vandroiy2012 Posted August 23, 2017 Share Posted August 23, 2017 can you please add the new additional codec layoutID 16 - ALC269VB for Optiplex790/990 Works good Added. Thank you 1 Link to comment Share on other sites More sharing options...
derek.zhu Posted August 24, 2017 Share Posted August 24, 2017 system was unable to boot, stuck with a message saying: busy timeout[0] 60s, kextd wait(0): 'IGPU', 'IOHDACodecFunction' 'PNLF' 'IOResources' however everything is fine if I disable applealc through boot argument 1. Motherboard model: CP65S2. Codec name: 8923. Layout used: best fits are 3 or 4, however both with flaws (when it used to work before)4. OS X: 10.12.65. Autogenerated Info.plist: in attachments, along with full boot log, my dsdt (with hotpatch), and my config.plist for clover I'll try remove the hotpatch and report back also worth noticing, previously there was another error message "alc @ codec entry misses properties, skipping", and that message was infinitely repeating and prevented booting applereport.zip Link to comment Share on other sites More sharing options...
ipurc Posted August 28, 2017 Share Posted August 28, 2017 vit9696, on 08 Mar 2016 - 05:46 AM, said:Hello,This is going to be a support/discussion topic of AppleALC on InsanelyMac. AppleALC is a kernel extension allowing you to enable native apple HD audio without any filesystem modifications. It dynamically injects the necessary modifications to AppleHDA (and other kexts) including thelayouts, and makes your audio work starting from the OS installation. It should be noted that AppleALC starting with version 1.1.0 requires Lilu.kext to be put in the same folder as AppleALC.kext. See this topic for more details. For quite some time we are trying to obtain the necessary information about AppleALC codec compatibility. If you use something, please, consider checking the compatibility table (do not worry, it is in English), and report (here) on your codec. We are also looking for all the possible revisions of the codec, if we do not have the revisions listed for your codec please report as well. Thanks for understanding. The report is meant to contain:1. Laptop model/Motherboard model2. Codec name3. Layout used with the info what works for you (ideally if you try them all)4. OS X versions you tried5. Autogenerated Info.plist made with the help of this utility. All the details including the source code are available on github:https://github.com/vit9696/AppleALCSome short wiki articles explaining the usage are included. As for now the project is relatively immature without practically any codec support. But it should be pretty easy to add more of them, I am hoping for the support of the "community" If you have any issues, better report them on github for structural reasons. hi i was able enable my sound , but mic / input audio not work, can you help me to solve that ?1. Asus a456ur / asus 100 series2. CX80503. i use layout id 34. osx sierra 10.12.65. info.plist in attach Info.plist.zip Link to comment Share on other sites More sharing options...
vusun123 Posted August 28, 2017 Share Posted August 28, 2017 hi i was able enable my sound , but mic / input audio not work, can you help me to solve that ? 1. Asus a456ur / asus 100 series 2. CX8050 3. i use layout id 3 4. osx sierra 10.12.6 5. info.plist in attach Try layout 28 then report back Link to comment Share on other sites More sharing options...
ipurc Posted August 28, 2017 Share Posted August 28, 2017 Try layout 28 then report back use layout 28 and no sound no mic , when i use layout 3 i got a sound, mic recognize but cant get input sound,, Link to comment Share on other sites More sharing options...
ipurc Posted August 28, 2017 Share Posted August 28, 2017 vusun123, on 28 Aug 2017 - 11:52 AM, said:vusun123, on 28 Aug 2017 - 11:52 AM, said:Try layout 28 then report back here is SS when i using layout 3 : http://imgur.com/a/ScON6 ,but when i using 28 not audio no sound,, i was finish dump my code i will include cx8050 codex in attach cx8050codec_dump.txt Link to comment Share on other sites More sharing options...
gulios Posted August 28, 2017 Share Posted August 28, 2017 Hello @ vandroiy2012, Ok, checked with Source 1.1.4, ALC260 works, thank you. From here new: can you please add the new additional codec layout ID 13 AD1984A for Optiplex780 / 760 Resources.zip old codec layoutID 11 is ManualMode (LineOut / HP) new additional codec layoutID 13 is SwitchMode (Speaker / HP or HDMI / HP) autodetect More choice for the users. Works good Hi, Can you write how did you generate it? I would like to generate for Asus UX430UA Audio device: 0x80869D71, Sub Device: 0x10431740, Codec ID:0x10EC0295, Revision: 0x0002 -> ALC295 Thank you Link to comment Share on other sites More sharing options...
WinstonAce Posted August 30, 2017 Share Posted August 30, 2017 Can you please add intel HD6000 HDMI audio? ig,platform is 04002616 <dict> <key>Comment</key> <string>BDW010509-Port_0x5-DP2HDM</string> <key>Find</key> <data>AQUJAAAEAAAHBQAA</data> <key>Name</key> <string>AppleIntelBDWGraphicsFramebuffer</string> <key>Replace</key> <data>AQUJAAAIAACCAAAA</data> </dict> Thanks Link to comment Share on other sites More sharing options...
vandroiy2012 Posted August 30, 2017 Share Posted August 30, 2017 Can you please add intel HD6000 HDMI audio? ig,platform is 04002616 <dict> <key>Comment</key> <string>BDW010509-Port_0x5-DP2HDM</string> <key>Find</key> <data>AQUJAAAEAAAHBQAA</data> <key>Name</key> <string>AppleIntelBDWGraphicsFramebuffer</string> <key>Replace</key> <data>AQUJAAAIAACCAAAA</data> </dict> Thanks Provide device-id of this card. Link to comment Share on other sites More sharing options...
WinstonAce Posted August 30, 2017 Share Posted August 30, 2017 8086 1626 Link to comment Share on other sites More sharing options...
vandroiy2012 Posted August 30, 2017 Share Posted August 30, 2017 8086 1626 Do you use fake-id or this is native id? Link to comment Share on other sites More sharing options...
WinstonAce Posted August 30, 2017 Share Posted August 30, 2017 native (from clover bdmesg) https://pci-ids.ucw.cz/read/PC/8086/1626 Link to comment Share on other sites More sharing options...
vandroiy2012 Posted August 30, 2017 Share Posted August 30, 2017 native (from clover bdmesg) https://pci-ids.ucw.cz/read/PC/8086/1626 Try it AppleALC.kext.zip Link to comment Share on other sites More sharing options...
WinstonAce Posted August 30, 2017 Share Posted August 30, 2017 Doesn't work I will upload debug log. Link to comment Share on other sites More sharing options...
vandroiy2012 Posted August 30, 2017 Share Posted August 30, 2017 Doesn't work I will upload debug log. Don't forget to delete previous patch from KextsToPatch section in config.plist Link to comment Share on other sites More sharing options...
WinstonAce Posted August 30, 2017 Share Posted August 30, 2017 I think I gave you the wrong device-id the GFX one and not the audio controller? https://pci-ids.ucw.cz/read/PC/8086/160c Link to comment Share on other sites More sharing options...
vandroiy2012 Posted August 30, 2017 Share Posted August 30, 2017 I think I gave you the wrong device-id the GFX one and not the audio controller? https://pci-ids.ucw.cz/read/PC/8086/160c No. I do need GFX device-id Don't forget: 1. Delete previous patch from config.plist 2. B0D3->HDAU rename 3. hda-gfx=onboard-1 in IGPU and in HDAU Link to comment Share on other sites More sharing options...
WinstonAce Posted August 30, 2017 Share Posted August 30, 2017 See attached the log log.rtf Link to comment Share on other sites More sharing options...
vandroiy2012 Posted August 30, 2017 Share Posted August 30, 2017 See attached the log Provide IOReg and EFI folder Link to comment Share on other sites More sharing options...
WinstonAce Posted August 30, 2017 Share Posted August 30, 2017 See attached Link to comment Share on other sites More sharing options...
vandroiy2012 Posted August 30, 2017 Share Posted August 30, 2017 See attached Is this desktop PC? Link to comment Share on other sites More sharing options...
WinstonAce Posted August 30, 2017 Share Posted August 30, 2017 Intel NUC Sent from my ONEPLUS A5000 using Tapatalk Link to comment Share on other sites More sharing options...
vandroiy2012 Posted August 30, 2017 Share Posted August 30, 2017 Intel NUC Sent from my ONEPLUS A5000 using Tapatalk Replace Clover folder with mine. Use config2.plist. CLOVER.zip Link to comment Share on other sites More sharing options...
WinstonAce Posted August 30, 2017 Share Posted August 30, 2017 What is the changes I need to check for? cause I don't want to use iMac14,3 SMBIOS also I don't use analog audio so is injecting layout-id 3 necessary? Thanks edit:Injecting layout 3 gave me analog audio but still no HDMI audio Link to comment Share on other sites More sharing options...
vandroiy2012 Posted August 30, 2017 Share Posted August 30, 2017 What is the changes I need to check for? cause I don't want to use iMac14,3 SMBIOS also I don't use analog audio so is injecting layout-id 3 necessary? Thanks I thought that you have laptop graphics so i made patch only for laptops. Now i changed it to desktop and put new AppleALC in Kexts/Other. Layout id is mandatory for Analog and HDMI audio. So here is new config also config2.plist.zip Change it in my Clover folder and use it to boot. Provide IOReg and AppleALC log Link to comment Share on other sites More sharing options...
Recommended Posts