rottenpants Posted February 5, 2019 Share Posted February 5, 2019 (edited) 11 minutes ago, Andres ZeroCross said: You still used 1.3.5 of AppleALC. Try to use version 1.3.4 Sorry my bad. Installed the wrong kext. Just to be sure i install my kexts with a kext utility in Library/Extensions and after that i run the cache command Edit: still no sound IORegistry.ioreg Edited February 5, 2019 by rottenpants Link to comment Share on other sites More sharing options...
MacPeet Posted February 5, 2019 Share Posted February 5, 2019 19 hours ago, RayperZ said: I've already did this, but I can't control both volumes at the same time, everytime I need to adjust them manually and individually, so I prefer to use speaker only and keyboard shortcuts too because the tweeter is recognized as headset or external speaker when something is plugged in in audio jack, so with the Multi-Output device I've this little issue... I'll continue to study AppleALC patching and try it by myself while I wait for someone that help me before i become crazy. This configuration is only for laptops with Speaker L + R and Bass Speaker !!! Link to comment Share on other sites More sharing options...
sldaniel Posted February 6, 2019 Share Posted February 6, 2019 (edited) Hello, I use the latest lilu and AppleALC for my ALCS1220A, motherboard is Asus ASUS TUF Z390-PLUS GAMING (WI-FI). I can only see the Display port in Output. I can't use my headphone. I have tried layout 1,2,3,5,7, no luck. Clover/ioreg/kextcache/codec dump as attached. Thanks very much. sldaniel.zip Edited February 6, 2019 by sldaniel Link to comment Share on other sites More sharing options...
zerobokoo Posted February 6, 2019 Share Posted February 6, 2019 Hello I have a Lenovo P40 Yoga laptop. According to the official specs, it has a Conexant CX11852 codec, but according to Linux (where the audio works) it's a rebranded CX20753/4 I have installed the latest macOS Mojave and added the latest Lilu.kext (1.3.3) and AppleALC.kext (1.3.5) through Clover UEFI. According to the sources, there are currently 2 configured layouts for this codec, with id 3 and 21. I have tried both (simply by setting 3 and 21 in the following piece of config and rebooting, please let me know if I'm missing some other step?) but no audio device appeared in OS X. <key>Audio</key> <dict> <key>Inject</key> <integer>3</integer> <key>ResetHDA</key> <true/> </dict> What else could I try? I have attached my codec dump from Linux as well as my Clover config. Any help would be appreciated! codec0.txt config.plist Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted February 6, 2019 Share Posted February 6, 2019 8 hours ago, sldaniel said: Hello, I use the latest lilu and AppleALC for my ALCS1220A, motherboard is Asus ASUS TUF Z390-PLUS GAMING (WI-FI). I can only see the Display port in Output. I can't use my headphone. I have tried layout 1,2,3,5,7, no luck. Clover/ioreg/kextcache/codec dump as attached. Thanks very much. sldaniel.zip Your codec is 0x10ec0b00 then it's ALCS1200A not ALCS1220A. Check supported layoutID in AppleALC.kext, use latest AppleALC.kext and post the result (IOREG output) Link to comment Share on other sites More sharing options...
vandroiy2012 Posted February 6, 2019 Share Posted February 6, 2019 2 hours ago, Andres ZeroCross said: Your codec is 0x10ec0b00 then it's ALCS1200A not ALCS1220A. Check supported layoutID in AppleALC.kext, use latest AppleALC.kext and post the result (IOREG output) ALCS1200A is supported. Need to fix WiKi. Don't have time unfortunately 2 Link to comment Share on other sites More sharing options...
sldaniel Posted February 6, 2019 Share Posted February 6, 2019 1 minute ago, vandroiy2012 said: ALCS1200A is supported. Need to fix WiKi. Don't have time unfortunately Yes, I thought it's not supported and after i see the Resource foldler I found the ALCS1200A. Now it works perfectly. Thanks very very much! 2 hours ago, Andres ZeroCross said: Your codec is 0x10ec0b00 then it's ALCS1200A not ALCS1220A. Check supported layoutID in AppleALC.kext, use latest AppleALC.kext and post the result (IOREG output) Sorry for wasting your time for this silly mistake. I checked it again and now it works well. Thank you so much. 1 Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted February 6, 2019 Share Posted February 6, 2019 ALCS1200A is supported. Need to fix WiKi. Don't have time unfortunately Yes, i never said ALCS1200A is not supported, i said his codec is ALCS1200A Sent from my Mi Note 2 using Tapatalk Link to comment Share on other sites More sharing options...
rottenpants Posted February 6, 2019 Share Posted February 6, 2019 (edited) On 2/5/2019 at 2:27 PM, Andres ZeroCross said: You still used 1.3.5 of AppleALC. Try to use version 1.3.4 Tried what you recomended but i still have no sound. In the meantime i got my codec dump from linux dont know if that helps codec_dump.txt IORegistry.ioreg Edited February 6, 2019 by rottenpants Link to comment Share on other sites More sharing options...
tmbt Posted February 6, 2019 Share Posted February 6, 2019 Hi guys, i've a new laptop and i'm trying to make the audio working with no luck. Hackintool info : Controller : Intel Sunrise Point-LP HD Audio Codec: ALC256 (3246) I'm using lastest AppleALC and lilu. I've also CodecCommander and SSDT-ALC256 and i've tried all the layout ID for my Codec. 13 it seems to be the best but not completely : Headphones are working well Internal speaker are working but it seems like the sound is coming from the bottom of the laptop. I don't know how to explain but on Windows the internal speaker are louder and the sound is clear. What can i do ? Thanks Mattia Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted February 7, 2019 Share Posted February 7, 2019 13 hours ago, tmbt said: Hi guys, i've a new laptop and i'm trying to make the audio working with no luck. Hackintool info : Controller : Intel Sunrise Point-LP HD Audio Codec: ALC256 (3246) I'm using lastest AppleALC and lilu. I've also CodecCommander and SSDT-ALC256 and i've tried all the layout ID for my Codec. 13 it seems to be the best but not completely : Headphones are working well Internal speaker are working but it seems like the sound is coming from the bottom of the laptop. I don't know how to explain but on Windows the internal speaker are louder and the sound is clear. What can i do ? Thanks Mattia Whats' your notebook Model?? And upload your codec_dump.txt from live linux Link to comment Share on other sites More sharing options...
audio geek Posted February 7, 2019 Share Posted February 7, 2019 Great work Toleda! Got my old dog ep-45-UD3R DSDT free with this cool hack. It’s an 889a chip working on ID # 5 for some reason. On each boot, the cp resets to built in sound. Is that normal? Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted February 7, 2019 Share Posted February 7, 2019 Great work Toleda! Got my old dog ep-45-UD3R DSDT free with this cool hack. It’s an 889a chip working on ID # 5 for some reason. On each boot, the cp resets to built in sound. Is that normal?What do you mean by "cp reset to built in audio". Please explain more detail.Sent from my Mi Note 2 using Tapatalk Link to comment Share on other sites More sharing options...
zerobokoo Posted February 7, 2019 Share Posted February 7, 2019 Does anybody have any advice on what should I try to do? On 2/6/2019 at 6:38 PM, zerobokoo said: Hello I have a Lenovo P40 Yoga laptop. According to the official specs, it has a Conexant CX11852 codec, but according to Linux (where the audio works) it's a rebranded CX20753/4 I have installed the latest macOS Mojave and added the latest Lilu.kext (1.3.3) and AppleALC.kext (1.3.5) through Clover UEFI. According to the sources, there are currently 2 configured layouts for this codec, with id 3 and 21. I have tried both (simply by setting 3 and 21 in the following piece of config and rebooting, please let me know if I'm missing some other step?) but no audio device appeared in OS X. <key>Audio</key> <dict> <key>Inject</key> <integer>3</integer> <key>ResetHDA</key> <true/> </dict> What else could I try? I have attached my codec dump from Linux as well as my Clover config. Any help would be appreciated! codec0.txt config.plist Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted February 7, 2019 Share Posted February 7, 2019 5 minutes ago, zerobokoo said: Does anybody have any advice on what should I try to do? Upload your IOREG Output, Use IOREG version 2.1 Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted February 7, 2019 Share Posted February 7, 2019 21 hours ago, rottenpants said: Tried what you recomended but i still have no sound. In the meantime i got my codec dump from linux dont know if that helps codec_dump.txt IORegistry.ioreg Your codec dump.txt is same like other CX20751/2, no diffrent Link to comment Share on other sites More sharing options...
zerobokoo Posted February 7, 2019 Share Posted February 7, 2019 (edited) 19 minutes ago, Andres ZeroCross said: Upload your IOREG Output, Use IOREG version 2.1 Here it is. TIA p40yoga.zip Edited February 7, 2019 by zerobokoo zipped attachment Link to comment Share on other sites More sharing options...
rottenpants Posted February 7, 2019 Share Posted February 7, 2019 15 minutes ago, Andres ZeroCross said: Your codec dump.txt is same like other CX20751/2, no diffrent Yes i cant figure out what the problem is. What do you think is causing this? Link to comment Share on other sites More sharing options...
audio geek Posted February 7, 2019 Share Posted February 7, 2019 5 hours ago, Andres ZeroCross said: What do you mean by "cp reset to built in audio". Please explain more detail. Sent from my Mi Note 2 using Tapatalk Sorry. The preference pane for sound doesn’t stay on line out after restart and resets to ‘built-in’ speakers Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted February 7, 2019 Share Posted February 7, 2019 Sorry. The preference pane for sound doesn’t stay on line out after restart and resets to ‘built-in’ speakersIt's about nvram i think. Make sure your NVRAM is workingSent from my Mi Note 2 using Tapatalk Link to comment Share on other sites More sharing options...
audio geek Posted February 7, 2019 Share Posted February 7, 2019 4 hours ago, zerobokoo said: Does anybody have any advice on what should I try to do? Try ID 13 Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted February 7, 2019 Share Posted February 7, 2019 Yes i cant figure out what the problem is. What do you think is causing this?Bad configuration dsdt/ssdt + config.plist.I can help,1. Press f4 in GUI CLOVER (to dump oem acpi)2. Zip your clover folder3. Move all additional kexts from Library/extensions to Clover/extra/others4. Write detail of your specifications5. Zip all files and upload hereSent from my Mi Note 2 using Tapatalk Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted February 7, 2019 Share Posted February 7, 2019 Try ID 13 What are you doing??? There is no layoutID=13 for CX20753/4. Don't give random solution like thatSent from my Mi Note 2 using Tapatalk Link to comment Share on other sites More sharing options...
audio geek Posted February 7, 2019 Share Posted February 7, 2019 17 minutes ago, Andres ZeroCross said: What are you doing??? There is no layoutID=13 for CX20753/4. Don't give random solution like that Sent from my Mi Note 2 using Tapatalk Sorry man. I saw some cx chips using 13. My solution was found fairly randomly after pulling hairs out for 48 hours with .sh and .command attempts. A key thing for me was following the instructions on restoring AppleHDA.KEXT. BTW. my -preferences are now sticking. Link to comment Share on other sites More sharing options...
tmbt Posted February 7, 2019 Share Posted February 7, 2019 16 hours ago, Andres ZeroCross said: Whats' your notebook Model?? And upload your codec_dump.txt from live linux My laptop is : Huawei Matebook D 2018 Intel i5. Attached you will find my dump. Thanks Mattia codec-dump.txt Link to comment Share on other sites More sharing options...
Recommended Posts