chris1111 Posted May 15, 2016 Author Share Posted May 15, 2016 Finally got it to work finally. I did a fresh install again and then update to 10.11.4 and made repaired caches and permissions for about 3 times. Finally, repaired caches and permissions through kextwizard did the trick. Thus is finally a successful instalation. Thanks Chris for your installer for the 755 /760/780 Optiplex series. That's what I used since it was already confugured with the Mac Pro 3,1 smbios. Now I'm not sure if the G630 cpu I was using could've been the issue also that it wouldn't work without safe mode. I'm glad I made that discovery and that'll for sure save a lot of time from hair pulling and headaches. ++Kudos Chris. before trying the command you need this in config.plist and also after the reboot maibe thats the problème ? your change the original config.plist <key>CsrActiveConfig</key> <string>0x67</string> <key>BooterConfig</key> <string>0x28</string> Little bit strange kextwizzard / Maintenance not working inside El Capitan ? Anyway you successful and this is what matters ! @chris 1111 hi, you might someday do for Clover ThinkCentre M90 and M91, We will make very grateful. Greetings! https://support.lenovo.com/si/sl/documents/migr-74675 ThinkCentre M90 (type 3246, 3544, 5384, 5474, 6232), M90p (3282, 3652, 5450, 5498, 5852, 6590) I dont have the PC for make it all test Link to comment Share on other sites More sharing options...
chris1111 Posted May 15, 2016 Author Share Posted May 15, 2016 I have put one more SSD OS X Yosemite The same kext ALC 662 WORKS inside Yosemite 1 Link to comment Share on other sites More sharing options...
Blaggah Posted May 15, 2016 Share Posted May 15, 2016 I tried a bunch of stuff can't remember what order but kextwizard is what I believe did the trick for me when I repaired cache and permissions with it. I'm trying to install an SSD on my Lenovo Thinkcentre M91p as well but space seem to be limited on the SFF. Did you remove your DVD Drive? Link to comment Share on other sites More sharing options...
chris1111 Posted May 15, 2016 Author Share Posted May 15, 2016 I tried a bunch of stuff can't remember what order but kextwizard is what I believe did the trick for me when I repaired cache and permissions with it. I'm trying to install an SSD on my Lenovo Thinkcentre M91p as well but space seem to be limited on the SFF. Did you remove your DVD Drive? No my 3 SSD is under the blue case side by side I have 4 SATA connector Link to comment Share on other sites More sharing options...
Blaggah Posted May 15, 2016 Share Posted May 15, 2016 Oh OK, very clever my friend. How do you attach them underneath the blue case? You use velcro or zip ties? Link to comment Share on other sites More sharing options...
chris1111 Posted May 15, 2016 Author Share Posted May 15, 2016 Oh OK, very clever my friend. How do you attach them underneath the blue case? You use velcro or zip ties? I driller fourth pierces on the bottom , attach my first one and the two other side by side with a revert tape thats fit good and clean just need couple connector two power Y split cable and two sata power connector or ATX power-sata y power and one or two sata power spliter Not really mutch more power SSD An SSD uses very minimal power... 1 Link to comment Share on other sites More sharing options...
Blaggah Posted May 15, 2016 Share Posted May 15, 2016 Oh OK I see, but it seems like you have 2 stacked up on top of another. Am I mistaken? That's what it looks like in the first picture. I was under the impression that you were still using a 3.5" HDD in there too. So now it's clear to me that you're only using SSDs under that blue case. Link to comment Share on other sites More sharing options...
chris1111 Posted May 15, 2016 Author Share Posted May 15, 2016 Oh OK I see, but it seems like you have 2 stacked up on top of another. Am I mistaken? That's what it looks like in the first picture. I was under the impression that you were still using a 3.5" HDD in there too. So now it's clear to me that you're only using SSDs under that blue case. One OCZ 120 gig one Kingston 120 gig and one Kingston 240 gig Link to comment Share on other sites More sharing options...
chris1111 Posted May 16, 2016 Author Share Posted May 16, 2016 Update Installer V3 See Change Log Link to comment Share on other sites More sharing options...
Blaggah Posted May 16, 2016 Share Posted May 16, 2016 It still a bit unclear to me how you have 3 there but that's OK. Could you link me to the version of power sata splitter that you used for this? I think I have a few laying around just want to make sure that's all so I won't order again by mistake. Link to comment Share on other sites More sharing options...
Blaggah Posted May 16, 2016 Share Posted May 16, 2016 Hey Chris, just a thought but do you think you could implement the M81 into the installer for those who have that version of M series? Would it be hard to include smbios Macbook 3,1 for since anything else would require to be booted into safe mode? I'm not sure how all of this work but it's just a thought that just came to mind. As far as the safe mode boot on the M81 with Intel pentium G630, I will try again with V3 installer because I have another motherboard coming in the mail this week and see if there's a difference with the type of CPUs being used. I'll then try a 2400 cpu and see the difference. Link to comment Share on other sites More sharing options...
chris1111 Posted May 16, 2016 Author Share Posted May 16, 2016 It still a bit unclear to me how you have 3 there but that's OK. Could you link me to the version of power sata splitter that you used for this? I think I have a few laying around just want to make sure that's all so I won't order again by mistake. Is that clear now ? I dont have a link just type on google what peace you want Link to comment Share on other sites More sharing options...
Blaggah Posted May 16, 2016 Share Posted May 16, 2016 OK a bit clearer now. Thanks. I'm sure I'll figure it out. Thanks Link to comment Share on other sites More sharing options...
chris1111 Posted May 16, 2016 Author Share Posted May 16, 2016 Now I have just Update 10.11.5 Apple menue All fine just install Audio ALC 662 Link to comment Share on other sites More sharing options...
Blaggah Posted May 16, 2016 Share Posted May 16, 2016 10.11.5 is officially out now? Link to comment Share on other sites More sharing options...
chris1111 Posted May 16, 2016 Author Share Posted May 16, 2016 10.11.5 is officially out now? Yes Link to comment Share on other sites More sharing options...
Blaggah Posted May 16, 2016 Share Posted May 16, 2016 OK great. So in regards to the applehda.kext which is shown as native now, does this mean we'll never have to worry about it with later updates from Apple? Link to comment Share on other sites More sharing options...
chris1111 Posted May 16, 2016 Author Share Posted May 16, 2016 OK great. So in regards to the applehda.kext which is shown as native now, does this mean we'll never have to worry about it with later updates from Apple? This is the Final Major Update Link to comment Share on other sites More sharing options...
chris1111 Posted May 17, 2016 Author Share Posted May 17, 2016 Sorry its my mistake, the Original kext AppleHDA not working My mistake is I am booting with EFI contain VoodooHDA I have 3 SSD and my boot SSD contain Voodoo Now deleted VoodooHDA and reinstall the ALC 662 all fine on 10.11.5 Link to comment Share on other sites More sharing options...
Blaggah Posted May 17, 2016 Share Posted May 17, 2016 Lol, ok good to know. Just got home from work, im about to do the update now on my P690 now that it's official. 1 Link to comment Share on other sites More sharing options...
hserhk Posted May 17, 2016 Share Posted May 17, 2016 Update on my m93 I have 2 USB3 in the front, 4 USB3 and 2 USB2 at the back Only 2 USB3 at the back can be run at USB3 mode, if I plug any USB3 device on it, OSX will not recognise the device, but USB2 device can. HWMonitor can detect my SSD and HDD, but CPU cannot PS: Is it necessary to create a SSDT for my i7 4790? 1 Link to comment Share on other sites More sharing options...
chris1111 Posted May 17, 2016 Author Share Posted May 17, 2016 Update on my m93 I have 2 USB3 in the front, 4 USB3 and 2 USB2 at the back Only 2 USB3 at the back can be run at USB3 mode, if I plug any USB3 device on it, OSX will not recognise the device, but USB2 device can. HWMonitor can detect my SSD and HDD, but CPU cannot Have look here http://www.insanelymac.com/forum/topic/306777-guide-usb-fix-el-capitan-1011/ Link to comment Share on other sites More sharing options...
chris1111 Posted May 20, 2016 Author Share Posted May 20, 2016 See change Log new V3 Installer I remove previous V3 Ad my script Inject-ATI 5450 inside Postinstaller -V3 Testing by me and SUCCESS OS X El Capitan 10.11.5 After Reboot There is the two kext modified with the proper Device ID for the ATI Radeon HD 5450 Link to comment Share on other sites More sharing options...
chris1111 Posted May 20, 2016 Author Share Posted May 20, 2016 As you know my Lenovo ThinkCentre integrate PCIe USB 3.0 2 port back and connector 19 pin to put a front panel, this is done successful and I am very proud Just little tuch up finition and thats it The difference Native support 1 Link to comment Share on other sites More sharing options...
Blaggah Posted May 21, 2016 Share Posted May 21, 2016 You stay inspiring me Chris lol. Good mod. I'm feeling very eyes lazy this weekend. Don't feel like doing anything. Link to comment Share on other sites More sharing options...
Recommended Posts