insanelyDeepak Posted March 3, 2019 Share Posted March 3, 2019 55 minutes ago, Te0 said: I have tried both Layout-id with AppleALC that you have attached. Same result, device present in system preferences but no audio from the green jack. did you try all jack back and front ?? how many input/outputs there ? ? Link to comment Share on other sites More sharing options...
Te0 Posted March 3, 2019 Share Posted March 3, 2019 (edited) 9 minutes ago, insanelyDeepak said: did you try all jack back and front ?? how many input/outputs there ? ? is a MSI h81l I tried all the outputs, both with speakers and headphones. I would like to point out that with mojave 10.13.6 and audio_cloverALC-130_v0.3 of Toleda it was working. I do not know if it can help Edited March 3, 2019 by Te0 Link to comment Share on other sites More sharing options...
insanelyDeepak Posted March 3, 2019 Share Posted March 3, 2019 14 minutes ago, Te0 said: is a MSI h81l I tried all the outputs, both with speakers and headphones. I would like to point out that with mojave 10.13.6 and audio_cloverALC-130_v0.3 of Toleda it was working. I do not know if it can help it suppose to work bcoz all layout1,2,3 5,13 are compatible with your codec_dump send me screenshot of system preferences devices Link to comment Share on other sites More sharing options...
Te0 Posted March 3, 2019 Share Posted March 3, 2019 53 minutes ago, insanelyDeepak said: it suppose to work bcoz all layout1,2,3 5,13 are compatible with your codec_dump send me screenshot of system preferences devices Link to comment Share on other sites More sharing options...
ea dd Posted March 5, 2019 Share Posted March 5, 2019 Hi. again Any1 help me please. This ioreg file is taken when 2 displays (Acer K242HYL 1080p LCD monitor and LG 43LF5400 42" TV) are connected. What i want is HDMI Audio through TV. On 2/12/2019 at 5:38 PM, ea dd said: hi. all i have replaced my old GeForce 9500GT with GTX 650 for installing Mojave. My rig info is in my signature. Installed Mojave and it runs cool but audio through HDMI does not work when connecting to TV. Same with High Sierra. Old card was working and it had a cable connecting the card to S/PDIF out header on mainboard. new card does not have such a thing. So i guess it is made to work without that S/PDIF cable. i have read somewhere that WhateverGreen.kext should fix HDMI audio problem and downloaded and installed it into /Library/Extension/ then fixed permission with Kext Utility. Rebooted and see WhateverGreen.kext is loaded. still no audio through HDMI. 17 2 0xffffff7f80f7d000 0x22000 0x22000 as.vit9696.Lilu (1.3.1) 2BA44B2C-289E-39B7-A92B-C28291D5FC26 <8 6 5 3 2 1> 18 0 0xffffff7f80f9f000 0x64000 0x64000 as.vit9696.WhateverGreen (1.2.6) 073AC103-5807-3374-8D23-F98A0975D391 <17 13 8 6 5 3 2 1> 19 0 0xffffff7f81016000 0xea000 0xea000 as.vit9696.AppleALC (1.3.4) 5A1678E9-EEB8-3646-9244-5B589288D960 <17 13 8 6 5 3 2 1> i'm using Lilu + AppleALC and my audio is working except HDMI. Please find attached file includes screenshots of sound output settings, system information audio and ioreg file and config.plist of clover. Help me please. thanks. attachment.zip Link to comment Share on other sites More sharing options...
dcshoes23 Posted March 6, 2019 Share Posted March 6, 2019 On 3/1/2019 at 1:44 PM, dcshoes23 said: Hi, could I get some help adding support for my Dell XPS 13 9370? ALC299 (Realtek ALC3271-CG with Waves MaxxAudio Pro) 10EC 0299 I tried the one layout that exists (21) and a device showed up in system preferences > Sound > Output but I did not hear any sound Clover codec dump attached. 9370-clover-codec-dump.zip @insanelyDeepak Could you help me out please? I have attached my Linux codec dump here too. xps13-alc3271-codec-dump-linux.zip Link to comment Share on other sites More sharing options...
Hameer Abbasi Posted March 6, 2019 Share Posted March 6, 2019 (edited) Hi everyone. I just wanted to report that audio after sleep is broken for me on the last two betas on ID 11 (10.14.4 beta 3 and 4). It was last known working on 10.14.3. Here are my details: Mobo: Z370 Aorus Gaming Ultra 2.0-OP Codec: ALC1220 IDs: 1, 2, 3: Popping audio. Technically 1 is the one for my mobo. 5, 11: Audio broken after sleep (I was using 11 and it broke on the betas above). 7: Works even on the latest betas. Thank you so much for your contributions, Vit! (Not pinging because not sure if it's welcome!) You're what's made hackintoshing easy/possible. In general, I've heard reports of popping audio with ALC1220. Edited March 6, 2019 by Hameer Abbasi Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted March 7, 2019 Share Posted March 7, 2019 20 hours ago, dcshoes23 said: @insanelyDeepak Could you help me out please? I have attached my Linux codec dump here too. xps13-alc3271-codec-dump-linux.zip Use the layoutID=21. I have made layoutID21 for its 1 Link to comment Share on other sites More sharing options...
dcshoes23 Posted March 7, 2019 Share Posted March 7, 2019 2 hours ago, Andres ZeroCross said: Use the layoutID=21. I have made layoutID21 for its Hi Andres, I tried layout id 21 and a device showed up in output but I could not hear anything coming out of the speakers. Thanks for your help! Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted March 7, 2019 Share Posted March 7, 2019 11 minutes ago, dcshoes23 said: Hi Andres, I tried layout id 21 and a device showed up in output but I could not hear anything coming out of the speakers. Thanks for your help! It's mean your node id different with Acer Helios. Can you upload your CodecDump.txt??? 1 Link to comment Share on other sites More sharing options...
dcshoes23 Posted March 7, 2019 Share Posted March 7, 2019 24 minutes ago, Andres ZeroCross said: It's mean your node id different with Acer Helios. Can you upload your CodecDump.txt??? This one or do you need something else? https://www.insanelymac.com/applications/core/interface/file/attachment.php?id=321917 Link to comment Share on other sites More sharing options...
MortyMars Posted March 8, 2019 Share Posted March 8, 2019 (edited) Hi ! Excuse me first for my bad english... My audio system is a Realtek ALC3236, and with a AppleHDA patched i have sound by the internal speakers of my laptop (ASUS R510LC) but not by the jack (sound crackles and is very weak). I should like to try the AppleALC method, but unfortunately my chipset is not supported... Could you help me please ? Thanks ;-) Laptop ASUS R510LC-XX084H | Motherboard X550LC CPU Intel Core i7-4500U Haswell | RAM 8 Go DDR3 1600 MHz HDD SATA 1To | GPUs nVidia GeForce GT720M / Intel HD4400 Chipset audio Realtek ALC3236 Multiboot Clover : macOS High Sierra / Windows 10 / Opensuse Leap 15 Edited March 8, 2019 by MortyMars Link to comment Share on other sites More sharing options...
MortyMars Posted March 8, 2019 Share Posted March 8, 2019 10 hours ago, MortyMars said: Hi ! Excuse me first for my bad english... My audio system is a Realtek ALC3236, and with a AppleHDA patched i have sound by the internal speakers of my laptop (ASUS R510LC) but not by the jack (sound crackles and is very weak). I should like to try the AppleALC method, but unfortunately my chipset is not supported... Could you help me please ? Thanks ;-) Laptop ASUS R510LC-XX084H | Motherboard X550LC CPU Intel Core i7-4500U Haswell | RAM 8 Go DDR3 1600 MHz HDD SATA 1To | GPUs nVidia GeForce GT720M / Intel HD4400 Chipset audio Realtek ALC3236 Multiboot Clover : macOS High Sierra / Windows 10 / Opensuse Leap 15 After reading different posts, I interest me about audio layout and the necessity to have DSDT and config.plist in coherence (I didn't understood yet..., I'm a noob :-| ) Since, after modification of my config.list (the easier to edit), my sound is well better through my jack..., not yet very powerful but more more clear :-) However, I don't understand how my speakers ran before, with incoherent values in the two files ???? Never mind, i think I'll keep my actual config with a functional AppleHDA. Thanks to the community who supply us in theses hard topics... Go on ! ;-) Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted March 9, 2019 Share Posted March 9, 2019 On 3/7/2019 at 8:14 PM, dcshoes23 said: This one or do you need something else? https://www.insanelymac.com/applications/core/interface/file/attachment.php?id=321917 Use this,, use layoutid=22. Sorry i am busy a few days ago. After using both of this kext then reboot and upload your IOREG Output AppleALC.kext.zip Lilu.kext.zip 1 1 Link to comment Share on other sites More sharing options...
MortyMars Posted March 9, 2019 Share Posted March 9, 2019 On 3/8/2019 at 11:58 AM, MortyMars said: Hi ! Excuse me first for my bad english... My audio system is a Realtek ALC3236, and with a AppleHDA patched i have sound by the internal speakers of my laptop (ASUS R510LC) but not by the jack (sound crackles and is very weak). I should like to try the AppleALC method, but unfortunately my chipset is not supported... Could you help me please ? Thanks ;-) Laptop ASUS R510LC-XX084H | Motherboard X550LC CPU Intel Core i7-4500U Haswell | RAM 8 Go DDR3 1600 MHz HDD SATA 1To | GPUs nVidia GeForce GT720M / Intel HD4400 Chipset audio Realtek ALC3236 Multiboot Clover : macOS High Sierra / Windows 10 / Opensuse Leap 15 16 hours ago, MortyMars said: After reading different posts, I interest me about audio layout and the necessity to have DSDT and config.plist in coherence (I didn't understood yet..., I'm a noob :-| ) Since, after modification of my config.list (the easier to edit), my sound is well better through my jack..., not yet very powerful but more more clear :-) However, I don't understand how my speakers ran before, with incoherent values in the two files ???? Never mind, i think I'll keep my actual config with a functional AppleHDA. Thanks to the community who supply us in theses hard topics... Go on ! ;-) Hi ! Me again... Bad news :-( In fact, the impression of a better working came because i'have made first tests with instrumental audio file, but voices on any media are always too bad... So I come back in the arena... Any idea about this enigmatic issue ? Some piste for support of ALC3236 ? Thanks ;-) Laptop ASUS R510LC-XX084H | Motherboard X550LCCPU Intel Core i7-4500U Haswell | RAM 8 Go DDR3 1600 MHzHDD SATA 1To | GPUs nVidia GeForce GT720M / Intel HD4400Chipset audio Realtek ALC3236Multiboot Clover : macOS High Sierra / Windows 10 / Opensuse Leap 15 Link to comment Share on other sites More sharing options...
dcshoes23 Posted March 9, 2019 Share Posted March 9, 2019 (edited) 14 hours ago, Andres ZeroCross said: Use this,, use layoutid=22. Sorry i am busy a few days ago. After using both of this kext then reboot and upload your IOREG Output AppleALC.kext.zip Lilu.kext.zip Used those two files, set layout to 22 and rebooted, attached is the IOReg output. Also, no worries about taking a few days, you're the one helping me! Thanks again! XPS13IOReg.zip Edited March 9, 2019 by dcshoes23 Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted March 10, 2019 Share Posted March 10, 2019 (edited) 11 hours ago, dcshoes23 said: Used those two files, set layout to 22 and rebooted, attached is the IOReg output. Also, no worries about taking a few days, you're the one helping me! Thanks again! XPS13IOReg.zip I can see audio is working now... Edited March 10, 2019 by Andres ZeroCross 1 Link to comment Share on other sites More sharing options...
dcshoes23 Posted March 10, 2019 Share Posted March 10, 2019 7 hours ago, Andres ZeroCross said: I can see audio is working now... I see "Internal Speakers" in the output tab but don't hear any sound coming out of my laptop speakers. When I go to the Input tab, and choose "Internal Microphone" and I talk, I see the activity bar moving. Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted March 10, 2019 Share Posted March 10, 2019 5 hours ago, dcshoes23 said: I see "Internal Speakers" in the output tab but don't hear any sound coming out of my laptop speakers. When I go to the Input tab, and choose "Internal Microphone" and I talk, I see the activity bar moving. Your IOREG show your audio is working,, 1. Try to completly shutdown your notebook and turn on again to macOS or, 2. Remove CodecCommander.kext if you used it 1 Link to comment Share on other sites More sharing options...
MortyMars Posted March 11, 2019 Share Posted March 11, 2019 On 3/9/2019 at 3:08 PM, MortyMars said: Hi ! Me again... Bad news :-( In fact, the impression of a better working came because i'have made first tests with instrumental audio file, but voices on any media are always too bad... So I come back in the arena... Any idea about this enigmatic issue ? Some piste for support of ALC3236 ? Thanks ;-) Hi, I've solved my pb by installing CodecCommander.kext of Rehabman (thanks), in L/E like recommended, and after editing the info.plist file... Thanks ;-) Link to comment Share on other sites More sharing options...
dcshoes23 Posted March 11, 2019 Share Posted March 11, 2019 4 hours ago, Andres ZeroCross said: Your IOREG show your audio is working,, 1. Try to completly shutdown your notebook and turn on again to macOS or, 2. Remove CodecCommander.kext if you used it I did not have CodecCommander.kext so I tried adding it and now audio works perfectly! Nice and loud and clear! Thanks for all of your help! Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted March 11, 2019 Share Posted March 11, 2019 8 hours ago, dcshoes23 said: I did not have CodecCommander.kext so I tried adding it and now audio works perfectly! Nice and loud and clear! Thanks for all of your help! Then it's mean your problem is about kextcache Link to comment Share on other sites More sharing options...
dcshoes23 Posted March 11, 2019 Share Posted March 11, 2019 2 hours ago, Andres ZeroCross said: Then it's mean your problem is about kextcache I tried removing it and rebuilding the kextcache but it doesn't work without CodecCommander. It just shows the output device but there is no sound. As soon as I add CodecCommander it works again. Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted March 11, 2019 Share Posted March 11, 2019 (edited) 10 minutes ago, dcshoes23 said: I tried removing it and rebuilding the kextcache but it doesn't work without CodecCommander. It just shows the output device but there is no sound. As soon as I add CodecCommander it works again. I don't think so. CodecCommander with Default Profile doesn't have ability to update custom command. There is no profile for ALC299 except you used custom SSDT for CodecCommander. Did you use DSDT/SSDT??? Edited March 11, 2019 by Andres ZeroCross Link to comment Share on other sites More sharing options...
dcshoes23 Posted March 11, 2019 Share Posted March 11, 2019 (edited) 1 hour ago, Andres ZeroCross said: I don't think so. CodecCommander with Default Profile doesn't have ability to update custom command. There is no profile for ALC299 except you used custom SSDT for CodecCommander. Did you use DSDT/SSDT??? I'm not using any DSDT or SSDT for Audio, at least that I could find. I have attached my clover folder, maybe you can see something I'm missing. CLOVER.zip Edited March 11, 2019 by dcshoes23 Link to comment Share on other sites More sharing options...
Recommended Posts