this new AMD kernel which worked perfectly in FX-6300 hackintosh at 10.12.6. Performance is very well, stably, normal wake-up from sleep too ! Link to comment Share on other sites More sharing options...
ctamy Posted October 8, 2017 Share Posted October 8, 2017 Good afternoon,I managed to install macOS Sierra on my PC with Clover Legacy MethodKernel -> Shanee Vrs 10.12.6My specificationsM.O.B.O -> Gigabyte 78LMT-USB3Processor -> AMD FX 8320EGPU -> Sapphire Radeon R7 240 -> HD 7770 with FAKEID MethodSound -> Sound Blaster Audigy 2 ZS -> KxAudioDriver.ket / Board Sound not testedUSB -> Recognizes USB 3.0 devices on any port, USB 2.0 devices are only recognized on USB 3.0 ports.As you can see, I have problems with the USB ports because I can not use USB 2.0 ports with other peripherals (Web Camera, Wireless Keyboard, Wireless Mouse, and others) because it does not recognize them, just recognize USB 3.0 devices. I installed the Calo Fix, Shanee but I still have the same problem.Any suggestions to correct this problemThank you. Link to comment Share on other sites More sharing options...
LordSith82 Posted October 9, 2017 Share Posted October 9, 2017 Good afternoon, I managed to install macOS Sierra on my PC with Clover Legacy Method Kernel -> Shanee Vrs 10.12.6 My specifications M.O.B.O -> Gigabyte 78LMT-USB3 Processor -> AMD FX 8320E GPU -> Sapphire Radeon R7 240 -> HD 7770 with FAKEID Method Sound -> Sound Blaster Audigy 2 ZS -> KxAudioDriver.ket / Board Sound not tested USB -> Recognizes USB 3.0 devices on any port, USB 2.0 devices are only recognized on USB 3.0 ports. As you can see, I have problems with the USB ports because I can not use USB 2.0 ports with other peripherals (Web Camera, Wireless Keyboard, Wireless Mouse, and others) because it does not recognize them, just recognize USB 3.0 devices. I installed the Calo Fix, Shanee but I still have the same problem. Any suggestions to correct this problem Thank you. Same problem here... and... the usb stick or usb hdd is very very very slow.... Link to comment Share on other sites More sharing options...
ydeng Posted October 9, 2017 Share Posted October 9, 2017 Same problem here... and... the usb stick or usb hdd is very very very slow.... Try use DummyUSBEHCIPCI.kext to route usb2 to usb3 and remove all other usb fixes. Link to comment Share on other sites More sharing options...
LordSith82 Posted October 9, 2017 Share Posted October 9, 2017 Try use DummyUSBEHCIPCI.kext to route usb2 to usb3 and remove all other usb fixes. I use a Shaneee USB fix. Link to comment Share on other sites More sharing options...
carlo_67 Posted October 9, 2017 Share Posted October 9, 2017 please test the new Usb fix, good for mePerfect USB2 Usb3delete Dummy ... and GenericUSBrepair permissions and chaches USB fix AMD sierra.zip 2 Link to comment Share on other sites More sharing options...
ArgenLant Posted October 9, 2017 Share Posted October 9, 2017 please test the new Usb fix, good for me Perfect USB2 Usb3 delete Dummy ... and GenericUSB repair permissions and chaches Your fix doesn't work for me: with your patched system.kext - no USB3 and many errors ECH stop-restart with Shaneee system.kext - errors and no USB at all Can you share your clean DSDT and your patched DSDT and SSDT, you use? 1 Link to comment Share on other sites More sharing options...
ctamy Posted October 10, 2017 Share Posted October 10, 2017 please test the new Usb fix, good for me Perfect USB2 Usb3 delete Dummy ... and GenericUSB repair permissions and chaches These kext do not work for my M.O.B.O., the USB ports do not work (3.0 and 2.0) after installation 1 Link to comment Share on other sites More sharing options...
LordSith82 Posted October 15, 2017 Share Posted October 15, 2017 Your fix doesn't work for me: with your patched system.kext - no USB3 and many errors ECH stop-restart with Shaneee system.kext - errors and no USB at all Can you share your clean DSDT and your patched DSDT and SSDT, you use? me too. I have only usb 1... this is the problem: DummyUSBXHCIPCI.kext - no compatible dependency found for com.apple.iokit.IOUSBHostFamily. DummyUSBXHCIPCI.kext - no compatible dependency found for com.apple.driver.usb.AppleUSBXHCI. DummyUSBEHCIPCI.kext - no compatible dependency found for com.apple.driver.usb.AppleUSBEHCI. DummyUSBEHCIPCI.kext - no compatible dependency found for com.apple.iokit.IOUSBHostFamily. If I modify config.plist in DummyUSBEHCIPCI.kext with my version: <key>com.apple.driver.usb.AppleUSBEHCI</key> <string>1.1</string> <key>com.apple.iokit.IOACPIFamily</key> <string>1.4</string> <key>com.apple.iokit.IOPCIFamily</key> <string>2.9</string> <key>com.apple.iokit.IOUSBHostFamily</key> <string>1.1</string> <key>com.apple.kpi.bsd</key> <string>16.7.0</string> <key>com.apple.kpi.iokit</key> <string>16.7.0</string> <key>com.apple.kpi.libkern</key> <string>16.7.0</string> <key>com.apple.kpi.mach</key> <string>16.7.0</string> <key>com.apple.kpi.unsupported</key> <string>16.7.0</string> I have this error: Prelink failed for com.apple.driver.usb.AppleUSBXHCIPCI; omitting from prelinked kernel. kxld[com.apple.driver.usb.AppleUSBEHCIPCI]: The following symbols are unresolved for this kext: kxld[com.apple.driver.usb.AppleUSBEHCIPCI]: _ml_io_read32 Link failed (error code 5). Prelink failed for com.apple.driver.usb.AppleUSBEHCIPCI; omitting from prelinked kernel. Result: No usb2 or usb3. Can you help me? 1 Link to comment Share on other sites More sharing options...
carlo_67 Posted November 15, 2017 Share Posted November 15, 2017 Test please USB-Fix Sierra.zip 1 Link to comment Share on other sites More sharing options...
Recommended Posts