larabee Posted February 19, 2017 Share Posted February 19, 2017 I gave PowerColor Rx 480 Devil 8GB a try. Is my result normal or too low? Link to comment Share on other sites More sharing options...
Derondalf Posted February 20, 2017 Share Posted February 20, 2017 Hi, Can somebody help me please? I have got green lines instead of few buttons and my MSI AMD RX 470 4gb not working after modification info.plist in AMD9500Controller.kext and AMDRadeonX4000.kext. I have no idea how to solve this problem. You can see it in the PICTURE Link to comment Share on other sites More sharing options...
Ur-Quan Posted February 20, 2017 Share Posted February 20, 2017 I have got green lines instead of few buttons and my MSI AMD RX 470 4gb not working after modification info.plist in AMD9500Controller.kext and AMDRadeonX4000.kext. AMDRadeonX4100.kext. Do not forget to rebuild system extensions caches with Kext Utility. Otherwise try to spoof fake device ID with Clover instead of touching system files. 1 Link to comment Share on other sites More sharing options...
Derondalf Posted February 20, 2017 Share Posted February 20, 2017 AMDRadeonX4100.kext. Do not forget to rebuild system extensions caches with Kext Utility. Otherwise try to spoof fake device ID with Clover instead of touching system files. Ok, I will try it, thank you Link to comment Share on other sites More sharing options...
MattsCreative Posted February 20, 2017 Share Posted February 20, 2017 hey could you remake that SSDT for me for my 290x please Link to comment Share on other sites More sharing options...
Ciro82 Posted February 20, 2017 Author Share Posted February 20, 2017 hey could you remake that SSDT for me for my 290x pleaseYou lost it? Inviato dal mio iPhone utilizzando Tapatalk Link to comment Share on other sites More sharing options...
MattsCreative Posted February 20, 2017 Share Posted February 20, 2017 You lost it? Inviato dal mio iPhone utilizzando Tapatalk it broke also jump in chat we need you Link to comment Share on other sites More sharing options...
Ciro82 Posted February 20, 2017 Author Share Posted February 20, 2017 it broke also jump in chat we need you Chat doesn't work, at least for me using the browser... Link to comment Share on other sites More sharing options...
MattsCreative Posted February 20, 2017 Share Posted February 20, 2017 Chat doesn't work, at least for me using the browser... use hexchat or something irc.insanelymac.com Link to comment Share on other sites More sharing options...
Ciro82 Posted February 21, 2017 Author Share Posted February 21, 2017 use hexchat or something irc.insanelymac.com It worked? Link to comment Share on other sites More sharing options...
Derondalf Posted February 21, 2017 Share Posted February 21, 2017 AMDRadeonX4100.kext. Do not forget to rebuild system extensions caches with Kext Utility. Otherwise try to spoof fake device ID with Clover instead of touching system files. Not working :/ Link to comment Share on other sites More sharing options...
Max.1974 Posted February 22, 2017 Share Posted February 22, 2017 Have you even read the thread?? Inviato dal mio iPhone utilizzando Tapatalk Yes my friend, sorry but im just ask for you if that card its possible to work like your card, just a simple question. Link to comment Share on other sites More sharing options...
Ur-Quan Posted February 22, 2017 Share Posted February 22, 2017 Not working :/ AMD FX-8300 has no iGPU, so you need a helper GPU be set as primary (read first post) Link to comment Share on other sites More sharing options...
VirusX Posted February 23, 2017 Share Posted February 23, 2017 Yes my friend, sorry but im just ask for you if that card its possible to work like your card, just a simple question. yes, that card will probably work with a "helper" card (iGPU of your prozessor), as described multiple times here in this thread 1 Link to comment Share on other sites More sharing options...
VirusX Posted February 26, 2017 Share Posted February 26, 2017 is there any update about HDMI audio? Link to comment Share on other sites More sharing options...
Mork vom Ork Posted February 27, 2017 Share Posted February 27, 2017 HOUSTON, we have a problem... just upgraded to SIERRA 10.12.4 beta4 (build 16E175b) and evan with IGPU as helper card i have no longer any monitor detected on my RX480: As you can see in the screen, the RX480 gets fully detected and recognized - but no screen was detected on boot. See this: All connectors detected correctly - but still no Screen. Also see here: First reboot after fresh update, System panics with Error in AMDSupport.kext. Had to rebuild kernelcache, than restart again... et voila, since this point no connected screens get detected (all of them report "no signal detected, going to sleep shortly"). Rebooted same constalation with SIERRA 10.12.4 beta3 <--- everything back to normal - all three screens where detected as all time back in the past. WEIRED, if you ask me. Continue to figure out, what the problem might be. Stay tuned... - - - - - PS: many 1 or 2 byte changes in AMDRadeonX4100.kext from beta3 to beta4 - with just one exception: At this part, you can see, that there were 1.6 kilobytes deleted w/o an exchange! Have to take a deeper look in details on what the deleted path was/did. 1 Link to comment Share on other sites More sharing options...
VirusX Posted February 28, 2017 Share Posted February 28, 2017 You write RX480 in your text but the screenshots show RX460. Does that problem affect both cards? Thanks for the warning in any case. I should hold off on installing 10.12.4 then :/ Link to comment Share on other sites More sharing options...
Mork vom Ork Posted February 28, 2017 Share Posted February 28, 2017 That was because i use ARBITRARY function and did the wrong naming match fpr my RX480. Thats because i have both cards for testing purposes, but use RX480 right now. As you can see, the ID is always correct for a RX480 1 Link to comment Share on other sites More sharing options...
Mr.Graphic Posted February 28, 2017 Share Posted February 28, 2017 @VirusX Rx 460 have no problem. 1 Link to comment Share on other sites More sharing options...
ekwipt Posted February 28, 2017 Share Posted February 28, 2017 I have metal support, no fans are moving on the card, so i'm a little worried it's going to overheat, please check if i have the config.plist correct? Also is there anyway to check if my cards fully supported or not? config.plist.zip I have a helper card in slot 2 (nvidia GT710), the RX480 in Slot 1 Link to comment Share on other sites More sharing options...
Mr.Graphic Posted February 28, 2017 Share Posted February 28, 2017 58-60 degrees turn on the fan. Check it out test. (Geekbench, Valley, LuxMark) Watch, and it will turn into. 1 Link to comment Share on other sites More sharing options...
Mork vom Ork Posted February 28, 2017 Share Posted February 28, 2017 I would have to revise my further statement: my connected monitors didnt show any signal, because i was using a kextpatch for AMDSupport.kext, which i have made for testing and forget to remove it. After removing that patch, all monitors now getting detected by SIERRA 10.12.4 beta4 (build16E175b). Sorry for any inconvenience. My fault 1 Link to comment Share on other sites More sharing options...
ekwipt Posted February 28, 2017 Share Posted February 28, 2017 Ok thanks for the fan. Heck will keep this in mind Link to comment Share on other sites More sharing options...
entrixo Posted March 5, 2017 Share Posted March 5, 2017 I run 10.12.4 Beta 4 with an RX460 and a Pentium G3258 on my machine. Unfortunately there are no drivers for the iGPU in the G3258 and macOS always sees a non-existing screen leaving me with a weird dual-monitor setup. I can disable the monitor using the DisableMonitor app but I have to do it on every boot. Is there a way to disable the iGPU in macOS through DSDT or some sort of a kext or anything else that's automatic? Link to comment Share on other sites More sharing options...
Max.1974 Posted March 10, 2017 Share Posted March 10, 2017 Hi everyone, could anyone please tell me how to test the GPU RX 480 8GB Sapphire NItro. I got this result in benckmark but I'm not an advanced user. What do you think? It's been good here, and I'm enjoying it. In WIndows I'm also running Doom 2016 and it's very cool !! 1 Link to comment Share on other sites More sharing options...
Recommended Posts