spakk Posted March 8, 2016 Share Posted March 8, 2016 what error you get now? describe the error message or post a picture. Link to comment Share on other sites More sharing options...
0xPure Posted March 8, 2016 Share Posted March 8, 2016 Could not restore - Input/output error. Np, made it in other USB drive. First boot: loop. Then I gonna use the Dummy drivers. 2nd boot with the two Dummy drivers: the loop is gone but apoears lot of com.xpc.launchd errors as I show you in my last images. I can see something new Link to comment Share on other sites More sharing options...
spakk Posted March 8, 2016 Share Posted March 8, 2016 (edited) AHCIPortInjector.kext This kext inject id device for Sata chip : AppleAHCIDiskDriver, IOAHCISerialATAPI, ASMedia ASM1061, ASMedia ASM1062, DH89xxCC AHCI, AppleSATAExpress, GenericAHCI, ICH10AHCI, ICH10RAHCI, ICH10RAID, ICH10RRAID, ICH6 ESB2 AHCI, ICH6 ESB2 RAID, ICH7MAHCI, ICH7MRAID, ICH7RAHCI, ICH7RAHCI, ICH7RRAID, ICH8AHCI, ICH8MAHCI, ICH8MRAID, ICH8RAHCI, ICH8RRAID, ICH9AHCI, ICH9MAHCI, ICH9MRAID, ICH9RAHCI, ICH9RRAID, Intel10SeriesAHCI, Intel5SeriesAHCI, Intel5SeriesRAID, Intel6SeriesAHCI, Intel6SeriesRAID, Intel7SeriesAHCI, Intel7SeriesRAID, Intel8SeriesAHCI, Intel9SeriesAHCI, IntelC600SeriesAHCI, IntelC600SeriesRAID, IntelLynxPointAHCI, IntelLynxPointRAID, IntelWellsburgAHCI, IntelWellsburgRAID, JMicron JMB360 AHCI, JMicron JMB360 RAID, JMicron JMB361 AHCI, JMicron JMB361 RAID, JMicron JMB362 AHCI, JMicron JMB362 RAID, JMicron JMB363 AHCI, JMicron JMB363 RAID, JMicron JMB364 AHCI, JMicron JMB365 AHCI, JMicron JMB366 AHCI, JMicron JMB366 RAID, JMicron JMB369 AHCI, JMicronAHCI, MCP79AHCI, MCP89AHCI, Marvell 88SE9120, Marvell 88SE9123, Marvell 88SE9125, Marvell 88SE9128, Marvell 88SE9172, Marvell 88SE91A0, Marvell 88SE9230, Marvell 88SE9480 Could not restore - Input/output error.Np, made it in other USB drive.First boot: loop. Then I gonna use the Dummy drivers.2nd boot with the two Dummy drivers: the loop is gone but apoears lot of com.xpc.launchd errors as I show you in my last images. I can see something new fix the USB Flash Disk with DiskWarrior 4.4 or vers. 5.0 or format or create new AHCIPortInjector.kext.zip Edited March 8, 2016 by spakk 3 Link to comment Share on other sites More sharing options...
0xPure Posted March 8, 2016 Share Posted March 8, 2016 So I remove the two Dummy drivers, right? I need to have: NullCPUPower bla bla... FakeSMC And these two that you attached now, I'm correct? Link to comment Share on other sites More sharing options...
spakk Posted March 8, 2016 Share Posted March 8, 2016 I am sending the complete Extra folder to your mailbox 1 Link to comment Share on other sites More sharing options...
jaymack Posted March 8, 2016 Share Posted March 8, 2016 Enoch r2795. Works great for El Capitan. That's the only bootloader I use these days. Needs DSDT + boot plist + SMBIOS plist in /Extra Kexts for injection (no caching) go to /Extra/Extensions from where they're loaded at boot time if option KernelBooter_kexts is set to Yes Kexts for caching go to /Library/Extensions (or /S/L/E) Which Haswell CPU you have? i7-4690K does not exist. i5 does though... You'll probably also need option KernelPm set to Yes too. I am so glad to have read this post. I had been struggling to install El Capitan with Clover, and when I succeeded, I saw no advantage over Enoch, certainly it did not load faster. I will now forget Clover and remain with Enoch. Link to comment Share on other sites More sharing options...
RudeJake Posted March 8, 2016 Share Posted March 8, 2016 i clean the usb with fresh 10.11.2, replaced the kernel , deleted in e/e everything except fakeSMC and NullCPUPowerManagment. did the usb fix v3 added the files for the archive which spakk gave and added the AHCIPortInjector.kext i think the last kext fixed the issue not the other kexts. 2 Link to comment Share on other sites More sharing options...
0xPure Posted March 8, 2016 Share Posted March 8, 2016 i clean the usb with fresh 10.11.2, replaced the kernel , deleted in e/e everything except fakeSMC and NullCPUPowerManagment. did the usb fix v3 added the files for the archive which spakk gave and added the AHCIPortInjector.kext i think the last kext fixed the issue not the other kexts. I'm gonna try right now! Boot flags? 1 Link to comment Share on other sites More sharing options...
spakk Posted March 8, 2016 Share Posted March 8, 2016 i clean the usb with fresh 10.11.2, replaced the kernel , deleted in e/e everything except fakeSMC and NullCPUPowerManagment. did the usb fix v3 added the files for the archive which spakk gave and added the AHCIPortInjector.kext i think the last kext fixed the issue not the other kexts. thank you for your description, which will help many Asus mainboard users to install el Capitan Link to comment Share on other sites More sharing options...
RudeJake Posted March 8, 2016 Share Posted March 8, 2016 here is the plist <key>BooterConfig</key> <string>0x28</string> <key>CsrActiveConfig</key> <string>103</string> <key>EthernetBuiltIn</key> <string>Yes</string> <key>Kernel</key> <string>/System/Library/Kernels/kernel</string> <key>Kernel Flags</key> <string>kext-dev-mode=1 usekernelcache=No -v -f npci=0x3000</string> <key>USBBusFix</key> <string>Yes</string> <key>USBLegacyOff</key> <string>No</string> 2 Link to comment Share on other sites More sharing options...
0xPure Posted March 8, 2016 Share Posted March 8, 2016 Here it is my Extra folder Spakk. I can't attach files in private... Extra.zip Link to comment Share on other sites More sharing options...
RudeJake Posted March 8, 2016 Share Posted March 8, 2016 there are too much kexts there i think you are causing a kernel panic, here is my extra folder by the way i used the kext wizard to install the kexts and fix the permissions extra.zip 1 Link to comment Share on other sites More sharing options...
0xPure Posted March 8, 2016 Share Posted March 8, 2016 there are too much kexts there i think you are causing a kernel panic, here is my extra folder: But you said that you used the USB Fix package and these are all the kexts which the package includes :S I'm getting confused. Thank you for your Extra folder, I'm gonna try it. Link to comment Share on other sites More sharing options...
spakk Posted March 8, 2016 Share Posted March 8, 2016 the content of Extra/Extensions will cause conflicts, I have canged the contents, see in your box you can not install two identical drivers, this will go into the panties (kernel panic !) 1 Link to comment Share on other sites More sharing options...
0xPure Posted March 8, 2016 Share Posted March 8, 2016 AppleUSBEHCI loop again... Link to comment Share on other sites More sharing options...
spakk Posted March 8, 2016 Share Posted March 8, 2016 make a test boot without to change the drivers in S / L / E , if it does not work then change/replace AppleUSBEHCI loop again... wait ...no panic Link to comment Share on other sites More sharing options...
0xPure Posted March 8, 2016 Share Posted March 8, 2016 make a test boot without to change the drivers in S / L / E , if it does not work then change/replace You mean without removing AppleIntelCPU...AppleTyMCEDriver, IOUSBFamily, tplemetry, etc... Link to comment Share on other sites More sharing options...
RudeJake Posted March 8, 2016 Share Posted March 8, 2016 AlexMnrs try replacing extra with my folder and just follow spakk's guide for the usb fix : including removing the kexts. Link to comment Share on other sites More sharing options...
spakk Posted March 8, 2016 Share Posted March 8, 2016 if you will install the package, then delete in System/Library/Extensions/ ==> IOUSBFamily.kext, IOUSBMAssStorageDriver.kext, IOUSBMassStorageClass.kext. and these drivers ===> ,AppleIntelCPUPowerManagement.kext (makes kernel panic on AMD!!) and AppleTyMCEDriver.kext (makes MSR Error on AMD !!!) (and this: pmtelemetry.kext (caused problems kernel during the creation of prelinked !! ) after install of el capitan) then install the USB-Fix package V3 Link to comment Share on other sites More sharing options...
0xPure Posted March 8, 2016 Share Posted March 8, 2016 AlexMnrs try replacing extra with my folder and just follow spakk's guide for the usb fix : including removing the kexts. if you will install the package, then delete in System/Library/Extensions/ ==> IOUSBFamily.kext, IOUSBMAssStorageDriver.kext, IOUSBMassStorageClass.kext. and these drivers ===> ,AppleIntelCPUPowerManagement.kext (makes kernel panic on AMD!!) and AppleTyMCEDriver.kext.(makes MSR Error on AMD !!!) (and this: pmtelemetry.kext after install of el capitan) then install the USB-Fix package V3 Maybe the problem is that I've never used KextWizard to install any kext or repair permissions... I just copied the kext in the folder and eject the device, restart and try... always the same process.. But I'm gonna try all, but I'm going crazy T_T OOOOOOGHHHHHHHHHH PARTY HARDDDDDD OMG! IS IT WORKING??? The extra folder of RudeJake and the usb fix v3 installed with KextWizard on S/L/E and repaired permissions. I GET THE INSTALLER WOOOHO! My mouse is working, my keyboard... jahdjekfkwkgue Im very excited after a week with this f**king annoying problem *_* I will let you know if the installation works and I get the desktop and THANK YOU ALL, you know I love you. Link to comment Share on other sites More sharing options...
0xPure Posted March 8, 2016 Share Posted March 8, 2016 When the installer finishes I'm need to install Enoch on my HDD or just copy only the Extra folder from the pendrive to de HDD? Link to comment Share on other sites More sharing options...
RudeJake Posted March 9, 2016 Share Posted March 9, 2016 new problem now , when i open the disk utility i don't see any hard drives, i thought it because i'm using raid0, but i removed and still Link to comment Share on other sites More sharing options...
krabbenharry Posted March 9, 2016 Share Posted March 9, 2016 (edited) Hey, so i know this might not be the appropriate place to ask this but, will El Capitan work with my FX 6300? And will it be able to use all Six Cores? ( i know theyre essentially 3 cores with sort of hyperthreading ). Graphics Card is a GTX 750 TI, i know Maxwell works well with Yosemite, so this should not be a Problem. Any Answers are appreciated! edit by spakk: yes it will recognize and work with your FX cpu, except the only litle problem with glitchy icons Edited March 9, 2016 by spakk Link to comment Share on other sites More sharing options...
0xPure Posted March 9, 2016 Share Posted March 9, 2016 new problem now , when i open the disk utility i don't see any hard drives, i thought it because i'm using raid0, but i removed and still I would like to help you but I have no idea. You have any graphics problem RudeJake? Because I have random green colors on some buttons and the os is lagging a lot. I have installed the NVIDIA Web Driver but it seems to be a problem with AMD or something like this.. so I am on Windows, is just impossible to me to use El Capitan with this graphics glitches Link to comment Share on other sites More sharing options...
spakk Posted March 9, 2016 Share Posted March 9, 2016 RudeJake has at the moment other problem, which has nothing to do with the USB ports . Link to comment Share on other sites More sharing options...
Recommended Posts