paulopina Posted January 19, 2019 Share Posted January 19, 2019 28 minutes ago, paulopina said: Uh, sorry! As I am not sure to understand (English is not my native language) So it is impossible to send the sound to the internal speakers if I have a jack connected? Because I wanted to use the application "Audio Hijack" to dispatcher the audio to wish. My concern is to be able to send the audio source of an application to the audio output that I want. for example "QuickTime" to HDMI "Safari" to the internal speakers "FaceTime" to the headphones 28 minutes ago, paulopina said: Uh, sorry! As I am not sure to understand (English is not my native language) So it is impossible to send the sound to the internal speakers if I have a jack connected? Because I wanted to use the application "Audio Hijack" to dispatcher the audio to wish. My concern is to be able to send the audio source of an application to the audio output that I want. for example "QuickTime" to HDMI "Mail" to the internal speakers "FaceTime" to the headphones Quote Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted January 19, 2019 Share Posted January 19, 2019 Hi @vandroiy2012 I add make resource for ALC294 in ASUS ZenBook Flip 14 UX461UA. @paulopina has tested it and work all. Here is the resource files,, i set layoutID = 21. Please check this pull request https://github.com/acidanthera/AppleALC/pull/375 Platforms21.xml PinConfigs.kext.zip layout21.xml Info.plist codec_dump.txt.svg codec_dump.txt AppleALC.kext.zip 1 Link to comment Share on other sites More sharing options...
an3k Posted January 19, 2019 Share Posted January 19, 2019 8 hours ago, Andres ZeroCross said: You need to upload your Codec_dump.txt from Live Linux CX8200: Codec dump retrieved from Linux terminal: cat /proc/asound/card0/codec#0 > ~/Desktop/codec_dump0.txt codec_dump0.txt HDMI: Codec dump retrieved from Linux terminal: cat /proc/asound/card0/codec#2 > ~/Desktop/codec_dump2.txt codec_dump2.txt Link to comment Share on other sites More sharing options...
paulopina Posted January 19, 2019 Share Posted January 19, 2019 51 minutes ago, Andres ZeroCross said: Bonjour @ vandroiy2012J'ajoute une ressource de création pour ALC294 dans ASUS ZenBook Flip 14 UX461UA. @paulopina l' a testé et fonctionne parfaitement . Voici les fichiers de ressources, i set layoutID = 21. Vérifiez cette demande d'extraction à l' adresse https://github.com/acidanthera/AppleALC/pull/375. Platforms21.xml PinConfigs.kext.zip layout21.xml Info.plist codec_dump.txt.svg codec_dump.txt AppleALC.kext.zip Do you have a solution for switch between internal speaker and headphones? Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted January 19, 2019 Share Posted January 19, 2019 6 minutes ago, paulopina said: Do you have a solution for switch between internal speaker and headphones? It's already switch,, when you plug in your headphone then output will be to Headphone Link to comment Share on other sites More sharing options...
paulopina Posted January 19, 2019 Share Posted January 19, 2019 6 minutes ago, Andres ZeroCross said: It's already switch,, when you plug in your headphone then output will be to Headphone Yes, it works. But I wish I could manually switch between the 2 outputs. I can switch the 2 inputs but not the outputs (except HDMI that I can manually switch). Quote Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted January 19, 2019 Share Posted January 19, 2019 1 hour ago, an3k said: CX8200: Codec dump retrieved from Linux terminal: cat /proc/asound/card0/codec#0 > ~/Desktop/codec_dump0.txt codec_dump0.txt HDMI: Codec dump retrieved from Linux terminal: cat /proc/asound/card0/codec#2 > ~/Desktop/codec_dump2.txt codec_dump2.txt Try this,, use layoutID = 21. Post the result, and upload your IOREG AppleALC.kext.zip 22 minutes ago, paulopina said: Yes, it works. But I wish I could manually switch between the 2 outputs. I can switch the 2 inputs but not the outputs (except HDMI that I can manually switch). Try this,, post the result AppleALC.kext.zip Link to comment Share on other sites More sharing options...
an3k Posted January 19, 2019 Share Posted January 19, 2019 (edited) 41 minutes ago, Andres ZeroCross said: Try this,, use layoutID = 21. Post the result, and upload your IOREG AppleALC.kext.zip Used the attached AppleALC.kext and set layout-id 21: No External Output or Input but Internal Audio Out / In works as before: layout-id21.ioreg.zip Edited January 19, 2019 by an3k Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted January 19, 2019 Share Posted January 19, 2019 layout-id21.ioreg.zipHow about the result?Sent from my Mi Note 2 using Tapatalklayout-id21.ioreg.zipHow about the result?Sent from my Mi Note 2 using Tapatalk Link to comment Share on other sites More sharing options...
an3k Posted January 19, 2019 Share Posted January 19, 2019 (edited) 13 minutes ago, Andres ZeroCross said: How about the result? Sent from my Mi Note 2 using Tapatalk How about the result? Sent from my Mi Note 2 using Tapatalk Sorry, couldn't write anything (just quoting and attaching) from my Hack so uploaded from there and edited my posting on my PC. 14 minutes ago, an3k said: Used the attached AppleALC.kext and set layout-id 21: No External Output or Input but Internal Audio Out / In works as before: layout-id21.ioreg.zip Edited January 19, 2019 by an3k Link to comment Share on other sites More sharing options...
paulopina Posted January 19, 2019 Share Posted January 19, 2019 1 hour ago, Andres ZeroCross said: Try this,, use layoutID = 21. Post the result, and upload your IOREG AppleALC.kext.zip Try this,, post the result AppleALC.kext.zip everything works perfectly. I can switch the inputs and outputs. Quote Thank you very much for your work. MacBook Pro.zip Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted January 19, 2019 Share Posted January 19, 2019 9 minutes ago, paulopina said: everything works perfectly. I can switch the inputs and outputs. Thank you very much for your work. MacBook Pro.zip You're welcome. Enjoy your hackintosh. 45 minutes ago, an3k said: Couldn't write anything from my Hack so uploaded there and edited my posting. How about this,, post the result AppleALC.kext.zip Link to comment Share on other sites More sharing options...
an3k Posted January 19, 2019 Share Posted January 19, 2019 10 minutes ago, Andres ZeroCross said: How about this,, post the result AppleALC.kext.zip Without anything attached I see Internal Speakers and Internal Microphone. Both working as before. However, when plugging in my stereo cable from my headphones while being in System Settings > Audio > Output "Internal Speakers" are gone and changed to "Headphones" and I do get Stereo audio. Also Volume and Balance sliders are independent for both devices. Excellent! Thank you very much! Is it possible to have both Outputs/Inputs listed the whole time or is this normal macOS behavior? I don't have a 3,5 mm Headset cable (only a Headphones one) so I can't test how Audio-In behaves but I'll get one as soon as possible and test it. I assume it will work as awesome as Audio-Out. Link to comment Share on other sites More sharing options...
an3k Posted January 19, 2019 Share Posted January 19, 2019 25 minutes ago, an3k said: Without anything attached I see Internal Speakers and Internal Microphone. Both working as before. However, when plugging in my stereo cable from my headphones while being in System Settings > Audio > Output "Internal Speakers" are gone and changed to "Headphones" and I do get Stereo audio. Also Volume and Balance sliders are independent for both devices. Excellent! Thank you very much! Is it possible to have both Outputs/Inputs listed the whole time or is this normal macOS behavior? I don't have a 3,5 mm Headset cable (only a Headphones one) so I can't test how Audio-In behaves but I'll get one as soon as possible and test it. I assume it will work as awesome as Audio-Out. Stupid me had a Headset (somewhere tucked away). As with Headphones plugging in a Headset works perfectly for Audio-Out. For Audio-In however while it changes from "Internal Microphone" to "Line-In" there is no actual audio input (tried system settings as well as voice recorder). I made sure that both the port as well as the plug are using the same layout. Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted January 19, 2019 Share Posted January 19, 2019 Stupid me had a Headset (somewhere tucked away). As with Headphones plugging in a Headset works perfectly for Audio-Out. For Audio-In however while it changes from "Internal Microphone" to "Line-In" there is no actual audio input (tried system settings as well as voice recorder). I made sure that both the port as well as the plug are using the same layout.I will check later, i will upload new kext several hours from nowSent from my Mi Note 2 using Tapatalk Link to comment Share on other sites More sharing options...
sleepynow_x Posted January 20, 2019 Share Posted January 20, 2019 (edited) Hi guys I need some help for my sound, heres my spec: 1. Laptop Acer 4739 i3 370M 2. Alc 271x (based on codec_dump) 3. I've been trying many layout id through clover for codec alc269, but none of them worked, and when I make inject kexts=Yes in clover configuration, my layout id automatically set to 7, and I cannot changed it. By using inject kexts= yes and layout id automatically set to 7, the sound comes up after maybe around 30 minutes, then I test it, it just takes 3 secs with playing music and no sound at all 4. Yosemite 10.10.5 hope someone can help me thank you very much ioreg7.zip codec_dump.txt Edited January 20, 2019 by sleepynow_x Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted January 20, 2019 Share Posted January 20, 2019 1 hour ago, sleepynow_x said: Hi guys I need some help for my sound, heres my spec: 1. Laptop Acer 4739 i3 370M 2. Alc 271x (based on codec_dump) 3. I've been trying many layout id through clover for codec alc269, but none of them worked, and when I make inject kexts=Yes in clover configuration, my layout id automatically set to 7, and I cannot changed it. By using inject kexts= yes and layout id automatically set to 7, the sound comes up after maybe around 30 minutes, then I test it, it just takes 3 secs with playing music and no sound at all 4. Yosemite 10.10.5 hope someone can help me thank you very much ioreg7.zip codec_dump.txt Your problem is about set layout Injection for your audio. Just set it from Config.plist or DSDT Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted January 20, 2019 Share Posted January 20, 2019 9 hours ago, an3k said: Stupid me had a Headset (somewhere tucked away). As with Headphones plugging in a Headset works perfectly for Audio-Out. For Audio-In however while it changes from "Internal Microphone" to "Line-In" there is no actual audio input (tried system settings as well as voice recorder). I made sure that both the port as well as the plug are using the same layout. Try this,, post the result.. AppleALC.kext.zip Link to comment Share on other sites More sharing options...
matgeo Posted January 20, 2019 Share Posted January 20, 2019 19 hours ago, matgeo said: Layout id 11. You forgot about me or you can not find a solution? Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted January 20, 2019 Share Posted January 20, 2019 (edited) 9 minutes ago, matgeo said: You forgot about me or you can not find a solution? Because your info is not clear. You said before with 5 and 11 then you didn't get any sound from headphone, then you said again get same problem audio lost after sleep. How can you get audio lost, you didn't get any sound before sleep. I don't understand your exactly issue. Make it clear in one post with LayoutID = 11. Edited January 20, 2019 by Andres ZeroCross Link to comment Share on other sites More sharing options...
sleepynow_x Posted January 20, 2019 Share Posted January 20, 2019 56 minutes ago, Andres ZeroCross said: Your problem is about set layout Injection for your audio. Just set it from Config.plist or DSDT one more the problem, as you can see on my pic, when I set inject kext inject=Yes, I cant set layout id(alc and lilu is loaded), but if I set inject kext=Detect, I can set the layout id but in kext wizard no applealc and lilu is loaded. Is there any solution to change the layout id when inject kext is set to Yes? thank you Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted January 20, 2019 Share Posted January 20, 2019 Just now, sleepynow_x said: one more the problem, as you can see on my pic, when I set inject kext inject=Yes, I cant set layout id(alc and lilu is loaded), but if I set inject kext=Detect, I can set the layout id but in kext wizard no applealc and lilu is loaded. Is there any solution to change the layout id when inject kext is set to Yes? thank you Your configuration is BAD,,, it's the answer Link to comment Share on other sites More sharing options...
an3k Posted January 20, 2019 Share Posted January 20, 2019 1 hour ago, Andres ZeroCross said: Try this,, post the result.. AppleALC.kext.zip no Audio-Out or Input devices anymore. Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted January 20, 2019 Share Posted January 20, 2019 no Audio-Out or Input devices anymore.Makesure you didn't put wrong file AppleALC.kextSent from my Mi Note 2 using Tapatalk Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted January 20, 2019 Share Posted January 20, 2019 21 minutes ago, an3k said: no Audio-Out or Input devices anymore. Try this... AppleALC.kext.zip Link to comment Share on other sites More sharing options...
Recommended Posts