AppleALC — dynamic AppleHDA patching

magnificentflamingo · November 19, 2017

AAAaaa no excuse me it was FakeSMC, i forgot to add it in the kext folder, here's the last RehabMan-Kozlek-FakeSMC 2017/10/17_Huronriver-2.41f1, put it on my clover folder and reboot, the AppleALC is the last from vit9696 repos Lillu also.

FakeSMC-Huronriver 2.41f1.zip

The FakeSMC kexts did the job and got me to boot in MacOS.

Headphones and Internal Speakers still working through auto-switching, cannot manual switch between the two.

Also hearing crackling sounds and random volume pops with your clover folder, but I think it's more related to the new AppleALC version since I heard the same thing updating on my original folder? Maybe it affects ALC1220 users?

ammoune78 · November 19, 2017

I think that you have to go to the repos again, and now just see in the ALC1220 folder how many Layout ID's it offers, use them one by one to see if there will be any good change, posting the verbose boot will help to find the trick!

Sent from ammoune78's iPhone using Tapatalk

magnificentflamingo · November 19, 2017

Is something like the attached the verbose boot you are looking for? Or is there some extra config I need add?

Or do you need something like this log from AppleALC debug? (Replaced binary with debug version to do this)

2017-11-19 14:03:20.340480+0100  localhost kernel[0]: (kernel) AppleALC:   iokit @ (DBG) getOSData vendor-id has 10DE value
2017-11-19 14:03:20.340484+0100  localhost kernel[0]: (kernel) AppleALC:   iokit @ (DBG) getOSData device-id has 10F0 value
2017-11-19 14:03:20.340487+0100  localhost kernel[0]: (kernel) AppleALC:   iokit @ (DBG) getOSData revision-id has A1 value
2017-11-19 14:03:20.340492+0100  localhost kernel[0]: (kernel) AppleALC:   iokit @ (DBG) getOSData AAPL,ig-platform-id was not found
2017-11-19 14:03:20.340496+0100  localhost kernel[0]: (kernel) AppleALC:   iokit @ (DBG) getOSData AAPL,snb-platform-id was not found
2017-11-19 14:03:20.340536+0100  localhost kernel[0]: (kernel) AppleALC:   iokit @ (DBG) getOSData vendor-id has 8086 value
2017-11-19 14:03:20.340540+0100  localhost kernel[0]: (kernel) AppleALC:   iokit @ (DBG) getOSData device-id has A2F0 value
2017-11-19 14:03:20.340543+0100  localhost kernel[0]: (kernel) AppleALC:   iokit @ (DBG) getOSData revision-id has 0 value
2017-11-19 14:03:20.340546+0100  localhost kernel[0]: (kernel) AppleALC:   iokit @ (DBG) getOSData layout-id has 1 value
2017-11-19 14:03:20.340549+0100  localhost kernel[0]: (kernel) AppleALC:   iokit @ (DBG) getOSData AAPL,ig-platform-id was not found
2017-11-19 14:03:20.340553+0100  localhost kernel[0]: (kernel) AppleALC:   iokit @ (DBG) getOSData AAPL,snb-platform-id was not found
2017-11-19 14:03:20.340569+0100  localhost kernel[0]: (kernel) AppleALC:   iokit @ (DBG) getOSData vendor-id has 8086 value
2017-11-19 14:03:20.340573+0100  localhost kernel[0]: (kernel) AppleALC:   iokit @ (DBG) getOSData device-id has A2F0 value
2017-11-19 14:03:20.340575+0100  localhost kernel[0]: (kernel) AppleALC:   iokit @ (DBG) getOSData revision-id has 0 value
2017-11-19 14:03:20.340578+0100  localhost kernel[0]: (kernel) AppleALC:   iokit @ (DBG) getOSData layout-id has 1 value
2017-11-19 14:03:20.340581+0100  localhost kernel[0]: (kernel) AppleALC:   iokit @ (DBG) getOSData AAPL,ig-platform-id was not found
2017-11-19 14:03:20.340584+0100  localhost kernel[0]: (kernel) AppleALC:   iokit @ (DBG) getOSData AAPL,snb-platform-id was not found
2017-11-19 14:03:20.340586+0100  localhost kernel[0]: (kernel) AppleALC:     alc @ (DBG) found 3 audio controllers
2017-11-19 14:03:20.340589+0100  localhost kernel[0]: (kernel) AppleALC:     alc @ (DBG) validating 0 controller 10DE:10F0:A1
2017-11-19 14:03:20.340591+0100  localhost kernel[0]: (kernel) AppleALC:     alc @ (DBG) comparing to 0 mod 8086:A2F0
2017-11-19 14:03:20.340593+0100  localhost kernel[0]: (kernel) AppleALC:     alc @ (DBG) comparing to 1 mod 8086:A171
2017-11-19 14:03:20.340596+0100  localhost kernel[0]: (kernel) AppleALC:     alc @ (DBG) comparing to 2 mod 8086:8D21
2017-11-19 14:03:20.340598+0100  localhost kernel[0]: (kernel) AppleALC:     alc @ (DBG) comparing to 3 mod 8086:8D20
2017-11-19 14:03:20.340600+0100  localhost kernel[0]: (kernel) AppleALC:     alc @ (DBG) comparing to 4 mod 8086:F04
2017-11-19 14:03:20.340602+0100  localhost kernel[0]: (kernel) AppleALC:     alc @ (DBG) comparing to 5 mod 8086:24
2017-11-19 14:03:20.340604+0100  localhost kernel[0]: (kernel) AppleALC:     alc @ (DBG) comparing to 6 mod 8086:C0C
2017-11-19 14:03:20.340606+0100  localhost kernel[0]: (kernel) AppleALC:     alc @ (DBG) comparing to 7 mod 8086:8D20
2017-11-19 14:03:20.340608+0100  localhost kernel[0]: (kernel) AppleALC:     alc @ (DBG) comparing to 8 mod 8086:412
2017-11-19 14:03:20.340610+0100  localhost kernel[0]: (kernel) AppleALC:     alc @ (DBG) comparing to 9 mod 8086:1616
2017-11-19 14:03:20.340612+0100  localhost kernel[0]: (kernel) AppleALC:     alc @ (DBG) comparing to 10 mod 8086:1612
2017-11-19 14:03:20.340614+0100  localhost kernel[0]: (kernel) AppleALC:     alc @ (DBG) comparing to 11 mod 8086:1626
2017-11-19 14:03:20.340616+0100  localhost kernel[0]: (kernel) AppleALC:     alc @ (DBG) comparing to 12 mod 8086:191E
2017-11-19 14:03:20.340618+0100  localhost kernel[0]: (kernel) AppleALC:     alc @ (DBG) comparing to 13 mod 8086:1916
2017-11-19 14:03:20.340623+0100  localhost kernel[0]: (kernel) AppleALC:     alc @ (DBG) comparing to 14 mod 8086:191B
2017-11-19 14:03:20.340625+0100  localhost kernel[0]: (kernel) AppleALC:     alc @ (DBG) comparing to 15 mod 8086:191B
2017-11-19 14:03:20.340627+0100  localhost kernel[0]: (kernel) AppleALC:     alc @ (DBG) comparing to 16 mod 8086:1912
2017-11-19 14:03:20.340629+0100  localhost kernel[0]: (kernel) AppleALC:     alc @ (DBG) comparing to 17 mod 8086:5912
2017-11-19 14:03:20.340631+0100  localhost kernel[0]: (kernel) AppleALC:     alc @ (DBG) comparing to 18 mod 8086:166
2017-11-19 14:03:20.340633+0100  localhost kernel[0]: (kernel) AppleALC:     alc @ (DBG) comparing to 19 mod 8086:166
2017-11-19 14:03:20.340635+0100  localhost kernel[0]: (kernel) AppleALC:     alc @ (DBG) comparing to 20 mod 8086:166
2017-11-19 14:03:20.340637+0100  localhost kernel[0]: (kernel) AppleALC:     alc @ (DBG) comparing to 21 mod 1002:AAC8
2017-11-19 14:03:20.340639+0100  localhost kernel[0]: (kernel) AppleALC:     alc @ (DBG) validating 1 controller 8086:A2F0:0
2017-11-19 14:03:20.340642+0100  localhost kernel[0]: (kernel) AppleALC:     alc @ (DBG) comparing to 0 mod 8086:A2F0
2017-11-19 14:03:20.340644+0100  localhost kernel[0]: (kernel) AppleALC:     alc @ (DBG) found mod for 1 controller
2017-11-19 14:03:20.340646+0100  localhost kernel[0]: (kernel) AppleALC:     alc @ (DBG) validating 2 controller 8086:A2F0:0
2017-11-19 14:03:20.340648+0100  localhost kernel[0]: (kernel) AppleALC:     alc @ (DBG) comparing to 0 mod 8086:A2F0
2017-11-19 14:03:20.340650+0100  localhost kernel[0]: (kernel) AppleALC:     alc @ (DBG) found mod for 2 controller
2017-11-19 14:03:20.340652+0100  localhost kernel[0]: (kernel) AppleALC:     alc @ (DBG) missing ControllerModInfo for 0 controller
2017-11-19 14:03:20.340654+0100  localhost kernel[0]: (kernel) AppleALC:     alc @ (DBG) applying patches for 1 kext
2017-11-19 14:03:20.340656+0100  localhost kernel[0]: (kernel) AppleALC:     alc @ (DBG) applying 0 patch for 1 kext
2017-11-19 14:03:20.340739+0100  localhost kernel[0]: (kernel) AppleALC:     alc @ (DBG) applying patches for 1 kext
2017-11-19 14:03:20.340741+0100  localhost kernel[0]: (kernel) AppleALC:     alc @ (DBG) applying 0 patch for 1 kext
2017-11-19 14:03:20.368174+0100  localhost kernel[0]: (kernel) AppleALC:     alc @ (DBG) found supported Realtek ALC1220 codec revision 0x100003
2017-11-19 14:03:20.368179+0100  localhost kernel[0]: (kernel) AppleALC:     alc @ (DBG) missing ControllerModInfo for 0 controller
2017-11-19 14:03:20.368182+0100  localhost kernel[0]: (kernel) AppleALC:     alc @ (DBG) applying patches for 3 kext
2017-11-19 14:03:20.368184+0100  localhost kernel[0]: (kernel) AppleALC:     alc @ (DBG) applying patches for 3 kext
2017-11-19 14:03:20.368187+0100  localhost kernel[0]: (kernel) AppleALC:     alc @ (DBG) will route callbacks resource loading callbacks
2017-11-19 14:03:20.368190+0100  localhost kernel[0]: (kernel) AppleALC:     alc @ (DBG) applying patches for 3 kext
2017-11-19 14:03:20.368193+0100  localhost kernel[0]: (kernel) AppleALC:     alc @ (DBG) applying 1 patch for 3 kext
2017-11-19 14:03:20.368401+0100  localhost kernel[0]: (kernel) AppleALC:     alc @ (DBG) applying 2 patch for 3 kext
2017-11-19 14:03:20.368547+0100  localhost kernel[0]: (kernel) AppleALC:     alc @ (DBG) applying 3 patch for 3 kext
2017-11-19 14:03:20.369223+0100  localhost kernel[0]: (kernel) AppleALC:     alc @ (DBG) applying 5 patch for 3 kext
2017-11-19 14:03:20.369903+0100  localhost kernel[0]: (kernel) AppleALC:     alc @ (DBG) layout call 55 48 89 E5 41 57 41 56 41 54 53 41 89 CE 49 89
2017-11-19 14:03:20.369913+0100  localhost kernel[0]: (kernel) AppleALC:     alc @ (DBG) platform call 55 48 89 E5 41 57 41 56 41 54 53 41 89 CE 49 89
2017-11-19 14:03:21.126570+0100  localhost kernel[0]: (kernel) AppleALC:     alc @ (DBG) resource-request arrived layout
2017-11-19 14:03:21.126574+0100  localhost kernel[0]: (kernel) AppleALC:     alc @ (DBG) checking codec 10EC:1220:100003
2017-11-19 14:03:21.126578+0100  localhost kernel[0]: (kernel) AppleALC:     alc @ (DBG) selecting from 5 files
2017-11-19 14:03:21.126581+0100  localhost kernel[0]: (kernel) AppleALC:     alc @ (DBG) comparing 0 layout 1/1
2017-11-19 14:03:21.126585+0100  localhost kernel[0]: (kernel) AppleALC:     alc @ (DBG) found layout at 0 index
2017-11-19 14:03:21.140899+0100  localhost kernel[0]: (kernel) AppleALC:     alc @ (DBG) resource-request arrived platform
2017-11-19 14:03:21.140905+0100  localhost kernel[0]: (kernel) AppleALC:     alc @ (DBG) checking codec 10EC:1220:100003
2017-11-19 14:03:21.140909+0100  localhost kernel[0]: (kernel) AppleALC:     alc @ (DBG) selecting from 5 files
2017-11-19 14:03:21.140912+0100  localhost kernel[0]: (kernel) AppleALC:     alc @ (DBG) comparing 0 layout 1/1
2017-11-19 14:03:21.140915+0100  localhost kernel[0]: (kernel) AppleALC:     alc @ (DBG) found platform at 0 index

bootlog.log.txt

wern apfel · November 19, 2017

Sorry for pinging again just want to see if there's anyone who's managed to achieve manual speaker/headphone selection for ALC1220. Layout 11 with AppleALC works brilliantly but would like to remove the auto sense.

You can try this little applet, it should work with the most realtek codecs. ALCAudioSwitcher.zip

If you prefer to use the Apple menu, I can make an new layout for you.

toleda · November 19, 2017

want to see if there's anyone who's managed to achieve manual speaker/headphone selection for ALC1220.

Following procedure applies to 1220/PlatformsT.xml.zlib/PathMapID: 900 (layout 1):

3. Manual Internal Speaker and Headphone Selection - Displays both Internal Speaker and Headphones audio output devices. Note: An existing audio output device must be deleted to add Headphones as an audio output device.

Edit Platforms.xml/zml
1. Open Item/PathMapID
2. Verify PathMapID
3. Copy the current speaker/headphone (Item 2)
4. Paste the current speaker/headphone so there are two of the same (Item 0 and 3)
5. Drag Item 2 up to PathMap - 2 times (moves new item to correct position)
6. In Item 2, open next level and there are Item 0 and Item 1; delete Item 1 (headphones).
7. In Item 3, open next level and there are Item 0 and Item 1; delete Item 0 (speakers).
8. Edit this path map as follows:
  - Current
    - Item 0/NodeID/Number/27
    - Item 1/NodeID/Number/12
    - Item 2/NodeID/Number/2
  - New:
    - Item 0/NodeID/Number/27
    - Item 1/NodeID/Number/38
    - Item 2/NodeID/Number/37
Save, install and restart.

Technique removes Headphone detect and switching. Can be adapted to other PathMaps.

magnificentflamingo · November 19, 2017

Following procedure applies to 1220/PlatformsT.xml.zlib/PathMapID: 900 (layout 1):

3. Manual Internal Speaker and Headphone Selection - Displays both Internal Speaker and Headphones audio output devices. Note: An existing audio output device must be deleted to add Headphones as an audio output device.

Edit Platforms.xml/zml

Open Item/PathMapID

Verify PathMapID

Copy the current speaker/headphone (Item 2)

Paste the current speaker/headphone so there are two of the same (Item 0 and 3)

Drag Item 2 up to PathMap - 2 times (moves new item to correct position)

In Item 2, open next level and there are Item 0 and Item 1; delete Item 1 (headphones).

In Item 3, open next level and there are Item 0 and Item 1; delete Item 0 (speakers).

Edit this path map as follows:

Current

Item 0/NodeID/Number/27

Item 1/NodeID/Number/12

Item 2/NodeID/Number/2

New:

Item 0/NodeID/Number/27

Item 1/NodeID/Number/38

Item 2/NodeID/Number/37

Save, install and restart.

Technique removes Headphone detect and switching. Can be adapted to other PathMaps.

so after a lot of scratching my head trying to understand what you were trying to say in that documentation based on what's in PlatformsT.xml.zlib, I finallyyyyyy managed to get the manual selection working :D

thanks so much everyone for helping me <3 you all have incredible patience

ammoune78 · November 19, 2017

so after a lot of scratching my head trying to understand what you were trying to say in that documentation based on what's in PlatformsT.xml.zlib, I finallyyyyyy managed to get the manual selection working :D

thanks so much everyone for helping me <3 you all have incredible patience

You're welcome my MAN, i'm a simple user, but here there are masters that can help people, you was with Mr Toleda :yes:

Magemaster1776 · November 20, 2017

Hello
I'm trying to make my audio work using AppleALC, but i'm experiencing some problems:

1 - Internal mic don't work at all (speakers works)
2 - If I plug an headphone, audio works on headphone, but if i click on System Preferences > Sound > Input, i get a KP related to audio kext.
3 - HDMI audio don't work too.

VAIO SVF1532L1EB
ALC 233

Layout ID 3 (already tried 13 and 27, same results)
OSX High Sierra 10.13.1
Info.plist attached

Info.zip

idris iqbal · November 22, 2017

Hi guys

Can someone help me

I'm use AppleALC kext work and no problem in el capitan to sierra
Currently, I using high sierra 10.13.1 and I have problem with my headphone/headset
Sound not normal when headphone/headset connected and sound normal after I sleep and wake my device

My laptop Dell Inspiron 5458 core i3 5005U
Motherboard Dell.Inc 02X16F

Audio is Realtek ALC3234 (ALC255)
Vendor id 0x10ec0255
Revision id 0x100002

I've try all layout id ALC255 in pinconfig, that the result :
- Layout id 3, 13 and 17 --> in & out speaker and mic internal work but when I using headphone/headset, the sound is not normal (must sleep and wake my laptop to get it normal)
- Layout id 27 --> in & out speaker work, mic internal not work and same problem with headphone/headset. My laptop will restart when I used layout id 27 for a while
- Layout id 28 --> in & out speaker work, mic internal not work and still same problem with headphone/headset

I've update to last version AppleALC.kect, Lilu.kext and CodecCommander.kext but still have problem with headphone/headset

Can you help me to fix that
I'm very thankfull for yor help and sorry for my english

I attachmen codec dump my audio

Hi guys

Can someone help me

I'm use AppleALC kext work and no problem in el capitan to sierra
Currently, I using high sierra 10.13.1 and I have problem with my headphone/headset
Sound not normal when headphone/headset connected and sound normal after I sleep and wake my device

My laptop Dell Inspiron 5458 core i3 5005U
Motherboard Dell.Inc 02X16F

Audio is Realtek ALC3234 (ALC255)
Vendor id 0x10ec0255
Revision id 0x100002

I've try all layout id ALC255 in pinconfig, that the result :
- Layout id 3, 13 and 17 --> in & out speaker and mic internal work but when I using headphone/headset, the sound is not normal (must sleep and wake my laptop to get it normal)
- Layout id 27 --> in & out speaker work, mic internal not work and same problem with headphone/headset. My laptop will restart when I used layout id 27 for a while
- Layout id 28 --> in & out speaker work, mic internal not work and still same problem with headphone/headset

I've update to last version AppleALC.kect, Lilu.kext and CodecCommander.kext but still have problem with headphone/headset

Can you help me to fix that
I'm very thankfull for yor help and sorry for my english

I attach codec dump my audio

CodecDump.zip

MacPeet · November 24, 2017

hello @vandroiy2012

I have one more codec for Realtek ALC262 for Fujitsu Celsius H270.

LayoutID 13

Resources_new262.zip

all works good

can you please added the new codec?

…and, did you forget post #1850, codec´s ALC280_Dell T20 ???

many thanks

vandroiy2012 · November 24, 2017

…and, did you forget post #1850, codec´s ALC280_Dell T20 ???

many thanks

Hi

I will add them both tomorrow. Sorry for the delay...

maxb2000 · November 25, 2017

Hi,

I have a little problem with AppleALC kext: the selected audio devices doesn't stick on reboot or shutdown. LIke I pick internal speaker, restart the hack, then it default back to headphones. Why is that ?

It's just a minor thing..

MacPeet · November 26, 2017

Could anyone please help me with this tablet? It is a Conexant CX20724 (please see codec_dump.txt attached).

I'm not getting any sound from internal speaker (not greyed, not HDMI), but headphones work fine.

I've injected layout_id '3' via DSDT (HDAS, with Clover DSDT patch rename HDAS->HDEF). Am also using the latest AppleALC.kext with Lilu.kext. Have also tried AppleHDA Patcher but still no sound from the internal speakers.

Had been trying for months now, would really appreciate if someone could help me, please.

Thanks and regards,

Bubu

@bubu1234

Support only here in the thread !!! If possible, please not via PM !!!

I have only a simple german manual for patch AppleHDA for you. Maybe it helps you if you want to learn. https://www.root86.com/blog/40/entry-51-guide-anleitung-patch-applehda/

HDMI audio must be set in the DSDT (hda-gfx, HDAU) or in the Clover settings.

try this:

LayoutID11 (0B in DSDT-HDEF)

trial_CX20724_layoutID11.zip

what kind of laptop is this? exact name?

bubu1234 · November 26, 2017

@bubu1234

Support only here in the thread !!! If possible, please not via PM !!!

I have only a simple german manual for patch AppleHDA for you. Maybe it helps you if you want to learn. https://www.root86.com/blog/40/entry-51-guide-anleitung-patch-applehda/

HDMI audio must be set in the DSDT (hda-gfx, HDAU) or in the Clover settings.

try this:

LayoutID11 (0B in DSDT-HDEF)

trial_CX20724_layoutID11.zip

what kind of laptop is this? exact name?

Thank you very much MacPeet. My apologies, was desperate for help.

My tablet is a HP Elite X2 1012 G1.

I'll try the layout-11 and report back.

Thanks once again.

Best regards,

Bubu

=======

Edit: Layout-11 didn't work. Same issue, only sounds from headphones, nothing from the internal speakers.

I attach my audio from system profiler, and my ioreg for reference, please....

Thanks and regards,

Bubu

Archive.zip

vandroiy2012 · November 27, 2017

can you please added the new codec?

…and, did you forget post #1850, codec´s ALC280_Dell T20 ???

Added. Thank you! Sorry for the delay :rolleyes:

MacPeet · November 27, 2017

Thank you very much MacPeet. My apologies, was desperate for help.

My tablet is a HP Elite X2 1012 G1.

I'll try the layout-11 and report back.

Thanks once again.

Best regards,

Bubu

=======

Edit: Layout-11 didn't work. Same issue, only sounds from headphones, nothing from the internal speakers.

I attach my audio from system profiler, and my ioreg for reference, please....

Thanks and regards,

Bubu

And the inputs? Please always specify all info's of all devices!

IntSpeaker and HP are configured in SwitchMode. If HP is plugged in, then the speakers do not work. Exactly tested? If HP is deducted, no sound on IntSpeaker?

bubu1234 · November 27, 2017

And the inputs? Please always specify all info's of all devices!

IntSpeaker and HP are configured in SwitchMode. If HP is plugged in, then the speakers do not work. Exactly tested? If HP is deducted, no sound on IntSpeaker?

My apologies. Internal speaker does not work with the files you provided, even when HP is not plugged in.

I only get audio when I have HP plugged in; through the HPs.

Please lemme know if I have omitted any other info you may require please.

Appreciate all the help you've dispensed thus far...

MacPeet · November 27, 2017

And what about the inputs (Mic and LineIn)?

bubu1234 · November 27, 2017

And what about the inputs (Mic and LineIn)?

Not sure if I understood you correctly.

I've tested Siri with the Built-in Mic, it works with your files.

I'm picking up inputs (from Setting -> Sound) on LineIn... but Siri (I've also made sure to check that Siri takes inputs from the LineIn) doesn't pick up anything I say over LineIn.

MacPeet · November 28, 2017

@bubu1234

When intMic works, it's good.

LineIn probably only with pre-amplified mic or other device.

I do not have much ideas for intSpeaker anymore. Your codec is almost identical to Codec 3 from Mirone.

try this:

trial_CX20724_layoutID11_v2.zip

hello @vandroiy2012

Thank you for your work.

Another one, codec for Realtek ALC891 for HP Pavilion Power 580-030ng.

Resources_891.zip

LayoutID 11

all works good

can you please added the new codec?

many thanks

vandroiy2012 · November 28, 2017

hello @vandroiy2012

can you please added the new codec?

many thanks

Added. Thanks!

toleda · November 28, 2017

ALC269 - BRIX, layout-id: 1

ALC283 - NUC/BRIX, layout-id: 1

Both patch out ALC262

Thanks.

audio_alc269-alc.zip

audio_alc283-alc.zip

vandroiy2012 · November 29, 2017

ALC269 - BRIX, layout-id: 1

ALC283 - NUC/BRIX, layout-id: 1

Both patch out ALC262

Thanks.

Hi.

Thank you, but layout-id 1 for ALC269 is already in use. Could you please test and provide another free layout-id?

toleda · November 30, 2017

Could you please test and provide another free layout-id?

BRIX is long gone. Please add 283 only.

idris iqbal · December 1, 2017

Please somebody help me

Sound not normal when headphone/headset connected and sound normal after I sleep and wake my laptop

My laptop Dell Inspiron 5458 core i3 5005U
Motherboard Dell.Inc 02X16F

Audio is Realtek ALC3234 (ALC255)
Vendor id 0x10ec0255
Revision id 0x100002

I've try all layout id ALC255 in pinconfig, that the result :
- Layout id 3, 13 and 17 --> in & out speaker and mic internal work but when I using headphone/headset, the sound is not normal (must sleep and wake my laptop to get it normal)
- Layout id 27 --> in & out speaker work, mic internal not work and same problem with headphone/headset. My laptop will restart when I used layout id 27 for a while
- Layout id 28 --> in & out speaker work, mic internal not work and still same problem with headphone/headset

I've update to last version AppleALC.kect, Lilu.kext and CodecCommander.kext but still have problem with headphone/headset

Can you help me to fix that
I'm very thankfull for yor help and sorry for my english

I attach codec dump my audio

CodecDump.zip

AppleALC — dynamic AppleHDA patching

Recommended Posts

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites