Jump to content

AppleALC — dynamic AppleHDA patching


vit9696
5,390 posts in this topic

Recommended Posts

11 minutes ago, Andres ZeroCross said:

You still used 1.3.5 of AppleALC. Try to use version 1.3.4

image.png.c7f0213af71e8f3df1d6cc73d054b8b4.png

 

Sorry my bad. Installed the wrong kext. Just to be sure i install my kexts with a kext utility in Library/Extensions and after that i run the cache command

 

Edit: still no sound

 

IORegistry.ioreg

Edited by rottenpants
Link to comment
Share on other sites

19 hours ago, RayperZ said:

I've already did this, but I can't control both volumes at the same time, everytime I need to adjust them manually and individually, so I prefer to use speaker only and keyboard shortcuts too because the tweeter is recognized as headset or external speaker when something is plugged in in audio jack, so with the Multi-Output device I've this little issue...

I'll continue to study AppleALC patching and try it by myself while I wait for someone that help me before i become crazy. :wacko:

 

This configuration is only for laptops with Speaker L + R and Bass Speaker !!!

 

1.png.5400544fdf7ebf912246810cc4d21fa4.png

 

2.png.ccc88c72d10982f91e03d4123e635d61.png

Link to comment
Share on other sites

Hello, I use the latest lilu and AppleALC for my ALCS1220A, motherboard is Asus ASUS TUF Z390-PLUS GAMING (WI-FI). I can only see the Display port in Output. I can't use my headphone. I have tried layout 1,2,3,5,7, no luck.

 

Clover/ioreg/kextcache/codec dump as attached. 

 

Thanks very much.

image.thumb.png.de4741a0d5a1c8641eefb2aec4bd5118.png

sldaniel.zip

Edited by sldaniel
Link to comment
Share on other sites

Hello

I have a Lenovo P40 Yoga laptop. According to the official specs, it has a Conexant CX11852 codec, but according to Linux (where the audio works) it's a rebranded CX20753/4

I have installed the latest macOS Mojave and added the latest Lilu.kext (1.3.3) and AppleALC.kext (1.3.5) through Clover UEFI.

According to the sources, there are currently 2 configured layouts for this codec, with id 3 and 21. I have tried both (simply by setting 3 and 21 in the following piece of config and rebooting, please let me know if I'm missing some other step?) but no audio device appeared in OS X.

<key>Audio</key>
<dict>
    <key>Inject</key>
    <integer>3</integer>
    <key>ResetHDA</key>
    <true/>
</dict>

What else could I try?

 

I have attached my codec dump from Linux as well as my Clover config. Any help would be appreciated!

codec0.txt

config.plist

Link to comment
Share on other sites

8 hours ago, sldaniel said:

Hello, I use the latest lilu and AppleALC for my ALCS1220A, motherboard is Asus ASUS TUF Z390-PLUS GAMING (WI-FI). I can only see the Display port in Output. I can't use my headphone. I have tried layout 1,2,3,5,7, no luck.

 

Clover/ioreg/kextcache/codec dump as attached. 

 

Thanks very much.

image.thumb.png.de4741a0d5a1c8641eefb2aec4bd5118.png

sldaniel.zip


Your codec is 0x10ec0b00 then it's ALCS1200A not ALCS1220A.

Check supported layoutID in AppleALC.kext, use latest AppleALC.kext and post the result (IOREG output)

Link to comment
Share on other sites

2 hours ago, Andres ZeroCross said:


Your codec is 0x10ec0b00 then it's ALCS1200A not ALCS1220A.

Check supported layoutID in AppleALC.kext, use latest AppleALC.kext and post the result (IOREG output)

 

ALCS1200A is supported. Need to fix WiKi. Don't have time unfortunately:(

 

 

Screen Shot 2019-02-06 at 4.08.36 PM.png

  • Like 2
Link to comment
Share on other sites

1 minute ago, vandroiy2012 said:

 

ALCS1200A is supported. Need to fix WiKi. Don't have time unfortunately:(

 

 

Screen Shot 2019-02-06 at 4.08.36 PM.png

 

Yes, I thought it's not supported and after i see the Resource foldler I found the ALCS1200A. Now it works perfectly. Thanks very very much!

2 hours ago, Andres ZeroCross said:


Your codec is 0x10ec0b00 then it's ALCS1200A not ALCS1220A.

Check supported layoutID in AppleALC.kext, use latest AppleALC.kext and post the result (IOREG output)

 

Sorry for wasting your time for this silly mistake. I checked it again and now it works well.

 

Thank you so much.

  • Like 1
Link to comment
Share on other sites

Hi guys,

i've a new laptop and i'm trying to make the audio working with no luck.

 

Hackintool info :

Controller : Intel Sunrise Point-LP HD Audio

Codec: ALC256 (3246)

 

I'm using lastest AppleALC and lilu. I've also CodecCommander and SSDT-ALC256  and i've tried all the layout ID for my Codec.

13 it seems to be the best but not completely :

Headphones are working well

Internal speaker are working but it seems like the sound is coming  from the bottom of the laptop. I don't know how to explain but on Windows the internal speaker are louder and the sound is clear.

 

What can i do ?

 

Thanks

Mattia

 

Link to comment
Share on other sites

13 hours ago, tmbt said:

Hi guys,

i've a new laptop and i'm trying to make the audio working with no luck.

 

Hackintool info :

Controller : Intel Sunrise Point-LP HD Audio

Codec: ALC256 (3246)

 

I'm using lastest AppleALC and lilu. I've also CodecCommander and SSDT-ALC256  and i've tried all the layout ID for my Codec.

13 it seems to be the best but not completely :

Headphones are working well

Internal speaker are working but it seems like the sound is coming  from the bottom of the laptop. I don't know how to explain but on Windows the internal speaker are louder and the sound is clear.

 

What can i do ?

 

Thanks

Mattia

 

Whats' your notebook Model?? And upload your codec_dump.txt from live linux

Link to comment
Share on other sites

Great work Toleda!
 
Got my old dog ep-45-UD3R DSDT free with this cool hack. It’s an 889a chip working on ID # 5 for some reason. 
 
On each boot, the cp resets to built in sound. Is that normal?
What do you mean by "cp reset to built in audio". Please explain more detail.

Sent from my Mi Note 2 using Tapatalk

Link to comment
Share on other sites

Does anybody have any advice on what should I try to do?

 

 

On 2/6/2019 at 6:38 PM, zerobokoo said:

Hello

I have a Lenovo P40 Yoga laptop. According to the official specs, it has a Conexant CX11852 codec, but according to Linux (where the audio works) it's a rebranded CX20753/4

I have installed the latest macOS Mojave and added the latest Lilu.kext (1.3.3) and AppleALC.kext (1.3.5) through Clover UEFI.

According to the sources, there are currently 2 configured layouts for this codec, with id 3 and 21. I have tried both (simply by setting 3 and 21 in the following piece of config and rebooting, please let me know if I'm missing some other step?) but no audio device appeared in OS X.


<key>Audio</key>
<dict>
    <key>Inject</key>
    <integer>3</integer>
    <key>ResetHDA</key>
    <true/>
</dict>

What else could I try?

 

I have attached my codec dump from Linux as well as my Clover config. Any help would be appreciated!

codec0.txt

config.plist

 

Link to comment
Share on other sites

5 hours ago, Andres ZeroCross said:

What do you mean by "cp reset to built in audio". Please explain more detail.

Sent from my Mi Note 2 using Tapatalk
 

 

Sorry. The preference pane for sound doesn’t stay on line out after restart and resets to ‘built-in’ speakers

Link to comment
Share on other sites

 
Yes i cant figure out what the problem is. What do you think is causing this?
Bad configuration dsdt/ssdt + config.plist.

I can help,

1. Press f4 in GUI CLOVER (to dump oem acpi)
2. Zip your clover folder
3. Move all additional kexts from Library/extensions to Clover/extra/others
4. Write detail of your specifications
5. Zip all files and upload here

Sent from my Mi Note 2 using Tapatalk

Link to comment
Share on other sites

17 minutes ago, Andres ZeroCross said:

What are you doing??? There is no layoutID=13 for CX20753/4. Don't give random solution like that

Sent from my Mi Note 2 using Tapatalk
 

Sorry man. I saw some cx chips using 13. My solution was found fairly randomly after pulling hairs out for 48 hours with .sh and .command attempts.  A key thing for me was following the instructions on restoring AppleHDA.KEXT.

 

BTW. my -preferences are now sticking.

Link to comment
Share on other sites

×
×
  • Create New...