zerobokoo Posted February 8, 2019 Share Posted February 8, 2019 2 minutes ago, Andres ZeroCross said: I don't know, it's mirone's work for LayoutID =3. Can you upload your Codec_dump.txt again??? I will check it later Sure. Also, check your email ;-) codec0.txt Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted February 8, 2019 Share Posted February 8, 2019 2 minutes ago, zerobokoo said: Sure. Also, check your email ;-) codec0.txt Thanks for "thing" in my email I will check your codec dump.txt. I have a job to do. Just write your notebook model. Link to comment Share on other sites More sharing options...
zerobokoo Posted February 8, 2019 Share Posted February 8, 2019 Just now, Andres ZeroCross said: Thanks for "thing" in my email I will check your codec dump.txt. I have a job to do. Just write your notebook model. Ok. Don't worry. In fact, I don't need the microphone on MacOS. My notebook is Lenovo P40 Yoga, model number 20GQ-CTO1WW. Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted February 8, 2019 Share Posted February 8, 2019 18 minutes ago, zerobokoo said: Ok. Don't worry. In fact, I don't need the microphone on MacOS. My notebook is Lenovo P40 Yoga, model number 20GQ-CTO1WW. Use this config.plist, replace the old ones.. Then use this AppleALC.kext and replace the old ones. Reboot and check your internal mic, and upload your IOREG Output config.plist AppleALC.kext.zip Link to comment Share on other sites More sharing options...
carlo24 Posted February 8, 2019 Share Posted February 8, 2019 Hi, I didn't manage to get audio working from jack in my Lattepanda Alpha 800. How can I fix this? Link to comment Share on other sites More sharing options...
MacPeet Posted February 8, 2019 Share Posted February 8, 2019 ALC269 - for Latte Panda - LayoutID 17 (Hex 11 for DSDT) Codec available in the release AppleALC + Lilu !!! Link to comment Share on other sites More sharing options...
cloudy Posted February 8, 2019 Share Posted February 8, 2019 To get the audio jack work without dsdt, get the latest AppleALC1.3.4, and modify your config.plist for layout-id 17 as follows. Big Thanks to MacPeet for the new AppleALC.<Devices><key>Audio</key><dict><key>Inject</key><string>No</string><key>ResetHDA</key><true/></dict><key>Properties</key><dict><key>PciRoot(0x0)/Pci(0x1f,0x3)</key><dict><key>layout-id</key><data>EQAAAA==</data></dict></dict> Link to comment Share on other sites More sharing options...
sweet Posted February 8, 2019 Share Posted February 8, 2019 (edited) 10 hours ago, Andres ZeroCross said: You need CodecCommander.kext in Library/Extensions and use SSDT.aml or custom info.plist of codeccommander to set Pin Widget of your External Mic I have CX8200 chipset, and I have internal speakers and HDMI audio working, but my jack audio is not. I'm unsure, what to modify and how. My codec dumps are the following, using linux. cat /proc/asound/card0/codec#0 > ~/Desktop/codec_dump0.txt cat /proc/asound/card0/codec#2 > ~/Desktop/codec_dump2.txt codec_dump0.txt codec_dump2.txt Edited February 8, 2019 by sweet Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted February 9, 2019 Share Posted February 9, 2019 On 2/8/2019 at 6:48 PM, rottenpants said: Sorry for the delay yesterday I received my wifi/bt card to install on my laptop got at least wifi working. So my full specs are: Laptop Toshiba Kira 107 CPU: intel i7 5500u GPU: intel hd5500 Ram: 8GB Sound: Conexant CX 20751_2 My clover file is below with all the files you requested Thank you for taking your time to help me CLOVER.zip IORegistry.ioreg.zip Did your audio working right now? Link to comment Share on other sites More sharing options...
rottenpants Posted February 9, 2019 Share Posted February 9, 2019 51 minutes ago, Andres ZeroCross said: Did your audio working right now? No it's still not working Andres Link to comment Share on other sites More sharing options...
headkaze Posted February 9, 2019 Share Posted February 9, 2019 (edited) Pin Configurator v2.0 Released link Edited February 9, 2019 by headkaze 4 Link to comment Share on other sites More sharing options...
Andrey1970 Posted February 9, 2019 Share Posted February 9, 2019 1 hour ago, headkaze said: Pin Configurator v2.0 Released Please upload app in https://www.insanelymac.com/forum/files/category/10-apps/ 2 Link to comment Share on other sites More sharing options...
Rodion2010 Posted February 9, 2019 Share Posted February 9, 2019 (edited) Thanks for your work! some questions and ideas about "Apply Fix" option 1) Line Output must be renamed to Int Speaker ((014)71E10) to make Headphones Autodetect work correctly 2) First Mic need to have properties (018)71EA0 (018)71F91 internal and unknown to enable DSP Noise Reduction 3) Second Mic - to Line in (019)71E80 because Ext Mic does not work on Hackintoshes 4) AFAIK there is no need to sort groups in order 10 20 30 etc because default G and P numbering work OK tested with AD1988b, ALC 887, 888, 892, 1150 and several others Edited February 9, 2019 by Rodion2010 2 Link to comment Share on other sites More sharing options...
headkaze Posted February 9, 2019 Share Posted February 9, 2019 (edited) 2 hours ago, Rodion2010 said: Thanks for your work! some questions and ideas about "Apply Fix" option 1) Line Output must be renamed to Int Speaker ((014)71E10) to make Headphones Autodetect work correctly 2) First Mic need to have properties (018)71EA0 (018)71F91 internal and unknown to enable DSP Noise Reduction 3) Second mic - to Line in (019)71E80 because Ext Mic does not work on Hackintoshes 4) AFAIK there is no need to sort groups in order 10 20 30 etc because default G and P numbering work OK tested with AD1988b, ALC 887, 888, 892, 1150 and several others Thanks for your feedback. Can you please use your sanitize method on the attached file and post back the verbs for me to examine. Here are the current verb sanitize rules (from verbit): Remove 0x411111f0 / 0x400000f0 Remove CD at INT ATAPI 71c - Index should always be 0 71c - Group should be unique 71d - Set all Misc to 0 (Jack Detect) 71f - Location for Front Panel change 2 to 1 So you're saying number 4 is not necessary? Anything else besides your additions? Rodion2010.txt Edited February 10, 2019 by headkaze Link to comment Share on other sites More sharing options...
Rodion2010 Posted February 9, 2019 Share Posted February 9, 2019 here is an example from real Mac layout=10 two speakers can have the same Group G=4 with different P=0 and P=1 i think there is no need to modify these data at all, codec defaults are OK for most cases Color and location (front/back) seem to be "cosmetic" only, they do not modify any functionality 1 Link to comment Share on other sites More sharing options...
headkaze Posted February 9, 2019 Share Posted February 9, 2019 (edited) @Rodion2010 thanks again for your feedback. I have changed the verb sanitize rules. Can you please try Pin Configurator v2.0.1 and let me know if it works correctly now? Current verb sanitize rules: Remove 0x411111f0 / 0x400000f0 Remove CD at INT ATAPI 71c - Index should always be 0 (No need - Rodion2010) 71c - Group should be unique (No need - Rodion2010) 71d - Set all Misc to 0 (Jack Detect) 71f - Front Panel change Location from 2 to 1 (Cosmetic only - Rodion2010) 71e - Line Out must be set to Speaker for Headphone autodetect to work correctly (Rodion2010) 71e / 71f - First Microphone Port set to Internal + Jack / Connector set to Unknown (Enables DSP Noise Reduction - Rodion2010) 71e - Second Microphone Device set to Line In / Connector set to Unknown (Ext Mic doesn't work on Hackintoshes - Rodion2010) Edited February 10, 2019 by headkaze 1 Link to comment Share on other sites More sharing options...
Rodion2010 Posted February 10, 2019 Share Posted February 10, 2019 50 minutes ago, headkaze said: @Rodion2010 thanks again for your feedback. I have changed the verb sanitize rules. Can you please try Pin Configurator v2.0.1 and let me know if it works correctly now? it is impossible to check all the data in a short time but it looks much better now 1 Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted February 10, 2019 Share Posted February 10, 2019 (edited) @vit9696 i can confirm with Lilu.kext 1.3.3 + AppleALC 1.3.5 with all available layoutiD Release version Audio for ALC256 is stop working,, Then i replace with Lilu.kext 1.3.1 + AppleALC.kext 1.3.4 then audio is back. But i can't give you the log. Because i Remote the Notebook with Anydesk, it's so complicated@rottenpants maybe your case is same like this. Try to use Lilu.kext 1.3.1 + AppleALC.kext 1.3.4. Then upload your IOREG. Edited February 10, 2019 by Andres ZeroCross 1 Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted February 10, 2019 Share Posted February 10, 2019 Update : Use Lilu.kext 1.3.3 (release version) + AppleALC.kext 1.3.4 (Release version) audio is working but with Lilu.kext 1.3.3 (release version) + AppleALC.kext 1.3.5 (Release version) with all available LayoutID then ALC256 doesn't work. Sorry i can't attach the log. Just for information, because i remote the system. I am not near the device Link to comment Share on other sites More sharing options...
insanelyDeepak Posted February 10, 2019 Share Posted February 10, 2019 (edited) 10 hours ago, headkaze said: Pin Configurator v2.0 Released link Thanks good work 6 hours ago, headkaze said: @Rodion2010 thanks again for your feedback. I have changed the verb sanitize rules. Can you please try Pin Configurator v2.0.1 and let me know if it works correctly now? Current verb sanitize rules: Remove 0x411111f0 / 0x400000f0 Remove CD at INT ATAPI 71c - Index should always be 0 (No need - Rodion2010) 71c - Group should be unique (No need - Rodion2010) 71d - Set all Misc to 0 (Jack Detect) 71f - Front Panel change Location from 2 to 1 (Cosmetic only - Rodion2010) 71e - Line Out must be set to Speaker for Headphone autodetect to work correctly (Rodion2010) 71e / 71f - First Microphone Port set to Internal + Jack / Connector set to Unknown (Enables DSP Noise Reduction - Rodion2010) 71e - Second Microphone Device set to Line In / Connector set to Unknown (Ext Mic doesn't work on Hackintoshes - Rodion2010) all works fine tested with ALC887,ALC298,ALC255,ALC256,ALC299,ALC290,ALC294,ALC295,ALC288,ALC235,ALC233 ... Edited February 10, 2019 by insanelyDeepak 2 Link to comment Share on other sites More sharing options...
insanelyDeepak Posted February 10, 2019 Share Posted February 10, 2019 8 hours ago, Rodion2010 said: Thanks for your work! some questions and ideas about "Apply Fix" option 1) Line Output must be renamed to Int Speaker ((014)71E10) to make Headphones Autodetect work correctly 2) First Mic need to have properties (018)71EA0 (018)71F91 internal and unknown to enable DSP Noise Reduction 3) Second Mic - to Line in (019)71E80 because Ext Mic does not work on Hackintoshes 4) AFAIK there is no need to sort groups in order 10 20 30 etc because default G and P numbering work OK tested with AD1988b, ALC 887, 888, 892, 1150 and several others thank you these changes were neccessary and missing in old pinconfigurator app so i was doing all manually 2 Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted February 10, 2019 Share Posted February 10, 2019 Just now, insanelyDeepak said: thank you these changes were neccessary and missing in old pinconfigurator app so i was doing all manually I alway do it manually too 1 Link to comment Share on other sites More sharing options...
insanelyDeepak Posted February 10, 2019 Share Posted February 10, 2019 1 minute ago, Andres ZeroCross said: I alway do it manually too it's better to use this app now 2 Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted February 10, 2019 Share Posted February 10, 2019 (edited) 10 minutes ago, insanelyDeepak said: it's better to use this app now You're right,, it will decrease time to make resource for AppleALC This is codec dump ALC256 from Acer Swift 3 (SF314-54G). Yes, if you read the codec Dump, we can't see device Fixed Internal Mic and Jack External mic. And with this app, we can only see Internal Speaker and Headphone. No other device output, i think we can activate internal mic or external mic with try another Node ID codec_dump.txt Edited February 10, 2019 by Andres ZeroCross Link to comment Share on other sites More sharing options...
insanelyDeepak Posted February 10, 2019 Share Posted February 10, 2019 52 minutes ago, Andres ZeroCross said: You're right,, it will decrease time to make resource for AppleALC This is codec dump ALC256 from Acer Swift 3 (SF314-54G). Yes, if you read the codec Dump, we can't see device Fixed Internal Mic and Jack External mic. And with this app, we can only see Internal Speaker and Headphone. No other device output, i think we can activate internal mic or external mic with try another Node ID codec_dump.txt exactly it could reduce time , but still few things you still have to do manually old vs new both seems fine your codec_dump is strange no mic nodes there 1 Link to comment Share on other sites More sharing options...
Recommended Posts