Iron Spider Posted March 9, 2016 Share Posted March 9, 2016 (edited) I've tried many different installers for this, used every type of bootflags I could find to no avail. My specs: Motherboard: Asrock 960GM/U3S3 FX CPU: AMD FX 6300 GPU : Radeon HD 7870 Is there any specific tutorial for this setup ? I have tried so many, myhack , pandora's box , **** and *****. I'm still trying to use myhack installer with replaced kexts and kernel but every time I go and put in bootflags it runs for a bit and then reboots. I cannot get past the installer. Please help Edited March 9, 2016 by spakk Link to comment Share on other sites More sharing options...
spakk Posted March 9, 2016 Share Posted March 9, 2016 look here: http://www.insanelymac.com/forum/topic/285110-amd-working-builds/ ...and here: http://www.insanelymac.com/forum/forum/494-general-discussion/ ......and here: http://www.insanelymac.com/forum/forum/318-amd-development/ .........and here: http://www.insanelymac.com/forum/files/file/526-amd-el-capitan-dmg/ Link to comment Share on other sites More sharing options...
Iron Spider Posted March 10, 2016 Author Share Posted March 10, 2016 look here: http://www.insanelymac.com/forum/topic/285110-amd-working-builds/ ...and here: http://www.insanelymac.com/forum/forum/494-general-discussion/ ......and here: http://www.insanelymac.com/forum/forum/318-amd-development/ .........and here: http://www.insanelymac.com/forum/files/file/526-amd-el-capitan-dmg/ I have already looked in those places, I just need help in the BIOS for my as rock motherboard because I can't boot the installer it just shows a black screen and this is with **** and I've tried to purchased copies of Mavericks too. I can't change my BIOS settings to HPET and I have yet to find a good tutorial for my configuration. Link to comment Share on other sites More sharing options...
spakk Posted March 10, 2016 Share Posted March 10, 2016 set the CPU settings to default. AMD C1E [Disabled] SATA AHCI ==> [Enabled] boot sequence: 1. USB Flash Disk (OS X Installer) 2. HDD (for OS X) Use Enoch ver. 2795 install the appropriate amd kernel for AMD FX CPUs Delete in S/L/Extensions/ AppleIntelCPUPowerManagement.kext and AppelTMC.... Install into Extra/Extensions/ NullpowerManagement.kext and FakeSMC.kext and VoodooPS2Controller.kext ...... and a few other suitable drivers for your hardware .... please read by users with similar hardware and add the appropriate drivers. Use smbios.plist for MacPro3,1 Then boot with: -v -f npci=0x2000 usekernelcache=no Link to comment Share on other sites More sharing options...
Iron Spider Posted March 10, 2016 Author Share Posted March 10, 2016 set the CPU settings to default. AMD C1E [Disabled] SATA AHCI ==> [Enabled] boot sequence: 1. USB Flash Disk (OS X Installer) 2. HDD (for OS X) Use Enoch ver. 2795 install the appropriate amd kernel for AMD FX CPUs Delete in S/L/Extensions/ AppleIntelCPUPowerManagement.kext and AppelTMC.... Install into Extra/Extensions/ NullpowerManagement.kext and FakeSMC.kext and VoodooPS2Controller.kext ...... and a few other suitable drivers for your hardware .... please read by users with similar hardware and add the appropriate drivers. Use smbios.plist for MacPro3,1 Then boot with: -v -f npci=0x2000 usekernelcache=no I've got the mavericks download from the app store. what program will I use on my mac to make the usb installer? Many thanks Link to comment Share on other sites More sharing options...
Iron Spider Posted March 10, 2016 Author Share Posted March 10, 2016 set the CPU settings to default. AMD C1E [Disabled] SATA AHCI ==> [Enabled] boot sequence: 1. USB Flash Disk (OS X Installer) 2. HDD (for OS X) Use Enoch ver. 2795 install the appropriate amd kernel for AMD FX CPUs Delete in S/L/Extensions/ AppleIntelCPUPowerManagement.kext and AppelTMC.... Install into Extra/Extensions/ NullpowerManagement.kext and FakeSMC.kext and VoodooPS2Controller.kext ...... and a few other suitable drivers for your hardware .... please read by users with similar hardware and add the appropriate drivers. Use smbios.plist for MacPro3,1 Then boot with: -v -f npci=0x2000 usekernelcache=no I've looked all day for methods , I've tried to use Pandora's box with Yosemite 10.10 with Bronya's patch kernel . I replaced some kexts and now I tried those bootflags and it just keeps rebooting my computer. Because your steps are not clear to me because you did not say what installer to use because I used Pandora's Box and I do not have the Extra/Extensions folder. Link to comment Share on other sites More sharing options...
Micky1979 Posted March 12, 2016 Share Posted March 12, 2016 Simply, your Extra/Extensions folder is created only if you install some kexts to it, otherwise no. Have you read what is written above? Or you forgot to install the FakeSMC.kext too? Link to comment Share on other sites More sharing options...
gils83 Posted April 6, 2016 Share Posted April 6, 2016 Extra.zip Link to comment Share on other sites More sharing options...
Recommended Posts