polyzargone Posted December 9, 2015 Share Posted December 9, 2015 Can't wait ! 1 Link to comment Share on other sites More sharing options...
jaylex Posted December 10, 2015 Share Posted December 10, 2015 Can't wait ! Fingers cross!! Link to comment Share on other sites More sharing options...
jsl Posted December 10, 2015 Share Posted December 10, 2015 Here is the next iteration of the El Capitan 10.11.0 AMD kernel. Install on a clean system; otherwise, your mileage may vary. 10110R2.zip I haven't updated my system to 10.11.2 but it's good to know that the previous kernel is working on that as system as well. Thanks for such an excellent new AMD kernel which works for Phenom x4 9850 CPU in Asus M3A MB at 10.11.2 (15C40a). I have to disable USB 2.0 in BIOS to prevent multiple errors related to AppleUSBEHCI during booting even I have modified DSDT to EHC1/EHC2. Need to figure out the best solution for my Hackintosh at El Capitan. Link to comment Share on other sites More sharing options...
pico joe Posted December 10, 2015 Share Posted December 10, 2015 Yes.. Kernel can boot in my sig, 10.11. 1, the problem just like jsl said @usb or this general problem for non intel chip @jsl what smbios are you using? Link to comment Share on other sites More sharing options...
spakk Posted December 10, 2015 Share Posted December 10, 2015 unfortunately with the same Opcode problem as with kernel r1. I'd really like build my old kernel patch into El Capitan kernel but unfortunately I get still the same error message when i compile the kernel. Link to comment Share on other sites More sharing options...
Shaneee Posted December 10, 2015 Share Posted December 10, 2015 unfortunately with the same Opcode problem as with kernel r1. Do you have EvoReboot installed? I also confirm that EVOReboot.kext cause opcode errors (at least on my system). Link to comment Share on other sites More sharing options...
spakk Posted December 10, 2015 Share Posted December 10, 2015 No, my friend Link to comment Share on other sites More sharing options...
zheselevko Posted December 10, 2015 Share Posted December 10, 2015 tell me what you need to install kekts Link to comment Share on other sites More sharing options...
spakk Posted December 10, 2015 Share Posted December 10, 2015 Nullpower and fakesmc Link to comment Share on other sites More sharing options...
jaylex Posted December 10, 2015 Share Posted December 10, 2015 I can't even install the os because of kernel panic nanoseconds. Anybody that has a amd fx processor that have the 10.11.2 running with this kernel? And also the same yosemite kext in extra folder works with El Capitan? Link to comment Share on other sites More sharing options...
kaplishkap011 Posted December 10, 2015 Share Posted December 10, 2015 Can anyone help me how can I install OS X El Capitan on my amd fx 4100 computer? Link to comment Share on other sites More sharing options...
jaylex Posted December 10, 2015 Share Posted December 10, 2015 Can anyone help me how can I install OS X El Capitan on my amd fx 4100 computer? I don't think the kernel is compatible with amd fx because I have try it and it doesn't work and no one has confirmed that works on amd fx Link to comment Share on other sites More sharing options...
Mr. Xtreme Posted December 10, 2015 Share Posted December 10, 2015 (edited) I don't think the kernel is compatible with amd fx because I have try it and it doesn't work and no one has confirmed that works on amd fx I'm going to try on mt FX 6300, will report back. BTW this is my 600th post Rebooting to try installing El Cappy, ptay for me. Edited December 10, 2015 by XtremeHacker 5 Link to comment Share on other sites More sharing options...
Mr. Xtreme Posted December 10, 2015 Share Posted December 10, 2015 (edited) I'm going to try on mt FX 6300, will report back. BTW this is my 600th post Rebooting to try installing El Cappy, ptay for me. I can never get the installer to the actual installer, all I get is the stuff Enoch shows pre-booting the actaull installer. P.S. Thanks for likes. Edited December 10, 2015 by XtremeHacker 1 Link to comment Share on other sites More sharing options...
onursarigul0 Posted December 10, 2015 Share Posted December 10, 2015 Hey i just want to know, what i have to do with this. After this pc just restarting. And el capitan is not the only one. I tried to install yosemite 10.10.5 using clover uefi but same issue here. I used to installed yosemite with chameleon but when i changed my motherboard i don't wanna waste the uefi option. Thanks for the kernel by the way. Link to comment Share on other sites More sharing options...
Mr. Xtreme Posted December 11, 2015 Share Posted December 11, 2015 no clover there? Whenever I use clover my mouse doesn't work, not in clover or OS X I have tried the mouse drivers. Link to comment Share on other sites More sharing options...
jaylex Posted December 11, 2015 Share Posted December 11, 2015 Whenever I use clover my mouse doesn't work, not in clover or OS X I have tried the mouse drivers. Yeah I don't think the kernel works with amd fx processors!! I guess we have to wait and see! Link to comment Share on other sites More sharing options...
Mr. Xtreme Posted December 11, 2015 Share Posted December 11, 2015 Yeah I don't think the kernel works with amd fx processors!! I guess we have to wait and see! I'm going to try the first kernel (Been testing the 2nd) and report back. @Shanee what did you need to do so that you could install El Cappy? Link to comment Share on other sites More sharing options...
jsl Posted December 11, 2015 Share Posted December 11, 2015 Thanks for such an excellent new AMD kernel which works for Phenom x4 9850 CPU in Asus M3A MB at 10.11.2 (15C40a). I have to disable USB 2.0 in BIOS to prevent multiple errors related to AppleUSBEHCI during booting even I have modified DSDT to EHC1/EHC2. Need to figure out the best solution for my Hackintosh at El Capitan. Applied this 10.11R2 new kernel for Athlon 64 x2 6000+ in Asus M4A78 Plus MB got very similar results: 1. Need disable USB 2.0 in BIOS 2. Finder & System Preferences seem a little bit slow responding and easily crashed 3. Invisible Apple icon on the left top corner and missing some icons on the top row of Finder in Nvidia GTX 680 with newest Web Nvidia Driver I don't know whether these are related to AMD kernel or not, but there is no such abnormalities in Bronya's 10.10.5RC3 kernel with Yosemite 10.10.5 Link to comment Share on other sites More sharing options...
zheselevko Posted December 11, 2015 Share Posted December 11, 2015 this kernel does not work with amd fx I punched a lot of ways but nothing helps a kernel panic or Problem appleusbehci Link to comment Share on other sites More sharing options...
polyzargone Posted December 11, 2015 Share Posted December 11, 2015 2. Finder & System Preferences seem a little bit slow responding and easily crashed Have you installed VoodooTSCSyncAMD.kext ? That kext fixed a lot (not all) of those issues on my system (ASRock N68-S Athlon 64 x2 5600+). this kernel does not work with amd fx I punched a lot of ways but nothing helps a kernel panic or Problem appleusbehci If a problem occurs with AppleUSBEHCI, you may have to fix and bypass the damned new USB management under OS X 10.11 … Have a look here or here. 1 Link to comment Share on other sites More sharing options...
zheselevko Posted December 11, 2015 Share Posted December 11, 2015 Have you installed VoodooTSCSyncAMD.kext ? That kext fixed a lot (not all) of those issues on my system (ASRock N68-S Athlon 64 x2 5600+). If a problem occurs with AppleUSBEHCI, you may have to fix and bypass the damned new USB management under OS X 10.11 … Have a look here or here. Thank you. I'm going to try now Link to comment Share on other sites More sharing options...
iMiksa Posted December 11, 2015 Share Posted December 11, 2015 I created latest clover on a flash drive, with 10.11.2 , copied kernel R2 on a root of the flash, Bios is setted up for Hackintosh, since I'm already using Yosemite. Restarted, choose boot from flash, select USB Installer, boot verbose, and only got "_" on a top left on the screen. What I'm doing wrong? tried with various of boot flags like npci=0x2000, rootless=0 or 1 ...... Every time is the same, nothing happends... I know that stupid questions are borred to you guys, but I asking someone to help me start El Cappy.... maybe where to put Kernel, some boot flags, and staf like that Thanx everyone for helping me in advance here are my spec Phenom2 960t, ati 6850, 8 gb ram, and legacy bios Link to comment Share on other sites More sharing options...
polyzargone Posted December 11, 2015 Share Posted December 11, 2015 I created latest clover on a flash drive, with 10.11.2 , copied kernel R2 on a root of the flash, Bios is setted up for Hackintosh, since I'm already using Yosemite. Restarted, choose boot from flash, select USB Installer, boot verbose, and only got "_" on a top left on the screen. What I'm doing wrong? tried with various of boot flags like npci=0x2000, rootless=0 or 1 ...... Every time is the same, nothing happends... I know that stupid questions are borred to you guys, but I asking someone to help me start El Cappy.... maybe where to put Kernel, some boot flags, and staf like that I didn't had any success so far trying to use Clover for booting a USB pen or the El Capitan partition when installed. It looks like latest Clover version (r3330) is unable to boot anything AMD on my system. No Yos, No Cap, no nothing . At least, the r3259 (which is the first one fully compatible with El Capitan) is able to boot Yosemite. But again, El Cap = NO WAY !!! Same as you : "_" on a top left on the screen. This is just incomprehensible. I tried every relevant installing methods with no luck. So I would recommend to stick to latest Enoch r2775 which works fine as long as you configure your Extra folder correctly. See here and here. PS : Put kernel in root or use this boot-flag (assuming you put it in Extra folder) : <key>Kernel</key> <string>/Extra/kernel</string> 2 Link to comment Share on other sites More sharing options...
iMiksa Posted December 11, 2015 Share Posted December 11, 2015 I didn't had any success so far trying to use Clover for booting a USB pen or the El Capitan partition when installed. It looks like latest Clover version (r3330) is unable to boot anything AMD on my system. No Yos, No Cap, no nothing . At least, the r3259 (which is the first one fully compatible with El Capitan) is able to boot Yosemite. But again, El Cap = NO WAY !!! Same as you : "_" on a top left on the screen. This is just incomprehensible. I tried every relevant installing methods with no luck. So I would recommend to stick to latest Enoch r2775 which works fine as long as you configure your Extra folder correctly. See here and here. PS : Put kernel in root or use this boot-flag (assuming you put it in Extra folder) : <key>Kernel</key> <string>/Extra/kernel</string> Thank you, ill try it tomorrow Link to comment Share on other sites More sharing options...
Recommended Posts