guliano2 Posted November 23, 2018 Share Posted November 23, 2018 (edited) 2 hours ago, Andres ZeroCross said: If you use layout-id = 30 then one of your output device is not working it means about "Pinconfiguration / platform.xml of the layout". Your debug files will be useless, try to change another layoutid or upload your Codec_dump.txt Thank you for answer. But I already attached codec_dump.txt. Other layouts will not work properly. codec_dump_720s_ALC298.txt codec_dump_HDMI.txt Edited November 23, 2018 by guliano2 Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted November 23, 2018 Share Posted November 23, 2018 1 minute ago, guliano2 said: Thank you for answer. But I already attached. check iminoo-lt.zip plz. Did you tried all layoutID for ALC298???? Maybe LayoutID = 29 will be better result. Link to comment Share on other sites More sharing options...
guliano2 Posted November 23, 2018 Share Posted November 23, 2018 29 has already been tried, but the built-in speakers do not work. 4 minutes ago, Andres ZeroCross said: Did you tried all layoutID for ALC298???? Maybe LayoutID = 29 will be better result. 29 has already been tried, but the built-in speakers do not work. Link to comment Share on other sites More sharing options...
devillived666 Posted November 23, 2018 Share Posted November 23, 2018 1 hour ago, Andres ZeroCross said: It's look you use wrong version AppleALC.kext,, try to use this. Check your internal speaker and your headphone too. AppleALC.kext.zip. And remember,, to put All additional kext to EFI/CLOVER/Kexts/Other. After that reboot. Don't put to Library/Extensions or System/Library/Extensions Thank you very much. so everything in kexts/other including codec commander Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted November 23, 2018 Share Posted November 23, 2018 1 minute ago, guliano2 said: 29 has already been tried, but the built-in speakers do not work. 29 has already been tried, but the built-in speakers do not work. Can you test my AppleALC.kext configuration?? If yes,, i will try to make new configuration for Lenovo Lenovo 720S-15IKB Just now, devillived666 said: Thank you very much. so everything in kexts/other including codec commander Your audio is working or not?? Link to comment Share on other sites More sharing options...
guliano2 Posted November 23, 2018 Share Posted November 23, 2018 1 minute ago, Andres ZeroCross said: Can you test my AppleALC.kext configuration?? If yes,, i will try to make new configuration for Lenovo Lenovo 720S-15IKB Your audio is working or not?? of course. I will test it soon. Link to comment Share on other sites More sharing options...
devillived666 Posted November 23, 2018 Share Posted November 23, 2018 (edited) 27 minutes ago, Andres ZeroCross said: Can you test my AppleALC.kext configuration?? If yes,, i will try to make new configuration for Lenovo Lenovo 720S-15IKB Your audio is working or not?? Just tested . Just slider and no sound . Side note: If I add hdef patch from other asus , I get input on mic but no sound out. I got ri of that patch and have everything as it was when I originally asked you for help so as to avoid confusion. Thanks for your help, sir. I will donate this weekend. I greatly appreciate your help and patience. Send me Denniss-MacBook-Pro.zip Edited November 23, 2018 by devillived666 Link to comment Share on other sites More sharing options...
devillived666 Posted November 23, 2018 Share Posted November 23, 2018 36 minutes ago, Andres ZeroCross said: Can you test my AppleALC.kext configuration?? If yes,, i will try to make new configuration for Lenovo Lenovo 720S-15IKB Your audio is working or not?? Okay, weird. I plugged headphones in and I do get audio through headphones!!!! Just not through speakers Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted November 23, 2018 Share Posted November 23, 2018 36 minutes ago, guliano2 said: of course. I will test it soon. Please try this,, use layoutid = 21. After that reboot and upload IOREG Output. I am waiting AppleALC.kext.zip Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted November 23, 2018 Share Posted November 23, 2018 7 minutes ago, devillived666 said: Okay, weird. I plugged headphones in and I do get audio through headphones!!!! Just not through speakers Try to remove your CodecCommander.kext then reboot Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted November 23, 2018 Share Posted November 23, 2018 41 minutes ago, devillived666 said: Okay, weird. I plugged headphones in and I do get audio through headphones!!!! Just not through speakers Tried this,, still use layoutid=21 and reboot,, check the result AppleALC.kext.zip Link to comment Share on other sites More sharing options...
devillived666 Posted November 23, 2018 Share Posted November 23, 2018 6 minutes ago, Andres ZeroCross said: Tried this,, still use layoutid=21 and reboot,, check the result AppleALC.kext.zip Okay. tried without codec commander with the kext before this and still nothing. I will try this new one. Thanks again, sir. I appreciate the help and hard work. I will report back asap. Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted November 23, 2018 Share Posted November 23, 2018 1 minute ago, devillived666 said: Okay. tried without codec commander with the kext before this and still nothing. I will try this new one. Thanks again, sir. I appreciate the help and hard work. I will report back asap. You and @Justin Spier use same codec and version,, when i take a look in your both codec_dump.txt, it's look similar. How this can be. @Justin Spier use my cx8150 configuration and work well. Link to comment Share on other sites More sharing options...
devillived666 Posted November 23, 2018 Share Posted November 23, 2018 (edited) 14 minutes ago, Andres ZeroCross said: You and @Justin Spier use same codec and version,, when i take a look in your both codec_dump.txt, it's look similar. How this can be. @Justin Spier use my cx8150 configuration and work well. I wish I knew. I think my config.plist is set up correctly. I used rehabmans generic config.plist for intel hd620 and only edited to support battery. I get auto switching , headphones(no mic) , hdmi audio out, and slider but no internal speakers using your ALC kext. I am attaching results with codeccommander and without. I am assuming clover hotpatching still works for mojave ? I dont understand either and I wish conexant wasn't so difficult. As @Justin Spier said, the new vivobooks are a pain. I really appreciate the help, sir. let me know if there is anything I can try to do . It is so close to working. I might not reply for a bit because I have work soon. I greatly appreciate your diligence and hardwork. withcodecommander.zip withoutcodeccommander.zip Edited November 23, 2018 by devillived666 Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted November 23, 2018 Share Posted November 23, 2018 I wish I knew. I think my config.plist is set up correctly. I used rehabmans generic config.plist for intel hd620 and only edited to support battery. I get auto switching , headphones(no mic) , hdmi audio out, and slider but no internal speakers using your ALC kext. I am attaching results with codeccommander and without. I am assuming clover hotpatching still works for mojave ? I dont understand either and I wish conexant wasn't so difficult. As [mention=2450785]Justin Spier[/mention] said, the new vivobooks are a pain. I really appreciate the help, sir. let me know if there is anything I can try to do . It is so close to working. I might not reply for a bit because I have work soon. I greatly appreciate your diligence and hardwork. withcodecommander.zipwithoutcodeccommander.zipLet try it when you can fast responseSent from my Mi Note 2 using Tapatalk Link to comment Share on other sites More sharing options...
devillived666 Posted November 23, 2018 Share Posted November 23, 2018 46 minutes ago, Andres ZeroCross said: Let try it when you can fast response Sent from my Mi Note 2 using Tapatalk Hello sir, That's the one I tried in my previous response. I attached "send me" results both with and without codec commander . I only installed kexts in EFI>Clover>Kexts>Other as you said. Could it perhaps be my config.plist isn't setup correctly? Thanks so much for your help . Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted November 23, 2018 Share Posted November 23, 2018 Hello sir, That's the one I tried in my previous response. I attached "send me" results both with and without codec commander . I only installed kexts in EFI>Clover>Kexts>Other as you said. Could it perhaps be my config.plist isn't setup correctly? Thanks so much for your help . You said you will work, so let do it when you are free and can make fast response.Sent from my Mi Note 2 using Tapatalk Link to comment Share on other sites More sharing options...
devillived666 Posted November 23, 2018 Share Posted November 23, 2018 3 minutes ago, Andres ZeroCross said: You said you will work, so let do it when you are free and can make fast response. Sent from my Mi Note 2 using Tapatalk Okay sir. Thanks a lot. Cheers! Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted November 23, 2018 Share Posted November 23, 2018 of course. I will test it soon.How about it???Sent from my Mi Note 2 using Tapatalk Link to comment Share on other sites More sharing options...
devillived666 Posted November 23, 2018 Share Posted November 23, 2018 6 hours ago, Andres ZeroCross said: You said you will work, so let do it when you are free and can make fast response. Sent from my Mi Note 2 using Tapatalk Putting this here for reference. I just got back from work. http://www.alsa-project.org/db/?f=df6aaf9726d40e296ed109d496e1525adb35d6d7 Link to comment Share on other sites More sharing options...
devillived666 Posted November 23, 2018 Share Posted November 23, 2018 11 hours ago, Andres ZeroCross said: You said you will work, so let do it when you are free and can make fast response. Sent from my Mi Note 2 using Tapatalk Tested last alc given me. I have added some kextpatches that didnt seem to take. Only seem to have headphone output still.send.me However, if I add this conexant patch that I found here(also attached)https://github.com/tctien342/Asus-Vivobook-S510UA-High-Sierra-10.13-Hackintosh it activates microphone(both built-in and headphones mic). Not sure how. Thanks so much sir. I have to sleep because its midnight here but I will check back tomorrow evening , my time. Thanks again and have a great weekend. Dennis's MacBook-sendme.zip SSDT-CONXEANT-FIX.aml Link to comment Share on other sites More sharing options...
guliano2 Posted November 24, 2018 Share Posted November 24, 2018 17 hours ago, Andres ZeroCross said: Please try this,, use layoutid = 21. After that reboot and upload IOREG Output. I am waiting AppleALC.kext.zip I tested it with layout-id 21, but it's marked as 'unknown'. The microphone and line in jack works well and the headphones are very noisy. layout-id_21.ioreg.zip Link to comment Share on other sites More sharing options...
devillived666 Posted November 24, 2018 Share Posted November 24, 2018 5 hours ago, guliano2 said: I tested it with layout-id 21, but it's marked as 'unknown'. The microphone and line in jack works well and the headphones are very noisy. layout-id_21.ioreg.zip What is your codec? Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted November 24, 2018 Share Posted November 24, 2018 5 hours ago, guliano2 said: I tested it with layout-id 21, but it's marked as 'unknown'. The microphone and line in jack works well and the headphones are very noisy. layout-id_21.ioreg.zip You take so long to response,, i have deleted all the files to patch your codec. I think you won't reply this discussion again. Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted November 24, 2018 Share Posted November 24, 2018 (edited) 8 hours ago, guliano2 said: I tested it with layout-id 21, but it's marked as 'unknown'. The microphone and line in jack works well and the headphones are very noisy. layout-id_21.ioreg.zip Try this,, still use LayoutID = 21. And post the result AppleALC.kext.zip Edited November 24, 2018 by Andres ZeroCross Fixing NODE ID 1 Link to comment Share on other sites More sharing options...
Recommended Posts