Blaggah Posted January 21, 2017 Share Posted January 21, 2017 @vdv try this: Trial2_AppleALC.kext_for_Dell_T3500.zip LayoutID 28 @Blaggah try this: Trial_AppleALC.kext_for_HP_XW8600.zip Sorry, Blaggah, LayoutID is 28 (1C). Totally forgotten. Thanks MacPeet, I'll give it a try later on. Thanks. ====Update.. Your AppleALC kext gave me sound. Great work man, i really appreciate it. Link to comment Share on other sites More sharing options...
vdv Posted January 22, 2017 Share Posted January 22, 2017 @MacPeet - just a note. If I check volume (top right), volume and Output devices are greyed out. I don't know if it can help. I already tried "light" dsdt and config.plist, tried again all AppleALC but now results. Link to comment Share on other sites More sharing options...
MacPeet Posted January 22, 2017 Author Share Posted January 22, 2017 Do you have with LayoutID 11 any devices? (11 (0B) is codec for Optiplex) Link to comment Share on other sites More sharing options...
vdv Posted January 22, 2017 Share Posted January 22, 2017 The only device I'm setting layout is the HDEF. I'm using 1C Device (HDEF) { Name (_ADR, 0x001B0000) Method (_DSM, 4, NotSerialized) { Store (Package (0x04) { "layout-id", Buffer (0x04) { 0x1C, 0x00, 0x00, 0x00 }, "PinConfigurations", Buffer (Zero) {} }, Local0) DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0)) Return (Local0) } } Link to comment Share on other sites More sharing options...
MacPeet Posted January 22, 2017 Author Share Posted January 22, 2017 Yes, right, 1C is 28. Everything was right. I thought you can also try the Codec LayoutID 11 once. Edit: @vdv Try this: Trial4_AppleALC.kext_for_Dell_T3500.zip LayoutID 12 Please change the LayoutID in the DSDT to 12 (0C). Maybe LayoutID 28 is not good, because all devices are there. Link to comment Share on other sites More sharing options...
vdv Posted January 22, 2017 Share Posted January 22, 2017 I tested Trial4, with layoutID (0C) No audio and no control. Also with LayoutID (1C) , no audio and no control. In System Report/Audio there are no DEVICES Trial4 with layoutID (0B), No audio BUT CONTROL. With 0B I can see Devices under System Report/Audio Link to comment Share on other sites More sharing options...
MacPeet Posted January 22, 2017 Author Share Posted January 22, 2017 Now I am at a loss. No more ideas at the moment. Edit: Please check in the terminal with kextstat whether AppleHPET and AppleLPC are loaded! This is important. Another try with patched AppleHDA. Please ensure the original AppleHDA. The kext is patched to LayoutID 1 (01 in DSDT). patched_AppleHDA_ADI1984A_T3500_10.12_Sierra_276_26.kext.zip Link to comment Share on other sites More sharing options...
vdv Posted January 22, 2017 Share Posted January 22, 2017 Both loaded. 40 0 0xffffff7f82906000 0x3000 0x3000 com.apple.driver.AppleHPET (1.8) 2CFB49B8-4CC2-320B-9C6E-99646DFD8571 <11 7 5 4 3> 92 0 0xffffff7f827b7000 0x3000 0x3000 com.apple.driver.AppleLPC (3.1) F51595F0-F9B1-3B85-A1C3-F984DAD4107E <83 12 5 4 3> I'll back up original AppleHDA, remove AppleALC, change layout to 01. Link to comment Share on other sites More sharing options...
vdv Posted January 22, 2017 Share Posted January 22, 2017 No sound (either from front or back), after installing AppleHDA, removing AppleALC, Chanced layout to 01, repaired permissions, reboot. Strange thing. No output but internal speaker. Do I need Audio Injection to be "1" in config.plist? I tried with and without but nothing changes. Link to comment Share on other sites More sharing options...
henrikpewpew Posted January 22, 2017 Share Posted January 22, 2017 Thank you for this guide! It works well with the Optiplex 960 as well. Link to comment Share on other sites More sharing options...
Blaggah Posted January 22, 2017 Share Posted January 22, 2017 After you remove tho old kexts? Make sure to fix permissions and cache. And try again. Link to comment Share on other sites More sharing options...
polyzargone Posted January 22, 2017 Share Posted January 22, 2017 Do I need Audio Injection to be "1" in config.plist? I tried with and without but nothing changes. No you don't. DSDT.aml edits prevails over Clover's Device Audio injection . That's why this the first place you have to make edits . Link to comment Share on other sites More sharing options...
goodguess Posted January 22, 2017 Share Posted January 22, 2017 One more thing about the HD6350. This is HWinfo´s output. Seems there are a few HD6XXX cards with a Cedar (pro) chipset. Can someone please confirm about the Asus WL-138G V2 aka BCM 4318? I was using the card up to 10.9 as my LAN for one of the Optiplex 780 does work or not. (Bad cabling and not much I can do about it.) Was the BCM 4318 support finally dropped with Sierra or is there a workaround? Link to comment Share on other sites More sharing options...
vdv Posted January 23, 2017 Share Posted January 23, 2017 @ Blaggah. Permission fixed with kext wizard. Anything else I should fix? @ polyzargone. Thanks I'll do a new installation checking all files again. Link to comment Share on other sites More sharing options...
Blaggah Posted January 23, 2017 Share Posted January 23, 2017 I used easy kext pro to install my kexts. I deleted the old kexts from S/L/E folder and empty the trash. Then I installed the new ones. Also make sure that you don't have any other audio kexts in the Other folder in Clover folder. After new kexts installed with Easykext pro, it will fix and repair permissions automatically for you. Then you could reboot. Link to comment Share on other sites More sharing options...
goodguess Posted January 24, 2017 Share Posted January 24, 2017 For those who did not try. Its save to upgrade to 10.12.3 no issues so far. Link to comment Share on other sites More sharing options...
runo Posted January 25, 2017 Share Posted January 25, 2017 Macpeet, my ATI 5450 1gb will not work with your DSDT for XFX 5450, clover boot gets stuck on "enable legacy matching" line. Can you adjust it to work on my general 5450? Link to comment Share on other sites More sharing options...
MacPeet Posted January 25, 2017 Author Share Posted January 25, 2017 It is known some HD5450 will not work with this patch. My has DDR3 Ram, some with DDR2 Ram does not work as I could see. This is mine: 1002_68F9.rom.zip This graphic card has been working since Yosemite with this patch. Note: 10.12.3 also with me without problems! Link to comment Share on other sites More sharing options...
Blaggah Posted January 25, 2017 Share Posted January 25, 2017 @vdv Any luck m8? Link to comment Share on other sites More sharing options...
runo Posted January 25, 2017 Share Posted January 25, 2017 It is known some HD5450 will not work with this patch. My has DDR3 Ram, some with DDR2 Ram does not work as I could see. This is mine: HD5450.gif 1002_68F9.rom.zip This graphic card has been working since Yosemite with this patch. Note: 10.12.3 also with me without problems! Mine is same everything but ROPs/TMUs is 2/8, Bus Interface is x16 1.1@x16 1.1, slightly different bios version and device id ending. It is DDR3 too. What do I adjust in DSDT or config file? Help me! Link to comment Share on other sites More sharing options...
polyzargone Posted January 25, 2017 Share Posted January 25, 2017 Mine is same everything but ROPs/TMUs is 2/8, Bus Interface is x16 1.1@x16 1.1, slightly different bios version and device id ending. It is DDR3 too. What do I adjust in DSDT or config file? Help me! Mind to post your CLOVER folder please ? Link to comment Share on other sites More sharing options...
runo Posted January 26, 2017 Share Posted January 26, 2017 Mind to post your CLOVER folder please ? My CLOVER folder is follow macpeet's exactly. I worry mine is Dell 780 SFF motherboard, different to macpeet's normal size motherboard. Can you fix the macpeet CLOVER folder to suit my Dell 780 SFF and 5450 video card? Link to comment Share on other sites More sharing options...
polyzargone Posted January 26, 2017 Share Posted January 26, 2017 My CLOVER folder is follow macpeet's exactly. I worry mine is Dell 780 SFF motherboard, different to macpeet's normal size motherboard. Can you fix the macpeet CLOVER folder to suit my Dell 780 SFF and 5450 video card? Well, MacPeet did not attached his CLOVER folder but he gave every steps to have a working one. I'm asking yours because you may have mistaken following those steps. No offense, I just want to be sure things has been handled correctly in the first place . Using a 780 SFF model shouldn't make any differences whatsoever. 1 Link to comment Share on other sites More sharing options...
vdv Posted January 26, 2017 Share Posted January 26, 2017 @Blaggah; no luck. Installed all from scratch, all kext, all layouts. No sound. Crazy thing; whenever I use Voodoo, it works! In any case I'm looking around, asking for sum suggestions. When (and If) I'll have results I'll post them. Ciao Link to comment Share on other sites More sharing options...
Blaggah Posted January 26, 2017 Share Posted January 26, 2017 @vdv that's strange man. Don't give up man, sometimes you may have overlook something. I hope you uncover it sooner than later. Link to comment Share on other sites More sharing options...
Recommended Posts