vdubbus77 Posted January 25, 2018 Share Posted January 25, 2018 @vdubbus77 KernelPanic by Lilu !!! Lilu too old. Boot with flag -liluoff -alcoff ... then renew Lilu and AppleALC !!! Update Lilu to version 1.2.1 and AppleALC 1.2.2, then all right! https://github.com/vit9696/AppleALC/releases https://github.com/vit9696/Lilu/releases LayoutID 11 (0B) or even better (NEW) LayoutID 13 (0D) !!!ill will Optiplex works, yes. @for all: First DP Beta 10.13.4 works here, too. Unfortunately this did not work for me. Using -alcoff and -liluoff gets me much further into the boot however it still will not complete the boot. It takes a very long time then just hangs. Link to comment Share on other sites More sharing options...
Aaronation Posted January 27, 2018 Share Posted January 27, 2018 Hello again, So yesterday I got my hands on 2 SSD drives! Thought it would be a great idea to RAID them together in the 0 config. I installed Sierra with no problems, however I cannot seem to boot from the RAID partition using normal clover methods. I just wondered if this was possible at all? The only way I can get into the OS is by using a USB stick to start off with. I also have 2 other drives in the machine both 1TB also in the RAID 0 config. Neither of which seem to show life after the machine powers on. Dell 780 core 2 Duo HD5450 Thanks in advance Link to comment Share on other sites More sharing options...
vdubbus77 Posted January 31, 2018 Share Posted January 31, 2018 Unfortunately this did not work for me. Using -alcoff and -liluoff gets me much further into the boot however it still will not complete the boot. It takes a very long time then just hangs. This is what I am getting now. Did I have some hardware fail at the same time as the update? Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
polyzargone Posted January 31, 2018 Share Posted January 31, 2018 What CPU model do you have? It needs to support SSE4.1 instructions set to run Sierra. Link to comment Share on other sites More sharing options...
vdubbus77 Posted January 31, 2018 Share Posted January 31, 2018 What CPU model do you have? It needs to support SSE4.1 instructions set to run Sierra. The same Xeon I have been running for a year now. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
polyzargone Posted January 31, 2018 Share Posted January 31, 2018 The same Xeon I have been running for a year now. Which is? We need to know the exact model . Link to comment Share on other sites More sharing options...
vdubbus77 Posted January 31, 2018 Share Posted January 31, 2018 Which is? We need to know the exact model . X3360 Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
polyzargone Posted January 31, 2018 Share Posted January 31, 2018 Well it looks OK. Mind to share your EFI/CLOVER folder? Link to comment Share on other sites More sharing options...
leodoct Posted January 31, 2018 Share Posted January 31, 2018 This is what I am getting now. Did I have some hardware fail at the same time as the update? IMG_2016.JPG Sent from my iPhone using Tapatalk This is what I am getting now. Did I have some hardware fail at the same time as the update? IMG_2016.JPG Sent from my iPhone using Tapatalk This is what I am getting now. Did I have some hardware fail at the same time as the update? IMG_2016.JPG Sent from my iPhone using Tapatalk Same problem with my Dell 790/I3/HD5450...But i am able to boot in single user mode from clover. Any advise? Link to comment Share on other sites More sharing options...
chris1111 Posted January 31, 2018 Share Posted January 31, 2018 Same problem with my Dell 790/I3/HD5450...But i am able to boot in single user mode from clover. Any advise? Make a good Signature CPU exact model , Graphics exact brand and VRam what you try 10.12 or 10.13 ? Share EFI of SSD or HD Also share EFI of USB Installer if you try USB Installer Link to comment Share on other sites More sharing options...
leodoct Posted January 31, 2018 Share Posted January 31, 2018 Make a good Signature CPU exact model , Graphics exact brand and VRam what you try 10.12 or 10.13 ? Share EFI of SSD or HD Also share EFI of USB Installer if you try USB Installer Sorry for the delay Well i will provide a more detailed info I made the update via apple web page (.dmg file) not via App Store. After this i got the same as above KP "as.vit9696.Lilu(1.0).... etc" After that i boot in Single user mode from Clover to remove Lilu.kext from S/L/E and when i type "exit" in the console the computer continued to load kexts or whatever (i had also checked -V) and after this booted normally . That means i have back my computer with everything working except audio. So i double checked that the Lilu kexts was removed from S/L/E (from contents, plugins also) and rebooted. Unfortunatelly i got the same KP "as.vit9696.Lilu(1.0).... etc" I rebooted again in single user mode and searched for Lilu.kext everywhere in S/L/E and there wasn't present at all. So i am in this state now. If the computer reboots normally i have the above KP, but it is working normally if i boot in single user mode after typing "exit" in the console. I attach the config.plist and the system info .spx file for further information but with a short description the machine is iMac 12,1 Intel core I3 and Graphics Hd 5450 XFX silent 1GB . Any help would be welcome. I forgot to say that i have tried and installed the latest ALC.kext and Lilu.kext (both of them 1.2.2. release) as advised in previous posts without any result. I have also removed the ALC.kext from EFI/Clover/Kexts/10.12 (i am runing Sierra 10.12.6) Dell790.zip Link to comment Share on other sites More sharing options...
chris1111 Posted January 31, 2018 Share Posted January 31, 2018 Sorry for the delay Well i will provide a more detailed info I made the update via apple web page (.dmg file) not via App Store. After this i got the same as above KP "as.vit9696.Lilu(1.0).... etc" After that i boot in Single user mode from Clover to remove Lilu.kext from S/L/E and when i type "exit" in the console the computer continued to load kexts or whatever (i had also checked -V) and after this booted normally . That means i have back my computer with everything working except audio. So i double checked that the Lilu kexts was removed from S/L/E (from contents, plugins also) and rebooted. Unfortunatelly i got the same KP "as.vit9696.Lilu(1.0).... etc" I rebooted again in single user mode and searched for Lilu.kext everywhere in S/L/E and there wasn't present at all. So i am in this state now. If the computer reboots normally i have the above KP, but it is working normally if i boot in single user mode after typing "exit" in the console. I attach the config.plist and the system info .spx file for further information but with a short description the machine is iMac 12,1 Intel core I3 and Graphics Hd 5450 XFX silent 1GB . Any help would be welcome. witch Intel core I3 ? see bios infos about CPU I demand complet EFI your put config.plist Link to comment Share on other sites More sharing options...
leodoct Posted January 31, 2018 Share Posted January 31, 2018 witch Intel core I3 ? see bios infos about CPU I demand complet EFI your put config.plist Ok sorry, this is my EFI and the CPU is Core i3 2120 3.30GHz. EFI.zip Link to comment Share on other sites More sharing options...
chris1111 Posted January 31, 2018 Share Posted January 31, 2018 Ok sorry, this is my EFI and the CPU is Core i3 2120 3.30GHz. Just try this config.plist is patch for Radeon HD 5450 rename config.plist let me know if its work config 5450.plist.zip 1 Link to comment Share on other sites More sharing options...
vdubbus77 Posted January 31, 2018 Share Posted January 31, 2018 Well it looks OK. Mind to share your EFI/CLOVER folder? EFI.zip Link to comment Share on other sites More sharing options...
leodoct Posted January 31, 2018 Share Posted January 31, 2018 Well it looks OK. Mind to share your EFI/CLOVER folder? No problem, but i am in share screen with the computer and i do not risk to make a reboot remotely. So i will go to my work tomorrow to make a try with your config.plist and respond. Thanks for your effort i will reply ASAP Link to comment Share on other sites More sharing options...
chris1111 Posted January 31, 2018 Share Posted January 31, 2018 Just try this config.plist is patch for Radeon HD 5450 rename config.plist let me know if its work what about this config 5450.plist.zip Link to comment Share on other sites More sharing options...
leodoct Posted February 1, 2018 Share Posted February 1, 2018 what about this Didn't manage to make any trial today but tomorrow i will. So i will update Thanks again 1 Link to comment Share on other sites More sharing options...
leodoct Posted February 2, 2018 Share Posted February 2, 2018 Didn't manage to make any trial today but tomorrow i will. So i will update Thanks again Well everything OK. I used chris1111's config 5450.plist and booted normally WITH Audio. Many many thanks for your effort. 1 Link to comment Share on other sites More sharing options...
leodoct Posted February 2, 2018 Share Posted February 2, 2018 Well everything OK. I used chris1111's config 5450.plist and booted normally WITH Audio. Many many thanks for your effort. One more question if anybody knows . is there any budget Low Profile Graphics card (silent preferred & without extra power connector) that can play 4K@60Hz in Dell 780 or Dell790 O.O.B full working with at least two digital outputs HDMI-DVI? I have two Dell Hackintoshes (780-790) and want to use one of them as Home Theater P.C. with Kodi. Thanks. Link to comment Share on other sites More sharing options...
chris1111 Posted February 2, 2018 Share Posted February 2, 2018 One more question if anybody knows . is there any budget Low Profile Graphics card (silent preferred & without extra power connector) that can play 4K@60Hz in Dell 780 or Dell790 O.O.B full working with at least two digital outputs HDMI-DVI? I have two Dell Hackintoshes (780-790) and want to use one of them as Home Theater P.C. with Kodi. Thanks. Not sure for the 4K ? Gigabyte Geforce GT 710 OR Zotac Geforce GT 1030 (webDrivers) I have both card for my 790 Optiplex 1 Link to comment Share on other sites More sharing options...
vdubbus77 Posted February 3, 2018 Share Posted February 3, 2018 Well it looks OK. Mind to share your EFI/CLOVER folder? Has anyone had time to look at mine? Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
chris1111 Posted February 3, 2018 Share Posted February 3, 2018 Has anyone had time to look at mine? Sent from my iPhone using Tapatalk You can try this EFI I am not touch the DSDT Edit ***** you have the Geforce GT 1030 so I guess the WebDrivers are well install The config.plist is according to this 1 Link to comment Share on other sites More sharing options...
vdubbus77 Posted February 4, 2018 Share Posted February 4, 2018 You can try this EFI I am not touch the DSDT Edit ***** you have the Geforce GT 1030 so I guess the WebDrivers are well install The config.plist is according to this Still doesn't boot. thanks for the attempt. This update must have screwed something up bad. I guess I will need to reinstall, just a shame this system has been up since El Capitan. Link to comment Share on other sites More sharing options...
chris1111 Posted February 4, 2018 Share Posted February 4, 2018 Still doesn't boot. thanks for the attempt. This update must have screwed something up bad. I guess I will need to reinstall, just a shame this system has been up since El Capitan. Reinstall fresh and used My EFI and retry Update for the GT 1030 You have to boot nv_disable=1 for Update thats it 1 Link to comment Share on other sites More sharing options...
Recommended Posts