MacPeet Posted December 1, 2016 Author Share Posted December 1, 2016 @ Mirone For only Office and Internet is also the HD5450 very good. We use this card all for Optiplex. Does not work OOB, but with DSDT Vanilla Patch this card works with all versions, including Sierra and HDMI audio and sleep (Update safe). HD5450 is very cheap on the market. 1 Link to comment Share on other sites More sharing options...
Deanor30 Posted December 1, 2016 Share Posted December 1, 2016 @macpeet, I tested the sound from front port and back and they work. I connected a Mic that was working with Voodoohda and they do not work on either. Master volume on both cannot be adjusted. I have a USB webcam that contains a Mic and that is working. Link to comment Share on other sites More sharing options...
MacPeet Posted December 1, 2016 Author Share Posted December 1, 2016 Ok, thanks, with webcam at least super. @ Deanor30 (Please fill your signature with the hardware details!) try this for Mic/LineIn: File deleted, no longer relevant! Edit: Do not feel like further attempts? Nobody with 755 ready? Without perfection of the audio codec I will not add this to the release. Link to comment Share on other sites More sharing options...
Ricky000 Posted December 5, 2016 Share Posted December 5, 2016 Hello, First time hackintosh. Hardware: the same as MacPeet. Even the video card. USB as installer. Latest Clover r3949 First boot from hard drive , stuck at the apple logo (0%) Link to comment Share on other sites More sharing options...
Deanor30 Posted December 5, 2016 Share Posted December 5, 2016 @Macpeet, I tried the revised kext and the Microphone still does not work. Do i still have to edit the DSDT.aml file with the new layout ID? Link to comment Share on other sites More sharing options...
polyzargone Posted December 5, 2016 Share Posted December 5, 2016 Hello, First time hackintosh. Hardware: the same as MacPeet. Even the video card. USB as installer. Latest Clover r3949 First boot from hard drive , stuck at the apple logo (0%) Post the EFI folder (zip it) of your USB stick please. 1 Link to comment Share on other sites More sharing options...
MacPeet Posted December 5, 2016 Author Share Posted December 5, 2016 @Deanor30 No, in your DSDT I already had LayoutID 28 registered. Ok, I'll see if I find something. Thanks for the trial. Update: macOS Sierra DP Beta 5 16C60b works without problems Link to comment Share on other sites More sharing options...
Ricky000 Posted December 8, 2016 Share Posted December 8, 2016 Post the EFI folder (zip it) of your USB stick please. Thanks for your response. After days research, finally I switch to ASUS HD5450(1G) from the XFX HD 5450(1G), and everything works very well right now. This idea coming from @bclinton who mention XFX HD 5450's problem in [Guide] DELL 780 EL CAPITAN. Thanks all the information in this topic. Thank you all. Link to comment Share on other sites More sharing options...
MacPeet Posted December 8, 2016 Author Share Posted December 8, 2016 very beautiful However, XFX one HD5450 1GB works without problems with me in DELL Optiplex780 MT with Yosemite, Capitan and Sierra. Update: macOS Sierra DP Beta 6 16C63a works without problems Link to comment Share on other sites More sharing options...
CrazyCreator Posted December 10, 2016 Share Posted December 10, 2016 I have the E7500 CPU in my Optiplex ... Working with Sierra or not? Link to comment Share on other sites More sharing options...
polyzargone Posted December 10, 2016 Share Posted December 10, 2016 I have the E7500 CPU in my Optiplex ... Working with Sierra or not? Yes . It has SSE4.1 instruction set. Link to comment Share on other sites More sharing options...
Drpw Posted December 10, 2016 Share Posted December 10, 2016 Hello all and first thanks MacPeet for this awesome guide. I've used it for a Dell 755 (q35) with Core2Duo E8400, 2GB of DDR2@800 (will get more soon, got 2 empty dimm) and Gigabyte HD5450(fanless). I've used your DSDT, kexts and Config.plist from OP and works like a bliss (been unable to even boot at 10.11 or 10.12 trying other DSDTs and boot flags). If you want the boot logs or whatever to check compatibility on other desktops I'll upload it Link to comment Share on other sites More sharing options...
bocajoe Posted December 10, 2016 Share Posted December 10, 2016 @runo Compare DSDT and config.plist and the Kext's from Post#1 !!! @kilo23 You can also update from the Capitan. (only SMBIOS iMac10,1, SMBIOS MacPro3,1 not works) 1. Backup from Capitan!!! 2. Before, install new Clover in Capitan, sample version 3773. 3. All Kext's to EFI/Clover/kexts/10.11/ and to EFI/Clover/kexts/10.12/ !!! 4. SIP 0x67 5. Download macOS Sierra from appstore and run 6. After restarting, switch to the installer in the CloverBootloader 7. The rest as always. After the installation, audio no longer works. See Post#1 for more info. Hi MacPeet! I am going to try to update to Sierra from El Capitan on my Dell 780, SMBIOS 10,1, HD5450 Question: On Step 2, What settings do you use to install Clover on the El Capitan before installing Sierra? These were the options I used when installing El Capitan: Install Clover in ESP Install boot0af in MBR CloverEFI 64-Bits SATA Themes, Select BootCamp Install RC Scripts In Target Volume Install Clover Preference Pane or do I use these options for Step 2 onto my El Capitan Hard Drive before Sierra install Bootloader / Install boot0af in the MBR CloverEFI / Clover-EFI 64Bit SATA Drivers64UEFI / EmuVariableUefi-64 Drivers64UEFI / OsxAptioFixDrv-64 Drivers64UEFI / PartitionDxe-64 Do I use the same Clover options for Step 2? Link to comment Share on other sites More sharing options...
MacPeet Posted December 11, 2016 Author Share Posted December 11, 2016 @Drpw My DSDT and config.plist from post # 1 is only for 780/760. Perhaps in the Capitan thread a DSDT for 755? @bocajoe Clover version must be current, with Sierra support. I currently have 3944. Use the options you used before. so then: Install Clover in ESP Install boot0af in MBR CloverEFI 64-Bits SATA Themes, Select BootCamp Install RC Scripts In Target Volume Install Clover Preference Pane Link to comment Share on other sites More sharing options...
Drpw Posted December 12, 2016 Share Posted December 12, 2016 @Drpw My DSDT and config.plist from post # 1 is only for 780/760. Perhaps in the Capitan thread a DSDT for 755? nope, the one from the OP worked, I know since I'm using Shrike framebuffer, which is in the OP one. I thought that it might be 780 one while I was already booting installer, but it booted and looked fine so I went ahead, and it works fine. Generated serial for SMBIOS on Clover Configurator and got iCloud, iMessage all working. It works good so I didn't think about using the other one 1 Link to comment Share on other sites More sharing options...
Ricky000 Posted December 13, 2016 Share Posted December 13, 2016 My specs: Intel Core 2 Duo E8400 @ 3.0GHz 8G RAM ASUS HD 5450 1G DSDT downloading from post#1 TP-Link TL-WN851ND works very well. With this card installed, I have to sacrifice the VGA port which is not a big deal for me. BIOS version A15 Hi all, after couple of days testing, There are still two issues I can't figure out. I think I need you guys help. Sleep/Wake: The whole system sleep well but can't wake from sleep(No video signal) Sound: I use AppleALC (Version 1.0.18) and change the to "0B" in DSDT file HDEF section. Right now sound over HDMI works(can't adjust the volume, but for me it's ok). On-board speaker not work, and Microphone not work. The attached files are the My DSDT and config.plist . Thanks in advance. Archive.zip Link to comment Share on other sites More sharing options...
Maggo Posted December 14, 2016 Share Posted December 14, 2016 Yeah, I have the same problem with wake and videosignal! In EL Captain I had the same problem, I did not find any solution.. Link to comment Share on other sites More sharing options...
MacPeet Posted December 14, 2016 Author Share Posted December 14, 2016 @Ricky000 You have "0B" (11) in DSDT file HDEF and in the Clover at AudioInject LayoutID 1. Delete the LayoutID 1 in the Clover! You have in the Clover Inject Nividia on, not necessary with HD5450. Remove this. Update: macOS 10.12.2 16C67 works Link to comment Share on other sites More sharing options...
Ricky000 Posted December 14, 2016 Share Posted December 14, 2016 @Ricky000 You have "0B" (11) in DSDT file HDEF and in the Clover at AudioInject LayoutID 1. Delete the LayoutID 1 in the Clover! You have in the Clover Inject Nividia on, not necessary with HD5450. Remove this. Update: macOS 10.12.2 16C67 works Thanks for your reply, right now all the sound and mic works. I set both Inject Nvidia and Inject ATI "FALSE". Wake from sleep still not work. By the way, my pc is DELL 780 SFF, do you think it matters? Thanks for your update again, I am trying upgrade to macOS 10.12.2. The attached file is my IoREGISTRY, Really appreciate your help. iMac io.zip Link to comment Share on other sites More sharing options...
MacPeet Posted December 15, 2016 Author Share Posted December 15, 2016 Do you have under System Settings / Energy for Sleep? Do you have USB devices on the computer? (WLAN / BT?) These can also prevent sleep. Update: macOS 10.12.3 DP Beta 1 16D12b works Link to comment Share on other sites More sharing options...
Ricky000 Posted December 16, 2016 Share Posted December 16, 2016 graphics.png Energy.png Do you have under System Settings / Energy for Sleep? Do you have USB devices on the computer? (WLAN / BT?) These can also prevent sleep. Update: macOS 10.12.3 DP Beta 1 16D12b works Thanks for your reply. Tried what you mentioned, wake from sleep still not work. I don't have WLAN OR BT usb device. But I do plan to buy USB bluetooth adapter and Apple Magic Trackpad Link to comment Share on other sites More sharing options...
Maggo Posted December 17, 2016 Share Posted December 17, 2016 @Mac Peet The sleep/wake works just fine for the system, but not for the graphics card. The problem is that you don't have a picture after wake. Link to comment Share on other sites More sharing options...
MacPeet Posted December 18, 2016 Author Share Posted December 18, 2016 I have no problems with Sleep and my XFX HD5450 (connected HDMI), all works. Maybe the Asus HD5450 from Ricky000 is different? Link to comment Share on other sites More sharing options...
Maggo Posted December 20, 2016 Share Posted December 20, 2016 My wake also does not work. I have the go green bulk hd5450 2gb, so you might be right. Might someone with working wake write down his chip vendor id? Link to comment Share on other sites More sharing options...
MacPeet Posted December 20, 2016 Author Share Posted December 20, 2016 My is XFX one HD5450 1GB, Ven: 1002 Dev: 68F9, works with DSDT-Device-Vanilla-Patch without problems, including sleep. Vanilla-Device-Patch to 68E0 and Framebuffer "Shrike", Dual Link 1 and Inject ATI works here, connected via HDMI cable. Has been working so since Yosemite. Update: macOS 10.12.3 DP Beta 2 16D17a works 1 Link to comment Share on other sites More sharing options...
Recommended Posts