bogdangepe Posted March 19, 2020 Share Posted March 19, 2020 Hi, I need a little help. I managed to install Yosemite, Dell 790 i5 2400, gtx 1060. Everything works, except the gtx1060 video card. I installed nvidia web driver, it loads it but it has no graphics acceleration. El Capitan, Sierra, High Sierra do not manage to install them. I have attached the EFI file, maybe someone can help me make my DSDT. The files are extracted to the origin folder. https://mega.nz/#!k9JHHIaZ!JmuzVfcB6I5QPsbq1FBTUKYZycMBTR2lEXKxv1naw3Y https://mega.nz/#F!lwAxVAoJ!XckwbahrS71yXIxxTpUZTQ Link to comment Share on other sites More sharing options...
bogdangepe Posted March 20, 2020 Share Posted March 20, 2020 I managed to make updates to Sierra from Yosemite. Even so the video card has no graphics acceleration. I installed nvidia web driver. What more needs to be done. So far I have not had any such problem. Link to comment Share on other sites More sharing options...
sonia sudarsono Posted July 21, 2020 Share Posted July 21, 2020 (edited) Good night. I just had a problem installing osx mojave ... creat install media using MBR after successfully making an installation on usb then I install it to the PC and the hard drive is installed then the pc restarts loading again approximately 85% complete then the pc always repeats the restard My EFI clover from you @chris1111 after the IOsconsole error then the white screen appears, the mouse pointer 2 seconds the PC is off and restarts again DELL 780 CORE2DUO E8500 VGA CARD Nvidia GT710 5gb ram hd. 250GB CLOVER.zip Edited July 21, 2020 by sonia sudarsono Link to comment Share on other sites More sharing options...
chris1111 Posted July 23, 2020 Share Posted July 23, 2020 (edited) On 7/21/2020 at 11:10 AM, sonia sudarsono said: Good night. I just had a problem installing osx mojave ... creat install media using MBR after successfully making an installation on usb then I install it to the PC and the hard drive is installed then the pc restarts loading again approximately 85% complete then the pc always repeats the restard My EFI clover from you @chris1111 after the IOsconsole error then the white screen appears, the mouse pointer 2 seconds the PC is off and restarts again DELL 780 CORE2DUO E8500 VGA CARD Nvidia GT710 5gb ram hd. 250GB CLOVER.zip Remove this -no_compat_check from boot args then add this dart=0 Your DSDT.aml is not good Edited July 23, 2020 by chris1111 1 Link to comment Share on other sites More sharing options...
sonia sudarsono Posted July 23, 2020 Share Posted July 23, 2020 5 hours ago, chris1111 said: Remove this -no_compat_check from boot args then add this dart=0 Your DSDT.aml is not good ok sir i will try to reinstall again sir if there is an error again I will look for you back sir thank you for the reply sir Link to comment Share on other sites More sharing options...
sonia sudarsono Posted July 24, 2020 Share Posted July 24, 2020 (edited) There is an error like this, sir ... Please take the solution, sir @chris1111 Edited July 24, 2020 by sonia sudarsono Link to comment Share on other sites More sharing options...
spakk Posted July 24, 2020 Share Posted July 24, 2020 1 hour ago, sonia sudarsono said: @ chris1111 Sister, you are using an older SMBIOS for iMac11,1 from 2009. that is not compatible with Mojave, hence the error message that appears at the bottom of your screen "Mac-F228CC8" Use a compatible SMBIOS that will run with macOS mojave. https://de.wikipedia.org/wiki/IMac Under this link you will find all compatible Macs that are compatible with mojave. Then search for these listed compatible models: iMac: A1418, A1419 iMac Pro: A1862 Mac Pro: A1481 Mac Mini: A1347 MacBook Pro: A1278, A1286, A1398, A1425, A1502, A1706, A1707, A1708 MacBook Air: A1465, A1466 MacBook: A1534 then generate a new smbios for your system using clover configurator.app, then it should boot. Link to comment Share on other sites More sharing options...
sonia sudarsono Posted July 24, 2020 Share Posted July 24, 2020 thank you for the reply ok i will change smbios and tomorrow i will try to install again Link to comment Share on other sites More sharing options...
sonia sudarsono Posted July 24, 2020 Share Posted July 24, 2020 (edited) 28 minutes ago, spakk said: Sister, you are using an older SMBIOS for iMac11,1 from 2009. that is not compatible with Mojave, hence the error message that appears at the bottom of your screen "Mac-F228CC8" Use a compatible SMBIOS that will run with macOS mojave. https://de.wikipedia.org/wiki/IMac Under this link you will find all compatible Macs that are compatible with mojave. Then search for these listed compatible models: iMac: A1418, A1419 iMac Pro: A1862 Mac Pro: A1481 Mac Mini: A1347 MacBook Pro: A1278, A1286, A1398, A1425, A1502, A1706, A1707, A1708 MacBook Air: A1465, A1466 MacBook: A1534 then generate a new smbios for your system using clover configurator.app, then it should boot. Yes sir tomorrow saturday my office is off and at home there is only a windows 10 pc how do i make smbios from win 10 is there any ideas or waiting for monday oh yes sir I connect the PC to the monitor using an HDMI cable, sir Edited July 24, 2020 by sonia sudarsono Link to comment Share on other sites More sharing options...
spakk Posted July 25, 2020 Share Posted July 25, 2020 15 hours ago, sonia sudarsono said: Yes sir tomorrow saturday my office is off and at home there is only a windows 10 pc how do i make smbios from win 10 is there any ideas or waiting for monday oh yes sir I connect the PC to the monitor using an HDMI cable, sir Quite simply, follow these instructions and download these tools to get to your EFI partition and in the end to get to your Config.plist from Windwos operating system. But be careful with these tools! To make the partition of your macOS EFI partitions visible under Windows operating system, you need Partitionwizard tool. For info: The Efi partition is about 200 MB small partition that stands in front of the actual macOS partition of your macOS system, which is created during the creation of the main partition. Download link: https://www.partitionwizard.com/free-partition-manager.html After download, you have to install the tool, then open the program and change the drive letter by right-clicking on the EFI partition in the pulldown menu. Here you have to select and confirm an unused letter. Confirm changes with "yes" and click on "Apply" in the top left of the menu. (if you have any questions, be sure to read the information on the website) The EFI partition is then mounted and is visible in the Explorer. However, without access rights. To get the necessary access rights, you need another tool, the tool is called "Explorer++" Downloadlink: https://explorerplusplus.com/ download the tool and extract the packed file to your desktop, then start the "Explorer++.exe" by right-clicking as administrator. now you have the option to access the files to change or even delete these files. But be careful with these tools! Thanks to German www.hackintosh-forum.de team for this helpful information: (https://www.hackintosh-forum.de/lexicon/entry/108-efi-mit-windows-mounten-und-reparieren/) To change or edit the config.plist under Windows operating system, you need the DiffMerge, here is the download link: https://sourcegear.com/diffmerge/downloads.php Link to comment Share on other sites More sharing options...
sonia sudarsono Posted July 26, 2020 Share Posted July 26, 2020 On 25/7/2020 at 18.03, spakk said: Cukup sederhana, ikuti instruksi ini dan unduh alat-alat ini untuk sampai ke partisi EFI Anda dan pada akhirnya untuk sampai ke Config.plist Anda dari sistem operasi Windwos. Tapi hati-hati dengan alat-alat ini! Untuk membuat partisi partisi MacOS EFI Anda terlihat di bawah sistem operasi Windows, Anda memerlukan alat Partitionwizard. Untuk info: Partisi Efi adalah sekitar 200 MB partisi kecil yang berdiri di depan partisi macOS sebenarnya dari sistem macOS Anda, yang dibuat selama pembuatan partisi utama. Tautan unduhan: https://www.partitionwizard.com/free-partition-manager.htmlSetelah mengunduh, Anda harus menginstal alat, lalu membuka program dan mengubah huruf drive dengan mengklik kanan pada partisi EFI di pulldown Tidak bisa. Di sini Anda harus memilih dan mengkonfirmasi surat yang tidak digunakan. Konfirmasikan perubahan dengan "ya" dan klik "Terapkan" di kiri atas menu. (jika Anda memiliki pertanyaan, pastikan untuk membaca informasi di situs web) Partisi EFI kemudian dipasang dan terlihat di Explorer. Namun, tanpa hak akses. Untuk mendapatkan hak akses yang diperlukan, Anda memerlukan alat lain, alat ini disebut "Explorer ++" Unduh tautan : https://explorerplusplus.com/unduh alat dan ekstrak file yang sudah dikemas ke desktop Anda, lalu mulai "Explorer ++. Exe" dengan mengklik kanan sebagai administrator. sekarang Anda memiliki opsi untuk mengakses file untuk mengubah atau bahkan menghapus file-file ini. Tapi hati-hati dengan alat-alat ini! Terima kasih kepada tim www.hackintosh-forum.de Jerman untuk informasi yang bermanfaat ini: ( https://www.hackintosh-forum.de/lexicon/entry/108-efi-mit-windows-mounten-und-reparieren/ ) Untuk mengubah atau mengedit config.plist di bawah sistem operasi Windows, Anda memerlukan DiffMerge, di sini adalah tautan unduhan: https://sourcegear.com/diffmerge/downloads.php how to be able to edit like this .... while this kind of programming language I do not understand at all Link to comment Share on other sites More sharing options...
sonia sudarsono Posted July 26, 2020 Share Posted July 26, 2020 (edited) On 7/21/2020 at 10:10 PM, sonia sudarsono said: @ chris1111 Good night. I just had a problem installing osx mojave ... to install media using MBR after successfully making an installation on USB then I install it to the PC and the hard drive is installed then the PC restarts loading again about 85% complete then the PC always repeat the clover EFI my clover from you @chris1111 after an IOsconsole error a white screen appears, the mouse pointer 2 seconds the PC turns off 780 CORE2DUO E 8500 VGA CARD Nvidia GT710 5gb ram hd. 250GB CLOVER.zip yesterday I tried to use original clover to have didn't edit anything then I installed an error like this ... 780.zip Edited July 26, 2020 by sonia sudarsono Link to comment Share on other sites More sharing options...
sonia sudarsono Posted July 26, 2020 Share Posted July 26, 2020 On 7/23/2020 at 11:04 AM, chris1111 said: Remove this -no_compat_check from boot args then add this dart=0 Your DSDT.aml is not good if I remove -no_compat_check and replace it with dart = 0 what happens is an error like this Link to comment Share on other sites More sharing options...
spakk Posted July 27, 2020 Share Posted July 27, 2020 I've changed iMac10,1 to iMac15,1, whereby your config.plist needs to be changed according to your hardware spec. I do not known if the current DSDT is from your system? In addition, you should hold down the F4 key while booting with clover Bootloader, so that clover saves various DSDTs in EFI folder under EFI/ACPI/origin , then you should upload this folder so that we can try to adapt your DSDT config.plist Link to comment Share on other sites More sharing options...
chris1111 Posted August 3, 2020 Share Posted August 3, 2020 (edited) Big Sur B3 run on my Optiplex 790 with OpenCore + GeForce GT 710 the system has been installed for more than a week already Everything is perfect and boot twice as fast as Clover with OpenCore Edited August 4, 2020 by chris1111 2 Link to comment Share on other sites More sharing options...
Rocky12 Posted August 3, 2020 Share Posted August 3, 2020 Hi Chris 1111, Bro did you manage to install BS from usb installer or is this the vm Methode 1 Link to comment Share on other sites More sharing options...
chris1111 Posted August 3, 2020 Share Posted August 3, 2020 (edited) 4 minutes ago, Rocky12 said: Hi Chris 1111, Bro did you manage to install BS from usb installer or is this the vm Methode I have no problem to install issue comes at the 2 boot on macOS Installer it not load the count system reboot so I can not pass the 2 boot I have made the SSD BS from my HP Prodesk and put on my Optiplex 790 and Voila Wait to test USB Installer on Beta 4 hope its work for the Dell Optiplex? Edited August 3, 2020 by chris1111 1 Link to comment Share on other sites More sharing options...
Rocky12 Posted August 3, 2020 Share Posted August 3, 2020 I have the Same Probleme can,t get pass the second Stage when i try to install from usb installer Link to comment Share on other sites More sharing options...
chris1111 Posted August 3, 2020 Share Posted August 3, 2020 1 minute ago, Rocky12 said: I have the Same Probleme can,t get pass the second Stage when i try to install from usb installer If you find solution let me know 1 Link to comment Share on other sites More sharing options...
Rocky12 Posted August 3, 2020 Share Posted August 3, 2020 why not of course Link to comment Share on other sites More sharing options...
sonia sudarsono Posted August 5, 2020 Share Posted August 5, 2020 (edited) just give up until here.... do you have a bright idea so we can move up to the level of mojave dell 780 sff coreduo Nvidia GT 710 2GB File EFI dell 780 osx H S https://drive.google.com/drive/folders/1RVQI9ZmvfyB78foEa00bJ0XGsHzTnoS3?usp=sharing Edited August 5, 2020 by sonia sudarsono Link to comment Share on other sites More sharing options...
Recommended Posts