Matgen84 Posted July 20, 2019 Share Posted July 20, 2019 (edited) 46 minutes ago, Andres ZeroCross said: I don't use IOJones,, can you upload from Ioregexplorer.app?? Now IOREG File in attachment. Aorus_Master.ioreg Edited July 20, 2019 by Matgen84 Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted July 20, 2019 Share Posted July 20, 2019 32 minutes ago, Matgen84 said: Now IOREG File in attachment. in Terminal, kextstat don't found AppleALC at all. For AppleHDA, there is only AppleGFXHDA Aorus_Master.ioreg Ioreg doesn't show your Codec,, just curious. Can you open DPCIManager.app dan take screenshot? Link to comment Share on other sites More sharing options...
Matgen84 Posted July 20, 2019 Share Posted July 20, 2019 4 minutes ago, Andres ZeroCross said: Ioreg doesn't show your Codec,, just curious. Can you open DPCIManager.app dan take screenshot? DPCIManager v2.0 screenshot: no codec id? Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted July 20, 2019 Share Posted July 20, 2019 1 minute ago, Matgen84 said: DPCIManager v2.0 screenshot: no codec id? @Matgen84 it's look AppleALC.kext fail to prevent AppleGFXHda be loaded. Maybe you can make experiment, how about move AppleGFXHDA.kext to desktop first, Rebuild kext cache and reboot 1 Link to comment Share on other sites More sharing options...
Andrey1970 Posted July 20, 2019 Share Posted July 20, 2019 11 minutes ago, Andres ZeroCross said: @Matgen84 it's look AppleALC.kext fail to prevent AppleGFXHda be loaded. Maybe you can make experiment, how about move AppleGFXHDA.kext to desktop first, Rebuild kext cache and reboot It fixed long ago. 1 Link to comment Share on other sites More sharing options...
Matgen84 Posted July 20, 2019 Share Posted July 20, 2019 (edited) 15 minutes ago, Andres ZeroCross said: @Matgen84 it's look AppleALC.kext fail to prevent AppleGFXHda be loaded. Maybe you can make experiment, how about move AppleGFXHDA.kext to desktop first, Rebuild kext cache and reboot @Andres ZeroCross Very strange, I can't find AppleGFXHda and AppleHDA in S/L/E (latest DP Beta Catalina) Edited July 20, 2019 by Matgen84 Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted July 20, 2019 Share Posted July 20, 2019 3 minutes ago, Matgen84 said: @Andres ZeroCross Very strange, I can't find AppleGFXHda and AppleHDA in S/L/E (latest DP Beta Catalina) It should be there,, i used latest DP Catalina too. 1 Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted July 20, 2019 Share Posted July 20, 2019 8 minutes ago, Matgen84 said: @Andres ZeroCross Very strange, I can't find AppleGFXHda and AppleHDA in S/L/E (latest DP Beta Catalina) Lilu.kext is not loaded Of course all plugin won't run / loaded too Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted July 20, 2019 Share Posted July 20, 2019 15 minutes ago, Matgen84 said: @Andres ZeroCross Very strange, I can't find AppleGFXHda and AppleHDA in S/L/E (latest DP Beta Catalina) I have used these kext in my Catalina latest beta. Please try it WhateverGreen.kext.zip Lilu.kext.zip AppleALC.kext.zip 1 Link to comment Share on other sites More sharing options...
Matgen84 Posted July 20, 2019 Share Posted July 20, 2019 6 minutes ago, Andres ZeroCross said: Lilu.kext is not loaded Of course all plugin won't run / loaded too A solution? Please. Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted July 20, 2019 Share Posted July 20, 2019 Just now, Matgen84 said: A solution? Please. I have upload 3 kexts above, please try it 1 Link to comment Share on other sites More sharing options...
Matgen84 Posted July 20, 2019 Share Posted July 20, 2019 9 minutes ago, Andres ZeroCross said: I have upload 3 kexts above, please try it God Bless Lilu and @Andres ZeroCross Codec ALC1220-VB/ Layout-id=29 You build these kext on Mojave/Xcode 10.2.1? Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted July 20, 2019 Share Posted July 20, 2019 1 minute ago, Matgen84 said: God Bless Lilu and @Andres ZeroCross Codec ALC1220-VB/ Layout-id=29 You build these kext on Mojave/Xcode 10.2.1? Yes, i have reCompiled all kexts (XCode 10.2.1) if i got notif about new commit in Acidanthera kexts 1 Link to comment Share on other sites More sharing options...
Matgen84 Posted July 20, 2019 Share Posted July 20, 2019 1 minute ago, Andres ZeroCross said: Yes, i have reCompiled all kexts (XCode 10.2.1) if i got notif about new commit in Acidanthera kexts I believe that I have compile these same kext on Catalina (Xcode 11 Beta). I'm not sure . Big mistake 1 Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted July 20, 2019 Share Posted July 20, 2019 (edited) 2 hours ago, Matgen84 said: I believe that I have compile these same kext on Catalina (Xcode 11 Beta). I'm not sure . Big mistake I try to recompile new commit of Lilu.kext,, Lilu.kext fail to load. All plugin is not loading too. WhateverGreen, AppleALC.kext and VirtualSMC.kext is compiled with latest commit too. I replace just lilu.kext with my old version (attached above) and all kext is loaded normally. Solved in latest commit https://github.com/acidanthera/Lilu/commit/05ceed582eea1db889e67f5d5373f64787c09a81 Edited July 20, 2019 by Andres ZeroCross Solved Link to comment Share on other sites More sharing options...
interorient Posted July 21, 2019 Share Posted July 21, 2019 Hi Andres ZeroCross, I installed your kext (Posted 19 June ) all are OK ,but today I tried to use BT ,the BT PAIR by phone ,connect with my Phone for few seconds (about 6 seconds ) and after the BT is disconnected. The sound can interfere the BT connection? I replaced the Wi-Fi card ,but the problem is the same. Link to comment Share on other sites More sharing options...
ben130 Posted July 22, 2019 Share Posted July 22, 2019 On 7/19/2019 at 2:46 AM, Andres ZeroCross said: Your codec is not detected in IOREG,, nothing to do with appleALC. Try to fix your IRQ Flag. Open your config.plist with CLover Configuratior. Then tick HPET, IRQ, TIMR, IPIC in ACPI section. Set layout ID as 21 / 22. Reboot and check your audio, don't forget to upload IOREG again You are talking about dsdt patches correct? In clover I could only find fixhpet fixipic and fixtmr which is different from timr and couldnt find fixirq. I can attach my config.plist if that will help? Or where are these located? I searched both the 1 and 2 of patches Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted July 22, 2019 Share Posted July 22, 2019 17 hours ago, interorient said: Hi Andres ZeroCross, I installed your kext (Posted 19 June ) all are OK ,but today I tried to use BT ,the BT PAIR by phone ,connect with my Phone for few seconds (about 6 seconds ) and after the BT is disconnected. The sound can interfere the BT connection? I replaced the Wi-Fi card ,but the problem is the same. AFAIK, Audio and Bluetooth is different thing. Bluetooth use XHC / EHC1/2 Port (USB Power Management) Audio is HDEF, HDAS or AZAL device with different address from Bluetooth. I don't have information about "AppleHDA.kext can interfere Bluetooth". It's different device and kext Link to comment Share on other sites More sharing options...
mat100 Posted July 28, 2019 Share Posted July 28, 2019 (edited) Hi, I would like to use AppleALC on my HP ZBOOK 15u g6. Unfortunately, my codec Realtek ALC215 is not currently supported. Is it possible to add support for this codec ? attached dump from linux Thank you very much in advance for your reply codec_dump.txt codec_dump2.txt Edited July 29, 2019 by mat100 Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted July 30, 2019 Share Posted July 30, 2019 On 7/29/2019 at 4:31 AM, mat100 said: Hi, I would like to use AppleALC on my HP ZBOOK 15u g6. Unfortunately, my codec Realtek ALC215 is not currently supported. Is it possible to add support for this codec ? attached dump from linux Thank you very much in advance for your reply codec_dump.txt codec_dump2.txt IF you can fast response then i will try to make new resource Link to comment Share on other sites More sharing options...
shreyans4020 Posted July 30, 2019 Share Posted July 30, 2019 Hi all I am having a vary strange problem after update to 10.14.6. On ALC255 I am stuck on either headphone jack or speaker for output (for different layout) but as soon as I am removing headphone it is not going back to speaker. Please tell me which file is needed as I am new to this forum. Link to comment Share on other sites More sharing options...
mat100 Posted July 30, 2019 Share Posted July 30, 2019 4 hours ago, Andres ZeroCross said: IF you can fast response then i will try to make new resource Hi, Thank you very much for your response, I can test every day after work. If that's enough, I'll be very happy Matej Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted July 30, 2019 Share Posted July 30, 2019 3 hours ago, mat100 said: Hi, Thank you very much for your response, I can test every day after work. If that's enough, I'll be very happy Matej Use latest Lilu.kext and use this AppleALC.kext with LayoutID = 21. After that reboot and check for the result. Don't forget to upload IOREG Output (Use IORegistryExplorer.app v2.1) AppleALC.kext.zip Link to comment Share on other sites More sharing options...
mat100 Posted July 30, 2019 Share Posted July 30, 2019 (edited) 4 hours ago, Andres ZeroCross said: Use latest Lilu.kext and use this AppleALC.kext with LayoutID = 21. After that reboot and check for the result. Don't forget to upload IOREG Output (Use IORegistryExplorer.app v2.1) AppleALC.kext.zip thank you very much for your help, but unfortunately it doesn't work, I still can't see the audio device. in the attachment IOREG can you please advise what i am doing wrong ? ioreg.ioreg PS: the internal speaker works after the second reboot, but the microphone still does not work Edited July 30, 2019 by mat100 Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted July 31, 2019 Share Posted July 31, 2019 (edited) 8 hours ago, mat100 said: thank you very much for your help, but unfortunately it doesn't work, I still can't see the audio device. in the attachment IOREG can you please advise what i am doing wrong ? ioreg.ioreg PS: the internal speaker works after the second reboot, but the microphone still does not work Upload IOREG Output when it's working. There is no Fixed Internal Mic in your Node ID of Codec_dump.txt, i only see Headphone, Internal Speaker, External Jack Microphone, Modem Line-In, and other Speaker in, Tracking your internal mic gonna be more works and times. Don't forget to upload your IOREG output. You need to inform about 1. Internal Speaker 2. Headphone jack 3. External Mic Deal with internal mic later Edited July 31, 2019 by Andres ZeroCross Link to comment Share on other sites More sharing options...
Recommended Posts