Andres ZeroCross Posted December 2, 2018 Share Posted December 2, 2018 (edited) 6 minutes ago, najeeb_anwer said: I'm confused about what you want me to do. Like I said, the DSDT.aml that you provided previously works just fine to boot the system, but no audio. You provided another DSDT.aml today which does not work; system wont boot with it. Do me a favor and download the DSDT that you posted 2 hours ago and see if you can open it with MaciASL; I think it is corrupted. 1. I am confuse here in this post below you upload your current DSDT.aml,, Then now you said you said you can't boot again with same DSDT.aml. I only change Properties in HDEf,, it won't prevent your system from boot except you make change to your system after upload file. So, let clear this mess, do this1. Open terminal and type "sudo kextcache -i /", save the output2. Open IORegistryExplorer.app and save the output3. Upload your CLOVER folder4. Open DPCImanager.app and take the screenshotZIP All file into 1 file ZIPPED, and upload here Edited December 2, 2018 by Andres ZeroCross Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted December 2, 2018 Share Posted December 2, 2018 (edited) DSDT.aml Try that,, it will boot for sure,,, my bad before,, i sent DSDT.aml from luky35 above Too many files in my download folder,, Edited December 2, 2018 by Andres ZeroCross Link to comment Share on other sites More sharing options...
najeeb_anwer Posted December 2, 2018 Share Posted December 2, 2018 12 minutes ago, Andres ZeroCross said: 1. I am confuse here in this post below you upload your current DSDT.aml,, Then now you said you said you can't boot again with same DSDT.aml. I only change Properties in HDEf,, it won't prevent your system from boot except you make change to your system after upload file. So, let clear this mess, do this1. Open terminal and type "sudo kextcache -i /", save the output2. Open IORegistryExplorer.app and save the output3. Upload your CLOVER folder4. Open DPCImanager.app and take the screenshotZIP All file into 1 file ZIPPED, and upload here Archive.zip Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted December 2, 2018 Share Posted December 2, 2018 2 minutes ago, najeeb_anwer said: Archive.zip use this DSDT.aml Link to comment Share on other sites More sharing options...
najeeb_anwer Posted December 2, 2018 Share Posted December 2, 2018 19 minutes ago, Andres ZeroCross said: use this DSDT.aml Still no audio. I believe it is because of the "NULL Codec", which is causing problems for AppleHDA and causing it to exit. Anyway, it's almost 4am here and I'm going to sleep. I'll get back to this later. Thanks for your continued help on this. Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted December 2, 2018 Share Posted December 2, 2018 Still no audio. I believe it is because of the "NULL Codec", which is causing problems for AppleHDA and causing it to exit. Anyway, it's almost 4am here and I'm going to sleep. I'll get back to this later. Thanks for your continued help on this. What's your notebook model, i saw IOName 10de, this is vendor id of nvidiaSent from my Mi Note 2 using Tapatalk Link to comment Share on other sites More sharing options...
najeeb_anwer Posted December 2, 2018 Share Posted December 2, 2018 4 minutes ago, Andres ZeroCross said: What's your notebook model, i saw IOName 10de, this is vendor id of nvidia Sent from my Mi Note 2 using Tapatalk It's a Dell XPS M1340 with a NVidia motherboard chipset MCP79. It is almost identical in specs to Apple MacBookPro5,5 (2009). Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted December 2, 2018 Share Posted December 2, 2018 It's a Dell XPS M1340 with a NVidia motherboard chipset MCP79. It is almost identical in specs to Apple MacBookPro5,5 (2009).Attach ioreg before going to sleep Sent from my Mi Note 2 using Tapatalk 28 minutes ago, najeeb_anwer said: Still no audio. I believe it is because of the "NULL Codec", which is causing problems for AppleHDA and causing it to exit. Anyway, it's almost 4am here and I'm going to sleep. I'll get back to this later. Thanks for your continued help on this. I think applealc try to attach HDMI audio in HDEF,,, it's look i need to set no-controller-inject to HDEF Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted December 2, 2018 Share Posted December 2, 2018 Try to using this DSDT.aml Link to comment Share on other sites More sharing options...
najeeb_anwer Posted December 2, 2018 Share Posted December 2, 2018 10 minutes ago, Andres ZeroCross said: Attach ioreg before going to sleep Najeeb’s MacBook Pro.zip 4 minutes ago, Andres ZeroCross said: Try to using this DSDT.aml I will try it after I get some sleep Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted December 2, 2018 Share Posted December 2, 2018 2 minutes ago, najeeb_anwer said: Najeeb’s MacBook Pro.zip I uploaded DSDT.aml before,, try using it This is IOREG Output of MacbookPro5,5,, there is no HDMI Audio Code attach to HDEF,, so if my prediction is right, it because AppleALC try to attach HDMI Controller to your HDEF, because your HDEF device id is nvidia. Just try DSDT.aml uploaded above, and check your HDEF in IOREG Link to comment Share on other sites More sharing options...
insanelyDeepak Posted December 2, 2018 Share Posted December 2, 2018 2 hours ago, Andres ZeroCross said: I uploaded DSDT.aml before,, try using it This is IOREG Output of MacbookPro5,5,, there is no HDMI Audio Code attach to HDEF,, so if my prediction is right, it because AppleALC try to attach HDMI Controller to your HDEF, because your HDEF device id is nvidia. Just try DSDT.aml uploaded above, and check your HDEF in IOREG you must check you devID is supported or not ? Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted December 2, 2018 Share Posted December 2, 2018 you must check you devID is supported or not ? He said it worked before with applealc and lilu.kext, after reboot it doesn't work again. So, his device id is supported by applehda Sent from my Mi Note 2 using Tapatalk Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted December 2, 2018 Share Posted December 2, 2018 (edited) 3 hours ago, insanelyDeepak said: you must check you devID is supported or not ? And MacbookPro5,5 use same device-id of HDEF,, Edited December 2, 2018 by Andres ZeroCross Link to comment Share on other sites More sharing options...
najeeb_anwer Posted December 2, 2018 Share Posted December 2, 2018 (edited) 13 hours ago, Andres ZeroCross said: I uploaded DSDT.aml before,, try using it This is IOREG Output of MacbookPro5,5,, there is no HDMI Audio Code attach to HDEF,, so if my prediction is right, it because AppleALC try to attach HDMI Controller to your HDEF, because your HDEF device id is nvidia. Just try DSDT.aml uploaded above, and check your HDEF in IOREG I have not used the most recent DSDT.aml you provided yet. However, when I booted the system today, I did have audio. See the screenshot below. I have also attached the IOREG when the system is in this working condition; Unfortunately, I know that the audio will not be working if I reboot. Note that there is a HDMI_DPDriver in HDEF, but no NULL Codec shown in DPCIManager. Najeeb’s MacBook Pro.zip Edited December 3, 2018 by najeeb_anwer Link to comment Share on other sites More sharing options...
najeeb_anwer Posted December 3, 2018 Share Posted December 3, 2018 14 hours ago, Andres ZeroCross said: Try to using this DSDT.aml I tried this latest version of DSDT.aml that you posted. Same problem; no audio. I think the problem is IOHDACodecDevice@8,1 which contains nothing and is causing the NULL Codec listed in DPCIManager. When audio is working (occasionally), the only devices listed are IOHDACodecDevice@8,0 and IOHDACodecDevice@8,3. I don't know why IOHDACodecDevice@8,1 shows up, but it appears certain that it is causing the problem. Attached is the IOReg for this non-working condition. Najeeb’s MacBook Pro.zip Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted December 3, 2018 Share Posted December 3, 2018 I tried this latest version of DSDT.aml that you posted. Same problem; no audio. I think the problem is IOHDACodecDevice@8,1 which contains nothing and is causing the NULL Codec listed in DPCIManager. When audio is working (occasionally), the only devices listed are IOHDACodecDevice@8,0 and IOHDACodecDevice@8,3. I don't know why IOHDACodecDevice@8,1 shows up, but it appears certain that it is causing the problem. Attached is the IOReg for this non-working condition. Najeeb’s MacBook Pro.zipCan you send the IOREG OUTPUT with working audio??Sent from my Mi Note 2 using Tapatalk Link to comment Share on other sites More sharing options...
najeeb_anwer Posted December 3, 2018 Share Posted December 3, 2018 23 minutes ago, Andres ZeroCross said: Can you send the IOREG OUTPUT with working audio?? Sent from my Mi Note 2 using Tapatalk I did; see my post from 3 hours ago. 3 hours ago, najeeb_anwer said: However, when I booted the system today, I did have audio. See the screenshot below. I have also attached the IOREG when the system is in this working condition; Unfortunately, I know that the audio will not be working if I reboot. Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted December 3, 2018 Share Posted December 3, 2018 13 minutes ago, najeeb_anwer said: I did; see my post from 3 hours ago. Try to Shutdown then boot (Cold Boot) instead warm boot (restart),, check your audio again Link to comment Share on other sites More sharing options...
najeeb_anwer Posted December 3, 2018 Share Posted December 3, 2018 5 minutes ago, Andres ZeroCross said: Try to Shutdown then boot (Cold Boot) instead warm boot (restart),, check your audio again I have tried that. No luck. In fact, the only two times it has worked has been on a reboot (warm boot) from Windows 10. Link to comment Share on other sites More sharing options...
najeeb_anwer Posted December 3, 2018 Share Posted December 3, 2018 On 11/28/2018 at 8:27 PM, najeeb_anwer said: Hi all, I have macOS High Sierra 10.13.6 (17G3025) running on a Dell Studio XPS M1340 laptop. The specs are: Processor: 2.67 GHz Intel Core 2 Duo Memory: 8 GB 1333 MHz DDR3 Graphics: NVidia GeForce 9400M G 256 MB Motherboard Chipset: Nvidia MCP79 SMBIOS Product Name: MacBookPro7,1 Everthing works correctly except that: 1) I am using a modified AppleHDA.kext (for layout-id 12) with patches in config.plist and an audio kext called HDAIDT.kext, all of which are attached to this post. 2) I want to use Lilu.kext & AppleALC.kext and the codec (IDT 92HD73C1) appears to be supported with layout-id 19, but I cannot get it to work. I have tried injecting the layout id in Clover and also using Devices/Properties and by using alcid=19 at boot. None of these appear to work. 3) HDMI audio does not work. The HDMI audio device stops showing up in IOREG/HDEF if I use the HDAIDT.kext. Can someone please help me to get AppleALC.kext working instead of modifying resources in AppleHDA.kext and using HDAIDT.kext? If the currently supported layout (19) will not work, can you please add support for my layout (12) in the next release? Dell Studio XPS M1340.zip asound.zip In my original post, I included a zip file containing, among other things, the HDAIDT.kext that was working for me before I tried converting to to using Lilu/AppleALC. Maybe you could look at the Info.plist for HDAIDT.kext and see if it will give some clues about how to make this work. Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted December 3, 2018 Share Posted December 3, 2018 5 minutes ago, najeeb_anwer said: In my original post, I included a zip file containing, among other things, the HDAIDT.kext that was working for me before I tried converting to to using Lilu/AppleALC. Maybe you could look at the Info.plist for HDAIDT.kext and see if it will give some clues about how to make this work. Wait,, i rebuild AppleALC with your old data of HDAIDT, 5 minutes Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted December 3, 2018 Share Posted December 3, 2018 30 minutes ago, najeeb_anwer said: In my original post, I included a zip file containing, among other things, the HDAIDT.kext that was working for me before I tried converting to to using Lilu/AppleALC. Maybe you could look at the Info.plist for HDAIDT.kext and see if it will give some clues about how to make this work. Use this DSDT.aml and this AppleALC.kext.zip Remove the old ones, reboot and upload the IOREG Link to comment Share on other sites More sharing options...
luky35 Posted December 3, 2018 Share Posted December 3, 2018 @Andres ZeroCross hi, My audio works fine, but I see that only Internal Speakers are in the sound. If I do not know that? Link to comment Share on other sites More sharing options...
najeeb_anwer Posted December 3, 2018 Share Posted December 3, 2018 14 minutes ago, Andres ZeroCross said: Use this DSDT.aml and this AppleALC.kext.zip Remove the old ones, reboot and upload the IOREG Still no audio. IOREG is attached. Najeeb’s MacBook Pro.zip Link to comment Share on other sites More sharing options...
Recommended Posts