Andres ZeroCross Posted December 27, 2018 Share Posted December 27, 2018 12 minutes ago, Ravenstein said: Many thanks Andreas! It works now with the Fn-mute key to menu mute/symbol. Would you mind telling me what was the tricky change? May I ask a perfectionist question, would that be possible to use internal speaker for sound effect and external(e.g. HDMI or USB3 docking station audio) as sound output? anyway, thanks and wish U a wonderful a Christmas time... In my system i can make sound effect from USB Audio Device or Internal Speaker,, and audio output from HDMI Monitor. And it work,, Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted December 27, 2018 Share Posted December 27, 2018 48 minutes ago, Ravenstein said: Many thanks Andreas! It works now with the Fn-mute key to menu mute/symbol. Would you mind telling me what was the tricky change? May I ask a perfectionist question, would that be possible to use internal speaker for sound effect and external(e.g. HDMI or USB3 docking station audio) as sound output? anyway, thanks and wish U a wonderful a Christmas time... Can you use this kext,,, use layoutID = 21. Then please check your Internal Speaker, Jack Headphon, Internal Mic, and External Mic from Headphone. Let me know AppleALC.kext.zip Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted December 27, 2018 Share Posted December 27, 2018 4 hours ago, keplero said: Hi to everyone. I have a Soundblaster Z (CA0132). I have tried AppleALC and all ids without success. Do you have any suggestions? Motherboard: Z77 Pro4-M Codec: CA0132 (Soundblaster Z) 3=? It works all execpt audio Olarila 10.14.2 Codec-Info.command 10.zip on post #327 gives me 404 - File not found I attach a screenshot where there is a comparison between audiocodecs.txt(runme.app) and DPCImanager(PCI List+Status) Ps: ALC892 works fine with 1 ID (Now It's disabled). 1. Open terminal then type "sudo kextcache -i /" after finish save the output. 2. Save the IORegistryExplorer.app output 3. ZIP your clover folder (you can remove theme folder) ZIP all files, and upload here. Link to comment Share on other sites More sharing options...
attend Posted December 27, 2018 Share Posted December 27, 2018 6 hours ago, Andres ZeroCross said: Use this config.plist. Remove the old ones config.plist I've tried this config.plist, but still no sound... my pc details as below, hopefully there is some clue? CPU: Intel Core I7-8700 @3.2GHzMotherboard: HP 83F0BIOS: HP Q03 Ver.02.04.00Memory: 8GBGPU: Intel UHD Graphics 630 Link to comment Share on other sites More sharing options...
keplero Posted December 28, 2018 Share Posted December 28, 2018 6 hours ago, Andres ZeroCross said: 1. Open terminal then type "sudo kextcache -i /" after finish save the output. 2. Save the IORegistryExplorer.app output 3. ZIP your clover folder (you can remove theme folder) ZIP all files, and upload here. All you need in attached. report keplero.zip Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted December 28, 2018 Share Posted December 28, 2018 4 hours ago, keplero said: All you need in attached. report keplero.zip I don't see HDEF device in your IOREG, or device with same address. It's probably because you disable High Definition Audio from bios. And property for HDEF need to be modified,, i modified it for you. Do this to make your audio work 1. Remove your OLD DSDT and replace with mines. 2. Must Install Codec_Commander.kext to Library/Extensions, never put Codec Commander.kext to CLOVER/Kexts/Other or System/Library/Extensions 3. Enter your BIOS Setting, and look for HDA (High Definition Audio Options) and enable it. It MUST be there,. because your IOREG show "There is no HDEF device" Sorry for bad english DSDT.aml Link to comment Share on other sites More sharing options...
keplero Posted December 28, 2018 Share Posted December 28, 2018 (edited) 2 hours ago, Andres ZeroCross said: I don't see HDEF device in your IOREG, or device with same address. It's probably because you disable High Definition Audio from bios. And property for HDEF need to be modified,, i modified it for you. Do this to make your audio work 1. Remove your OLD DSDT and replace with mines. 2. Must Install Codec_Commander.kext to Library/Extensions, never put Codec Commander.kext to CLOVER/Kexts/Other or System/Library/Extensions 3. Enter your BIOS Setting, and look for HDA (High Definition Audio Options) and enable it. It MUST be there,. because your IOREG show "There is no HDEF device" Sorry for bad english DSDT.aml Thanks for reply. Anyway, I disabled high definition audio on purpose: ALC892 works well on MacOs but I want only ca0132(Soundblaster Z) cause It's much better. Do I have to enable in any case HDA in bios and hdas to hdef on acpi/dsdt/list of patches(clover configurator)? PS: What's EH02@1A? Edited December 28, 2018 by keplero Link to comment Share on other sites More sharing options...
Ravenstein Posted December 28, 2018 Share Posted December 28, 2018 13 hours ago, Andres ZeroCross said: Can you use this kext,,, use layoutID = 21. Then please check your Internal Speaker, Jack Headphon, Internal Mic, and External Mic from Headphone. Let me know AppleALC.kext.zip Thanks Andres! the sound card still works and Fn/mute also triggers mute. But differ audio to separate device still not. More interesting is, it seems only matters the volume +/- effect sound. i.e. setting "effect sound" to internal speaker works within the panel switching different sounds and also e.g. emptying trash can, but if use Fn=>volume+/-, the effect sound goes to external speaker! really strange. Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted December 28, 2018 Share Posted December 28, 2018 Fn volume up + down is not sound effect. Sent from my Mi Note 2 using Tapatalk 21 minutes ago, keplero said: Thanks for reply. Anyway, I disabled high definition audio on purpose: ALC892 works well on MacOs but I want only ca0132(Soundblaster Z) cause It's much better. Do I have to enable in any case HDA in bios and hdas to hdef on acpi/dsdt/list of patches(clover configurator)? PS: What's EH02@1A? Owwh,, so your CA0132 is add on AUDIO CARD?? not Built-in ones??? Link to comment Share on other sites More sharing options...
keplero Posted December 28, 2018 Share Posted December 28, 2018 Just now, Andres ZeroCross said: Fn volume up + down is not sound effect. Sent from my Mi Note 2 using Tapatalk Owwh,, so your CA0132 is add on AUDIO CARD?? not Built-in ones??? Yes. Soundblaster Z is on audio card while ALC892 is on motherboard. Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted December 28, 2018 Share Posted December 28, 2018 1 hour ago, keplero said: Yes. Soundblaster Z is on audio card while ALC892 is on motherboard. Ok,, keep disable your HDEF. I need to make a test file. 1 hour ago, keplero said: Yes. Soundblaster Z is on audio card while ALC892 is on motherboard. Use this DSDT. After that reboot, check your audio and don' forget to upload IOREG Output again DSDT.aml Link to comment Share on other sites More sharing options...
keplero Posted December 28, 2018 Share Posted December 28, 2018 28 minutes ago, Andres ZeroCross said: Ok,, keep disable your HDEF. I need to make a test file. Ok 28 minutes ago, Andres ZeroCross said: Use this DSDT. After that reboot, check your audio and don' forget to upload IOREG Output again DSDT.aml Audio still doesn't work: Do I need to change number/ID on Clover Configurator/Devices/Audio/Inject? Here you are new ioreg output. Mac mini di keplero.ioreg Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted December 28, 2018 Share Posted December 28, 2018 1 hour ago, keplero said: Ok Audio still doesn't work: Do I need to change number/ID on Clover Configurator/Devices/Audio/Inject? Here you are new ioreg output. Mac mini di keplero.ioreg Sorry,, it look won't work. It must be Onboard AUDIO. I have CA0132, but it's my onboard Audio. I try to rename your PCI Device to HDEF,, but no change. Kext won't load. Link to comment Share on other sites More sharing options...
keplero Posted December 28, 2018 Share Posted December 28, 2018 43 minutes ago, Andres ZeroCross said: Sorry,, it look won't work. It must be Onboard AUDIO. I have CA0132, but it's my onboard Audio. I try to rename your PCI Device to HDEF,, but no change. Kext won't load. Any further hope? Any further AppleALC update? Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted December 29, 2018 Share Posted December 29, 2018 17 hours ago, keplero said: Any further hope? Any further AppleALC update? TEll me if you online, i will try to make new DSDT for you. Just for test purpose Link to comment Share on other sites More sharing options...
keplero Posted December 29, 2018 Share Posted December 29, 2018 31 minutes ago, Andres ZeroCross said: TEll me if you online, i will try to make new DSDT for you. Just for test purpose Yes I am. Do you need something? Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted December 29, 2018 Share Posted December 29, 2018 38 minutes ago, keplero said: Yes I am. Do you need something? Try to use this,, reboot and upload IOREG DSDT.aml Link to comment Share on other sites More sharing options...
keplero Posted December 29, 2018 Share Posted December 29, 2018 1 hour ago, Andres ZeroCross said: Try to use this,, reboot and upload IOREG DSDT.aml After dsdt.aml change and reboot, audio doesn't work yet. I attach new ioreg. Mac mini di keplero.ioreg Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted December 29, 2018 Share Posted December 29, 2018 (edited) 1 hour ago, keplero said: After dsdt.aml change and reboot, audio doesn't work yet. I attach new ioreg. Mac mini di keplero.ioreg Now try this, don't forget to upload IOREG again DSDT.aml Edited December 29, 2018 by Andres ZeroCross Link to comment Share on other sites More sharing options...
keplero Posted December 29, 2018 Share Posted December 29, 2018 25 minutes ago, Andres ZeroCross said: Now try this, don't forget to upload IOREG again DSDT.aml Audio doesn't work. Mac mini di keplero.ioreg Link to comment Share on other sites More sharing options...
keplero Posted December 29, 2018 Share Posted December 29, 2018 19 minutes ago, keplero said: Audio doesn't work. Mac mini di keplero.ioreg It's strange the same chipset doesn't work though on pci connection. What about changing pci slot? Link to comment Share on other sites More sharing options...
suki Posted December 29, 2018 Share Posted December 29, 2018 My compiled AppleALC didn't run as expected Can someone help me find out what is wrong? I attached the work I did and attached ioreg output Is 14f120d0 a new codec ID? Audio.zip Link to comment Share on other sites More sharing options...
Mahfuz Posted December 29, 2018 Share Posted December 29, 2018 Hello, I Need assistance with adding support for AD1988A codec. My system is Lenovo Thinkstation S20 MT-M-4157-NW5. I have changed the stock Quadro 2000 with a Sapphire Pulse RX 570 4GB card. And installed a pci network card not sure what is the model. but will update the post once I find out. Dual Monitor is working. LAN is working. Now need the sound working. From reading I gather adding support for AD1988a should solve the issue. I have tried to get some data from win10 driver detail tab. Not sure if there is any relevant info in the attached txt file. I have Xcode installed so if I need to compile myself could do that too. Just not sure where to start. Any assistance will be greatly appreciated. Audio Driver.txt Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted December 29, 2018 Share Posted December 29, 2018 7 minutes ago, Mahfuz said: Hello, I Need assistance with adding support for AD1988A codec. My system is Lenovo Thinkstation S20 MT-M-4157-NW5. I have changed the stock Quadro 2000 with a Sapphire Pulse RX 570 4GB card. And installed a pci network card not sure what is the model. but will update the post once I find out. Dual Monitor is working. LAN is working. Now need the sound working. From reading I gather adding support for AD1988a should solve the issue. I have tried to get some data from win10 driver detail tab. Not sure if there is any relevant info in the attached txt file. I have Xcode installed so if I need to compile myself could do that too. Just not sure where to start. Any assistance will be greatly appreciated. Audio Driver.txt You need to upload codec_dump.txt, get it from linux 12 minutes ago, Mahfuz said: Hello, I Need assistance with adding support for AD1988A codec. My system is Lenovo Thinkstation S20 MT-M-4157-NW5. I have changed the stock Quadro 2000 with a Sapphire Pulse RX 570 4GB card. And installed a pci network card not sure what is the model. but will update the post once I find out. Dual Monitor is working. LAN is working. Now need the sound working. From reading I gather adding support for AD1988a should solve the issue. I have tried to get some data from win10 driver detail tab. Not sure if there is any relevant info in the attached txt file. I have Xcode installed so if I need to compile myself could do that too. Just not sure where to start. Any assistance will be greatly appreciated. Audio Driver.txt If you need help,, upload your Codec_dump.txt Link to comment Share on other sites More sharing options...
Mahfuz Posted December 29, 2018 Share Posted December 29, 2018 1 hour ago, Andres ZeroCross said: You need to upload codec_dump.txt, get it from linux If you need help,, upload your Codec_dump.txt Hi Andres, Thanks for looking into it. Please see attached codec dump card0_codec#2.txt I have uploaded my clover folder too just in case you needed it. CLOVER.zip This is what I see currently in my system preference/sound window. This is what I see in my hardware/audio Link to comment Share on other sites More sharing options...
Recommended Posts