Rocky12 Posted June 19, 2019 Share Posted June 19, 2019 hi Guys , just requesting if someone can add my flies to AppleALC currently i am using a patched AppleHDA.kext on Mojave which works very will but on the other side it can not work on Catalina and that,s why i need Audio solution i now that AppleALC has already support for ALC663 but the chip which i have is a Desktop version completely different form Laptop version i am really grateful for your support any help would be greatly appreciated layout1.xml Platforms.xml on Mojave working Audio ALC663 Desktop fujitsu celsius r670.zip Link to comment Share on other sites More sharing options...
interorient Posted June 19, 2019 Share Posted June 19, 2019 My IOREg output. interorient IOREG.zip Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted June 19, 2019 Share Posted June 19, 2019 (edited) 1 hour ago, interorient said: My IOREg output. interorient IOREG.zip Use this,, use layout id = 22 Post the result,, your internal speaker, Internal mic, and Headphone should work AppleALC.kext.zip Edited June 19, 2019 by Andres ZeroCross Link to comment Share on other sites More sharing options...
KQLY Posted June 20, 2019 Share Posted June 20, 2019 On 6/12/2019 at 11:21 AM, KQLY said: Hi I have a laptop with ALC255 (combo jack). I have tried various layouts but the headphones work only in 3,27. In those layouts, there is static in headphones (sometimes at random but especially after waking from sleep). I tried to use CodecCommander to solve these issues, but the laptop shuts down ( or kernel panics , I don't know since I don't see crash dumps) after waking from sleep or in the middle of macOS booting when the headphones are connected. Do I need a custom layout or am I doing something wrong ? Specifications Acer Aspire A315-51 (i3-6006u) CodecDump.zip Any guidance or help where I can solutions to this problem ? Link to comment Share on other sites More sharing options...
laelsirus Posted June 20, 2019 Share Posted June 20, 2019 On 6/15/2019 at 11:52 PM, taoarch said: Hello, buddy, I have a same tablet like you, but I can't drive UHD620 and touchpad. Can U send your EFI file to me for testing? Thank you! The mega link I attached already contains EFI UHD620 enabled using '59260002' platform id and using 'dpcd-max-link-rate' patch. And the touchpad recognized the mouse and recognized the touchscreen as a trackpad. Link to comment Share on other sites More sharing options...
interorient Posted June 20, 2019 Share Posted June 20, 2019 The Internal speakers is OK ,but on the output I have only Internal speakers and on the Input -Internal Microphone OK. The Internal speakers is OK ,but on the output I have only Internal speakers and on the Input -Internal Microphone OK. Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted June 20, 2019 Share Posted June 20, 2019 (edited) 21 minutes ago, interorient said: The Internal speakers is OK ,but on the output I have only Internal speakers and on the Input -Internal Microphone OK. The Internal speakers is OK ,but on the output I have only Internal speakers and on the Input -Internal Microphone OK. Just plug in your headphone,, it's automatic change. Like real apple device ways. Tips : Keep Balance in middle to get good sound for stereo speaker Edited June 20, 2019 by Andres ZeroCross Link to comment Share on other sites More sharing options...
ocelot11 Posted June 20, 2019 Share Posted June 20, 2019 Hi, I'm hoping someone here knows how to help me. I have a Lenovo thinkcentre M92P small form factor that I can't get the audio devices to show up on. It uses the 662 chipset and I've tired appleALC and lilu in all of the layouts listed for the 662 codec, but nothing seems to be working. Link to comment Share on other sites More sharing options...
arcanandrei Posted June 22, 2019 Share Posted June 22, 2019 Hello, I need help as I don't know how to patch AppleALC for my ALC233(235). Does someone have the time to patch AppleALC for me? I would appreciate this so much. There are 2 strange things: 1.In my codec-dump is shown Codec: Realtek ALC233 Vendor Id: 0x10ec0235 2.I have a Desktop PC (B360 mobo) and it seems like I'm using a notebook audio board I have 3 jacks in total: 1 rear (out), 2 front (mic + out) Layout-ids for ALC233 doesn't work Layout-ids for ALC235 work but only the front panel is working. When I take the jack out, the audio switches to the internal speakers, which I don't have. I attached codec-dump from Linux Thank you very much for your help codec-dump.txt Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted June 22, 2019 Share Posted June 22, 2019 Hello, I need help as I don't know how to patch AppleALC for my ALC233(235). Does someone have the time to patch AppleALC for me? I would appreciate this so much. There are 2 strange things: 1.In my codec-dump is shown Codec: Realtek ALC233 Vendor Id: 0x10ec0235 2.I have a Desktop PC (B360 mobo) and it seems like I'm using a notebook audio board I have 3 jacks in total: 1 rear (out), 2 front (mic + out) Layout-ids for ALC233 doesn't work Layout-ids for ALC235 work but only the front panel is working. When I take the jack out, the audio switches to the internal speakers, which I don't have. I attached codec-dump from Linux Thank you very much for your helpcodec-dump.txtHow many layout id that you have tried??Sent from my iPhone using Tapatalk Hello, I need help as I don't know how to patch AppleALC for my ALC233(235). Does someone have the time to patch AppleALC for me? I would appreciate this so much. There are 2 strange things: 1.In my codec-dump is shown Codec: Realtek ALC233 Vendor Id: 0x10ec0235 2.I have a Desktop PC (B360 mobo) and it seems like I'm using a notebook audio board I have 3 jacks in total: 1 rear (out), 2 front (mic + out) Layout-ids for ALC233 doesn't work Layout-ids for ALC235 work but only the front panel is working. When I take the jack out, the audio switches to the internal speakers, which I don't have. I attached codec-dump from Linux Thank you very much for your helpcodec-dump.txtHow many layout id that you have tried??Sent from my iPhone using Tapatalk Hello, I need help as I don't know how to patch AppleALC for my ALC233(235). Does someone have the time to patch AppleALC for me? I would appreciate this so much. There are 2 strange things: 1.In my codec-dump is shown Codec: Realtek ALC233 Vendor Id: 0x10ec0235 2.I have a Desktop PC (B360 mobo) and it seems like I'm using a notebook audio board I have 3 jacks in total: 1 rear (out), 2 front (mic + out) Layout-ids for ALC233 doesn't work Layout-ids for ALC235 work but only the front panel is working. When I take the jack out, the audio switches to the internal speakers, which I don't have. I attached codec-dump from Linux Thank you very much for your helpcodec-dump.txtHow many layout id that you have tried??Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
arcanandrei Posted June 22, 2019 Share Posted June 22, 2019 13 minutes ago, Andres ZeroCross said: How many layout id that you have tried?? Here are the layouts tested I didn't tested microphone front port at all because I don't have a microphone 3 - only front headphone port working (very bad quality) 11 - only front headphone port working 14 - only front headphone port working + shows additional line in input 15 - only front headphone port working + shows additional line in input 16 - only front headphone port working + shows additional line in input 28 - only front headphone port working + shows additional line in input Thank you very much Link to comment Share on other sites More sharing options...
notmacowner Posted June 22, 2019 Share Posted June 22, 2019 (edited) Hello, Looking to fix my audio. I am new to hackintoshing. My system is fujitsu laptop AH532/G52 Ivy Bridge HD4000 Realtek ALC269vc (from linux codec dump). It has a mic jack and headphone jack. I have tried all the lay out ids for ALC269vc. Nothing worked until I tried the hotpatch method of RehabMan, audio worked with layout id = 6. Running Mojave. Even the other problems were fixed (brightness, Siri, etc., but USB ports were messed up). Until someone said I shouldn't be using another guide for another model so I reinstalled and here I am. I am not also familiar with patching (I've been googling around) but I don't know where to start. I made sure I tried everything I can before asking for help. Thanks! Let me know if you need other details.. codec0_info.txt Edited June 22, 2019 by notmacowner Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted June 22, 2019 Share Posted June 22, 2019 1 hour ago, arcanandrei said: Here are the layouts tested I didn't tested microphone front port at all because I don't have a microphone 3 - only front headphone port working (very bad quality) 11 - only front headphone port working 14 - only front headphone port working + shows additional line in input 15 - only front headphone port working + shows additional line in input 16 - only front headphone port working + shows additional line in input 28 - only front headphone port working + shows additional line in input Thank you very much Try this AppleALC.kext,, use LayoutID=21. Check the result and upload IOREG Output. AppleALC.kext.zip 1 hour ago, notmacowner said: Hello, Looking to fix my audio. I am new to hackintoshing. My system is fujitsu laptop AH532/G52 Ivy Bridge HD4000 Realtek ALC269vc (from linux codec dump). It has a mic jack and headphone jack. I have tried all the lay out ids for ALC269vc. Nothing worked until I tried the hotpatch method of RehabMan, audio worked with layout id = 6. Running Mojave. Even the other problems were fixed (brightness, Siri, etc., but USB ports were messed up). Until someone said I shouldn't be using another guide for another model so I reinstalled and here I am. I am not also familiar with patching (I've been googling around) but I don't know where to start. I made sure I tried everything I can before asking for help. Thanks! Let me know if you need other details.. codec0_info.txt From your information, it's look you don't know how to set layout ID correctly,, just try all layoutID in AppleALC.kext for ALC269VC Link to comment Share on other sites More sharing options...
arcanandrei Posted June 22, 2019 Share Posted June 22, 2019 (edited) 54 minutes ago, Andres ZeroCross said: Try this AppleALC.kext,, use LayoutID=21. Check the result and upload IOREG Output. AppleALC.kext.zip This is on the right track Front headphone jack gives very distorted sound (mono channel like, exactly like layout 3) Rear panel now works, but the sound lacks any kind of bass, it's only treble in the sound I attached the IOREG Thank you ioreg.txt Edited June 22, 2019 by arcanandrei attached IOREG Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted June 22, 2019 Share Posted June 22, 2019 1 minute ago, arcanandrei said: This is on the right track Front headphone jack gives very distorted sound (mono channel like, exactly like layout 3) Rear panel now works, but the sound lacks any kind of bass, it's only treble in the sound I attached the IOREG Thank you ioreg.txt What's IOREG TXT??? Use IORegistryExplorer.app dan save the output. Link to comment Share on other sites More sharing options...
arcanandrei Posted June 22, 2019 Share Posted June 22, 2019 4 minutes ago, Andres ZeroCross said: What's IOREG TXT??? Use IORegistryExplorer.app dan save the output. Sorry for that, I printed the IOREG HDEF@1F,3 from terminal and copied into a txt Here is the file saved from IORegistryExplorer Thank you Arcan’s iMac.zip Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted June 22, 2019 Share Posted June 22, 2019 12 minutes ago, arcanandrei said: Sorry for that, I printed the IOREG HDEF@1F,3 from terminal and copied into a txt Here is the file saved from IORegistryExplorer Thank you Arcan’s iMac.zip Use this,, keep using layoutID = 21. Post the result ASAP AppleALC.kext.zip Link to comment Share on other sites More sharing options...
arcanandrei Posted June 22, 2019 Share Posted June 22, 2019 6 minutes ago, Andres ZeroCross said: Use this,, keep using layoutID = 21. Post the result ASAP AppleALC.kext.zip The result is the same, but now the sound from rear jack is incredibly boosted, but still without any bass The front panel is the same, still distorted, undistinguished I also attached IOREG Thank you very much for helping me Arcan’s iMac-new.zip Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted June 22, 2019 Share Posted June 22, 2019 9 minutes ago, arcanandrei said: The result is the same, but now the sound from rear jack is incredibly boosted, but still without any bass The front panel is the same, still distorted, undistinguished I also attached IOREG Thank you very much for helping me Arcan’s iMac-new.zip 1. What's your motherboard model and name? 2. Make sure you have used Speaker in rear jack, don't use Earphone in Rear Jack. It's differenct Jack kind i thought 3. Try this kext, post the result AppleALC.kext.zip Link to comment Share on other sites More sharing options...
arcanandrei Posted June 22, 2019 Share Posted June 22, 2019 (edited) 23 minutes ago, Andres ZeroCross said: 1. What's your motherboard model and name? 2. Make sure you have used Speaker in rear jack, don't use Earphone in Rear Jack. It's differenct Jack kind i thought 3. Try this kext, post the result AppleALC.kext.zip Tried this kext, now the sound doesn't come at all, but the headphones are still detected in Sound Settings I only have 1 rear jack and 2 front jacks I have attached the IOREG as well Edit: I test with a pair of portable speakers and headphones, each jack one by one and then both at same time Edit 2: My motherboard is Intel B360 Thank you very much Arcan’s iMac-new2.zip Edited June 22, 2019 by arcanandrei Motherboard name Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted June 22, 2019 Share Posted June 22, 2019 8 minutes ago, arcanandrei said: Tried this kext, now the sound doesn't come at all, but the headphones are still detected in Sound Settings I only have 1 rear jack and 2 front jacks I have attached the IOREG as well Thank you very much Arcan’s iMac-new2.zip Now try this.. AppleALC.kext.zip Link to comment Share on other sites More sharing options...
notmacowner Posted June 22, 2019 Share Posted June 22, 2019 (edited) 2 hours ago, Andres ZeroCross said: From your information, it's look you don't know how to set layout ID correctly,, just try all layoutID in AppleALC.kext for ALC269VC Thank you @Andres ZeroCross for your response! What is the proper way of setting up layoutID? Here's what I did: attempt 1: -installed the AppleALC.kext that you provided to L/E/ using cp -R from terminal -sudo kextcache -i / -set clover config.plist/devices/audio/inject=21 -reboot, no sound, no output/input detected in sysprefs>sound attempt 2: -deleted AppleALC.kext from L/E/ -copied AppleALC.kext to clover/kext/other -config.plist/devices/audio/inject=21 -config.plist/systemparameters/InjectKexts=Yes -reboot, no change -tried config.plist/devices/audio/inject=6 reboot, no change, 13 reboot, no change I tried the ones from the ALC269VC under info.plist of the AppleALC in github before with the kext in L/E then in kext/others when nothing worked. Still no audio. The only one that worked was the RehabMan 'hotpatch' when I tried config.plist/devices/audio/inject=6 but this method I think involves not only audio fix but a 'collection of fixes'. Until someone told me its ONLY for HP and I might fry my internals. other info: installed Mojave using [sorry, insanelymac does not support, mybad] along with other USB and essential kexts (fakeSMC, realtek, fakepciid, etc...) ioregistry.ioreg Edited June 22, 2019 by notmacowner Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted June 22, 2019 Share Posted June 22, 2019 Just now, notmacowner said: Thank you @Andres ZeroCross for your response! What is the proper way of setting up layoutID? Here's what I did: attempt 1: -installed the AppleALC.kext that you provided to L/E/ using cp -R from terminal -sudo kextcache -i / -set clover config.plist/devices/audio/inject=21 -reboot, no sound, no output/input detected in sysprefs>sound attempt 2: -deleted AppleALC.kext from L/E/ -copied AppleALC.kext to clover/kext/other -config.plist/devices/audio/inject=21 -config.plist/systemparameters/InjectKexts=Yes -reboot, no change -tried config.plist/devices/audio/inject=6 reboot, no change, 13 reboot, no change I tried the ones from the ALC269VC under info.plist of the AppleALC in github before with the kext in L/E then in kext/others when nothing worked. Still no audio. The only one that worked was the RehabMan 'hotpatch' when I tried config.plist/devices/audio/inject=6 but this method I think involves not only audio fix but a 'collection of fixes'. Until someone told me its ONLY for HP and I might fry my internals. other info: installed Mojave using #####, installed clover with ##### along with other USB and essential kexts (fakeSMC, realtek, fakepciid, etc...) ioregistry.ioreg https://github.com/acidanthera/AppleALC/tree/master/Resources/ALC269 Read available Layout for ALC269,, try one by one Link to comment Share on other sites More sharing options...
arcanandrei Posted June 22, 2019 Share Posted June 22, 2019 6 minutes ago, Andres ZeroCross said: Now try this.. AppleALC.kext.zip Front panel gives distorted sound and rear panel gives very boosted sound but without any bass It's exactly like 2 iterations above I attached IOREG Thank you so much for trying to make this to work Arcan’s iMac-new3.zip Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted June 22, 2019 Share Posted June 22, 2019 Just now, arcanandrei said: Front panel gives distorted sound and rear panel gives very boosted sound but without any bass It's exactly like 2 iterations above I attached IOREG Thank you so much for trying to make this to work Arcan’s iMac-new3.zip I don't have any idea,, install CodecCommander.kext to Library/Extensions, rebuild kext cache. REMEMBER : you must put Codec COmmander to Library/Extensions no System/Libaray/Extensions. After that shutdown your pc, then Turn on again, and check your audio. 20 minutes ago, arcanandrei said: Tried this kext, now the sound doesn't come at all, but the headphones are still detected in Sound Settings I only have 1 rear jack and 2 front jacks I have attached the IOREG as well Edit: I test with a pair of portable speakers and headphones, each jack one by one and then both at same time Edit 2: My motherboard is Intel B360 Thank you very much Arcan’s iMac-new2.zip Btw, what's your motherboard name and model?? B360 is a chipset. There are THOUSAND B360 out there Link to comment Share on other sites More sharing options...
Recommended Posts