Jump to content

HELP TOPIC - [AMD] OS X El Capitan (10.11)

Duran Keeley

By Duran Keeley,
in OS X 10.11 (El Capitan)

 Share
719 posts in this topic

Recommended Posts

spakk
spakk
Posted
Posted

Will do. Right after i test it with the extra folder on the installer this time

Ok i tested it with what i had before and i can say something was definitely not right about the installer i had before because it hangs at the same thing but there is something vastly different now.

yUfrEQY.jpg

change this system.kext against the original, in to S / L / E

and then use another USB Slot

System.kext.zip

  • Like 1
Link to comment
Share on other sites
Duran Keeley
Duran Keeley
Posted
  • Author
Posted

I faced that exact same issue not that long ago, Seemed to be an issue with the 10.11.3/4 installer. Reverted to the 10.11 BaseSystem and it worked just fine.

 

@duduobicho That is because the FX kernels are in testing.

@Shaneee Maybe it's a AMD issue? Used a 10.11.4 installer on my intel...

 

@duduobicho, check that you are getting CI/QE, you should with an nVidia card however. Also tried booting with nv_disable=0/1 and the nVidia drivers for mac?

  • Like 1
Link to comment
Share on other sites
spakk
spakk
Posted
Posted

I'm trying test, but all kernels give me so much freeze UI some help ?

Describe the problem in detail, possible with pictures if possible, otherwise upload your completel Extra folder here.

Link to comment
Share on other sites
Duran Keeley
Duran Keeley
Posted
  • Author
Posted

Use npci=0x3000

If he is using spakk's it should be set at 0x3000 already, maybe try 0x2000

 

 

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
	<key>CsrActiveConfig</key>
	<string>103</string>
	<key>EthernetBuiltIn</key>
	<string>Yes</string>
	<key>GUI</key>
	<string>No</string>
	<key>Graphics Mode</key>
	<string>1920x1080x32</string>  <==== edit the resolution !!!
	<key>Kernel Flags</key>
	<string>-v -f GraphicsEnabler=No nv_drive=1 npci=0x3000 usekernelcache=No</string>
	<key>GraphicsEnabler</key>
	<string>NO</string>
	<key>USBLegacyOff</key>
	<string>Yes</string>
	<key>UsbBusFix</key>
	<string>Yes</string>
</dict>
</plist>
please change your org.chameleon.boot.plist, as the example above, sory earlier not tested

 

  • Like 1
Link to comment
Share on other sites
CherryCream1
CherryCream1
Posted
Posted

sory, my mistake, please use nv_disable=1

I think you typed something wrong because for some reason it wont load any commands other than the ones like Graphics Enabler ect. But when i typed the commands manually into enoch it still hanged but now no longer says "cant get kextd port."

Link to comment
Share on other sites
Duran Keeley
Duran Keeley
Posted
  • Author
Posted

im gonna try nv_disable=1 instead of nv_drive=1

Also try booting with PCIRootUID=1 UseKernelCache=No

 

As of El Capitan The following boot flags don't work anymore I think:

kext-dev-mode=1 -f
PCI Configuration is just before the graphics load, so try remove GraphicsEnable flag or set it as yes
Link to comment
Share on other sites
CherryCream1
CherryCream1
Posted
Posted

nvm you just put -v before -f which made me think you messed it up


Also try booting with PCIRootUID=1 UseKernelCache=No

As of El Capitan The following boot flags don't work anymore I think:

kext-dev-mode=1 -f

-f definitely works. I learned about it a while ago. It stops all commands in front of it so you dont have to edit the .plist every single time.

Link to comment
Share on other sites
Duran Keeley
Duran Keeley
Posted
  • Author
Posted

nvm you just put -v before -f which made me think you messed it up

 

-f definitely works. I learned about it a while ago. It stops all commands in front of it so you dont have to edit the .plist every single time.

Not true, -f means no cache

For your reference: http://www.insanelymac.com/forum/topic/311532-kaslr-in-no-caches-boot/

 

-F

If you've entered some extra boot flags into org.Chameleon.boot.plist, but they're messing up your Hackintosh's bootloader, enter the -F boot flag to ignore them.

 

Notice the case sensitive commands.

 

 UseKernelCache GraphicsEnabler PCIRootUID
List of common commands here:

http://www.macbreaker.com/2012/01/list-of-common-hackintosh-boot-flags_29.html

Link to comment
Share on other sites
CherryCream1
CherryCream1
Posted
Posted

Not true, -f means no cache

For your reference: http://www.insanelymac.com/forum/topic/311532-kaslr-in-no-caches-boot/

 

-F

If you've entered some extra boot flags into org.Chameleon.boot.plist, but they're messing up your Hackintosh's bootloader, enter the -F boot flag to ignore them.

 

Notice the case sensitive commands.

 

 UseKernelCache GraphicsEnabler PCIRootUID
List of common commands here:

http://www.macbreaker.com/2012/01/list-of-common-hackintosh-boot-flags_29.html

 

oh. Then whats the point of -f if using UseKernelCache=No?

Anyway this is whats happening. Still hanging while ending with the same thing but now is very different.

hnCsEpO.jpg

Link to comment
Share on other sites
Duran Keeley
Duran Keeley
Posted
  • Author
Posted

oh. Then whats the point of -f if using UseKernelCache=No?

-f was more of a command used in Snow Leopard days, I think it still worked up until Yosemite. It might even work on El Capitan depending on how the bootloader & kernel are configured to handle it.

 

UseKernelCache=No is equivalent to using the "-f".

Link to comment
Share on other sites
CherryCream1
CherryCream1
Posted
Posted

-f was more of a command used in Snow Leopard days, I think it still worked up until Yosemite. It might even work on El Capitan depending on how the bootloader & kernel are configured to handle it.

 

UseKernelCache=No is equivalent to using the "-f".

It feels like im moving at a running pace but going no where =3=

Link to comment
Share on other sites
Duran Keeley
Duran Keeley
Posted
  • Author
Posted

How long are you letting it load before restarting? It can take a while sometimes for the things to load.

 

Also while you are at it, try repair the permissions using the following: (of course edit the path for your USB path to /E & /S/L/E)

sudo chown -R 0:0 /Extra

sudo chmod -R 755 /Extra

sudo chown -R 0:0 /System/Library/Extensions

sudo chmod -R 755 /System/Library/Extensions
And are you manually creating the setup?
Link to comment
Share on other sites
CherryCream1
CherryCream1
Posted
Posted

How long are you letting it load before restarting? It can take a while sometimes for the things to load.

 

Also while you are at it, try repair the permissions using the following:

sudo chown -R 0:0 /Extra

sudo chmod -R 755 /Extra

sudo chown -R 0:0 /System/Library/Extensions

sudo chmod -R 755 /System/Library/Extensions
And are you manually creating the setup?

 

Well its not exactly still loading when it says "exited with abnormal code:" and what do you mean by manually creating the setup ?

Link to comment
Share on other sites
Duran Keeley
Duran Keeley
Posted
  • Author
Posted

Well its not exactly still loading when it says "exited with abnormal code:" and what do you mean by manually creating the setup ?

Yeah, just did some search on that, I thought it would only be the time service exiting for not being online or something but it's not.

 

Try this version of the FakeSMC (way older version), and remove nv_disable=1

 

FYI: Manual create installer tutorial here - Follow the Yosemite instructions

http://www.insanelymac.com/forum/topic/280756-guide-the-all-in-one-guide-to-vanilla-os-x-including-chameleon-dsdt-for-beginners-updated-for-yosemite/

 

Of course use Enoch r2795 instead of chameleon and don't worry about serials & dsdt yet.

FakeSMC.kext.zip

Link to comment
Share on other sites
CherryCream1
CherryCream1
Posted
Posted

Yeah, just did some search on that, I thought it would only be the time service exiting for not being online or something but it's not.

 

Try this version of the FakeSMC (way older version), and remove nv_disable=1

Alright. Ill get back to you after i test it

ye i waited a little bit like you asked and dis happened.

osABDGJ.jpg

Link to comment
Share on other sites
Duran Keeley
Duran Keeley
Posted
  • Author
Posted

 

[img=http://i.imgur.com/hnCsEpO.jpg]

 

Just tried El Capitan on a spare laptop I had and I came across the same problem, so I fixed mine... Hopefully this sorts yours out

 

The new version of Enoch (r2795) doesn't accept

<string>CsrActiveConfig</string>
<key>103</key>
In org.chameleon.plist

 

I noticed when booting it was still setting SIP as 1 instead of 67

 

BUT if you manually type it "CsrActiveConfig=103" it works, I tried pasting CsrActiveConfig=103 in the Kernel Flag section but still was set at 1.

PS: Also do not use my old FakeSMC (v4) and use a newer version like here: FakeSMC.kext.zip

  • Like 1
Link to comment
Share on other sites
 Share
Go to topic listing
×
×
  • Create New...