Redoginzer Posted January 30, 2019 Share Posted January 30, 2019 (edited) Greetings, I am having problems with my audio. The information is as follows. (Some of the information I will add later and update this post.) The report is meant to contain: 1. Laptop model/Motherboard model: Acer Aspire TC-780A 2. Codec name: Realtek ALC 662 3. Layout used with the info what works for you (ideally if you try them all) : I Tried all available layouts. As follows: Audio Layout 5 Works, rear output and input are not recognized.(They dont even appear in settings) The sound works from the front output perfectly (Qaulity of sound no hissing, no skipping etc) but the sound output is very low. With the volume turned up to full it is audible but nowhere near where it should be. HDMI audio recognized (Have not tested it) Audio Layout 7 Not working no sound. No devices listed under audio Audio layout 11 Works, rear output and input are not recognized.(They dont even appear in settings) The sound works from the front output perfectly (Qaulity of sound no hissing, no skipping etc) but the sound output is very low. With the volume turned up to full it is audible but nowhere near where it should be. HDMI audio recognized (Have not tested it) Audio Layout 12 Works, rear output and input are not recognized.(They dont even appear in settings) The sound works from the front output perfectly (Qaulity of sound no hissing, no skipping etc) but the sound output is very low. With the volume turned up to full it is audible but nowhere near where it should be. HDMI audio recognized (Have not tested it) Audio Layout 13 Works, rear output and input are not recognized.(They dont even appear in settings) The sound works from the front output perfectly (Qaulity of sound no hissing, no skipping etc) but the sound output is very low. With the volume turned up to full it is audible but nowhere near where it should be. HDMI is also not recognized. 4. OS X versions you tried: 10.13 (High Sierra) 10.14 (Mojave) The result is the same in both. 5. Autogenerated Info.plist made with the help of this utility. Will add this later when I get home Thank you all in advance Edited January 30, 2019 by Redoginzer Link to comment Share on other sites More sharing options...
jiggyman Posted January 31, 2019 Share Posted January 31, 2019 (edited) On 3/7/2016 at 5:46 PM, vit9696 said: Hello, This is going to be a support/discussion topic of AppleALC on InsanelyMac. AppleALC is a kernel extension allowing you to enable native apple HD audio without any filesystem modifications. It dynamically injects the necessary modifications to AppleHDA (and other kexts) including the layouts, and makes your audio work starting from the OS installation. It should be noted that AppleALC starting with version 1.1.0 requires Lilu.kext to be put in the same folder as AppleALC.kext. See this topic for more details. For quite some time we are trying to obtain the necessary information about AppleALC codec compatibility. If you use something, please, consider checking the compatibility table (do not worry, it is in English), and report (here) on your codec. We are also looking for all the possible revisions of the codec, if we do not have the revisions listed for your codec please report as well. Thanks for understanding. The report is meant to contain: 1. Laptop model/Motherboard model 2. Codec name 3. Layout used with the info what works for you (ideally if you try them all) 4. OS X versions you tried 5. Autogenerated Info.plist made with the help of this utility. All the details including the source code are available on github:https://github.com/vit9696/AppleALC Some short wiki articles explaining the usage are included. As for now the project is relatively immature without practically any codec support. But it should be pretty easy to add more of them, I am hoping for the support of the "community" If you have any issues, better report them on github for structural reasons. Hi, my system specs: MacOS High Sierra 10.13.6 Clevo P750DM2-G Intel Z170 Board Intel Core i7 7700K Processer 64 GB RAM NVIDIA GeForce 1070 Discreet Video (No on-board video) HDA Codec #0: Realtek ALC899 HDA Codec ID: 0x10ec0899 Vendor: 0x10ec Device: 0x0899 I have tried numerous layouts: 1 = Internal Speaker only, no other output/inputs 2 = Internal Speaker, Line Out only 3 = Gives correct Input/Outputs, but no sound 5 = no sound 7 = doubles all inputs/outputs but gives internal speaker sound only 11 = Mic only 65 = Internal Speaker and Microphone only 98 = nothing 99 = nothing 101 = nothing Dumps are attached. Please help! Thanks! 0x10ec0899.zip Edited January 31, 2019 by jiggyman Link to comment Share on other sites More sharing options...
LockDown Posted February 1, 2019 Share Posted February 1, 2019 (edited) Just for fun, compiled targeting 10.7, and it works! WOW! I have to edit minkernel of course Edited February 1, 2019 by ellaosx Link to comment Share on other sites More sharing options...
tyufhl Posted February 1, 2019 Share Posted February 1, 2019 21 hours ago, jiggyman said: Hi, my system specs: MacOS High Sierra 10.13.6 Clevo P750DM2-G Intel Z170 Board Intel Core i7 7700K Processer 64 GB RAM NVIDIA GeForce 1070 Discreet Video (No on-board video) HDA Codec #0: Realtek ALC899HDA Codec ID: 0x10ec0899Vendor: 0x10ecDevice: 0x0899 I have tried numerous layouts: 1 = Internal Speaker only, no other output/inputs 2 = Internal Speaker, Line Out only 3 = Gives correct Input/Outputs, but no sound 5 = no sound 7 = doubles all inputs/outputs but gives internal speaker sound only 11 = Mic only 65 = Internal Speaker and Microphone only 98 = nothing 99 = nothing 101 = nothing Dumps are attached. Please help! Thanks! 0x10ec0899.zip Check, layout 66. 899.zip Link to comment Share on other sites More sharing options...
jiggyman Posted February 1, 2019 Share Posted February 1, 2019 1 hour ago, tyufhl said: Check, layout 66. 899.zip I have no audio at all with that one. Link to comment Share on other sites More sharing options...
jiggyman Posted February 1, 2019 Share Posted February 1, 2019 22 hours ago, jiggyman said: Hi, my system specs: MacOS High Sierra 10.13.6 Clevo P750DM2-G Intel Z170 Board Intel Core i7 7700K Processer 64 GB RAM NVIDIA GeForce 1070 Discreet Video (No on-board video) HDA Codec #0: Realtek ALC899 HDA Codec ID: 0x10ec0899 Vendor: 0x10ec Device: 0x0899 I have tried numerous layouts: 1 = Internal Speaker only, no other output/inputs 2 = Internal Speaker, Line Out only 3 = Gives correct Input/Outputs, but no sound 5 = no sound 7 = doubles all inputs/outputs but gives internal speaker sound only 11 = Mic only 65 = Internal Speaker and Microphone only 98 = nothing 99 = nothing 101 = nothing Dumps are attached. Please help! Thanks! 0x10ec0899.zip Attached updated Dump file. VoodooHDA_Dump Link to comment Share on other sites More sharing options...
tyufhl Posted February 1, 2019 Share Posted February 1, 2019 14 minutes ago, jiggyman said: I have no audio at all with that one. show ioreg. Link to comment Share on other sites More sharing options...
insanelyDeepak Posted February 1, 2019 Share Posted February 1, 2019 On 1/30/2019 at 6:37 AM, Redoginzer said: but the sound output is very low input or outputs ? Link to comment Share on other sites More sharing options...
tyufhl Posted February 1, 2019 Share Posted February 1, 2019 21 minutes ago, jiggyman said: Attached updated Dump file. VoodooHDA_Dump sorry for confusion. layout 66. AppleALC.kext.zip 1 Link to comment Share on other sites More sharing options...
jiggyman Posted February 1, 2019 Share Posted February 1, 2019 35 minutes ago, tyufhl said: show ioreg. IORegistry.zip Link to comment Share on other sites More sharing options...
jiggyman Posted February 1, 2019 Share Posted February 1, 2019 27 minutes ago, tyufhl said: sorry for confusion. layout 66. AppleALC.kext.zip Layout 66 worked perfectly! Thanks. I wish I knew what you did and how you did it :). Link to comment Share on other sites More sharing options...
tyufhl Posted February 1, 2019 Share Posted February 1, 2019 30 minutes ago, jiggyman said: Layout 66 worked perfectly! Thanks. I wish I knew what you did and how you did it :). here are the resources. ALC898.zip 1 Link to comment Share on other sites More sharing options...
BlackPilot Posted February 2, 2019 Share Posted February 2, 2019 12 hours ago, jiggyman said: Layout 66 worked perfectly! Thanks. I wish I knew what you did and how you did it :). Hello bro I have my IDT Audio Codec (onboard) I guess the Layout 19 would work for it But tell me, is it really neccesary to upload here my Codec Dump?? Link to comment Share on other sites More sharing options...
jiggyman Posted February 2, 2019 Share Posted February 2, 2019 Hello bro I have my IDT Audio Codec (onboard) I guess the Layout 19 would work for it But tell me, is it really neccesary to upload here my Codec Dump??You don't have to, but if you want someone to help you with your sound, reply to the OP with the information requested. Sent from my SM-N960U using Tapatalk 1 Link to comment Share on other sites More sharing options...
AlGrey Posted February 2, 2019 Share Posted February 2, 2019 (edited) Someone more knowledgeable can help me out with the mic input issue on Realtek ALC1220 (AMD ZEN)? None of the current layouts would record input when device is selected. Here is a codec dump. Thanks ! codec.zip Edited February 2, 2019 by AlGrey Link to comment Share on other sites More sharing options...
MacPeet Posted February 2, 2019 Share Posted February 2, 2019 hello @vandroiy2012 I have a new codec, everything works. ALC283 - LayoutID 15 (0F) for LENOVO IDEAPAD 14 new_Resources_ALC283.zip can you please added the new codec? Please do not forget the last ones: https://www.insanelymac.com/forum/topic/311293-applealc-—-dynamic-applehda-patching/?do=findComment&comment=2658501 https://www.insanelymac.com/forum/topic/311293-applealc-—-dynamic-applehda-patching/?do=findComment&comment=2659091 many thanks 1 Link to comment Share on other sites More sharing options...
RayperZ Posted February 2, 2019 Share Posted February 2, 2019 (edited) Hi everyone! Hi've a Huawei Matebook D 14" 2018 with Intel i5-8250u and UHD 620 and a Realtek ALC256, I've an issue, using the AppleALC last version only tweeter works using layout 11. If necessary I can attach the codec_dump, IOReg, EFI or other infos. Can anyone help to solve my problem? Thanks Edited February 2, 2019 by RayperZ Link to comment Share on other sites More sharing options...
tyufhl Posted February 2, 2019 Share Posted February 2, 2019 (edited) 22 hours ago, jiggyman said: Layout 66 worked perfectly! Thanks. I wish I knew what you did and how you did it :). I asked vandroiy2012 to add your resources to AppleALC base. Edited February 2, 2019 by tyufhl 2 Link to comment Share on other sites More sharing options...
hogfan Posted February 3, 2019 Share Posted February 3, 2019 On 1/27/2019 at 5:36 PM, Andres ZeroCross said: Your codec is 0x10EC0269 Revision 0x100100. It's ALC269. Try various layoutID with appleALC.kext. Check here https://github.com/acidanthera/AppleALC/tree/master/Resources/ALC269 You will get sound with that. It's not ALC259 Thanks! I was able to get it working using layout ID 4 for ALC 269. Must just be a error in the description of that codec dump. Link to comment Share on other sites More sharing options...
ituser01 Posted February 3, 2019 Share Posted February 3, 2019 Hello everybody, I am a newbie to hackintosh and I'm sorry for my bad english. My hackintosh is working fine but there are some optimization I will do as soon as possible. Here I would like to get help to fix my audio problem. At the current time my audio is working with VoodooHDA.kext but the audio quality is very poor and very quiet. In the first post of this topic I read the required information you need for supporting us: On 3/7/2016 at 11:46 PM, vit9696 said: The report is meant to contain: 1. Laptop model/Motherboard model 2. Codec name 3. Layout used with the info what works for you (ideally if you try them all) 4. OS X versions you tried 5. Autogenerated Info.plist made with the help of this utility. Here are my information: Lenovo ThinkPad E580 Conexant CX11852 no layouts used because the codec is not in the compatibility table macOS 10.14.2 the tool is not available in the given link, therefore I don't know how to generate Info.plist By using hackintool (Intel FB-Patcher) I have found out, that my Audio Controller is Intel Sunrise Point-LP HD Audio (8086:9D71) but because of my code is not within the compatibility table I can't use any layout ID. I would be very happy if there is someone who can help me. Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted February 3, 2019 Share Posted February 3, 2019 On 2/2/2019 at 8:31 PM, RayperZ said: Hi everyone! Hi've a Huawei Matebook D 14" 2018 with Intel i5-8250u and UHD 620 and a Realtek ALC256, I've an issue, using the AppleALC last version only tweeter works using layout 11. If necessary I can attach the codec_dump, IOReg, EFI or other infos. Can anyone help to solve my problem? Thanks Use this,, use LayoutID = 22. Post the IOREG after reboot AppleALC.kext.zip 44 minutes ago, ituser01 said: Hello everybody, I am a newbie to hackintosh and I'm sorry for my bad english. My hackintosh is working fine but there are some optimization I will do as soon as possible. Here I would like to get help to fix my audio problem. At the current time my audio is working with VoodooHDA.kext but the audio quality is very poor and very quiet. In the first post of this topic I read the required information you need for supporting us: Here are my information: Lenovo ThinkPad E580 Conexant CX11852 no layouts used because the codec is not in the compatibility table macOS 10.14.2 the tool is not available in the given link, therefore I don't know how to generate Info.plist By using hackintool (Intel FB-Patcher) I have found out, that my Audio Controller is Intel Sunrise Point-LP HD Audio (8086:9D71) but because of my code is not within the compatibility table I can't use any layout ID. I would be very happy if there is someone who can help me. Post your Codec Dump. Use Live Linux to Dump your Codec Link to comment Share on other sites More sharing options...
RayperZ Posted February 3, 2019 Share Posted February 3, 2019 1 hour ago, Andres ZeroCross said: Use this,, use LayoutID = 22. Post the IOREG after reboot AppleALC.kext.zip Post your Codec Dump. Use Live Linux to Dump your Codec I've attached the IOREG (without CodecCommander and ResetHDA). I've tried all combinations using too CodecCommander and/or ResetHDA but I still have no audio recognized. IORegistry Output.ioreg Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted February 3, 2019 Share Posted February 3, 2019 6 minutes ago, RayperZ said: I've attached the IOREG (without CodecCommander and ResetHDA). I've tried all combinations using too CodecCommander and/or ResetHDA but I still have no audio recognized. IORegistry Output.ioreg Your IOREG show ALC 1.3.3 not 1.3.5,, i have sent your AppleALC.kext version 1.3.5. Duplicate kexts or maybe you used wrong kext Link to comment Share on other sites More sharing options...
RayperZ Posted February 3, 2019 Share Posted February 3, 2019 11 minutes ago, Andres ZeroCross said: Your IOREG show ALC 1.3.3 not 1.3.5,, i have sent your AppleALC.kext version 1.3.5. Duplicate kexts or maybe you used wrong kext Okay, now I've checked and my ALC is 1.3.5 and attached the new IOREG. I've 2 audio output, both as Internal Speaker: with the first one only tweeter plays, with the second one only bottom speaker plays. IOREG Output.ioreg Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted February 3, 2019 Share Posted February 3, 2019 1 minute ago, RayperZ said: Okay, now I've checked and my ALC is 1.3.5 and attached the new IOREG. I've 2 audio output, both as Internal Speaker: with the first one only tweeter plays, with the second one only bottom speaker plays. IOREG Output.ioreg Yes,, you can select one of those internal speaker. Your notebook has 2 internal speaker Link to comment Share on other sites More sharing options...
Recommended Posts