najeeb_anwer Posted November 30, 2018 Share Posted November 30, 2018 2 minutes ago, Andres ZeroCross said: There is nothing wrong except modified kext for msdosfs.kext, AppleKextExcludeList.kext and AppleDataSetManagement.kext. Why did you modifiy this kexts?? And You need to upload your current config.plist. Maybe another "clue" can be gathered from it Actually, I did not modify any kext except IOBluetoothFamily.kext which I needed for my Bluetooth to work. I don't know why these other kexts show invalid signature. config.plist Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted November 30, 2018 Share Posted November 30, 2018 1 minute ago, najeeb_anwer said: Actually, I did not modify any kext except IOBluetoothFamily.kext which I needed for my Bluetooth to work. I don't know why these other kexts show invalid signature. config.plist Kext will be invalid signature if you modified it. We can see it from the log. Use this config.plist,, and reboot config.plist Link to comment Share on other sites More sharing options...
najeeb_anwer Posted November 30, 2018 Share Posted November 30, 2018 17 minutes ago, Andres ZeroCross said: Kext will be invalid signature if you modified it. We can see it from the log. Use this config.plist,, and reboot config.plist Didn't work. I'm sorry but it's almost 1am here so I am going to sleep; I will contact you again tomorrow my time. In the meantime, I will try to re-install the modified CLOVER folder you sent me with the updated DSDT.aml and see if that helps. Link to comment Share on other sites More sharing options...
yehia2amer Posted November 30, 2018 Share Posted November 30, 2018 8 hours ago, Andres ZeroCross said: Use this kext and check 1. When Rear Jack + Front Jack Audio is plug in same time, then audio must be working from Headhone, and if jack front plug off then audio will be from Rear speaker (Swtichable). Check if swtichable work or not 2. Check Input,, Internal Micrphone is Front Mic Jack and Line In is Blue Port / Mic In Rear. Post the result AppleALC.kext.zip 1) Now Headphone is not working at all, I even tried to remove the Rear Jack and only connect Headphone. but it is still not working 2) Front Mic and Rear Mic are also not working ALC3220 LayoutID 21 test 5.ioreg.zip Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted November 30, 2018 Share Posted November 30, 2018 6 minutes ago, yehia2amer said: 1) Now Headphone is not working at all, I even tried to remove the Rear Jack and only connect Headphone. but it is still not working 2) Front Mic and Rear Mic are also not working ALC3220 LayoutID 21 test 5.ioreg.zip Now try this AppleALC.kext.zip Link to comment Share on other sites More sharing options...
yehia2amer Posted November 30, 2018 Share Posted November 30, 2018 (edited) 13 minutes ago, Andres ZeroCross said: Now try this AppleALC.kext.zip Now in I do have 2 options for input: Internal Microphone: this Represent Rear Jack Mic and it is working Line In: Not working Regarding the headphone, it is not working. Line Out (Rear Jack) is working normally ALC3220 LayoutID 21 test 6.ioreg.zip Edited November 30, 2018 by yehia2amer Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted November 30, 2018 Share Posted November 30, 2018 2 minutes ago, yehia2amer said: Now in I do have 2 options for input: Internal Microphone: this Represent Rear Jack Mic and it is working Line In: Not working Regarding the headphone, it is not working. Line Out (Rear Jack) is working normally ALC3220 LayoutID 21 test 6.ioreg.zip It's still same config with previous file before shalat. How can be different result.. Check it again Link to comment Share on other sites More sharing options...
yehia2amer Posted November 30, 2018 Share Posted November 30, 2018 7 minutes ago, Andres ZeroCross said: It's still same config with previous file before shalat. How can be different result.. Check it again yeah my fault again, I must remove the Line Out Jack for the Headphone to work. This makes me confused each time Link to comment Share on other sites More sharing options...
najeeb_anwer Posted November 30, 2018 Share Posted November 30, 2018 12 hours ago, Andres ZeroCross said: Kext will be invalid signature if you modified it. We can see it from the log. Use this config.plist,, and reboot config.plist I am concerned about the kexts that you say I have modified. I don't see how that is possible. For example, here is the AppleDataSetManagement.kext. All of the file modification dates are from 2015. I don't have time travel technology...yet Link to comment Share on other sites More sharing options...
najeeb_anwer Posted November 30, 2018 Share Posted November 30, 2018 12 hours ago, najeeb_anwer said: Didn't work. I'm sorry but it's almost 1am here so I am going to sleep; I will contact you again tomorrow my time. In the meantime, I will try to re-install the modified CLOVER folder you sent me with the updated DSDT.aml and see if that helps. @Andres ZeroCross I tried re-installing the CLOVER folder you sent me with the updated DSDT.aml since this worked before. I tried re-installing the latest version of Clover, just to see if that would make a difference. Did not work. Audio does not work and AppleHDA.kext does not show up in kextstat after a minute or so; presumably because there is some problem with the configuration in HDEF? AFAIK, the only changes made are: 1) Reverted AppleHDA.kext back to original Apple version. 2) Removed AppleHDA patches and Devices/Audio/Inject from config.plist. 3) Removed HDAIDT.kext from EFI/CLOVER/kexts/Other and added Lilu.kext and AppleALC.kext. 4) Replaced EFI/CLOVER/ACPI/patched/DSDT.aml with new your version. Any help to get this working would be appreciated. Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted November 30, 2018 Share Posted November 30, 2018 [mention=1311960]Andres ZeroCross[/mention] I tried re-installing the CLOVER folder you sent me with the updated DSDT.aml since this worked before. I tried re-installing the latest version of Clover, just to see if that would make a difference. Did not work. Audio does not work and AppleHDA.kext does not show up in kextstat after a minute or so; presumably because there is some problem with the configuration in HDEF? AFAIK, the only changes made are: 1) Reverted AppleHDA.kext back to original Apple version. 2) Removed AppleHDA patches and Devices/Audio/Inject from config.plist. 3) Removed HDAIDT.kext from EFI/CLOVER/kexts/Other and added Lilu.kext and AppleALC.kext. 4) Replaced EFI/CLOVER/ACPI/patched/DSDT.aml with new your version. Any help to get this working would be appreciated. Whats your os version???Sent from my Mi Note 2 using Tapatalk Link to comment Share on other sites More sharing options...
najeeb_anwer Posted November 30, 2018 Share Posted November 30, 2018 5 minutes ago, Andres ZeroCross said: Whats your os version??? Sent from my Mi Note 2 using Tapatalk macOS 10.13.6 Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted November 30, 2018 Share Posted November 30, 2018 macOS 10.13.6 Take a photo of contain file inside EFI/clover/Kexts/10.13Sent from my Mi Note 2 using Tapatalk Link to comment Share on other sites More sharing options...
najeeb_anwer Posted November 30, 2018 Share Posted November 30, 2018 4 minutes ago, Andres ZeroCross said: Take a photo of contain file inside EFI/clover/Kexts/10.13 Sent from my Mi Note 2 using Tapatalk There are no files in any of the 10.x folders. All kexts are in Other. Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted November 30, 2018 Share Posted November 30, 2018 There are no files in any of the 10.x folders. All kexts are in Other.Open DPCIManager.app, and please take a screenshot of status tab.Sent from my Mi Note 2 using Tapatalk Link to comment Share on other sites More sharing options...
najeeb_anwer Posted November 30, 2018 Share Posted November 30, 2018 4 minutes ago, Andres ZeroCross said: Open DPCIManager.app, and please take a screenshot of status tab. Sent from my Mi Note 2 using Tapatalk Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted November 30, 2018 Share Posted November 30, 2018 It's all shown. IRQ is patched well, Will check it tommorow. Maybe debug files will be usefull. Use RunMe.app dan upload the resultSent from my Mi Note 2 using Tapatalk Link to comment Share on other sites More sharing options...
najeeb_anwer Posted November 30, 2018 Share Posted November 30, 2018 41 minutes ago, Andres ZeroCross said: It's all shown. IRQ is patched well, Will check it tommorow. Maybe debug files will be usefull. Use RunMe.app dan upload the result Sent from my Mi Note 2 using Tapatalk Re: DPCIManager, why is there a NULL Codec in the list. I have not seen that before when I have used DPCIManager. Attached is the output of RunMe.app Send me Najeebs-MacBook-Pro.zip Link to comment Share on other sites More sharing options...
toleda Posted December 1, 2018 Share Posted December 1, 2018 New codec, what causes this debug message: 2018-11-29 12:57:27.295688-0800 localhost kernel[0]: (Lilu) <Lilu`lilu_os_log (kern_util.cpp:47)> AppleALC: alc @ alc-layout-id was not provided by controller at HDEF IOReg: Suggestions? Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted December 1, 2018 Share Posted December 1, 2018 4 hours ago, toleda said: New codec, what causes this debug message: 2018-11-29 12:57:27.295688-0800 localhost kernel[0]: (Lilu) <Lilu`lilu_os_log (kern_util.cpp:47)> AppleALC: alc @ alc-layout-id was not provided by controller at HDEF IOReg: Suggestions? Hmm,, i never checked debug log with debug ALC kext Link to comment Share on other sites More sharing options...
fickerr Posted December 1, 2018 Share Posted December 1, 2018 Hi, I have a Asus Zenbook UX303LA-R4343H with Conexant CX20751/2 @ Intel Broadwell PCH-LP High Definition Audio Controller. I'm running macOS Mojave 10.14.1 on it, and one of the few things that don't work currently are sound. Two questions about AppleALC: "Note: It is necessary to set value layout-id in Devices-Properties or boot arguments." 1. how do the boot arguments work? I put the kext in efi/clover/kexts/other, and put in clover configurator in the config.plist -> Boot -> Custom Flags "alcid=layout-3" or "alcid=layout_3" or ...? where do I find Device-Properties to set the value there? 2. in the supported list it says "ConexantCX20751/20752 layout 3, 28" I think layout 3 and 28 have dropped since Mojave. What do I use instead? Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted December 1, 2018 Share Posted December 1, 2018 2 minutes ago, fickerr said: Hi, I have a Asus Zenbook UX303LA-R4343H with Conexant CX20751/2 @ Intel Broadwell PCH-LP High Definition Audio Controller. I'm running macOS Mojave 10.14.1 on it, and one of the few things that don't work currently are sound. Two questions about AppleALC: "Note: It is necessary to set value layout-id in Devices-Properties or boot arguments." 1. how do the boot arguments work? I put the kext in efi/clover/kexts/other, and put in clover configurator in the config.plist -> Boot -> Custom Flags "alcid=layout-3" or "alcid=layout_3" or ...? where do I find Device-Properties to set the value there? 2. in the supported list it says "ConexantCX20751/20752 layout 3, 28" I think layout 3 and 28 have dropped since Mojave. What do I use instead? use layoutID 28 for best result.. Make sure there is no _DSM to XDSM patch in your config.plist in ACPI section. 1 Link to comment Share on other sites More sharing options...
fickerr Posted December 1, 2018 Share Posted December 1, 2018 awesome thanks! clover configurator -> Devices -> Audio -> Inject "28" and disabled _DSM to XDSM worked perfectly with Mojave Link to comment Share on other sites More sharing options...
LockDown Posted December 2, 2018 Share Posted December 2, 2018 @Andres ZeroCross let's say i want to change my working layout7 zlib file to use layout 5. which of the keys i should need to change in xml? Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted December 2, 2018 Share Posted December 2, 2018 7 minutes ago, ellaosx said: @Andres ZeroCross let's say i want to change my working layout7 zlib file to use layout 5. which of the keys i should need to change in xml? So, you want to rebuild AppleALC.kext??? Link to comment Share on other sites More sharing options...
Recommended Posts