AppleALC — dynamic AppleHDA patching

[ammoune78]

5 hours ago, Shaneee said:

There's been a couple reports of it working with the Ryzen chip so thought I'd give it a go... Seems like the codec ID just needs added.

If you look on the IORegistryExplorer, you will find that Device HDEF have Vendor ID: 1022 AMD instead of 8086 INTEL, you can try the Fake ID 0xxxxx8086 ALC1220 for HDEF on clover, and see whats the result!

[Dr. Hurt]

FWIW, this is what codec commander says during boot on my system: (ALC269 layout-id=6)

CodecCommander: Node ID 0x14 supports EAPD, will update state after sleep.
CodecCommander: Node ID 0x15 supports EAPD, will update state after sleep.

Is there a particular WakeConfigData I need to specify to get sound after wake?

Hope to eventually be able to get rid of CodecCommander. Willing to provide any extra debug info needed to implement this functionality into AppleALC. 

[MacPeet]

@Shaneee

Unfortunately, I'm not the hardware or device expert.
Presumably, vit9696 can tell more why AMD devices are not working.
Maybe it's somehow FakeID's or FakeSubID's. No idea.
So far it has never worked with AMD.
Many problems on AMD. AppleHPET and AppleLPC is not loaded. Also often important for sound.

This is an example of a laptop with ALC1220 I am currently working on with ID13:

Your devices:

try this:

The nodes of the VoodooDump are not much different to the other LayoutID's.
You can try with 15 (0F). But I do not have much hope.

trial_ryzen_layoutID15 (0F).zip

Edited April 13, 2018 by MacPeet

[xelanaiznac]

hi guys. here you are the applealc with the patch for Nvidia pascal 1070.

 

 

AppleALC.kext.zip

[Shaneee]

4 hours ago, MacPeet said:

@Shaneee

Unfortunately, I'm not the hardware or device expert.
Presumably, vit9696 can tell more why AMD devices are not working.
Maybe it's somehow FakeID's or FakeSubID's. No idea.
So far it has never worked with AMD.
Many problems on AMD. AppleHPET and AppleLPC is not loaded. Also often important for sound.

This is an example of a laptop with ALC1220 I am currently working on with ID13:

Your devices:

try this:

The nodes of the VoodooDump are not much different to the other LayoutID's.
You can try with 15 (0F). But I do not have much hope.

trial_ryzen_layoutID15 (0F).zip

Well the kext patch allowed the AppleHDAController to load onto HDEF. I'll try the layout later after work. Thanks for helping.

[wern apfel]

6 hours ago, Dr. Hurt said:

FWIW, this is what codec commander says during boot on my system: (ALC269 layout-id=6)

CodecCommander: Node ID 0x14 supports EAPD, will update state after sleep.
CodecCommander: Node ID 0x15 supports EAPD, will update state after sleep.

Is there a particular WakeConfigData I need to specify to get sound after wake?

Hope to eventually be able to get rid of CodecCommander. Willing to provide any extra debug info needed to implement this functionality into AppleALC. 

CodecCommander does not just send the EAPD bit, if you look at the codec profile in the plist, it also set an unsolicited enable bit. Not sure if this is required for your codec, but you can remove the ALC269 profile an see if it still works. If so, the AppleALC WakeVerbReinit should be enough.

[WeBeRiO]

Hola, gracias por el trabajo perfecto, este kext y tu.

Mi GTX980 no muestra el sonido HDMI en Preferencias.

Tengo la versión 1.2.5 y no funciona esto: /

Se agregó parche NVIDIA HDMI para GM204 para 10.13.4+

Edit:

Edited April 13, 2018 by WeBeRiO

[Shaneee]

@MacPeet That layout didn't change it. With the AppleHDAController patch though it's at least starting to load on HDEF. AppleHDA is showing as loaded without doing anything. Even before the AZAL to HDEF patch in Clover. I feel like it's almost there. 

 

[Dr. Hurt]

6 hours ago, wern apfel said:

CodecCommander does not just send the EAPD bit, if you look at the codec profile in the plist, it also set an unsolicited enable bit. Not sure if this is required for your codec, but you can remove the ALC269 profile an see if it still works. If so, the AppleALC WakeVerbReinit should be enough.

Hopefully then AppleALC implements sending this unsolicited bit on boot and wake like Codec Commander.

[ammoune78]

1 hour ago, Shaneee said:

@MacPeet That layout didn't change it. With the AppleHDAController patch though it's at least starting to load on HDEF. AppleHDA is showing as loaded without doing anything. Even before the AZAL to HDEF patch in Clover. I feel like it's almost there. 

 

The Vendor ID is still the defaults one. i suggest you to do it in clover Fake ID and use the files given from MacPeet.

If you can do the folowing:

+ _DSM with exact IDs given from MacPeet IORegistryExplorer to insert in HDEF, i mean Vendor ID, Subsystem Vendor ID, SubSystem ID and Device ID with compatible pci8086.xxxx from real Mac machine in your case MacPro 6.1

+ Fake ID in Clover config.plist

By the way why not using iMacPro

Edited April 13, 2018 by ammoune78

[Shaneee]

@ammoune78 Could you help with that? DSDT isn't my strong suit. Also which ID do I fake in Clover? Didn't think it had one for Audio. Attached my untouched DSDT from Clover F4.

DSDT.aml.zip

[ammoune78]

 switched from Horrible windows to macOS, OK will post it

[ammoune78]

DSDT.aml.zip

41 minutes ago, Shaneee said:

@ammoune78 Didn't think it had one for Audio

I apologize  

[SavageAUS]

Unsure if this is the issue above but if i remove codeccommander i lose all audio except HDMI, i can still see the devices but i have no audio. Would be great to eliminate an extra kext.

ALC1150

AppleALC 1.2.6

Lilu 1.2.3

ioreg attached.

Anything else i need to provide to help this issue?

Shane’s iMac.zip

Edited April 14, 2018 by SavageAUS

[spectra]

Hey  @vandroiy2012

I have a codec new for MSI Ge62-7re Apache pro.

ALC898 - LayoutID 98 for MSI ge62-7re Apache pro

Resources Alc898 Msi ge62 7re.zip

Everything is working, including all the internal speakers and subwoofer.
Can you please add the new codec?

Thank you 

[LockDown]

What is now the minimum OS build requirement for AppleALC?

[ammoune78]

What is now the minimum OS build requirement for AppleALC?

In the readme file, look http:// https://github.com/vit9696/AppleALC/blob/master/README.md


Sent from my iPhone using Tapatalk

[vit9696]

Lilu and AppleALC both target Mountain Lion (10.8) and higher (as well as all the prebuilt binaries on github releases).

When it comes to compiling, you will need a compiler with C++14 support. Normally Lilu and AppleALC would compile on Mavericks and newer, since clang from Xcode 5.1.1 does not fully support c++14. However, I made some changes to Lilu and AppleALC (other kexts may follow) to let the buildsystem use the preliminary C++14 support on Mountain Lion's Xcode as well.

However, you should really avoid compiling with old Xcode if you could, as its bundled compiler is less reliable and may provide less optimised code.

[Shaneee]

16 hours ago, ammoune78 said:

DSDT.aml.zip

I apologize  

Thanks but it didn't help. Unless a dev can help I guess I'll have to stick with VoodooHDA

[kali2000]

Hi my friends...

I recently upgraded my laptop to High Sierra from Yosemite.

I´m testing AppleALC for my Laptop and I can´t get properly work from this kext. 

I have ALC269VB

I upload my CodecDrump.

Can anyone help me?

Thanks in advance.

CodecDump.zip

[9000RPM]

I am having an issue with my GE60 0ND. DPCIManager reports my laptop with ALC892.  I already have Lilu and AppleALC in my clover other kext folder.  I've tried all the layouts listed for 892 but nothing works.  AppleHDA is stock and change HDAS to HDEF patach applied in ACPI>DSDT>Patch. VoodooHDA works but it splits my 4 speakers into 2 separate outputs with 2 speakers on each output, making only 2 speakers work at any given time. I would much rather use AppleALC and see if it fixes the problem. 

 

Below is what's reported in DPCIManager.

Audio Devie,  Sub Device,    Codec ID,   Revision,   Codec name:

0x80861E20, 0x146210C7, 0x10EC0892, 0x0302, Realtek ALC892

 

https://drive.google.com/open?id=1K3-ayWOidKNKrZvzTdaf8GAgiufLUbKL

Edited April 20, 2018 by 9000RPM

[MegaCookie]

On 4/11/2018 at 10:21 AM, MacPeet said:

@MegaCookie

Not good enough for the release.

Still a few attempts. 5 and 6 ManualMode, 7 SwitchMode

trial5_ALC1220_for_Clevo_P950HR_LayoutID13.zip

trial6_ALC1220_for_Clevo_P950HR_LayoutID13.zip

trial7_ALC1220_for_Clevo_P950HR_LayoutID13.zip

Hi MacPeet, sorry for replying that late. 

 

Here are my test results:

Trial 5: Only ‘Internal Speakers’ are working on the ‘Internal Speakers’ mode. Headphones are not working.

Trial 6: Just like the previous attempts, speakers and headphones are both working on the ‘Headphone’ mode.

Trial 7: This  switch mode, shows 'Headphones' when headphones are attached, and ‘Internal speakers’ when  sound is playing over the internal speakers. So this is actually working! The only thing is that the headphone port constantly is is red, even when no data is emitted.

Edited April 20, 2018 by MegaCookie

[MacPeet]

@MegaCookie

red? LED indicator light?

Version 7 but almost perfect for AppleALC release?
 

Ok, last attempts for red problem:
 

trial 7 PinConfig had EAPD 2 on speakers and headphones

01471C10 01471D10 01471E21 01471F01 01470C02 01271C30 01271D00 01271EA6 01271F99 01871C40 01871D10 01871E81 01871F01 01B71C60 01B71D00 01B71E17 01B71F99 01B70C02 01E71C70 01E71D10 01E71E44 01E71F01

 

try this:

Trial 8 EAPD speaker only

trial8_ALC1220_for_Clevo_P950HR_LayoutID13.zip

Trial 9 EAPD headphones only

trial9_ALC1220_for_Clevo_P950HR_LayoutID13.zip

[MegaCookie]

6 hours ago, MacPeet said:

@MegaCookie

red? LED indicator light?

Version 7 but almost perfect for AppleALC release?
 

Ok, last attempts for red problem:
 

trial 7 PinConfig had EAPD 2 on speakers and headphones

01471C10 01471D10 01471E21 01471F01 01470C02 01271C30 01271D00 01271EA6 01271F99 01871C40 01871D10 01871E81 01871F01 01B71C60 01B71D00 01B71E17 01B71F99 01B70C02 01E71C70 01E71D10 01E71E44 01E71F01

 

try this:

Trial 8 EAPD speaker only

trial8_ALC1220_for_Clevo_P950HR_LayoutID13.zip

Trial 9 EAPD headphones only

trial9_ALC1220_for_Clevo_P950HR_LayoutID13.zip

Unfortunately both trials had the same red led on inside the headphone port, sound was still working right as expected.

 

[Babiloe]

New built here:

Notebook Asus X550VX i7 - 7700hq

with ALC255

not working with layout id  3, 13, 17, 18, 27, 28, 99

mic works others not..

 

codec dump linux

https://drive.google.com/file/d/1pg2y76WvFYsO8vFY-2B_2OLyKMmkQ8Tg/view

 

Do i edit config.plist right? here the debug fuke

https://drive.google.com/file/d/1k6v8cWpxqNcWjsvGY4-h1jhAvkikuNcS/view

 

latest debug

http://www.mediafire.com/file/2pjny4eq5r64ed8/debug_1383 (1).zip

 

clover and kext

https://drive.google.com/open?id=1n5rHIw-jDPCgocWJtZ0AoVlqIi6Xc7XL

Edited April 23, 2018 by Babiloe