polyzargone Posted August 23, 2017 Share Posted August 23, 2017 @chris1111 So it's 15. DSDT injection prevails over Clover's injection. You should check what System Report says in Audio panel. You should see Identifiant audio : 15 instead of Identifiant audio : 16 Best is not use Clover's injection at all when something is defined in DSDT IMHO… Link to comment Share on other sites More sharing options...
MacPeet Posted August 23, 2017 Author Share Posted August 23, 2017 not good Delete inject in Clover's config (empty field) Uncheck Fix_HDA in Clover's config Only use the inject in the DSDT. LayoutID 15 is hex 0F "layout-id", Buffer (0x04) { 0x0F, 0x00, 0x00, 0x00 }, LayoutID 16 is Hex 10 "layout-id", Buffer (0x04) { 0x10, 0x00, 0x00, 0x00 }, try this 1 Link to comment Share on other sites More sharing options...
chris1111 Posted August 23, 2017 Share Posted August 23, 2017 not good Delete inject in Clover's config (empty field) Uncheck Fix_HDA in Clover's config Only use the inject in the DSDT. LayoutID 15 is hex 0F "layout-id", Buffer (0x04) { 0x0F, 0x00, 0x00, 0x00 }, LayoutID 16 is Hex 10 "layout-id", Buffer (0x04) { 0x10, 0x00, 0x00, 0x00 }, try this Ok good now its Show Internal Speaker and My Bluthoot also is there Thank you MacPeet 1 Link to comment Share on other sites More sharing options...
MacPeet Posted August 23, 2017 Author Share Posted August 23, 2017 Autodetect headphone also works? Please connect HP to the front connector! Link to comment Share on other sites More sharing options...
chris1111 Posted August 23, 2017 Share Posted August 23, 2017 Autodetect headphone also works? Please connect HP to the front connector! Yes Headphones in French is Écouteurs Works But Kernel Panic 10.12.6 I need change the Lilu kext no KP in BETA 7 2 Link to comment Share on other sites More sharing options...
MacPeet Posted August 23, 2017 Author Share Posted August 23, 2017 Perfect Thank you for your work. I will add new codec layoutID 16 in the next release AppleALC. KP: Change to Lilu Release 1.1.6 This is compatible Link to comment Share on other sites More sharing options...
chris1111 Posted August 23, 2017 Share Posted August 23, 2017 Perfect Thank you for your work. I will add new codec layoutID 16 in the next release AppleALC. KP: Change to Lilu Release 1.1.6 This is compatible Yes Lilu Release 1.1.6 works 10.12.6 no Issue Only one thing, I Lost menue in the top bar After change Before change Link to comment Share on other sites More sharing options...
MacPeet Posted August 23, 2017 Author Share Posted August 23, 2017 After changing from Lilu or after changing to layoutID 16? Maybe it's better later with the next release. Link to comment Share on other sites More sharing options...
chris1111 Posted August 23, 2017 Share Posted August 23, 2017 After changing from Lilu or after changing to layoutID 16? Maybe it's better later with the next release. After changing from Lilu or after changing to layoutID 16? Maybe it's better later with the next release. After change Layout Thats not really important Link to comment Share on other sites More sharing options...
MacPeet Posted August 23, 2017 Author Share Posted August 23, 2017 Ok, I've tried with 780. Here is the problem is not. The current SourceCode of AppleALC and Lilu are perhaps not quite finished yet. Let's wait for the release's. Link to comment Share on other sites More sharing options...
chris1111 Posted August 23, 2017 Share Posted August 23, 2017 Ok, I've tried with 780. Here is the problem is not. The current SourceCode of AppleALC and Lilu are perhaps not quite finished yet. Let's wait for the release's. Thanks Great work anyway 1 Link to comment Share on other sites More sharing options...
MacPeet Posted August 23, 2017 Author Share Posted August 23, 2017 layoutID 16 is added in the next Release 1.1.4 for Optiplex790/990 2 Link to comment Share on other sites More sharing options...
Quinzie XO Posted August 23, 2017 Share Posted August 23, 2017 No one ? For real ? Link to comment Share on other sites More sharing options...
lucsansag Posted August 23, 2017 Share Posted August 23, 2017 I'm trying to install Sierra in an Optiplex 755 with a Xeon X3363, 8 GB of RAM, GeForce 210, BIOS version A21 (didn't work with A22 either). I'm getting kernel panic after NVDAStartup, if I boot in Safe Mode I get: "devfs_kernel_mount kernel_mount failed 2, process 1 exec of /sbin/launchd failed, errno 2" Any ideas? Link to comment Share on other sites More sharing options...
polyzargone Posted August 23, 2017 Share Posted August 23, 2017 I have managed to install Sierra on to my Optiplex 790 Ultra Small factor. I have even managed to get proper power management working (I think), Now for DSDT edits, which fixes are needed ? What else do you need to fix? Graphics works perfect but detected as "HD5000" It's just cosmetic but you can fix that by installing WhateverGreen.kext. I'm trying to install Sierra in an Optiplex 755 with a Xeon X3363, 8 GB of RAM, GeForce 210, BIOS version A21 (didn't work with A22 either). I'm getting kernel panic after NVDAStartup, if I boot in Safe Mode I get: "devfs_kernel_mount kernel_mount failed 2, process 1 exec of /sbin/launchd failed, errno 2" Any ideas? Make sure you're using the correct files : config.plist_755.zip & DSDT.aml_755_for_other_graphics_cards.zip Also, it's best to use the latest Bios version IMO. 1 Link to comment Share on other sites More sharing options...
El Capitan Posted August 23, 2017 Share Posted August 23, 2017 layoutID 16 is added in the next Release 1.1.4 for Optiplex790/990 @MacPeet Is the rear input and front (microphone) input working with (autoswitch) layoutID 16/0x10 when using Optiplex790/990? I developed the AppleALC for the Dell Precision T1600 Workstation. I'm certain that the ALC269VB High Definition Audio Driver is the same for the Precision T1600 and OptiPlex 790/990. The layoutID for Dell Precision T1600 Workstation is 11/0x0B: would you try this value on your Optiplex790/990. I've tried layoutID 15/0x0F on my Dell Precision T1600 Workstation and it functions correctly. LayoutID 16/0x10 works, but the output volume is low and the front microphone does not function. I can also confirm that the Optiplex 780 and the HD5450 functions correctly (with video acceleration) on macOS High Sierra beta 7: when video rollback is used. Link to comment Share on other sites More sharing options...
MacPeet Posted August 24, 2017 Author Share Posted August 24, 2017 No, the Mic's are not in SwitschMode. Not so important with the mic's. Many users work with Mic from the webcam. I can not tell if Precision and Optiplex are the same. I have no Precision, no Optiplex790 or 990. I myself can not test. Maybe chris1111 can try. Often, the power of the Mic connectors is too weak. Often, only pre-amplified microphones work. Yes, Optiplex780 with HD5450 and Roolback works very well with High Sierra. Unfortunately WhateverGreen.kext does not help. try yourself, maybe you can make it even better Resources.zip try this config for Switch Mic´s Link to comment Share on other sites More sharing options...
El Capitan Posted August 24, 2017 Share Posted August 24, 2017 Thank you MacPeet! I tried the config that you suggested [Pinconfigs.kext info.plist Optiplex790/990 Version 2]: <01B71C20 01B71D40 01B71E11 01B71F90 01871C30 01871D90 01871EA1 01871F90 01971C40 01971D90 01971E81 01971F01 02171C50 02171D40 02171E21 02171F02> I am pleased to announce that everything functions correctly. Headphone switching works; rear input and output works - tested by doing a looped recording, the rear input only accepts pre-amplified sources. Front microphone input (and monitoring) works. 1 Link to comment Share on other sites More sharing options...
lucsansag Posted August 24, 2017 Share Posted August 24, 2017 What else do you need to fix? It's just cosmetic but you can fix that by installing WhateverGreen.kext. Make sure you're using the correct files : config.plist_755.zip & DSDT.aml_755_for_other_graphics_cards.zip Also, it's best to use the latest Bios version IMO. I'm using these indeed.I keep getting the "NVDAStartup: Official" line even when using nv_disable=1 Link to comment Share on other sites More sharing options...
polyzargone Posted August 24, 2017 Share Posted August 24, 2017 @lucsansag If I remember correctly, it's normal to see "NVDAStartup: Official" even when using nv_disable=1. You should see something like "NVDAStartup: disable with boot-arg nv_disable" a few lines after . It's probably something else. Link to comment Share on other sites More sharing options...
lucsansag Posted August 24, 2017 Share Posted August 24, 2017 This is what I can get before it starts scrolling too fast: http://i.imgur.com/MjaemEs.jpg And then I can only catch this: http://i.imgur.com/oJUmLRc.jpg http://i.imgur.com/Rd6BixX.jpg Link to comment Share on other sites More sharing options...
nguyendj Posted August 24, 2017 Share Posted August 24, 2017 dell_optiplex_780.png dell_sierra.png dell_sierra_gm.png beta1_10_12_6.png Note: Sierra supports only CPUs with SSE4 support, example: my Q9400 or my Q8200 working with Sierra. Core2Duo E7200 / Core2Quad Q8200 or higher works as well. See CPU-X.app for your CPU !!! SMBIOS MacPro3,1 is no longer supported with Sierra. Change to iMac10,1 and generate Serial, MLB and board serial number! HD5450 works with Sierra without problems, GT610 not more works with Sierra!!! 1. Download Install 10.12 Developer Preview.app (GM: macOS Sierra.app) 2. CreateInstall USB flash drive (8GB) with terminal (If problems with USB, then create internal Install HDD): sudo /Applications/Install\ 10.12\ Developer\ Preview.app/Contents/Resources/createinstallmedia --volume /Volumes/USB --applicationpath /Applications/Install\ 10.12\ Developer\ Preview.app --nointeractionor with final or later sudo /Applications/Install\ macOS\ Sierra.app/Contents/Resources/createinstallmedia --volume /Volumes/USB --applicationpath /Applications/Install\ macOS\ Sierra.app --nointeraction 3. Install Clover 3985 or later for Sierra-Support to your Install medium (Legacy-Method): Bootloader / Install boot0af in the MBR CloverEFI / Clover-EFI 64Bit SATA Drivers64UEFI / EmuVariableUefi-64 Drivers64UEFI / OsxAptioFixDrv-64 Drivers64UEFI / PartitionDxe-64 4. Copy your config.plist and DSDT from your Capitan HDD or SSD or new users from here DSDT.aml insert to EFI/Clover/ACPI/patched/ config.plist insert to EFI/Clover/ Example Optiplex780/760: DSDT.aml.zip (optimized for Core2Duo, configured for HD5450 and Audio LayoutID 11 (0B) for AppleALC. Additionally Framebuffer in the Clover is "Shrike" for the HD 5450) my_Optiplex_DSDT.aml.zip (my DSDT, optimized for Core2Quad, configured for HD5450 and Audio LayoutID 11 (0B) for AppleALC. Additionally Framebuffer in the Clover is "Shrike" for the HD 5450) my_Optiplex_config.plist.zip (Create serial number, board serial number, MLB, ROM) Generic 760/780: Generic_DSDT.aml.zip (Not Patched for HD5450 Video, for other graphics cards. Audio is LayoutID 11 (0B) for AppleALC) config.plist_for_other_graphics_cards.zip (Not Patched for HD5450 Video, for other graphics cards. Create serial number, board serial number, MLB, ROM) Example Optiplex755: DSDT.aml_755.zip (configured for HD5450 and Audio LayoutID 28 (1C) for Trial-AppleALC see below. Additionally Framebuffer in the Clover is "Shrike" for the HD 5450) config.plist_755.zip (Create serial number, board serial number, MLB, ROM) DSDT.aml_755_for_other_graphics_cards.zip Example Optiplex790: 790.zip (Patched DSDT (PEG0) for HD5450, config: Create serial number, board serial number, MLB, ROM) DSDT.aml_790_LayoutID15.zip (for Sound with AppleALC - LayoutID 15 (0F)) DSDT.aml_790_LayoutID28.zip (for on-the-fly-Sound with Clover, LayoutID 28 (1C)) Example Optiplex990: DSDT_and_config_for_Optiplex990.zip (Patched DSDT (PEG0) for HD5450, Sound with AppleALC - LayoutID 15 (0F), config: Create serial number, board serial number, MLB, ROM) 5. Create folders 10.12 in EFI/Clover/kexts/ 6. Copy your kexts of your Capitan HDD or SSD to EFI/Clover/kexts/10.12/ Example760/780: these are my kexts for 10.12: 10.12.zip 7. Now Sierra install on your HDD or SSD (Partitions with Guid scheme) after installation: 8. Terminal (for unsigned apps): sudo spctl --master-disable 9. Install Clover on your HDD or SSD (Legacy-Method): Bootloader / Install boot0af in the MBR CloverEFI / Clover-EFI 64Bit SATA Drivers64UEFI / EmuVariableUefi-64 Drivers64UEFI / OsxAptioFixDrv-64 Drivers64UEFI / PartitionDxe-64 Install RC Scripts In Target Volume optional: Install Clover in the ESP Theme, free choice Install Clover Preference Pane 10. Copy your config.plist, DSDT and folder 10.12 to your Sierra HDD or SSD after installation sound: Please ask if you have problems with the AppleALC method! It is not hard to get it right. optional Audio Optiplex780/760: since version 1.0.13.Release (and later) now with appleALC with LayoutID 11 (0B) AppleALC.kext_1.1.1.RELEASE_inkl_new_PlugIn_Lilo.kext_1.1.0.zip new Codec LayoutID 13 (0D) for 780/760 (autodetect) http://www.insanelymac.com/forum/topic/312656-guide-macos-sierra-1012-dell-optiplex-780-760-755-790-990/page-44?do=findComment&comment=2483386 or older method on_the_fly_Paket_Dell_Optiplex_780_(760)_10.12_Sierra_276_26.zip LayoutID 1 (01) optional Audio Optiplex755: trial_AppleALC.kext_Optiplex755.zip LayoutID 28 (1C) please report (If no one tries and reports, then nothing comes in the next release of the AppleALC. So far no users for experiments, a pity.) optional Audio Optiplex790 and 990: since version 1.0.19.Release (and later) now with appleALC with LayoutID 15 (0F) AppleALC.kext_1.1.1.RELEASE_inkl_new_PlugIn_Lilo.kext_1.1.0.zip or older method on_the_fly_Audio_Optiplex790_10.12_Sierra_276_26.zip LayoutID 28 (1C) Night Shift Patch: http://www.insanelymac.com/forum/topic/312656-guide-macos-sierra-1012-dell-optiplex-780-760-755-790-990/page-26?do=findComment&comment=2398751 Tested graphics cards with Sierra: My XFX on HD5450: with DSDT patch and frame buffer "Shrike" works great with HDMI audio and Sleep in the Optiplex780 My HD6570: works OOB including HDMI audio My Nvidia GT610: works OOB only up to 10.11.6, with Sierra no support My EVGA Nvidia GT210: works with Inject Nvidia with Sierra, but no HDMI audio possible other User with GT710 Zotac GeForce GT 1030 2Gig OOB Web Drivers only (@chris1111) http://www.insanelymac.com/forum/topic/312656-guide-macos-sierra-1012-dell-optiplex-780-760-755-790-990/page-44?do=findComment&comment=2478188 If you have other graphics cards for Optiplex or for other computers working with Sierra, then please report! Tested WLAN: PCIe: TP-Link TL-WDN4800 N900 WLAN Dual Band up to 450Mbit/s to 2.4GHz or 5GHz, works OOB as Airport PCI: TP-Link TL-WN851ND 300Mbit/s, works as Airport, thanks Maggo AtherosWiFiInjector.kext.zip USB: TP-Link TL-WN725N Nano WLAN USB Adapter 150Mbit/s, not as AirPort Developer Beta program: [How-To] macOS Sierra Developer Beta program without special registration, if anyone is interested! here.gif com.apple.seeding.plist.zip Copies the com.apple.seeding.plist file to / Library / Preferences / (not S/L/P) and open Terminal: sudo softwareupdate --set-catalog https://swscan.apple.com/content/catalogs/others/index-10.12seed-10.12-10.11-10.10-10.9-mountainlion-lion-snowleopard-leopard.merged-1.sucatalog.gzsee AppStore/Updates Attention! With DP Beta1 10.12.4 a new Clover version is required. At least 3985! Credits/Sources: InsanelyMac root86 Slice for the Clover Bootloader pepto, polyzargone, morpheousman, Chris1111, owbp and all others for all Optiplex 780 (760) Guides! have fun, Optiplex Should we have guide High Sierra in another topic? Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
polyzargone Posted August 24, 2017 Share Posted August 24, 2017 @nguyendj Please, don't quote the full post #1 . As for High Sierra, there's no specific thread for it but I see you're using a 5450 HD so you'll need to rollback some kexts (see here) otherwise it won't work at all. Consequently, you'll need an already installed OS X/macOS to do this. Unless you change your GPU. That being said, this guide should work the same for High Sierra (if you stick to HFS+ instead of APFS which needs some extra steps). 1 Link to comment Share on other sites More sharing options...
nguyendj Posted August 24, 2017 Share Posted August 24, 2017 @nguyendj Please, don't quote the full post #1 . As for High Sierra, there's no specific thread for it but I see you're using a 5450 HD so you'll need to rollback some kexts (see here) otherwise it won't work at all. Consequently, you'll need an already installed OS X/macOS to do this. Unless you change your GPU. That being said, this guide should work the same for High Sierra (if you stick to HFS+ instead of APFS which needs some extra steps). My bad sorry There is “if”, that why I recommend new topic. It’s easier to newbie at Hackintosh or Fresh install OSX HS Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
polyzargone Posted August 24, 2017 Share Posted August 24, 2017 I agree we need a new topic . Volunteers wanted!!! Link to comment Share on other sites More sharing options...
Recommended Posts