Micky1979 Posted June 18, 2016 Share Posted June 18, 2016 always facetious Don't know what you mean, but my google research has making me laugh (@lisai9093 was a quip) Link to comment Share on other sites More sharing options...
Fljagd Posted June 18, 2016 Share Posted June 18, 2016 Don't know what you mean, but my google research has making me laugh (@lisai9093 was a quip) joker<=>facetious 1 Link to comment Share on other sites More sharing options...
@ROBASEFR Posted June 18, 2016 Share Posted June 18, 2016 People here with NVMe SSD recognition problems have tried pikeralpha's suggestion ? "NVMe boot argument" People with a NVMe SSD may want to try this boot argument: nvme=0x3 Link to comment Share on other sites More sharing options...
asdesoso Posted June 18, 2016 Share Posted June 18, 2016 @asdesoso It's an Asus mobo? EDIT Sorry but apparently you have a patched dsdt: Name (_ADR, 0x00030000) // _ADR: Address Method (_DSM, 4, NotSerialized) // _DSM: Device-Specific Method { Store (Package (0x06) { "hda-gfx", Buffer (0x0A) { "onboard-1" }, "layout-id", Buffer (0x04) { 0x01, 0x00, 0x00, 0x00 }, "PinConfigurations", Buffer (0x04) { 0xE0, 0x00, 0x56, 0x28 } }, Local0) DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0)) Return (Local0) } Sorry can't help after you stating that you had no patched DSDT, don't want to waste my time, So each solutions would be useless. It is a Gigabyte, but not is more easier to send me the patched AppleHDA for 10.12 (ALC892) to test if it works? Thanks. Link to comment Share on other sites More sharing options...
Micky1979 Posted June 18, 2016 Share Posted June 18, 2016 Having layout-id 1 set in DSDT when our app produces kexts working only with 5, 7 or 9? Also, you already tried the app, so cannot be better if done by me, will simply be only the same if done by you using our app. 1 Link to comment Share on other sites More sharing options...
asdesoso Posted June 18, 2016 Share Posted June 18, 2016 Having layout-id 1 set in DSDT when our app produces kexts working only with 5, 7 or 9? Also, you already tried the app, so cannot be better if done by me, will be only the same if done by you. And how I can set layout 7 in DSDT? Thanks Link to comment Share on other sites More sharing options...
Micky1979 Posted June 18, 2016 Share Posted June 18, 2016 And how I can set layout 7 in DSDT? Thanks Using Maciasl! Your original has a bad errors that require a lot of time, the patched one also + have some bad paches applied. So sorry no time, really 1 Link to comment Share on other sites More sharing options...
asdesoso Posted June 18, 2016 Share Posted June 18, 2016 Using Maciasl! Your original has a bad errors that require a lot of time, the patched one also + have some bad paches applied. So sorry no time, really Thanks for your help. Have a nice day. 1 Link to comment Share on other sites More sharing options...
Micky1979 Posted June 18, 2016 Share Posted June 18, 2016 Someone with more time can help you. 1 Link to comment Share on other sites More sharing options...
Mork vom Ork Posted June 18, 2016 Share Posted June 18, 2016 People here with NVMe SSD recognition problems have tried pikeralpha's suggestion ? "NVMe boot argument" People with a NVMe SSD may want to try this boot argument: nvme=0x3 Yes tried it, but no difference. NVMe SSD may get recognized, but won't load on desktop. Link to comment Share on other sites More sharing options...
Ciro82 Posted June 18, 2016 Share Posted June 18, 2016 It is a Gigabyte, but not is more easier to send me the patched AppleHDA for 10.12 (ALC892) to test if it works? Thanks. Keep your layout id 1 in your DSDT and put AppleALC.kext in the Clover Kexts/Other folder. AppleALC.kext.zip Link to comment Share on other sites More sharing options...
asdesoso Posted June 18, 2016 Share Posted June 18, 2016 Keep your layout id 1 in your DSDT and put AppleALC.kext in the Clover Kexts/Other folder. Ok, thanks I will try it. Have a nice day. Link to comment Share on other sites More sharing options...
asdesoso Posted June 18, 2016 Share Posted June 18, 2016 Keep your layout id 1 in your DSDT and put AppleALC.kext in the Clover Kexts/Other folder. Still not working, I finally installed VoodooHDA in 10.12 but in el capa AppleHDA runs ok in 10.11.5 with realtek alc110 command script. Thanks for your help. Link to comment Share on other sites More sharing options...
mnfesq Posted June 18, 2016 Share Posted June 18, 2016 Any1 know what is the Airport brcm MFG is ? It only appears when booting recovery hd and not under normal boot I found that message at line 57 here: http://pastebin.com/xYwTtQT2 It appears in El Capitan and not exclusively when booting from recovery hd. Maybe not something new or needed for binary patch of BCM4360. Link to comment Share on other sites More sharing options...
lisai9093 Posted June 18, 2016 Share Posted June 18, 2016 I found that message at line 57 here: http://pastebin.com/xYwTtQT2 It appears in El Capitan and not exclusively when booting from recovery hd. Maybe not something new or needed for binary patch of BCM4360. True. But it may help me track where the problem is because there is fewer error messages in normal boot than recovery boot Link to comment Share on other sites More sharing options...
mnfesq Posted June 18, 2016 Share Posted June 18, 2016 True. But it may help me track where the problem is because there is fewer error messages in normal boot than recovery boot Let me know if there is anything I can do to help. Link to comment Share on other sites More sharing options...
nmano Posted June 19, 2016 Share Posted June 19, 2016 Good news for x99 10.12 AppleIntelCPUPowerManagement.kext loaded without fakecpuid I tested 5960X 1 Link to comment Share on other sites More sharing options...
AsusFreak Posted June 19, 2016 Share Posted June 19, 2016 @nmano- Interesting that it's not properly reporting Processor and GPU. 1 Link to comment Share on other sites More sharing options...
Mirone Posted June 19, 2016 Share Posted June 19, 2016 Good news for x99 10.12 AppleIntelCPUPowerManagement.kext loaded without fakecpuid I tested 5960X You also this without QE / CI? what is your graphics card? Link to comment Share on other sites More sharing options...
NOTNlCE Posted June 19, 2016 Share Posted June 19, 2016 Can you all share your config.plist for X99? I assume using NullCPUPM as XCPM isn't working correctly? How about VoodooTSync, or is that outdated now? Thanks! Link to comment Share on other sites More sharing options...
Matthew82 Posted June 19, 2016 Share Posted June 19, 2016 Did anyone managed to run Sierra on hardware with Radeon 290x ore or similar GPU? Link to comment Share on other sites More sharing options...
flip360 Posted June 19, 2016 Share Posted June 19, 2016 Hey everyone, made an USB installer with Pandora`s Box, installed Sierra clean, on first boot through the USB it gets right to the point where it should start the welcome screen and just hangs there. Had 10.11.5 before with GTX 560 1Gb and switched to the GTX 680 2Gb (sig in signature) so i was thinking if somebody can be of assistance? Smbios is set automatically through Clover to the iMac14,2, no DSDT, just FakeSMC and LAN kexts. Picture of boot verbose attached. Thanks! Link to comment Share on other sites More sharing options...
Mirone Posted June 19, 2016 Share Posted June 19, 2016 @flip360, try bootargs nv_disable=1 1 Link to comment Share on other sites More sharing options...
MattsCreative Posted June 19, 2016 Share Posted June 19, 2016 Did anyone managed to run Sierra on hardware with Radeon 290x ore or similar GPU? yes the 290x runs great no issues it needs a new patch for dual monitors 1 Link to comment Share on other sites More sharing options...
Riley Freeman Posted June 19, 2016 Share Posted June 19, 2016 @flip360 "Waiting for DSMOS"... in your output suggests FakeSMC isn't loading. Are you using Clover 3561 or higher? 1 Link to comment Share on other sites More sharing options...
Recommended Posts