notmacowner Posted June 22, 2019 Share Posted June 22, 2019 13 minutes ago, Andres ZeroCross said: https://github.com/acidanthera/AppleALC/tree/master/Resources/ALC269 Read available Layout for ALC269,, try one by one Will do. Trying ALL ALC269 layouts including ALC269VC. BTW, is it ok if I keep the AppleALC.kext in clover/kext/other for now? does the FakePCIID kexts affect it? Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted June 22, 2019 Share Posted June 22, 2019 3 minutes ago, notmacowner said: Will do. Trying ALL ALC269 layouts including ALC269VC. BTW, is it ok if I keep the AppleALC.kext in clover/kext/other for now? does the FakePCIID kexts affect it? FakePCIID.kext still need another kext to work, and Ivy Bridge doesn't need FakePCIID.kext + FakePCIID_IntelHDMI.kext. Btw,, it will not affect to your system too. Link to comment Share on other sites More sharing options...
arcanandrei Posted June 22, 2019 Share Posted June 22, 2019 14 minutes ago, Andres ZeroCross said: I don't have any idea,, install CodecCommander.kext to Library/Extensions, rebuild kext cache. REMEMBER : you must put Codec COmmander to Library/Extensions no System/Libaray/Extensions. After that shutdown your pc, then Turn on again, and check your audio. Btw, what's your motherboard name and model?? B360 is a chipset. There are THOUSAND B360 out there I don't know the motherboard name, the entire PC is made by Lenovo and it's name is Lenovo C530 The motherboard uses the B360 chipset but I think it's a proprietary motherboard made by Lenovo I tried installing CodecCommander.kext in /L/E and restarted Now the sound from the front panel does not come distorted at all, is very clear and nice But the rear panel still has no bass Do you have any other ideas that are worth trying? Also, here is my config.plist and kexts folder, maybe I did something wrong there Thank you EFI.zip Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted June 22, 2019 Share Posted June 22, 2019 Just now, arcanandrei said: I don't know the motherboard name, the entire PC is made by Lenovo and it's name is Lenovo C530 The motherboard uses the B360 chipset but I think it's a proprietary motherboard made by Lenovo I tried installing CodecCommander.kext in /L/E and restarted Now the sound from the front panel does not come distorted at all, is very clear and nice But the rear panel still has no bass Do you have any other ideas that are worth trying? Also, here is my config.plist and kexts folder, maybe I did something wrong there Thank you EFI.zip Use this,, reboot and post the result AppleALC.kext.zip Link to comment Share on other sites More sharing options...
arcanandrei Posted June 22, 2019 Share Posted June 22, 2019 3 minutes ago, Andres ZeroCross said: Use this,, reboot and post the result AppleALC.kext.zip YES, YES, YES Everything works now, I have bass in the rear jack But could you please make the rear jack boost lower? At 25% volume my headphones are blowing up THANK YOU SO MUCH, 1000 x THANK YOU You made me so happy Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted June 22, 2019 Share Posted June 22, 2019 YES, YES, YES Everything works now, I have bass in the rear jack But could you please make the rear jack boost lower? At 25% volume my headphones are blowing up THANK YOU SO MUCH, 1000 x THANK YOU You made me so happyYou can decrease audio volume from system preferences -> Audio -> OutputSent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
arcanandrei Posted June 22, 2019 Share Posted June 22, 2019 1 minute ago, Andres ZeroCross said: You can decrease audio volume from system preferences -> Audio -> Output Sent from my iPhone using Tapatalk Yes, I know but when I'm using the front panel and set the volume to maximum and then I switch to rear port, the speakers will blow up, because on the rear port at about 25% volume it's like 100% volume on the front panel Thank you again Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted June 22, 2019 Share Posted June 22, 2019 Yes, I know but when I'm using the front panel and set the volume to maximum and then I switch to rear port, the speakers will blow up, because on the rear port at about 25% volume it's like 100% volume on the front panel Thank you againFront Panel = HeadphoneRearPanel = Internal SpeakerBoth of it use separate volume, just check volume bar again after you put headphone to rear jackSent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
arcanandrei Posted June 22, 2019 Share Posted June 22, 2019 Just now, Andres ZeroCross said: Front Panel = Headphone RearPanel = Internal Speaker Both of it use separate volume, just check volume bar again after you put headphone to rear jack Sent from my iPhone using Tapatalk Yes, you are right The only thing for me to do now is make sure I don't raise the volume by accident Again, thank you very much, you're awesome Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted June 22, 2019 Share Posted June 22, 2019 6 minutes ago, arcanandrei said: Yes, you are right The only thing for me to do now is make sure I don't raise the volume by accident Again, thank you very much, you're awesome Ok, i will add resources files to AppleALC github then. I hope @vandroiy2012 can accept pull request. I have one pending pull request before 1 Link to comment Share on other sites More sharing options...
notmacowner Posted June 22, 2019 Share Posted June 22, 2019 34 minutes ago, Andres ZeroCross said: FakePCIID.kext still need another kext to work, and Ivy Bridge doesn't need FakePCIID.kext + FakePCIID_IntelHDMI.kext. Btw,, it will not affect to your system too. ok deleting them from L/E. still trying all ids im at 6 now.. Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted June 22, 2019 Share Posted June 22, 2019 https://github.com/acidanthera/AppleALC/pull/425 please check @vandroiy2012 1 Link to comment Share on other sites More sharing options...
notmacowner Posted June 22, 2019 Share Posted June 22, 2019 3 hours ago, Andres ZeroCross said: https://github.com/acidanthera/AppleALC/tree/master/Resources/ALC269 Read available Layout for ALC269,, try one by one Hi, I tried them all ONE by ONE. 1 to 166. Nothing worked.. Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted June 23, 2019 Share Posted June 23, 2019 9 hours ago, notmacowner said: Hi, I tried them all ONE by ONE. 1 to 166. Nothing worked.. It mean you have made wrong patch to layoutID. Follow this,, use layout id 3, 7, and 13 after that upload your IOREG Output for each layouid used. Link to comment Share on other sites More sharing options...
notmacowner Posted June 23, 2019 Share Posted June 23, 2019 1 hour ago, Andres ZeroCross said: It mean you have made wrong patch to layoutID. Follow this,, use layout id 3, 7, and 13 after that upload your IOREG Output for each layouid used. will do Link to comment Share on other sites More sharing options...
notmacowner Posted June 23, 2019 Share Posted June 23, 2019 1 hour ago, Andres ZeroCross said: It mean you have made wrong patch to layoutID. Follow this,, use layout id 3, 7, and 13 after that upload your IOREG Output for each layouid used. here are the ioregs.. for each id i injected, i rebooted then save copy as.. layoutid3.ioreg idlayout7.ioreg 1 hour ago, Andres ZeroCross said: It mean you have made wrong patch to layoutID. Follow this,, use layout id 3, 7, and 13 after that upload your IOREG Output for each layouid used. can't upload the 13.ioreg file limit reached... Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted June 23, 2019 Share Posted June 23, 2019 15 minutes ago, notmacowner said: here are the ioregs.. for each id i injected, i rebooted then save copy as.. layoutid3.ioreg idlayout7.ioreg can't upload the 13.ioreg file limit reached... Open DPCIManager.app dan take screenshot Link to comment Share on other sites More sharing options...
MacPeet Posted June 23, 2019 Share Posted June 23, 2019 @notmacowner The Inject method is ok. alc-layout-id and layout-id are set in the ioreg some codecs should go at least partially Is your AppleHDA in S/L/E still original ??? see in system information / extensions: Is AppleHDA loaded and original ? Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted June 23, 2019 Share Posted June 23, 2019 1 minute ago, MacPeet said: @notmacowner The Inject method is ok. alc-layout-id and layout-id are set in the ioreg some codecs should go at least partially Is your AppleHDA in S/L/E still original ??? see in system information / extensions: Is AppleHDA loaded and original ? No dude,, he needs IRQ patch,, he didn't apply IRQ patch in his DSDT. Just check Fix HPET, FixRTC, TMR and IPIC in config.plist of Clover 2 Link to comment Share on other sites More sharing options...
notmacowner Posted June 23, 2019 Share Posted June 23, 2019 here's layoutid13.ioreg and screenshot of pci tab... i used the dpcimanager from https://github.com/MuntashirAkon/DPCIManager idlayout13.ioreg Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted June 23, 2019 Share Posted June 23, 2019 1 minute ago, notmacowner said: here's layoutid13.ioreg and screenshot of pci tab... i used the dpcimanager from https://github.com/MuntashirAkon/DPCIManager idlayout13.ioreg Wrong screenshot, you must take screensho in Status, i don't need your pci list, i can see pci list from IOREG. Btw, your problem is caused by wrong IRQ. Patch manual IRQ to your DSDT or OTF patch with clover. I have write the step about IRQ patch in config.plis above. Check it 2 Link to comment Share on other sites More sharing options...
notmacowner Posted June 23, 2019 Share Posted June 23, 2019 @MacPeet my AppleHDA in S/L/E is untouched as this is a clean install and tried this guide first as linked by toleda from the 'other' forum. 22 minutes ago, Andres ZeroCross said: Just check Fix HPET, FixRTC, TMR and IPIC in config.plist of Clover This one ^ I didn't see in other guides I came across with. Now working with layoutID=6. Testing jacks and other peripherals will give feedback shortly. THANK YOU so much @Andres ZeroCross! 1 Link to comment Share on other sites More sharing options...
notmacowner Posted June 23, 2019 Share Posted June 23, 2019 Ok I have tried the jacks and HDMI. Are the sound and video quality optimized depending on the layoutID? Because I tried the others: 6: speakers working, mic working, headphone & mic jack working, HDMI working 7: speakers not working (or atleast after I pulled my headphone/mic from the jack), headphone/mic jack working, didn't try HDMI 8: worked best for me, all working, sound quality (headphone) is more 'refined' in my opinion 13: not working didn't try the others.. Thank you again @Andres ZeroCross for the guidance. Link to comment Share on other sites More sharing options...
MacPeet Posted June 24, 2019 Share Posted June 24, 2019 hello @vandroiy2012 I have a new codec. ALC663 - LayoutID 15 (0F) for Fujitsu Celsius r670 Resources_alc663.zip can you please added the new codec? many thanks 1 1 Link to comment Share on other sites More sharing options...
ocelot11 Posted June 25, 2019 Share Posted June 25, 2019 (edited) On 6/20/2019 at 6:46 PM, ocelot11 said: Hi, I'm hoping someone here knows how to help me. I have a Lenovo thinkcentre M92P small form factor that I can't get the audio devices to show up on. It uses the 662 chipset and I've tired appleALC and lilu in all of the layouts listed for the 662 codec, but nothing seems to be working. To add some more information, it has three jacks in the back and two in the front. The motherboard uses the Intel Q77 chipset. I've tried layouts 5, 7, 11, 12, and 13 as listed on the wiki, plus layouts 15, 16, and 17 (as I saw .xml files for them on the wiki), but nothing has worked so far. The audio section only lists my appleTV. I have appleALC installed in the /kexts/other folder in clover. Hoping someone has a fix for me. Edited June 25, 2019 by ocelot11 Link to comment Share on other sites More sharing options...
Recommended Posts