morpheousman Posted February 3, 2017 Share Posted February 3, 2017 Works! All inputs, outputs good as with ID 11. Changed DSDT to Layout 15, used new AppleALC.Kext. System Report showing Layout ID 15. 1 Link to comment Share on other sites More sharing options...
MacPeet Posted February 3, 2017 Author Share Posted February 3, 2017 Very well, then I give it to the developers for the AppleALC of the future. Perfect!!!!!!!! 1 Link to comment Share on other sites More sharing options...
morpheousman Posted February 5, 2017 Share Posted February 5, 2017 I just installed Sierra on my Optiplex 780. I cannot get the AppleALC sound working. I am using Layout ID 11. Maybe using the wrong kext? Link to comment Share on other sites More sharing options...
MacPeet Posted February 5, 2017 Author Share Posted February 5, 2017 RealtekALC.kext deleted from on-the-fly? Kext-To-Patch entries deleted from the on-the-fly in the Clover? 0B (11) in DSDT? Link to comment Share on other sites More sharing options...
morpheousman Posted February 5, 2017 Share Posted February 5, 2017 RealtekALC.kext deleted from on-the-fly? Kext-To-Patch entries deleted from the on-the-fly in the Clover? 0B (11) in DSDT? Was a fresh install of Sierra, but used Time Machine backup to restore apps. I thought the AppleHDA.kext would be clean? No edits in Kexts-To-Patch, DSDT is 0B. System settings confirms LayoutID 11. AppleALC.kext from link on first page, here.... http://www.insanelym...-3#entry2284794 About to give up and use_the_fly. lol Thought AppleALC was supposed to be easier? Link to comment Share on other sites More sharing options...
MacPeet Posted February 5, 2017 Author Share Posted February 5, 2017 AppleHDA.kext must be original from your Sierra version! How up-to-date is your Cloverversion with Sierra for the KextInject? I have the AppleALC now in Clovers Kext folder 10.12 Perhaps too old now. https://github.com/vit9696/AppleALC/releases try 1.0.18.Release 1 Link to comment Share on other sites More sharing options...
morpheousman Posted February 6, 2017 Share Posted February 6, 2017 AppleHDA.kext must be original from your Sierra version! How up-to-date is your Cloverversion with Sierra for the KextInject? I have the AppleALC now in Clovers Kext folder 10.12 Perhaps too old now. https://github.com/vit9696/AppleALC/releases try 1.0.18.Release Okay, sound is working. I made a dumb mistake. Link to comment Share on other sites More sharing options...
morpheousman Posted February 6, 2017 Share Posted February 6, 2017 Now another big bug that I have had before. Sleep Issues. Computer sleeps, but the it wakes from sleep, their is no video. :wallbash: I am using HDMI. Using DSDT.aml from Post #1, and Clover.config from post #1. No Video when waking from sleep. Tried other DSDT I have used before, ..... No Video when waking from sleep . :wallbash: Link to comment Share on other sites More sharing options...
noobiehack Posted February 6, 2017 Share Posted February 6, 2017 Hi! IDK if this is offtopic but I have a radeon 5450 graphics card and a MSI H61m-p31/w8 mobo. Can I get this to work in sierra by using your configs and DSDT? Link to comment Share on other sites More sharing options...
polyzargone Posted February 6, 2017 Share Posted February 6, 2017 Hi! IDK if this is offtopic but I have a radeon 5450 graphics card and a MSI H61m-p31/w8 mobo. Can I get this to work in sierra by using your configs and DSDT? DSDT is hardware specific as it's extracted directly from Bios so in short : No. You'd better follow this topic to enable your HD 5450 : http://www.insanelymac.com/forum/topic/293049-guide-mavericks-yosemite-amd-radeon-hd5450/ Good luck ! Link to comment Share on other sites More sharing options...
noobiehack Posted February 6, 2017 Share Posted February 6, 2017 DSDT is hardware specific as it's extracted directly from Bios so in short : No. You'd better follow this topic to enable your HD 5450 : http://www.insanelymac.com/forum/topic/293049-guide-mavericks-yosemite-amd-radeon-hd5450/ Good luck ! Thank you sir! This is my first time in hackintoshing 1 Link to comment Share on other sites More sharing options...
MacPeet Posted February 6, 2017 Author Share Posted February 6, 2017 good news: Codec for 790 LayoutID 15 now permanently included in AppleALC source. In the next release 1.0.19 then officially for the future. See here: https://github.com/vit9696/AppleALC @morpheousman Sleep works great for me. Have you tried with your old DSDT and config.plist of the Capitan thread? Link to comment Share on other sites More sharing options...
morpheousman Posted February 6, 2017 Share Posted February 6, 2017 @morpheousman Sleep works great for me. Have you tried with your old DSDT and config.plist of the Capitan thread? Yes. I have tried that, tried the original DSDT from jake lo that we started with. Tried a couple that polyzargone edited for me. Tried your DSDT. This is the 780 that I use for my media center. It never had El Capitan on it. It has the exact same video card as the one that I had El Capitan on, Saphire Radeon HD5450 1GB. 780 that I had El Capitan on is gone now, and replaced by my 790, but I took the Video card out before I sold it, and it is in my 790. Both 780's were twins, exact same box, CPU, memory, same Video Card. This 780 I upgraded from Yosemite to Sierra. It will go into sleep, power shuts down all the way until power light is flashing. It will wake from bluetooth. Just no video when it wakes. With all the different DSDT's and settings in Clover that I have tried, it has not had video even one time after waking from sleep, and I have tried dozens of times I just put the Yosemite hard drive back on it, and it sleeps and wakes with no problems. So now I have a hard drive for it with a fresh install of Sierra, but I cannot use it because it has no video when it wakes from sleep. Link to comment Share on other sites More sharing options...
MacPeet Posted February 7, 2017 Author Share Posted February 7, 2017 You had this problem earlier, right? At that time you changed darkwake in the Clover, I can remember. Link to comment Share on other sites More sharing options...
morpheousman Posted February 7, 2017 Share Posted February 7, 2017 Yes. at that time I changed Darkwake=1. I tried That. Tried different darkwake settings. Computer will sleep with almost every DSDT i have used, or clover settings. No problem going to sleep, just no video when it wakes. Strange, because I have read that for the most part, the HD5450 are not supposed to have this problem. I remember with El Capitan, I tried frame buffer "Eulmur", and had the same problem, but Shrike worked. Not sure what I should try next? Generic DSDT and check to inject ATI? Generic DDST and manual edit the kexts? Try injecting a fake ID? My cards are twins, but one was purchased about a year later. I don't think they changed the firmware? Last firmware version I could find for Saphire Radeon HD5450 is around 2012. I saw that problems with other cards were solved by setting built in graphics as primary, set 32mb memory, and CSM set to always. Also saw a post where a user made a guide for Saphire Radeon HD5450. Had issues solved in El Capitan, but could not solve problems in Sierra, and now downgraded to El Capitan. https://www.tonymacx86.com/threads/guide-enabling-ati-radeon-hd-5450.180817/ No problems with my 790 sleep function, Link to comment Share on other sites More sharing options...
HazemTarek Posted February 8, 2017 Share Posted February 8, 2017 it work perfect without any problems on optiplex 755 but i have a problem, sierra don't save any setting i tried repair permissions but i can't do it , i tried all thing any solution ? Link to comment Share on other sites More sharing options...
MacPeet Posted February 8, 2017 Author Share Posted February 8, 2017 @HazemTarek The error is known. Make settings and restart. Repeat until it is accepted. @ For all 780/760/790 users New release AppleALC 1.0.19 !!! Now also officially integrated Optiplex790 with LayoutID 15. download 1.0.19.RELEASE.zip here: https://github.com/vit9696/AppleALC/releases 2 Link to comment Share on other sites More sharing options...
morpheousman Posted February 9, 2017 Share Posted February 9, 2017 @HazemTarek The error is known. Make settings and restart. Repeat until it is accepted. @ For all 780/760/790 users New release AppleALC 1.0.19 !!! Now also officially integrated Optiplex790 with LayoutID 15. download 1.0.19.RELEASE.zip here: https://github.com/vit9696/AppleALC/releases Awesome stuff! My 790/990 DSDT DSDT.aml.zip Link to comment Share on other sites More sharing options...
MacPeet Posted February 9, 2017 Author Share Posted February 9, 2017 Update: 10.12.4 DP Beta2 16E154a works 1 Link to comment Share on other sites More sharing options...
rtvkris1 Posted February 14, 2017 Share Posted February 14, 2017 10.12.4 beta2 works...hm...is ok..only avi ,,mkv etc - not works ,,vlc,,Elmedia not works,,,very big problem (optiplex755) beta 1 to same Link to comment Share on other sites More sharing options...
MacPeet Posted February 14, 2017 Author Share Posted February 14, 2017 No problem here with currently Beta 2 avi, mkv, mv4, mp4, mpeg, all works with vlc This error is in your system! More information please! Please fill in your forum signature!!! More information on the DSDT, config.plist and graphics card, please! Link to comment Share on other sites More sharing options...
rtvkris1 Posted February 14, 2017 Share Posted February 14, 2017 germany forum hackintosh to same problem..vlc no works in 10.12.4..My devices: dell optiplex755 ,gt630 2gb full CI,webdriver - ok, 8GB Ram ,ssd 240gb plus ssd 120gb, smbios -iMac 10,1,works very fine Sierra 10.12.3 6D32 ,clover 4003, sound usb2 ext,dsdt is General this forum pages 1 and config. the strange thing is that it works great 10.12.3.Move started very long time ,,only weryfikation and weryfikation and weryfikation... . Sorry my english Link to comment Share on other sites More sharing options...
MacPeet Posted February 15, 2017 Author Share Posted February 15, 2017 Vielleicht liegts an den Webtreibern oder am USB Audio. Arbeitet die GT630 nicht ohne Webtreiber? Ich habe die HD5450, Audio mit AppleALC und Clover ist noch auf Version 3985 und bei mir arbeitet alles. Keinerlei Probleme mit VLC. Maybe it's the webdrivers or the USB audio. Does the GT630 not work without a webdriver? I have the HD5450, audio with AppleALC and Clover is still on version 3985 and with me everything works. Link to comment Share on other sites More sharing options...
rtvkris1 Posted February 17, 2017 Share Posted February 17, 2017 hi, ok my friends..yes ,,problem is web driver Nvidia,, already it is alright ,,thnx! Link to comment Share on other sites More sharing options...
MacPeet Posted February 17, 2017 Author Share Posted February 17, 2017 Very good. Now works VLC with avi, mkv ... ??? Link to comment Share on other sites More sharing options...
Recommended Posts