MacPeet Posted December 12, 2017 Author Share Posted December 12, 2017 small info: my Optiplex had no problems with 10.13.2 and 10.13.3 DP1 (with SSD and APFS) everything works well Roolback for the HD5450 without InjectorGPU still needed. Optiplex 1 Link to comment Share on other sites More sharing options...
chris1111 Posted December 13, 2017 Share Posted December 13, 2017 Thank you so much for hard testing. Have a great day chris 나의 LG-F800S 의 Tapatalk에서 보냄 I did another test tonight without the Saphire Graphics Radeon 5570 I'm plugging into the Dysplay Port PC and it works perfectly too. Intel HD 3000 I have no IG Platform value, no Fake ID; I boot with an imac 14.2 and a Mac Mini 5.1 and the result is the same. Pics boot MacMini 5.1 Pics boot iMac 14.2 Here are my tests are done, nice work thank you I attaching the boot log Clover r 4351 with iMac 14.2 my last boot IM142 Clover Log.txt.zip 1 Link to comment Share on other sites More sharing options...
Sherlocks Posted December 13, 2017 Share Posted December 13, 2017 I did another test tonight without the Saphire Graphics Radeon 5570 I'm plugging into the Dysplay Port PC and it works perfectly too. Intel HD 3000 I have no IG Platform value, no Fake ID; I boot with an imac 14.2 and a Mac Mini 5.1 and the result is the same. Pics boot MacMini 5.1 Pics boot iMac 14.2 Here are my tests are done, nice work thank you I attaching the boot log Clover r 4351 with iMac 14.2 my last boot Thank you so much for test 나의 LG-F800S 의 Tapatalk에서 보냄 Link to comment Share on other sites More sharing options...
Sherlocks Posted December 13, 2017 Share Posted December 13, 2017 @chris1111 long time ago, i remember that you said when enter snow leopard, will get black screen. now, sandy laptop is no problem for snow leopard. still not clear desktop hd 3000 for snow. i'm searched macmini information for snow https://www.ifixit.com/Answers/View/58958/Snow+Leopard+on+Mac+Mini+2011 according to ifixit, only works hdmi port. your display connector hdmi? if it's true, can you test this if you have a free time? smbios macmini5,1 or macmini5,3 fakeid clover default platform id 0x00030010 fakeid clover default platform id 0x00030020 also if you get black screen, i wonder when you get black. example after -v(verbose) log, get black screen? or something. thanks Link to comment Share on other sites More sharing options...
chris1111 Posted December 13, 2017 Share Posted December 13, 2017 @chris1111 long time ago, i remember that you said when enter snow leopard, will get black screen. now, sandy laptop is no problem for snow leopard. still not clear desktop hd 3000 for snow. i'm searched macmini information for snow https://www.ifixit.com/Answers/View/58958/Snow+Leopard+on+Mac+Mini+2011 according to ifixit, only works hdmi port. your display connector hdmi? if it's true, can you test this if you have a free time? smbios macmini5,1 or macmini5,3 fakeid clover default platform id 0x00030010 fakeid clover default platform id 0x00030020 also if you get black screen, i wonder when you get black. example after -v(verbose) log, get black screen? or something. thanks Yes I think this is my issue because my PC on bord its Display Port, I don't have HDMI I try all possibility for snow and this is not working for my PC I try the both value at the end of boot its SNB Frambufer did not show Up , Not load 1 Link to comment Share on other sites More sharing options...
Deanor30 Posted December 19, 2017 Share Posted December 19, 2017 Hey Folks, When I upgrade my Dell760 from 10.13.1 to 10.13.2 I am getting kernel panics that i feel is related to the ACPI. Please see screengrab attached. Has anyone any suggestions of fixes regarding this panic. Link to comment Share on other sites More sharing options...
chris1111 Posted December 19, 2017 Share Posted December 19, 2017 Hey Folks, When I upgrade my Dell760 from 10.13.1 to 10.13.2 I am getting kernel panics that i feel is related to the ACPI. Please see screengrab attached. Has anyone any suggestions of fixes regarding this panic. Update Lilu and AppleALC 1 Link to comment Share on other sites More sharing options...
Deanor30 Posted December 20, 2017 Share Posted December 20, 2017 Update Lilu and AppleALC Thanks Chris, Updated both and that fixed my bootloop and Sound. Has anyone experienced any issues with the Opltiplex 755 just randomly rebooting. I have a 755 running a quad core cpu, Gt710 nvideo graphics card and 6 gb of memory and every so often it will just lock up and reboot. I have checked activity logs etc and I cannot find any recurring error that can give me any reason why it is rebooting. I have Hwmonitor running to see can I see might it be a thermal issue but temps seem to be normal. I have tried different cpu's, memory and video cards and the hackintosh is still just randomly rebooting. Can anyone suggest anything that might help me find what is causing this issue. 1 Link to comment Share on other sites More sharing options...
sajiddesigner Posted December 27, 2017 Share Posted December 27, 2017 Hello I am trying to install Mac OS High Sierra on Dell Optiplex 780 (tower) desktop Specs are: Dell Optiplex 780 (tower)4GB DDR3 RamCore2Duo ProcessorATI Radeon HD5450 512MBI have created Bootable Usb, Clover method, copied kexts, config.plist and DSDT from http://www.insanelym...60-755-790-990/and http://www.insanelymac.com/forum/topic/312656-guide-macos-sierra-1012-dell-optiplex-780-760-755-790-990/page-47#entry2484626 I tried using bootflags GraphicsEnabler=Yes/Nonpci=0x2000 and npci=0x3000Replaced kexts and used different versions of FakeSMC but no success. My Screen doesnot stuck at DSMOS has arrived.. After this line, 2 or 3 more lines show up very fast and then display is vanished from screen.See panics video here: https://www.facebook...56304726097446/ Please help.. Link to comment Share on other sites More sharing options...
MacPeet Posted December 27, 2017 Author Share Posted December 27, 2017 What is your CPU? Sierra and HighSierra need SSE4.1, Core2Duo 7200 or Core2Quad 8200 or higher. Post your EFI folder here! Link to comment Share on other sites More sharing options...
sajiddesigner Posted December 27, 2017 Share Posted December 27, 2017 What is your CPU? Sierra and HighSierra need SSE4.1, Core2Duo 7200 or Core2Quad 8200 or higher. Post your EFI folder here! What is SSE4.1 I have core2Duo 7200 Link to comment Share on other sites More sharing options...
MacPeet Posted December 27, 2017 Author Share Posted December 27, 2017 7200 is good Post your EFI folder here! Link to comment Share on other sites More sharing options...
sajiddesigner Posted December 27, 2017 Share Posted December 27, 2017 Hello,Please find attached zip file for EFI file. I have added few other Kexts to solve the issue but they did'nt worked. These extra kexts are USBInjector, NULLCPUPowerManagement, IOPCIFamily.kext, IOAHCIFamily.kext, Intel82566MM.kext, AppleIntelE1000e.kext, FakeSMC.kext (copied from RehabMans git), AMDRadeonX3000.kext, AMD5000Controller.kext Another issue i have found is, USB is not detected from Back USB ports. Only front USB ports are working at the moment,.. EFI.zip Link to comment Share on other sites More sharing options...
MacPeet Posted December 27, 2017 Author Share Posted December 27, 2017 Clover version currently? Install Clover with the following selection: Install Clover in the ESP Bootloader / Install boot0af in the MBR CloverEFI / Clover EFI 64Bit SATA Drivers64UEFI / EmuVariableUefi-64 Drivers64UEFI / OsxAptioFixDrv-64 Drivers64UEFI / PartitionDxe-64 Install RC Scripts in Target Volume try this: CLOVER.zip Link to comment Share on other sites More sharing options...
sajiddesigner Posted December 27, 2017 Share Posted December 27, 2017 HelloThank you for sharing CLover.zipSorry i don't have Mac available right now.. creating bootable using TransMacI will check Clover version and share with you shortly.. Also try the files you provided me and update you accordingly.. Link to comment Share on other sites More sharing options...
sajiddesigner Posted December 27, 2017 Share Posted December 27, 2017 I have updated your files, but still having same issue.See video at: https://www.facebook.com/groups/hackintosch/permalink/10156308343202446/BIO and CPU info: https://www.facebook.com/photo.php?fbid=10215099693710024&set=p.10215099693710024&type=3&theater&ifg=1 My clover version is 2.4K, rev 4207Build: 2017-09-11 22:12:53I have rechecked. My CPU is E8400 Core 2 Duo Link to comment Share on other sites More sharing options...
sajiddesigner Posted December 28, 2017 Share Posted December 28, 2017 Clover version currently? Install Clover with the following selection: Install Clover in the ESP Bootloader / Install boot0af in the MBR CloverEFI / Clover EFI 64Bit SATA Drivers64UEFI / EmuVariableUefi-64 Drivers64UEFI / OsxAptioFixDrv-64 Drivers64UEFI / PartitionDxe-64 Install RC Scripts in Target Volume try this: CLOVER.zip Hello friend. I have tried another install. Downloaded latest Sierra.app and created another bootable USB. I have put all the kexts, config.plist and DSDT from this post http://www.insanelymac.com/forum/topic/312656-guide-macos-sierra-1012-dell-optiplex-780-760-755-790-990/ But still it is showing DSMOS has arrived error. i have used kexts GraphicsEnabler=NO/Yes npci=0x2000 and npci=0x3000 but not luck. can you please guide me now. Link to comment Share on other sites More sharing options...
chris1111 Posted December 28, 2017 Share Posted December 28, 2017 @sajiddesigner make a signature of complete hardware you have See my sign 1 Link to comment Share on other sites More sharing options...
sajiddesigner Posted December 29, 2017 Share Posted December 29, 2017 @sajiddesigner make a signature of complete hardware you have See my sign Sure friend.. DOING.. Link to comment Share on other sites More sharing options...
chris1111 Posted December 29, 2017 Share Posted December 29, 2017 Sure friend.. DOING.. Ok try Fresh Install, 10.12.6 Install Clover ESP like in the image Change the file in EFI by the fille attaching You need Plug the screen on DVI or HDMI Hope that work EDIT**** I have also put DSDT for trying if the previous one not working I remove Trying DSDT its for 790 Dell Optiplex DELL-CLOVER ATI 5450 512mb.zip Link to comment Share on other sites More sharing options...
sajiddesigner Posted December 29, 2017 Share Posted December 29, 2017 Ok try Fresh Install, 10.12.6 Install Clover ESP like in the image Change the file in EFI by the fille attaching Hope that work Sure friend. I am on way to home. Will try this and update you.. Thank you for your support.. 1 Link to comment Share on other sites More sharing options...
chris1111 Posted December 29, 2017 Share Posted December 29, 2017 Sure friend. I am on way to home. Will try this and update you.. Thank you for your support.. EDIT**** I have also put DSDT for trying if the previous one not working I remove Trying DSDT its for 790 Dell Optiplex EDIT*** You need Plug the screen on DVI or HDMI Link to comment Share on other sites More sharing options...
sajiddesigner Posted December 29, 2017 Share Posted December 29, 2017 Ok try Fresh Install, 10.12.6 Install Clover ESP like in the image Change the file in EFI by the fille attaching You need Plug the screen on DVI or HDMI Hope that work EDIT**** I have also put DSDT for trying if the previous one not working I remove Trying DSDT its for 790 Dell Optiplex friend it didn't worked.. Now i am trying Hackintosh Zone method. may be that will work fine. Can you please suggest any other 1GB or 512 MB Graphic card that is compatible with Sierra or High Sierra. Link to comment Share on other sites More sharing options...
chris1111 Posted December 29, 2017 Share Posted December 29, 2017 friend it didn't worked.. Now i am trying Hackintosh Zone method. may be that will work fine. Can you please suggest any other 1GB or 512 MB Graphic card that is compatible with Sierra or High Sierra. Dont try distro Watts not working ? Post picture of boot screen Link to comment Share on other sites More sharing options...
sajiddesigner Posted December 29, 2017 Share Posted December 29, 2017 EDIT**** I have also put DSDT for trying if the previous one not working I remove Trying DSDT its for 790 Dell Optiplex EDIT*** You need Plug the screen on DVI or HDMI Hello, I have now added WhateverGreen.kext along with your clover.zip file Now in verbose mode every thing went fine.. Point last stuck at kextd stall [0] (240s) 'AppleACPICPU' kextd stall [1] (240s) ... kextd stall [2] (240s) ... Stucked at black screen ending with above 3 lines for 5- 10 minutes.. Since then it is stucked at Black Screen with apple white logo and loader. Mouse Cursor has vanished and no progress is being shown since last 15 minutes.. Dont try distro Watts not working ? Post picture of boot screen I am booting again and creating a video for you... Link to comment Share on other sites More sharing options...
Recommended Posts