spakk Posted January 28, 2016 Share Posted January 28, 2016 Do you know how to inject it for hd7770? I have no idea how ItsMe, I'm still waiting for your dsdt and the ioreg Seem like it doesn't work. But I'm not sure i did the right way to launched the DSDT file. Because I'm new guy. maybe i made some low-level mistakes. I add that DSDT file to /Extra/extensions/ folder . Then edit org.chameleon.Boot.plist file <key>CsrActiveConfig</key> <string>103</string> <key>DSDT</key> <string>/Extra/Extensions/DSDT.aml</string> <key>Kernel Flags</key> <string>-v -f npci=0x3000</string> <key>SMBIOS</key> <string>/Extra/SMBios.plist</string> And here is my Extra folder.Extra.zip I have a question is my motherboard don't support USB 3.0. So can i just try old SMBios like Mac Pro 3,1 which don't have XHCI port. The last question is how can i see SMBios and DSDT successful launched. Thanks for you work. I edit the contents of your Extra folder and send it to you, but so that could not work well what did you do , not a cause. Link to comment Share on other sites More sharing options...
itisme754 Posted January 28, 2016 Share Posted January 28, 2016 ItsMe, I'm still waiting for your dsdt and the ioreg I edit the contents of your Extra folder and send it to you, but so that could not work well what did you do , not a cause. Already did on a previous post but here again: IOREG DSDT Link to comment Share on other sites More sharing options...
spakk Posted January 28, 2016 Share Posted January 28, 2016 itsme, again I do not have access to Google Drive, which I sent you a message on your mailbox and I gave you an upload server link, for free and without registration, because you can upload up to 500 MB, please plz use these for upload: http://workupload.com/ Link to comment Share on other sites More sharing options...
spakk Posted January 28, 2016 Share Posted January 28, 2016 Seem like it doesn't work. But I'm not sure i did the right way to launched the DSDT file. Because I'm new guy. maybe i made some low-level mistakes. I add that DSDT file to /Extra/extensions/ folder . Then edit org.chameleon.Boot.plist file <key>CsrActiveConfig</key> <string>103</string> <key>DSDT</key> <string>/Extra/Extensions/DSDT.aml</string> <key>Kernel Flags</key> <string>-v -f npci=0x3000</string> <key>SMBIOS</key> <string>/Extra/SMBios.plist</string> And here is my Extra folder.Extra.zip I have a question is my motherboard don't support USB 3.0. So can i just try old SMBios like Mac Pro 3,1 which don't have XHCI port. The last question is how can i see SMBios and DSDT successful launched. Thanks for you work. antonio, Just for info: I have sent you a message, and asking your to send me your full hardware spec, so that I can prepare your data. Already did on a previous post but here again: IOREG DSDT plz test and send me your report, see in your mailbox Link to comment Share on other sites More sharing options...
spakk Posted January 28, 2016 Share Posted January 28, 2016 if someone has a code by Apple and would like to test iCloud and iMessage, who wants to test these, please (many thx goes to lpukraine) http://www.insanelymac.com/forum/topic/310643-el-capitan-chameleon-imessage-nvram-filenvramkext-working/ Link to comment Share on other sites More sharing options...
Mr___G Posted January 28, 2016 Share Posted January 28, 2016 Hi Spakk after your advice I have successfully installed El Capitan on my rig....Thank you....However I just get instant reboots system seems not to load anything at all then reboots ....could this be graphics related my friend I have R9270X...Thanks in advance. Link to comment Share on other sites More sharing options...
spakk Posted January 28, 2016 Share Posted January 28, 2016 Hi Spakk after your advice I have successfully installed El Capitan on my rig....Thank you....However I just get instant reboots system seems not to load anything at all then reboots ....could this be graphics related my friend I have R9270X...Thanks in advance. send me your dsdt and your ioreg, I've found that I have an inject for a graphics card .......Have you tried to patch the drivers? ran previously your system normal? in advance, sory if I ask ... I've lost a little track. Link to comment Share on other sites More sharing options...
Mr___G Posted January 28, 2016 Share Posted January 28, 2016 Thanks a lot my freind download Not yet tried to patch drivers.... only just managed to successfully install after using your usb fix and making installer 4 times I have never had El Capitan working as of yet my friend. Link to comment Share on other sites More sharing options...
spakk Posted January 28, 2016 Share Posted January 28, 2016 Thanks a lot my freind download Not yet tried to patch drivers.... only just managed to successfully install after using your usb fix and making installer 4 times I have never had El Capitan working as of yet my friend. if you write that your system is not fully boot, can you describe in more details? what happens after start the bootloader? Link to comment Share on other sites More sharing options...
Mr___G Posted January 28, 2016 Share Posted January 28, 2016 Enoch starts up and gets to the part where it reads extensions from /Extra then /System/Library/Extensions then reboot. No drivers load at all my friend Link to comment Share on other sites More sharing options...
Shaneee Posted January 28, 2016 Share Posted January 28, 2016 Enoch starts up and gets to the part where it reads extensions from /Extra then /System/Library/Extensions then reboot. No drivers load at all my friend Did you replace the kernel on the installed partition after installing? Link to comment Share on other sites More sharing options...
spakk Posted January 28, 2016 Share Posted January 28, 2016 if the system does not boot after that, then it is probably not start the amd kernel, then the referencing to the amd kernel is incorrectly (in org.chameleon.boot.plist) or not matching the kernel, either in the folders Extra or in S/L/kernels .... then you have to check a) the entry of the org.chameleon.boot.plist ....b.) or check the folder where the amd kernel is actually installed.. but when the system boots ... what happens then.... Link to comment Share on other sites More sharing options...
Mr___G Posted January 28, 2016 Share Posted January 28, 2016 Did you replace the kernel on the installed partition after installing? Certainly did mate. Link to comment Share on other sites More sharing options...
spakk Posted January 28, 2016 Share Posted January 28, 2016 @Mr___G, plz check #549 @Shaneee, thanks for your help, I will edit in meantime his dsdt.. 1 Link to comment Share on other sites More sharing options...
Shaneee Posted January 28, 2016 Share Posted January 28, 2016 Certainly did mate. Then it may be using the vanilla kernels caches. Navigate to System/Library/Caches/com.apple.kext.caches/Startup and remove kernelcache then navigate to System/Library/PrelinkedKernels and remove prelinkedkernel then boot using -f Link to comment Share on other sites More sharing options...
Mr___G Posted January 28, 2016 Share Posted January 28, 2016 Thanks to Shaneee and Spakk ....much apprieciated guys...Kernel seems normal location and no reference in boot.plist Link to comment Share on other sites More sharing options...
spakk Posted January 28, 2016 Share Posted January 28, 2016 Certainly did mate. your DSDT.aml is exactly 0 bytes in size, do the following, ioreg is okay install dsdt editor then export as dsdt.dsl or dsdt.aml or copy the contents in a txt file Link to comment Share on other sites More sharing options...
Mr___G Posted January 28, 2016 Share Posted January 28, 2016 Then it may be using the vanilla kernels caches. Navigate to System/Library/Caches/com.apple.kext.caches/Startup and remove kernelcache then navigate to System/Library/PrelinkedKernels and remove prelinkedkernel then boot using -f ok will try that thanks mate.... your DSDT.aml is exactly 0 bytes in size, do the following, ioreg is okay install dsdt editor then export as dsdt.dsl or dsdt.aml or copy the contents in a txt file ok sorry about that i will upload it now Here you go Spakk my apologies for the last one download Then it may be using the vanilla kernels caches. Navigate to System/Library/Caches/com.apple.kext.caches/Startup and remove kernelcache then navigate to System/Library/PrelinkedKernels and remove prelinkedkernel then boot using -f Didn't work I'm afraid Shaneee....Thanks anyways. Link to comment Share on other sites More sharing options...
spakk Posted January 28, 2016 Share Posted January 28, 2016 do you use the PCI graphics card or the onboard graphics card? if PCI then desable the internal graphics card in BIOS ===> "Disable on-chip VGA" Otherwise OS X will not boot. Link to comment Share on other sites More sharing options...
Mr___G Posted January 28, 2016 Share Posted January 28, 2016 do you use the PCI graphics card or the onboard graphics card? if PCI then desable the internal graphics card in BIOS ===> "Disable on-chip VGA" Otherwise OS X will not boot. I use my SAPPHIRE RADEON R9 270X 2GB onboard is always disabled Link to comment Share on other sites More sharing options...
spakk Posted January 28, 2016 Share Posted January 28, 2016 okay, just wanted to make sure Link to comment Share on other sites More sharing options...
Mr___G Posted January 28, 2016 Share Posted January 28, 2016 No problem my friend I have never had this problem before...Yosemite 10.10.5 runs better on my rig than it does on my friends iMac and that's thanks to yourself Bronya Shaneee and so on and so on. I am just shocked El Capitan is so much harder to get running as smooth. Thanks for your time. Link to comment Share on other sites More sharing options...
itisme754 Posted January 28, 2016 Share Posted January 28, 2016 Link to comment Share on other sites More sharing options...
Shaneee Posted January 28, 2016 Share Posted January 28, 2016 @itisme754 do you have the following in your boot.plist? CsrActiveConfig 103 Link to comment Share on other sites More sharing options...
spakk Posted January 29, 2016 Share Posted January 29, 2016 a1IJlAR.jpg can you try something? use the Extensions folder before the change to the USB fix, fix permissions, renew the kernel cache.and strart again, with the dsdt Link to comment Share on other sites More sharing options...
Recommended Posts