toleda Posted February 21, 2019 Share Posted February 21, 2019 15 hours ago, ea dd said: Anyone has any idea about it? IOReg shows WhateverGreen has enabled Nvidia HDMI audio Make and model of the 2 Apple Displays connected to the GTX 650? Attach an IOReg with a TV connected. Link to comment Share on other sites More sharing options...
IAmHolland Posted February 22, 2019 Share Posted February 22, 2019 1 hour ago, toleda said: PlatformsT.xml? YES PinConfigs.kext/Contents/Info.plist? Yes, Item 280 Use 4./Find: 01171cf0 01171d00 01171e00 01171f40 Never tried PinConfigurator.app; likely does not know pinconfig for 2 wire SPDIF Edit the existing pinconfig as noted, no need for PinConfigurator.app disables node 17, node 17 is already disabled: 01771cf0 01771d00 01771e00 01771f40 For the 1150, codec address is 01, use 4. (typo) Node 15 is not correct, Node 1e is correct, Find 01e71c90 01e71d61 01e71e4b 01e71f01 Thanks. I got it working last night, but didn't follow up. With a codec dump, using PinConfigurator.app, I reconfigured the PinConfig.kext to match the codec dump and everything is working now. Thanks for the help. Link to comment Share on other sites More sharing options...
qutongming Posted February 22, 2019 Share Posted February 22, 2019 (edited) 2 hours ago, toleda said: Looks like you made a local copy o 8 hours ago, IAmHolland said: Why not? Check that you don't have multiple copies of Lilu.kext. v1.3.0 requires a specific version or later. It shows in your kextstat, but it could be an install/setup issue? I have a Gigabyte Z97X-UD7-TH and it works fine for me. There are no source code changes targeting the ALC1150, specifically, in v1.3.0. The only reason it would fail to patch is if there are multiple versions of lilu. The last release of AppleALC is v1.3.5. You're running AppleALC v1.3.6. Where did you get that? Did you build it yourself? Are you using the correct version of Lilu.kext there and did you use the correct version when building AppleALC? The latest source code for Lilu.kext is 1.3.4, not 1.3.0. Similarly, the latest source code for AppleALC is 1.3.6. instead of 1.3.5. I downloaded it with terminal command git clone https://github.com/vit9696/AppleALC.git You can also get the source, code compiled here. https://github.com/acidanthera/AppleALC/archive/master.zip Check that you don't have multiple copies of Lilu.kext v1.3.0 requires a specific version or later. It shows in your kextstat, but it could be an install/setup issue? I'mthe latest version. Lilu.kext is 1.3.4 I am not good at English. I use translation. Thanks for your help Edited February 22, 2019 by qutongming Link to comment Share on other sites More sharing options...
qutongming Posted February 22, 2019 Share Posted February 22, 2019 (edited) 2 hours ago, toleda said: 1.3.6, AppleALC.kext did not run Looks like you made a local copy of the AppleALC repo and removed all Resources/non 1150 codecs, correct? Why? Thanks for your help 1.3.6, AppleALC.kext did not run Terminal View Loaded IORegistryExplorer View Loaded Use commands, not copies。 git clone https://github.com/vit9696/AppleALC.git AppleALC.kex1.3.6 New source code compilation But try copying 1.2.8_1150 codes Why is 1.0.0 to 1.2.8 okay? Why ? Ask for your help Edited February 22, 2019 by qutongming Link to comment Share on other sites More sharing options...
toleda Posted February 22, 2019 Share Posted February 22, 2019 45 minutes ago, qutongming said: 1.3.6, AppleALC.kext did not run IORegistryExplorer View Loaded Use commands, not copies。 git clone https://github.com/vit9696/AppleALC.git AppleALC.kex1.3.6 New source code compilation An IOReg screenshot is useless, IOReg/File/Save a Copy As ..., attach compressed copy. Repo: GitHub Desktop/clone, do not copy. Resources file is not complete, user error. Xcode/compile is successful, AppleALC.kext is incomplete; does not run, audio failure. Link to comment Share on other sites More sharing options...
qutongming Posted February 22, 2019 Share Posted February 22, 2019 (edited) 3 hours ago, toleda said: An IOReg screenshot is useless, IOReg/File/Save a Copy As ..., attach compressed copy. Repo: GitHub Desktop/clone, do not copy. Resources file is not complete, user error. Xcode/compile is successful, AppleALC.kext is incomplete; does not run, audio failure. New MacOs Mojave 10.14.3 Installation Today AppleALC Official Download AppleALC1.3.5 https://github.com/acidanthera/AppleALC/releases Equipment blank 1.3.5.RELEASE.zip IOReg file.zip Edited February 22, 2019 by qutongming Link to comment Share on other sites More sharing options...
qutongming Posted February 22, 2019 Share Posted February 22, 2019 (edited) 4 hours ago, toleda said: An IOReg screenshot is useless, IOReg/File/Save a Copy As ..., attach compressed copy. Repo: GitHub Desktop/clone, do not copy. Resources file is not complete, user error. Xcode/compile is successful, AppleALC.kext is incomplete; does not run, audio failure. New MacOs Mojave 10.14.3 Installation Today AppleALC Official Download AppleALC1.2.8 https://github.com/acidanthera/AppleALC/releases/download/1.2.8/1.2.8.RELEASE.zip Delete 1.3.5 and replace 1.2.8 Equipment blank !!!!! AppleALC Official Download AppleALC1.2.8 https://github.com/acidanthera/AppleALC/archive/1.2.8.zip modify kern_start.cpp PluginConfiguration ADDPR(config) { xStringify(PRODUCT_NAME), parseModuleVersion(xStringify(MODULE_VERSION)), LiluAPI::AllowNormal | LiluAPI::AllowInstallerRecovery, bootargOff, arrsize(bootargOff), bootargDebug, arrsize(bootargDebug), bootargBeta, arrsize(bootargBeta), KernelVersion::MountainLion, KernelVersion::HighSierra, modify Mojave []() { alc.init(); } }; Compile AppleALC1.2.8 Everything is perfect. Why ? Ask for your help good 1.2.8_AppleALC.kext.zip Edited February 22, 2019 by qutongming Link to comment Share on other sites More sharing options...
arsradu Posted February 22, 2019 Share Posted February 22, 2019 (edited) @qutongming What happens if you use Lilu 1.3.3 and AppleALC 1.3.5? Does it work for you? LayoutID 1 or 7. Cause it works perfectly fine for me with ALC1150. If you wanna try out the exact kexts I'm using, you can find both Lilu and AppleALC attached. Just curious if it works for you. Lilu1.3.3&AppleALC1.3.5.zip Update: looks like Lilu 1.3.4 and AppleALC 1.3.5 combo also works properly here. Edited February 22, 2019 by arsradu Link to comment Share on other sites More sharing options...
qutongming Posted February 22, 2019 Share Posted February 22, 2019 7 hours ago, toleda said: An IOReg screenshot is useless, IOReg/File/Save a Copy As ..., attach compressed copy. Repo: GitHub Desktop/clone, do not copy. Resources file is not complete, user error. Xcode/compile is successful, AppleALC.kext is incomplete; does not run, audio failure. Resources file is not complete, user error. Resources file (Not the 1150 source code problem)That's absolute. (AppleALC AppleALC.xcodeproj ResourceConverter)Source code issues Link to comment Share on other sites More sharing options...
qutongming Posted February 22, 2019 Share Posted February 22, 2019 (edited) 1 hour ago, arsradu said: @qutongming What happens if you use Lilu 1.3.3 and AppleALC 1.3.5? Does it work for you? LayoutID 1 or 7. Cause it works perfectly fine for me with ALC1150. If you wanna try out the exact kexts I'm using, you can find both Lilu and AppleALC attached. Just curious if it works for you. Lilu1.3.3&AppleALC1.3.5.zip Update: looks like Lilu 1.3.4 and AppleALC 1.3.5 combo also works properly here. Thank you very much for your kind help. Tested, Equipment blank 1.2.8 and 1.2.7 1.26......Very nice Lilu 1.3.3 and 1.3.4 1.3.2 No problem I don't understand English (Using translation) Edited February 22, 2019 by qutongming Link to comment Share on other sites More sharing options...
arsradu Posted February 22, 2019 Share Posted February 22, 2019 (edited) 48 minutes ago, qutongming said: Thank you very much for your kind help. Tested, Equipment blank 1.2.8 and 1.2.7 1.26......Very nice Lilu 1.3.3 and 1.3.4 1.3.2 No problem I don't understand English (Using translation) Lilu 1.3.3 and AppleALC 1.3.5 don't work for you? With LayoutID 1 or 7? Could you post your Clover config.plist file for analysis? Don't forget to remove all your private information from SMBIOS, if you have any. Also, make sure you're using the default/vanilla/untouched AppleHDA.kext. If you used other patches before, it would be a good thing to make sure the AppleHDA.kext is the original one. Edited February 22, 2019 by arsradu 2 Link to comment Share on other sites More sharing options...
ea dd Posted February 22, 2019 Share Posted February 22, 2019 (edited) 19 hours ago, toleda said: IOReg shows WhateverGreen has enabled Nvidia HDMI audio Make and model of the 2 Apple Displays connected to the GTX 650? Attach an IOReg with a TV connected. That 2 Apple displays are actually not apple displays. One is Acer K242HYL 1080p LCD monitor and other is LG 43LF5400 42" TV. That IOREG file is taken when both of them connected. Or do you mean i should connect only TV and disconnect monitor and take IOREG file? tnx, Edited February 22, 2019 by ea dd Link to comment Share on other sites More sharing options...
DrDude Posted February 22, 2019 Share Posted February 22, 2019 Thanks for all the good work going on here. I am trying to get audio on my laptop fully going and I am almost there. 1. Lenovo Thinkpad X1 Carbon 4th gen 2. CX20753_4 3. 3,21,22 using the version of AppleALC from this link in this topic 4. 10.13.6, 10.14.3 Now, with the version from the link, layout 22, it almost completely works (speakers, internal microphone, headphone jack). There is just one thing that does not work: when I insert a headset into the jack, the microphone does not work, although the switch is detected ('Internal Microphone' changes into 'Line in'). I want to note that the original poster for that version indicated that he does not use the microphone, so perhaps it's not working for his configuration either. As for me, I like FaceTime so I'd like to have the microphone working. I know the headset is fine, I've tested it in linux on the same laptop. I am attaching an ioreg zip and a linux codec dump. X1.ioreg.zip X1_audiodump_linux.txt Link to comment Share on other sites More sharing options...
qutongming Posted February 23, 2019 Share Posted February 23, 2019 (edited) 15 hours ago, arsradu said: Lilu 1.3.3 and AppleALC 1.3.5 don't work for you? With LayoutID 1 or 7? Could you post your Clover config.plist file for analysis? Don't forget to remove all your private information from SMBIOS, if you have any. Also, make sure you're using the default/vanilla/untouched AppleHDA.kext. If you used other patches before, it would be a good thing to make sure the AppleHDA.kext is the original one. New MacOs Mojave 10.14.3 Installation Clean system Main board: GA Z97X-UD3H Ver1.1 BIOS: Z97XUD3H.10b Sound Card: Realtek ALC 1150 I use Ozmosis.rom. Clover is not in use Every test brushes BIOS LayoutID 1 2 3 5 and 7 Tried one by one。 Brush BIOS 60 times, Installation system 3 times,Installation from 10.14.3MacOS and 10.13.6MacOS 10.14.3MacOS Now used 1.2.8 very good。 LayoutID 1 Injection utilizing DSDT 1.3.0 1.3.1 1.3.2 and 1.3.6 Equipment blank Why? BIOS, Replace only 1.3.0. Equipment blank Edited February 23, 2019 by qutongming Link to comment Share on other sites More sharing options...
arsradu Posted February 23, 2019 Share Posted February 23, 2019 (edited) 3 hours ago, qutongming said: New MacOs Mojave 10.14.3 Installation Clean system Main board: GA Z97X-UD3H Ver1.1 BIOS: Z97XUD3H.10b Sound Card: Realtek ALC 1150 I use Ozmosis.rom. Clover is not in use Every test brushes BIOS LayoutID 1 2 3 5 and 7 Tried one by one。 Brush BIOS 60 times, Installation system 3 times,Installation from 10.14.3MacOS and 10.13.6MacOS 10.14.3MacOS Now used 1.2.8 very good。 LayoutID 1 Injection utilizing DSDT 1.3.0 1.3.1 1.3.2 and 1.3.6 Equipment blankWhy?BIOS, Replace only 1.3.0. Equipment blank Alright. Are you using a patched SSDT/DSDT.aml file? Can you remove it and try without it? Also, could you upload your EFI/CLOVER folder so we can take a look? Edited February 23, 2019 by arsradu Link to comment Share on other sites More sharing options...
qutongming Posted February 23, 2019 Share Posted February 23, 2019 (edited) 43 minutes ago, arsradu said: Alright. Are you using a patched SSDT/DSDT.aml file? Can you remove it and try without it? Also, could you upload your EFI/CLOVER folder so we can take a look? I'm sorry I didn't use clover to boot so no EFI/CLOVER folder I use osmosis to boot DSDT.zip Edited February 23, 2019 by qutongming Link to comment Share on other sites More sharing options...
arsradu Posted February 23, 2019 Share Posted February 23, 2019 (edited) 59 minutes ago, qutongming said: I'm sorry I didn't use clover to boot so no EFI/CLOVER folder I use osmosis to boot DSDT.zip I see... Well, it might be different with Osmosis. I never used it. But, if you're patching sound via DSDT, I think you might need to remove that and let AppleALC.kext do its job. I'm not an expert with DSDTs, so unfortunately I can't help you with that. But it's usually a good idea not to combine two patches from two different sources. Maybe someone with more experience can take a look at your DSDT and figure out what's wrong there. Edited February 23, 2019 by arsradu 1 Link to comment Share on other sites More sharing options...
STLVNUB Posted February 23, 2019 Share Posted February 23, 2019 1 hour ago, qutongming said: I'm sorry I didn't use clover to boot so no EFI/CLOVER folder I use osmosis to boot DSDT.zip Have you tried VoodooHDA, as that is what is normally used with Ozmosis. 1 Link to comment Share on other sites More sharing options...
qutongming Posted February 23, 2019 Share Posted February 23, 2019 10 hours ago, arsradu said: I see... Well, it might be different with Osmosis. I never used it. But, if you're patching sound via DSDT, I think you might need to remove that and let AppleALC.kext do its job. I'm not an expert with DSDTs, so unfortunately I can't help you with that. But it's usually a good idea not to combine two patches from two different sources. Maybe someone with more experience can take a look at your DSDT and figure out what's wrong there. Thank you for your warm-hearted friends. Official Source Code Issue MacPro 6.1 is not supported Support iMac Pro 1.1 Replacement only (IMP11.88Z.0064.B30.1712081714 Mac-7BA5B2D9E42DDD94 iMacPro1,1 iMac Pro) Change only the configuration of the model (I use translation) 9 hours ago, STLVNUB said: Have you tried VoodooHDA, as that is what is normally used with Ozmosis. Thank you for your warm-hearted friends. Link to comment Share on other sites More sharing options...
tyufhl Posted February 23, 2019 Share Posted February 23, 2019 4 hours ago, qutongming said: Thank you for your warm-hearted friends. Official Source Code Issue MacPro 6.1 is not supported Support iMac Pro 1.1 Replacement only (IMP11.88Z.0064.B30.1712081714 Mac-7BA5B2D9E42DDD94 iMacPro1,1 iMac Pro) Change only the configuration of the model (I use translation) Thank you for your warm-hearted friends. and thank you Link to comment Share on other sites More sharing options...
qutongming Posted February 23, 2019 Share Posted February 23, 2019 On 2/20/2019 at 10:36 PM, toleda said: IOReg shows all ALC892 audio devices and working audio for layout 1. What problem are you trying to solve? AppleALC.kext_v1.3.6/ALC1150 working for layouts 1, 2 and 3; no source code problems. Attach IOReg and config.plist I use translation Thanks for your help, Source code issues, 1.3.6 does not support MacPro configuration Support iMacPro 1.1 Link to comment Share on other sites More sharing options...
arsradu Posted February 23, 2019 Share Posted February 23, 2019 4 hours ago, qutongming said: I use translation Thanks for your help, Source code issues, 1.3.6 does not support MacPro configuration Support iMacPro 1.1 It works fine for me with MacPro6,1 SMBIOS, and ALC1150. But I'm using Lilu 1.3.4 and AppleALC 1.3.5 (latest official builds). So it might be different. Also, I'm using Clover, not Osmosis. But if it works for you with iMacPro1,1, then maybe you can use that one instead. I personally had no issues with MacPro6,1. Link to comment Share on other sites More sharing options...
qutongming Posted February 23, 2019 Share Posted February 23, 2019 Thank you for your warm-hearted friends.I'm sorry, everybody.It's my configuration problem. Sorry for the author It's not a code problem 4 hours ago, arsradu said: It works fine for me with MacPro6,1 SMBIOS, and ALC1150. But I'm using Lilu 1.3.4 and AppleALC 1.3.5 (latest official builds). So it might be different. Also, I'm using Clover, not Osmosis. But if it works for you with iMacPro1,1, then maybe you can use that one instead. I personally had no issues with MacPro6,1. Thanks for your help 1 Link to comment Share on other sites More sharing options...
cajebax Posted February 24, 2019 Share Posted February 24, 2019 (edited) hi all, would someone be able to help? hope i am posting in the right section. im using lilu 134 and applealc 135, applehda should be vanilla HS. hardware are q9550/p5ql-em/gtx1060, sound chipset should be alc1200 (888 legacy?) update: DPCI Manager appears to detect it as ALC888S-VD. i think the layout-id should be 7, i have been trying 1 to 11 without luck. i have been trying to get audio working for past 3 days non stop and im running out of ideas. somehow HDEF and IOHDAcodecdevice 0 to show up, but nothing under iohdacodecdevice 1, i.e no output device for me please see attached my config / ioregistry / codec dump from linux if it helps. if require additional info please let me know and i will get back asap. many thanks. config.plist codec_dump0.txt p5ql-em-io.ioreg Edited February 24, 2019 by cajebax Link to comment Share on other sites More sharing options...
ammoune78 Posted February 24, 2019 Share Posted February 24, 2019 Quote 23 hours ago, qutongming said: New MacOs Mojave 10.14.3 Installation Clean system Main board: GA Z97X-UD3H Ver1.1 BIOS: Z97XUD3H.10b Sound Card: Realtek ALC 1150 I use Ozmosis.rom. Clover is not in use Every test brushes BIOS LayoutID 1 2 3 5 and 7 Tried one by one。 Brush BIOS 60 times, Installation system 3 times,Installation from 10.14.3MacOS and 10.13.6MacOS 10.14.3MacOS Now used 1.2.8 very good。 LayoutID 1 Injection utilizing DSDT 1.3.0 1.3.1 1.3.2 and 1.3.6 Equipment blank Why? BIOS, Replace only 1.3.0. Equipment blank Hi, Remove the layout id's from the DSDT, open your OzmosisDefaults with a plist app like plist edit pro, go to the boot-args, and ad alcid=1, save it, and replace it with the current one on the bios. You can replace it even if plist file, using UEFITool, and by replace body, set the extension to bi inserted as other, then go choose you OzmosisDefaults.plist you've just modified, UEFITool is able to convert the plist file to raw data. Now download the latest AppleALC source code, and unzip it. From the Resources folder on the AppleALC Master, delete all other codecs except the ALC1150. Now, download the Lilu Master source code, run the project using Xcode, and copy the resulted Lilu.kext to the AppleALC Master folder, open the project using Xcode, and convert the resulted small AppleALC.kext file size to ffs, replace it with the current one on the bios. Download the latest release of Lilu kext from the release page, convert it to ffs, replace it with the current one on the bios. Now, save the BIOS and refresh your mob with it. For the DSDT avoid using it, and instead, use a SSDT that contain all the patchs used in the DSDT, IMHO. Good Luck Link to comment Share on other sites More sharing options...
Recommended Posts